Mercedes Benz Vito W639 165mm 6.5 Speaker Adapter Pair

Mercedes Benz Vito W639 165mm 6.5 Speaker Adapter Pair

Speaker adapter ring set designed for the Mercedes Benz Vito W639.
These adapters allow installation of compatible 165 mm / 6.5 inch aftermarket speakers using the factory speaker mounting area.
The raised adapter design provides approximately 25 mm of spacing for speaker installation.
Sold as a pair for left and right side.
====================
COMPATIBILITY
Designed for:
Mercedes Benz Vito W639
Compatible with suitable 165 mm / 6.5 inch speakers.
Please compare your original speaker mounting points and replacement speaker dimensions before ordering.
====================
DIMENSIONS
Speaker size: 165 mm / 6.5 inch
Inner diameter: approximately 144.5 mm
Adapter height: approximately 25 mm
Please verify your speaker dimensions before purchase.
====================
WHAT IS INCLUDED
2x Speaker Adapter Rings
Sold as a pair.
Speakers, screws, wiring, connectors, and other installation hardware are not included.
====================
FEATURES
Designed for Mercedes Benz Vito W639
Suitable for 165 mm / 6.5 inch speakers
25 mm raised adapter design
Pair for left and right side
Uses factory style mounting area
Useful for aftermarket audio upgrades
====================
IMPORTANT NOTES
This listing is for the speaker adapters only.
Speaker mounting dimensions can vary between manufacturers.
Please check speaker depth, mounting diameter, hole pattern, and available clearance before ordering.
Minor fitting or adjustment may be required depending on your specific speaker setup.
====================
FINISHING RECOMMENDATION
For the best possible appearance, we recommend lightly sanding the visible surfaces and painting the parts before installation.
This can help achieve a smoother and more uniform finished look.
====================
3D PRINTED PRODUCT NOTICE
This is a 3D printed automotive part.
Minor layer lines, surface texture, small cosmetic marks, slight irregularities, and other minor imperfections may be visible.
These are normal characteristics of the 3D printing process and are not considered defects.
They do not affect the intended function of the product.
Please do not expect the same surface finish as an injection molded factory part.