MAF Delete Intake Pipe – Compatible with Nissan Skyline RB26DETT

MAF Delete Intake Pipe – Compatible with Nissan Skyline RB26DETT

Upgrade your Nissan Skyline intake configuration with a custom-designed MAF delete pipe, developed for modified RB26DETT engine setups using alternative engine management and airflow measurement systems.

This independently manufactured aftermarket component is designed to replace a compatible original Mass Air Flow (MAF) sensor pipe section, providing a continuous intake passage for custom engine configurations.

Intended for vehicles using properly configured MAP-based engine management or compatible standalone ECU systems, the adapter offers an alternative intake arrangement for performance builds, track cars, drift cars, and custom engine projects.

IMPORTANT: THIS PRODUCT IS NOT INTENDED FOR VEHICLES THAT STILL REQUIRE THE ORIGINAL MAF SENSORS FOR ENGINE MANAGEMENT.

PROPER ECU CONFIGURATION AND TUNING ARE REQUIRED BEFORE OPERATING THE ENGINE WITHOUT ITS ORIGINAL MAF SENSORS.

━━━━━━━━━━━━━━━━━━

🔹 FEATURES

• Custom-designed MAF delete intake pipe
• Developed for Nissan Skyline RB26DETT intake configurations
• Designed to replace a compatible original MAF sensor pipe section
• Provides an uninterrupted internal airflow passage
• Intended for MAP-based or compatible standalone ECU conversions
• Suitable for custom intake configurations
• Designed for modified turbocharged engine setups
• Can be incorporated into motorsport and performance-oriented projects
• Rigid 3D-printed construction
• Independently manufactured aftermarket intake accessory

━━━━━━━━━━━━━━━━━━

🚗 VEHICLE COMPATIBILITY

PRIMARY INTENDED APPLICATION:

• Nissan Skyline with RB26DETT engine

POTENTIAL ADDITIONAL COMPATIBILITY:

• Selected modified RB25-series turbocharged engine configurations

⚠️ IMPORTANT COMPATIBILITY WARNING

THIS PRODUCT IS DESIGNED FOR THE SPECIFIC INTAKE CONFIGURATION SHOWN IN THE LISTING PHOTOS.

Compatibility depends on the installed intake system, original MAF housing dimensions, pipe connections, turbocharger configuration, and engine management setup.

Additional engine applications have not been confirmed as direct replacements.

PLEASE COMPARE YOUR ORIGINAL MAF PIPE, CONNECTION DIAMETERS, AND INTAKE ARRANGEMENT WITH THE LISTING PHOTOS BEFORE ORDERING.

COMPATIBILITY WITH EVERY RB26DETT OR MODIFIED RB25 ENGINE CONFIGURATION IS NOT GUARANTEED.

━━━━━━━━━━━━━━━━━━

🧩 PRODUCT DESIGN & FUNCTION

MAF DELETE CONFIGURATION

The adapter is designed to replace a compatible original MAF sensor pipe section in an intake system that has been converted to operate without the factory MAF sensors.

This type of conversion is typically used with appropriately configured aftermarket engine management systems.

CONTINUOUS INTAKE PASSAGE

The pipe features an internal passage intended to provide a connection between compatible intake components without the original MAF sensor mounting arrangement.

Actual airflow characteristics depend on the full intake system, pipe geometry, turbocharger configuration, and surrounding components.

CUSTOM ENGINE MANAGEMENT APPLICATIONS

The pipe may be incorporated into suitable setups involving:

• MAP-based engine management
• Standalone ECU systems
• Custom turbocharged intake configurations
• Modified intake piping
• Motorsport and track vehicle builds

NO HORSEPOWER, TURBOCHARGER RESPONSE, AIRFLOW, OR ENGINE PERFORMANCE IMPROVEMENT IS GUARANTEED.

