Rear Seat Cup Holder & Snack Organizer for VW ID Buzz – Dual Bottle Holder

Rear Seat Cup Holder & Snack Organizer for VW ID Buzz – Dual Bottle Holder

Add convenient drink and snack storage to the rear passenger area of your Volkswagen ID. Buzz with this custom 3D-printed cup holder and organizer.

Designed to mount on the rounded plastic side panel of a compatible rear seat, this accessory provides two separate storage compartments for drinks, snacks, and small everyday items.

The design combines a circular bottle holder with a larger open compartment, making it especially practical for family trips, camping, road trips, and everyday travel.

Unlike traditional cup holders designed for center consoles, this organizer uses the side of the rear seat as its mounting location, keeping drinks and small items accessible to rear passengers.

━━━━━━━━━━━━━━━━━━

⚠️ IMPORTANT – PLEASE READ BEFORE ORDERING

• Designed for compatible Volkswagen ID. Buzz rear seats with the rounded plastic side panel shown in the listing photographs.

• THIS PRODUCT MOUNTS TO THE SIDE OF THE REAR SEAT, NOT TO THE CENTER CONSOLE OR DOOR PANEL.

• Different seating configurations and interior versions may have different trim shapes.

• Please compare your rear seat side panel carefully with the installation photographs before purchasing.

• The circular compartment was designed to accommodate bottles with a diameter of approximately 80mm (3.15 inches), according to the original design information. Actual fit depends on the shape of the bottle.

• This is a 3D-printed aftermarket accessory, not an original Volkswagen component.

• The product is supplied directly from the 3D printer without cosmetic post-processing. Visible printing layers and surface imperfections should be expected.

━━━━━━━━━━━━━━━━━━

🔹 FEATURES

• Custom cup holder and snack organizer for Volkswagen ID. Buzz

• Designed for mounting on the rounded plastic side panel of a compatible rear seat

• Two separate storage compartments

• One circular compartment for compatible bottles and drinks

• One larger open compartment for snacks and small accessories

• Convenient storage position for rear passengers

• Suitable for family road trips, camping, and everyday travel

• Compact integrated design

• No separate assembly of the organizer body required

• Useful for keeping small items accessible without occupying a passenger seat

• Independently manufactured using FDM 3D printing

━━━━━━━━━━━━━━━━━━

🚐 VEHICLE COMPATIBILITY

Designed for:

Volkswagen ID. Buzz

Mounting location:

Rounded plastic side panel of the rear seat, as shown in the product photographs.

This organizer is specifically shaped around the seat-side panel geometry used in the original design.

IMPORTANT FITMENT INFORMATION

Volkswagen ID. Buzz vehicles may have different rear seating arrangements, trim components, and interior configurations.

Before ordering:

• Examine the plastic side panel of your rear seat.

• Compare its shape with the installation photographs.

• Confirm that sufficient space is available for the organizer.

• Check that the mounting location does not interfere with seat adjustment, seat belts, or passenger access.

• Verify that the holder can be positioned safely in your particular seating configuration.

PLEASE COMPARE YOUR ORIGINAL SEAT PANEL, MOUNTING LOCATION, AND VEHICLE CONFIGURATION WITH THE LISTING PHOTOS BEFORE ORDERING.

Compatibility with every ID. Buzz seating configuration is not guaranteed.

━━━━━━━━━━━━━━━━━━

🥤 CUP HOLDER & BOTTLE STORAGE

The circular compartment is designed to hold compatible beverage bottles and containers.

The original design was modified to accommodate bottles approximately 80mm (3.15 inches) in diameter, providing additional space compared with smaller standard beverage can holders.

This makes the organizer useful for carrying larger water bottles during travel.

Bottle compatibility:

• Approximate intended maximum bottle diameter: 80mm (3.15 inches)

• Suitable for appropriately sized water bottles and beverage containers

• Actual fit depends on the bottle's shape, base design, and dimensions

• Oversized bottles or containers with unusual shapes may not fit correctly

The original designer referenced a SIGG Shield One 0.75L bottle as an example of the intended bottle size.

IMPORTANT: The stated diameter is based on the original design description and should not be interpreted as a guaranteed fit for every bottle measuring 80mm.

━━━━━━━━━━━━━━━━━━

🍿 SNACK & ACCESSORY COMPARTMENT

The second compartment features a larger open storage area.

It can be used for small everyday items such as:

• Packaged snacks

• Small personal accessories

• Travel essentials

• Other lightweight items that fit securely inside the compartment

The separated compartment design allows passengers to keep a beverage and another item close at hand.

Actual storage capacity depends on the shape and dimensions of the items.

Avoid overloading the organizer or placing heavy, sharp, or unsecured objects inside it.

━━━━━━━━━━━━━━━━━━

🧩 PRODUCT DESIGN & FUNCTION

This organizer uses a seat-mounted configuration rather than a traditional console-mounted cup holder.

The mounting section is shaped to follow the rounded plastic side panel of the compatible Volkswagen ID. Buzz rear seat.

