Rear Ashtray Replacement Double Cup Holder – Compatible with BMW E46 Center Console

🥤 REAR ASHTRAY REPLACEMENT DOUBLE CUP HOLDER – COMPATIBLE WITH BMW E46

Upgrade the rear passenger area of your BMW E46 with this custom 3D-printed double cup holder, designed to replace the original rear center console ashtray.

This aftermarket accessory transforms the original ashtray location into a practical beverage storage area with two integrated cup positions.

The compact design provides a convenient solution for rear passengers who need additional drink storage without adding an external universal cup holder.

Suitable for BMW E46 interior upgrades, restoration projects, and replacing an unused rear ashtray with a more practical everyday accessory.

⚠️ IMPORTANT – PLEASE READ BEFORE ORDERING

THIS PRODUCT IS DESIGNED FOR THE REAR ASHTRAY LOCATION OF COMPATIBLE BMW E46 CENTER CONSOLES.

THIS IS NOT A FRONT DASHBOARD OR FRONT CUP HOLDER REPLACEMENT.

THE ORIGINAL REAR ASHTRAY MUST BE REMOVED FOR INSTALLATION.

THE PRODUCT FEATURES TWO INTEGRATED CUP HOLDER POSITIONS.

PLEASE COMPARE YOUR ORIGINAL REAR ASHTRAY, CENTER CONSOLE SHAPE, AND LISTING PHOTOS BEFORE ORDERING.

EXACT CUP DIAMETERS AND COMPATIBLE BOTTLE SIZES HAVE NOT BEEN CONFIRMED. PLEASE CHECK YOUR INTENDED DRINK CONTAINERS BEFORE PURCHASE.

THIS PRODUCT IS SUPPLIED DIRECTLY FROM THE 3D PRINTER WITHOUT COSMETIC POST-PROCESSING.

VISIBLE PRINTING LAYER LINES, SEAMS, SUPPORT MARKS, AND SURFACE IRREGULARITIES SHOULD BE EXPECTED.

PLEASE REVIEW ALL PRODUCT PHOTOS CAREFULLY. THE PRINTED SURFACE IS NOT PERFECTLY SMOOTH.

OPTIONAL SANDING, PRIMING, AND PAINTING ARE RECOMMENDED FOR A SMOOTHER, MORE FACTORY-INSPIRED APPEARANCE.

━━━━━━━━━━━━━━━━━━

🔹 FEATURES

• Custom rear ashtray replacement cup holder
• Designed for compatible BMW E46 interiors
• Two integrated beverage storage positions
• Replaces the original rear center console ashtray
• Practical upgrade for rear passenger drink storage
• Compact design for the existing center console location
• Factory-inspired interior integration
• Suitable for selected cups, cans, and small bottles
• No separate external cup holder bracket required
• Single-piece 3D-printed construction
• Suitable for interior restoration and daily use
• Independently manufactured aftermarket accessory

━━━━━━━━━━━━━━━━━━

🚗 VEHICLE COMPATIBILITY

DESIGNED FOR:

• BMW 3 Series E46

INSTALLATION LOCATION:

Rear center console – original rear ashtray position.

INTENDED APPLICATION:

Replacement of the original rear ashtray with a double cup holder.

⚠️ IMPORTANT COMPATIBILITY WARNING

THE VEHICLE MUST HAVE THE COMPATIBLE REAR ASHTRAY AND CENTER CONSOLE CONFIGURATION SHOWN IN THE LISTING PHOTOS.

BMW E46 interiors can vary depending on:

• Body style
• Production year
• Vehicle market
• Interior trim
• Factory center console equipment
• Original ashtray configuration
• Previous interior modifications

PLEASE COMPARE YOUR ORIGINAL REAR ASHTRAY OPENING AND SURROUNDING CONSOLE WITH THE PRODUCT PHOTOS BEFORE ORDERING.

COMPATIBILITY WITH EVERY BMW E46 BODY STYLE OR CENTER CONSOLE CONFIGURATION IS NOT GUARANTEED.

Do not assume compatibility with other BMW 3 Series generations.

━━━━━━━━━━━━━━━━━━

🧩 PRODUCT DESIGN & FUNCTION

REAR ASHTRAY REPLACEMENT

The cup holder is intended to occupy the original rear ashtray position.

