6.5–6.75 Inch Speaker Adapter Rings for Subaru & Audi – Pair, 82-8901 Fitment
Install compatible 6.5-inch or 6.75-inch aftermarket speakers in selected Subaru and Audi vehicles with this pair of speaker adapter rings. Originally developed for a 2017 Subaru Crosstrek, the design follows the vehicle mounting applications associated with the Metra 82-8901 adapter.
Sold as a pair. Each order includes two adapter rings for two speaker locations.
Design and features
The raised ring provides a mounting surface between the original speaker location and the aftermarket speaker. Integrated tabs accommodate both three-bolt and four-bolt speaker mounting patterns.
-
Designed for compatible 6.5-inch and 6.75-inch speakers
-
Three-bolt and four-bolt speaker mounting options
-
Multiple mounting positions around the ring
-
Side opening for routing speaker wiring
-
Left/right orientation markings
-
3D-printed construction
Subaru compatibility
The designer lists the following applications.
-
B9 Tribeca — 2006–2007
-
Crosstrek — 2016–2017
-
Forester — 1998–2013
-
Impreza — 2015–2019
-
WRX — 2015–2021
-
WRX STI — 2016–2021
-
XV Crosstrek — 2013–2015
Audi compatibility
The designer lists the following applications.
-
A6 — 2005–2011
-
A6 Quattro — 2005–2011
-
A7 — 2016–2017
-
A7 Quattro — 2015–2018
-
RS6 — 2010
-
RS7 — 2014–2018
-
S6 — 2007–2011
-
S7 — 2013–2018
Compare the original speaker mount, fixing locations, and intended door position before ordering. Fitment depends on the vehicle’s speaker location and audio configuration.
Speaker compatibility
Designed around nominal 6.5-inch and 6.75-inch aftermarket speakers. Check the speaker basket diameter, fixing pattern, mounting depth, and terminal clearance against the adapter.
Three-bolt and four-bolt mounting options provide flexibility, but the speaker’s frame and basket must also clear the internal tabs.
Wiring access
A side opening allows speaker wiring to pass through the ring when the cable approaches from the cabin side of the door. After routing the cable, seal the remaining gap with suitable automotive sealing material.
Installation
Test-fit each speaker in its adapter before mounting the assembly. Align the ring with the original fixing points and use hardware appropriate to the speaker and vehicle.
Check clearance behind the magnet, around the terminals, and beneath the door trim. Confirm window operation before final reassembly.
Surface finish
These adapters are manufactured using 3D printing. Layer lines and minor surface variations may be visible around the rings, mounting tabs, and cable openings.
Package contents
2 × speaker adapter rings for compatible 6.5-inch or 6.75-inch speakers.
Attribution
@AnthraxVX_3243392