The two storage compartments are arranged together as a single integrated body.

The circular section provides a dedicated space for a beverage container, while the adjacent larger compartment offers additional storage.

The design is particularly useful for rear passengers who want convenient access to drinks and snacks during longer journeys.

The product is manufactured as one physical 3D-printed organizer.

━━━━━━━━━━━━━━━━━━

🔧 INSTALLATION

Mounting location: Rounded plastic side panel of the rear seat.

Recommended installation procedure:

1. Locate the rounded plastic side panel on the compatible rear seat.

2. Compare the panel with the installation photographs to confirm that the shape corresponds to the organizer's mounting section.

3. Inspect the panel and surrounding area for possible obstructions.

4. Carefully position the organizer's mounting section against the seat-side panel, following the arrangement shown in the listing photographs.

5. Confirm that the organizer is properly seated and remains securely positioned.

6. Check clearance around the seat, adjacent trim, and passenger access areas.

7. Before placing a drink inside, check the stability of the organizer.

IMPORTANT INSTALLATION INFORMATION

• The mounting geometry is designed around the original seat-side panel shape shown in the photographs.

• Do not force the mounting section onto an incompatible panel.

• Check that the organizer does not interfere with seat adjustment or other moving components.

• Do not obstruct seat belt operation or access to any safety equipment.

• Check that the organizer remains securely mounted before using it during travel.

• Minor adjustment may be required depending on the vehicle's interior configuration and manufacturing tolerances.

━━━━━━━━━━━━━━━━━━

⚠️ SAFETY INFORMATION

• Ensure that the organizer is securely mounted before driving.

• Do not install it where it could interfere with seat belts, airbags, seat adjustment, or other safety-related components.

• Do not place excessively heavy objects inside the organizer.

• Use only beverage containers that fit securely.

• Avoid open containers that could spill during driving.

• Do not use the organizer as a handhold, step, or support for body weight.

• Regularly check the mounting security, particularly after carrying larger bottles.

• Keep loose or sharp objects secured to prevent them becoming hazards during sudden braking.

━━━━━━━━━━━━━━━━━━

🎨 SURFACE FINISH & RECOMMENDED POST-PROCESSING

IMPORTANT: THIS PRODUCT IS SUPPLIED DIRECTLY FROM THE 3D PRINTER WITHOUT COSMETIC POST-PROCESSING.

This organizer is manufactured using FDM 3D printing rather than factory injection molding.

The surface will naturally exhibit characteristics associated with the additive manufacturing process.

Please expect:

• Visible 3D printing layer lines

• Printing seams

• Possible support removal marks

• Minor surface irregularities

• Small differences in surface texture

THE PRODUCT WILL NOT HAVE THE PERFECTLY SMOOTH APPEARANCE OF AN INJECTION-MOLDED FACTORY COMPONENT.

These characteristics are normal for FDM-manufactured accessories.

For customers who prefer a smoother cosmetic finish, we recommend:

1. Light sanding of visible surfaces

2. Application of suitable plastic primer

3. Additional surface preparation if required

4. Painting in the desired finish

These steps are intended to improve cosmetic appearance and are not automatically required for normal installation.

PLEASE EXAMINE ALL LISTING PHOTOS CAREFULLY BEFORE PURCHASING.

━━━━━━━━━━━━━━━━━━

📦 PACKAGE CONTENTS

Each order includes:

• 1 × Rear seat cup holder and snack organizer for Volkswagen ID. Buzz

The single organizer incorporates:

• 1 × Circular bottle compartment

• 1 × Larger snack and accessory compartment

• Integrated seat-side mounting section

NOT INCLUDED:

• Water bottles or beverage cans

• Snacks

• Personal accessories shown in photographs

Only the physical 3D-printed organizer is supplied.

━━━━━━━━━━━━━━━━━━

⚠️ MANUFACTURING INFORMATION

This accessory is independently manufactured using FDM 3D printing.

The part is produced layer by layer, meaning that visible layer lines and minor cosmetic irregularities are normal.

The organizer is supplied in its 3D-printed finish without additional cosmetic smoothing.

Minor differences in printed surface appearance may occur between individual parts.

━━━━━━━━━━━━━━━━━━

📜 DESIGN ATTRIBUTION & LICENSE

Remixed design by user_385319078.

Based on an earlier ID. Buzz rear seat cup holder and snack holder design.

License: Creative Commons Attribution-ShareAlike (CC BY-SA), as indicated on the source model page.

Original design attribution and applicable license requirements remain in effect.

━━━━━━━━━━━━━━━━━━

⚠️ DISCLAIMER

This product is an independently manufactured aftermarket automotive accessory.

It is not an original Volkswagen component and is not manufactured, sponsored, approved, or endorsed by Volkswagen.

Volkswagen and ID. Buzz names are used solely to identify intended vehicle compatibility.

The buyer is responsible for verifying fitment, proper installation, and safe use before operating the vehicle.

Compatibility may vary depending on seat configuration, interior trim, and previous vehicle modifications.