Porsche Cayman 987.1 6.5" Speaker Adapter Ring Pair

Porsche Cayman 987.1 6.5" Speaker Adapter Ring Pair

Speaker adapter rings designed for the Porsche Cayman 987.1.
These adapter rings allow installation of compatible 6.5" 2-way speakers in place of the factory 8" subwoofer location.
Designed as a practical solution for custom audio upgrades while reusing the original mounting area.
Sold as a pair.
====================
COMPATIBILITY
Designed for:
Porsche Cayman 987.1
Factory door speaker / subwoofer location
Designed to adapt from the original 8" subwoofer position to a 6.5" speaker.
Please compare your original speaker housing, mounting area, and speaker dimensions before ordering.
====================
WHAT IS INCLUDED
2x Speaker Adapter Rings
Sold as a pair.
Speakers, screws, wiring, soldering materials, and other installation hardware are not included.
====================
FEATURES
Designed for Porsche Cayman 987.1
Converts factory 8" subwoofer position to a 6.5" speaker
Suitable for compatible 2-way speakers
5 mm thick ring design for added rigidity
Uses the factory mounting area
Simple solution for custom audio upgrades
====================
IMPORTANT NOTES
This listing is for the adapter rings only.
The original design was used with a 6.5" speaker upgrade in the factory location.
Outer holes center-to-center: 185 mm
Inner holes center-to-center: 155 mm
Holes may need to be drilled to final size after printing depending on your installation.
Please check your speaker size, hole spacing, and mounting requirements before purchase.
Installation may require wiring modification or soldering depending on your vehicle setup.
====================
INSTALLATION NOTES
The adapter ring is designed to mount the replacement speaker to the original speaker housing / mounting location.
The original setup used M4 hardware for attaching the speaker to the ring.
Original screws may be reused where compatible.
Please test fit all parts before final installation.
====================
FINISHING RECOMMENDATION
For the best possible appearance, we recommend lightly sanding the visible surfaces and painting the parts before installation.
This can help achieve a smoother and more uniform finished look.
====================
3D PRINTED PRODUCT NOTICE
This is a 3D printed automotive part.
Minor layer lines, surface texture, small cosmetic marks, slight irregularities, and other minor imperfections may be visible.
These are normal characteristics of the 3D printing process and are not considered defects.
They do not affect the intended function of the product.
Please do not expect the same surface finish as an injection-molded factory part.