BMW E36 Headlight Air Intake Duct with 89–90mm LED Lamp Mount – Left or Right
Add a front-facing air inlet to your BMW E36 with this headlight replacement duct. The design combines a shaped intake opening with a separate circular mounting position for a compatible 89–90mm LED fog-light unit, allowing a custom airflow setup alongside an auxiliary light.
Removable mounting brackets provide adjustment during installation and can be replaced separately if damaged.
Available as a left-side or right-side version. Each order includes one duct assembly for the selected side.
Design and features
-
Headlight replacement air duct designed for BMW E36
-
Integrated mounting position for a compatible 89–90mm LED fog-light unit
-
Shaped air passage for custom intake or cooling applications
-
Separate screw-on mounting brackets
-
Horizontal adjustment at the mounting brackets
-
Provision for turn-signal height adjustment
-
Left-side and right-side versions available
-
3D-printed construction
Lamp compatibility
The circular lamp mount is designed around 89–90mm LED fog-light units.
This measurement refers to the intended lamp size, not the air duct outlet. Check the lamp’s housing dimensions, mounting arrangement, rear clearance, and wiring connections before purchasing components.
The LED light is purchased separately. Installing a fog-light unit in this housing does not automatically reproduce the original headlight’s lighting functions or beam pattern.
Vehicle fitment and side selection
Designed for BMW E36 vehicles with the corresponding headlight and indicator arrangement.
Choose:
Left and right are defined from inside the vehicle, facing forward. Compare your existing headlight shape, mounting points, and adjacent turn signal with the product images before ordering.
Adjustable mounting brackets
The supports attach to the duct with screws rather than being permanently integrated into the main housing. This allows positioning adjustments during installation and replacement of individual supports if required.
The design provides horizontal bracket adjustment and turn-signal height adjustment to help align the assembly with the surrounding bodywork.
Installation
Remove the original headlight assembly and test-fit the duct with its mounting brackets. Adjust the position and check the alignment with the grille, bodywork, and turn signal before tightening the fixings.
The design specifies four M6 × 25mm screws for assembly. Confirm the fastener arrangement during fitting and avoid overtightening against the printed parts.
Install and wire your compatible LED light separately. Any additional intake hose or cooling ducting should be supported independently, with adequate clearance from moving or hot components.
Airflow results depend on the complete ducting layout and vehicle setup.
Surface finish
These parts are manufactured using 3D printing. Layer lines and minor surface variations may be visible on the outer surround, intake passage, and mounting brackets.
Optional sanding, priming, and painting can be carried out for a smoother cosmetic finish.
Package contents
LED lamp, screws, wiring, hose, and clamps are not included.
Attribution
Auto_3DShop · Commercial License ACL-2026-001