This allows the unused ashtray area to be converted into convenient beverage storage for rear passengers.

DOUBLE CUP HOLDER DESIGN

The insert features two adjacent cup holder positions.

These may accommodate selected:

• Beverage cans
• Small water bottles
• Takeaway coffee cups
• Other appropriately sized drink containers

Actual compatibility depends on container diameter, shape, height, and weight.

IMPORTANT: NOT ALL CUPS OR BOTTLES WILL FIT.

COMPACT CENTER CONSOLE INTEGRATION

The design uses the existing rear console area instead of requiring a separate external mounting accessory.

FIXED CUP HOLDER CONSTRUCTION

The printed cup holder has no moving beverage-retaining mechanism.

The product is intended as a simple, functional replacement for the original ashtray.

IMPORTANT: THE HOLDER IS NOT A LOCKING OR SPILL-PROOF SYSTEM.

━━━━━━━━━━━━━━━━━━

📏 TECHNICAL SPECIFICATIONS

PRODUCT TYPE:

• Rear ashtray replacement
• Double beverage holder

VEHICLE APPLICATION:

• BMW E46

INSTALLATION LOCATION:

• Rear center console ashtray area

STORAGE CONFIGURATION:

• Two cup holder positions

PRODUCT CONSTRUCTION:

• FDM 3D-printed component

PACKAGE QUANTITY:

• 1 double cup holder insert

⚠️ IMPORTANT DIMENSION INFORMATION

Exact overall measurements and individual cup opening diameters have not been provided.

Before ordering, verify:

• Rear ashtray opening dimensions
• Original console shape
• Available installation depth
• Cup or bottle base diameter
• Beverage container height
• Rear passenger clearance

DO NOT RELY ON VEHICLE MODEL NAME ALONE TO CONFIRM FITMENT.

━━━━━━━━━━━━━━━━━━

🔧 INSTALLATION

REAR CENTER CONSOLE ASHTRAY REPLACEMENT

GENERAL INSTALLATION OVERVIEW:

1. Inspect the original BMW E46 rear center console.

2. Compare the original ashtray with the listing photos.

3. Confirm that your vehicle has the matching console configuration.

4. Carefully remove the original rear ashtray as required.

5. Inspect the available opening and original retaining features.

6. Clean the intended installation area.

7. Inspect the printed cup holder.

8. Test-fit the replacement in the original ashtray location.

9. Check the fit against surrounding console trim.

10. Verify that the holder is correctly positioned and adequately retained.

11. Make minor fitting adjustments if necessary.

12. Test with appropriately sized beverage containers.

IMPORTANT INSTALLATION INFORMATION

The original ashtray must be removed for installation.

The required retaining method depends on the original console arrangement and the finished part.

DO NOT FORCE THE CUP HOLDER INTO AN INCOMPATIBLE OPENING.

Minor sanding or fitting adjustments may be necessary because of manufacturing tolerances or differences in original vehicle components.

If additional mounting hardware or adhesive is needed for your particular installation, it must be supplied separately.

━━━━━━━━━━━━━━━━━━

⚠️ DRIVING SAFETY & BEVERAGE COMPATIBILITY

Before regular use, check that the installed cup holder:

• Is securely positioned
• Does not obstruct rear passenger movement
• Does not interfere with nearby console components
• Allows appropriately sized beverage containers to sit correctly
• Does not create sharp exposed edges

Use cups and bottles with secure lids whenever possible.

BEVERAGES ARE NOT GUARANTEED TO REMAIN SECURE DURING HARD CORNERING, SUDDEN BRAKING, OR COLLISIONS.

Avoid excessively tall, heavy, or unstable containers.

━━━━━━━━━━━━━━━━━━

🎨 SURFACE FINISH – PLEASE READ CAREFULLY

⚠️ THIS PRODUCT IS SUPPLIED DIRECTLY FROM THE 3D PRINTER.

IT IS NOT COSMETICALLY SANDED, PRIMED, PAINTED, OR POLISHED BEFORE SHIPPING.

FDM 3D printing produces visible surface characteristics, including:

• Layer lines
• Printing seams
• Support contact marks
• Layer transitions
• Small surface irregularities
• Differences in surface texture
• Other normal printing artifacts

THE PRODUCT WILL NOT HAVE THE PERFECTLY SMOOTH SURFACE OF AN INJECTION-MOLDED FACTORY COMPONENT.

