Universal Splitter Diffuser Tunnel – 330mm ASA Underbody Aero Duct
Add a shaped diffuser tunnel to your custom front splitter with this ASA aerodynamic component. Originally developed for a track-focused fourth-generation Honda Civic, the design can be incorporated into other splitter installations with suitable mounting space and clearance.
The tapered body combines a curved airflow channel with a broad mounting flange and fixing holes around its perimeter.
Design and function
The tunnel transitions between narrow and wide sections, creating a shaped passage within a custom splitter assembly. It is intended to help manage airflow as part of a complete aerodynamic setup.
Its effect depends on the splitter geometry, installation position, ground clearance, and surrounding underbody layout.
Features
-
Universal design for custom splitter installations
-
Curved diffuser tunnel with a tapered footprint
-
Perimeter mounting flange with multiple fixing holes
-
330mm measured length
-
Manufactured in ASA plastic
-
Suitable for track car and custom aero projects
Dimensions
Approximate measurements from the supplied model screenshots.
-
Length — 330mm / 12.99 inches
-
Width across the indicated wide-end section — 305.29mm / 12.02 inches
-
Width across the narrow end — 165mm / 6.50 inches
-
Side-profile rise at the indicated section — approximately 42.43mm / 1.67 inches
Width measurements include the mounting flange at the indicated points. Refer to the dimension images when checking the required installation space.
Compatibility
Designed for custom front splitters with a suitable mounting surface.
The original application was a fourth-generation Honda Civic track car. Fitment to your vehicle depends on the splitter’s shape, available area, and attachment arrangement.
Compare the complete footprint and tunnel profile with your setup before ordering.
Installation
Test-position the tunnel on the splitter and plan the airflow opening and fixing locations before modifying the panel. Cutting or other fabrication may be required to integrate it into your installation.
Secure the component through its mounting flange using hardware appropriate to the splitter material and thickness. Check ground clearance and clearance from surrounding components throughout suspension movement.
Material and surface finish
Manufactured using ASA plastic for automotive applications requiring heat and UV resistance.
The 3D-printed surface may show layer lines, seams, and minor surface variations, particularly along the curved channel and flange edges. Additional sanding and painting can be carried out for a smoother cosmetic finish.
Package contents
1 × ASA splitter diffuser tunnel.
Attribution
@Antony · CC BY 4.0