Double DIN Radio Fascia & Mounting Bracket for Mazda MX-5 Miata NB1 NB2 – 173.5 × 98mm Opening
Install a compatible Double DIN aftermarket head unit in your Mazda MX-5 / Miata NB with this combined radio fascia and mounting bracket. The design brings the front trim frame and side mounting sections together in one printed structure, providing a supported installation within the original dashboard opening.
It retains the factory dashboard screw mounting locations alongside the locking tabs.
Design and features
-
Designed for Mazda MX-5 / Miata NB1 and NB2
-
Double DIN radio installation frame
-
Integrated side brackets with head unit fixing holes
-
Mounting points for the original dashboard screws
-
Retained dashboard locking tabs
-
Rectangular fascia to finish the radio opening
-
3D-printed construction
Vehicle compatibility
Designed for the following Mazda MX-5 / Miata configurations.
Compare your dashboard radio opening and original mounting points with the product photos before ordering.
Opening dimensions
The supplied model measurements show an internal opening of approximately:
These dimensions refer to the measured opening at the indicated points. Check your head unit’s front section, casing, and mounting arrangement against the frame before ordering.
Head unit compatibility
The designer developed the mount around a Kenwood Double DIN head unit. An owner also reported a snug fit with a Pioneer DMH-A240.
Use these as fitment references and compare your specific radio’s dimensions and side screw positions. Double DIN head units can differ in faceplate shape, trim-ring size, and casing details.
Installation
Attach the side brackets to the compatible mounting points on the head unit using suitable screws. Position the assembly in the dashboard and secure it through the original screw mounting locations.
Check alignment of the locking tabs and front fascia before final tightening. Allow sufficient space behind the radio for connectors and wiring, then confirm that the surrounding dashboard trim seats correctly.
Surface finish
This part is manufactured using 3D printing. Visible layer lines and minor surface variations may appear on the fascia, side brackets, and retaining tabs. Please review the product photos for the expected printed appearance.
Package contents
1 × Double DIN radio installation frame with integrated fascia and side mounting brackets.
Attribution
Kristl3D · CC BY-SA