━━━━━━━━━━━━━━━━━━

🔧 INSTALLATION

1. Verify that your engine management system is configured to operate without the original MAF sensors.

2. Inspect the existing intake piping and MAF sensor arrangement.

3. Compare the original pipe connections with the replacement adapter shown in the listing photos.

4. Check the available installation space and surrounding engine components.

5. Remove the necessary original intake components.

6. Test-fit the MAF delete pipe before final installation.

7. Connect the pipe using suitable couplers, clamps, and mounting arrangements.

8. Verify that all connections are properly aligned and securely retained.

9. Ensure that the completed intake system is free from leaks and interference with moving or excessively hot components.

10. Have the engine management configuration verified and calibrated before operating the vehicle.

⚠️ CRITICAL ENGINE MANAGEMENT WARNING

REMOVING FACTORY MAF SENSORS WITHOUT APPROPRIATE ECU CONFIGURATION CAN CAUSE INCORRECT FUELING, POOR ENGINE OPERATION, OR ENGINE DAMAGE.

This pipe does not convert a factory MAF-based ECU into a MAP-based system.

A COMPATIBLE ENGINE MANAGEMENT SYSTEM AND PROFESSIONAL ECU TUNING ARE REQUIRED FOR A MAF DELETE CONVERSION.

DO NOT INSTALL THIS PRODUCT ON A VEHICLE THAT STILL DEPENDS ON THE ORIGINAL MAF SENSOR SIGNALS.

⚠️ ADDITIONAL INSTALLATION INFORMATION

Professional installation is strongly recommended.

Additional intake couplers, clamps, support brackets, or other components may be required depending on the vehicle setup.

Minor sanding or fitting adjustments may be necessary due to manufacturing tolerances.

Check that the installed pipe is adequately supported and that all connections remain secure under the intended operating conditions.

Turbocharged intake systems may experience elevated temperatures, pressure differences, and engine movement. The suitability of the completed installation must be assessed for the specific application.

━━━━━━━━━━━━━━━━━━

📦 PACKAGE CONTENTS

• 1 × MAF Delete Intake Pipe

TOTAL: 1 INTAKE PIPE INCLUDED.

NOT INCLUDED:

• MAF sensors
• MAP sensors
• Standalone ECU
• Intake filters
• Silicone couplers
• Hose clamps
• Mounting hardware
• Additional intake piping
• Engine tuning or calibration

━━━━━━━━━━━━━━━━━━

⚠️ MANUFACTURING INFORMATION

This product is manufactured using 3D printing.

Visible layer lines, support marks, surface texture, and minor cosmetic variations may be present as normal characteristics of the manufacturing process.

THE SURFACE WILL NOT BE PERFECTLY SMOOTH LIKE AN INJECTION-MOLDED FACTORY PART.

These characteristics are normal for 3D-printed aftermarket automotive accessories and do not necessarily indicate a manufacturing defect.

Minor fitting adjustments may be necessary depending on vehicle configuration and manufacturing tolerances.

Inspect the component before installation.

ENSURE THE INTERNAL AIRFLOW PASSAGE IS CLEAN AND FREE FROM LOOSE PRINTING MATERIAL BEFORE INSTALLATION.

Do not install components with cracks, deformation, damaged connections, or other structural defects.

━━━━━━━━━━━━━━━━━━

⚠️ DISCLAIMER

This is an independently manufactured aftermarket intake accessory.

Nissan, Skyline, and RB26DETT references are used solely to identify intended vehicle and engine compatibility.

References to other Nissan engine configurations indicate potential applications only and do not guarantee fitment.

This product is not an original Nissan component and is not manufactured, sponsored, approved, endorsed, or affiliated with Nissan.

This component is intended for appropriately configured modified engine applications and does not include any electronic conversion or engine management functionality.

The buyer is responsible for verifying intake compatibility, confirming the suitability of the material and component for the intended operating conditions, selecting appropriate installation hardware, and ensuring correct engine calibration.

Compliance with applicable vehicle emissions, inspection, and road-use regulations is the responsibility of the vehicle owner.