PLEASE EXAMINE THE LISTING PHOTOS CAREFULLY BEFORE PURCHASING.

The cup holder is intended to be functional in its original printed condition when properly fitted.

For a smoother cosmetic finish, optional surface preparation is recommended.

━━━━━━━━━━━━━━━━━━

🛠️ RECOMMENDED COSMETIC POST-PROCESSING

For a more factory-inspired appearance:

1. Inspect the printed component.

2. Test-fit the holder in the original rear ashtray opening.

3. Identify any surfaces requiring minor adjustment.

4. Lightly sand visible layer lines and support marks.

5. Remove loose printing material.

6. Apply suitable plastic filler primer if desired.

7. Sand again for a more uniform surface.

8. Apply compatible automotive interior primer.

9. Finish with suitable automotive paint.

10. Allow all coatings to cure before installation.

TEST-FIT BEFORE PAINTING.

Avoid excessive sanding or coating buildup around the outer fitting surfaces and cup openings.

COSMETIC POST-PROCESSING IS OPTIONAL AND IS NOT INCLUDED.

━━━━━━━━━━━━━━━━━━

📦 PACKAGE CONTENTS

INCLUDED:

• 1 × BMW E46 Rear Ashtray Replacement Double Cup Holder

TOTAL: 1 PRINTED CUP HOLDER WITH TWO BEVERAGE POSITIONS.

NOT INCLUDED:

• Original rear ashtray
• Beverage cups or bottles
• Center console trim
• Mounting screws
• Adhesive
• Additional mounting hardware
• Installation tools
• Sanding materials
• Primer or paint

THIS LISTING INCLUDES THE 3D-PRINTED CUP HOLDER ONLY.

━━━━━━━━━━━━━━━━━━

⚠️ MANUFACTURING INFORMATION

This component is manufactured using FDM 3D printing.

The finished product has visible printed surface texture rather than a factory injection-molded finish.

VISIBLE LAYER LINES, PRINTING SEAMS, SUPPORT MARKS, AND MINOR COSMETIC IRREGULARITIES ARE NORMAL CHARACTERISTICS OF THE MANUFACTURING PROCESS.

THE PRODUCT IS SUPPLIED IN ITS ORIGINAL PRINTED CONDITION WITHOUT COSMETIC POST-PROCESSING.

Minor fitting adjustments may be necessary depending on manufacturing tolerances and the condition of the original center console.

BEFORE INSTALLATION:

• Inspect the holder for cracks or deformation
• Check the outer fitting surfaces
• Remove loose printing material
• Verify both cup holder openings are unobstructed
• Compare the component with the original ashtray location
• Confirm that the installed holder is stable

Do not install components with cracks, significant deformation, sharp edges, layer separation, or damaged retaining features.

━━━━━━━━━━━━━━━━━━

⚠️ DISCLAIMER

This is an independently manufactured aftermarket automotive interior accessory.

BMW, 3 Series, and E46 references are used solely to identify intended vehicle compatibility.

This product is not an original BMW component and is not manufactured, sponsored, approved, endorsed, or affiliated with BMW.

Factory-inspired styling does not imply original manufacturer production, licensing, certification, or approval.

The buyer is responsible for verifying center console compatibility, selecting an appropriate installation method, and ensuring safe use.

FINAL REMINDER:

• DESIGNED FOR COMPATIBLE BMW E46 REAR CENTER CONSOLES.

• REPLACES THE ORIGINAL REAR ASHTRAY.

• TWO INTEGRATED CUP HOLDER POSITIONS.

• ONE COMPLETE PRINTED COMPONENT INCLUDED.

• ORIGINAL ASHTRAY, CUPS, AND MOUNTING ACCESSORIES NOT INCLUDED.

• PLEASE COMPARE THE REAR CONSOLE OPENING WITH THE LISTING PHOTOS.

• SUPPLIED DIRECTLY FROM THE 3D PRINTER WITH VISIBLE SURFACE TEXTURE.

• OPTIONAL SANDING, PRIMING, AND PAINTING RECOMMENDED FOR A SMOOTHER FINISH.