Headlight Air Intake for BMW E46 Pre-Facelift Coupe & Convertible – 4-Inch / 102mm Duct
Create a front-facing air feed for your BMW E46 pre-facelift Coupe or Convertible with this shaped headlight intake. It occupies the matching headlight position and channels incoming air through a recessed opening toward a nominal 4-inch duct connection.
The contoured surround follows the headlight outline, providing a mounting point for custom intake ducting and a distinctive motorsport appearance.
Design and features
-
Designed for BMW E46 pre-facelift Coupe and Convertible applications
-
Shaped to fit the matching headlight opening
-
Open inlet with a recessed internal passage
-
Nominal 4-inch / approximately 102mm duct connection
-
Integrated mounting tabs
-
3D-printed construction
Vehicle compatibility
Designed for the following configurations with the headlight shape shown in the photos.
Compare your original headlight outline, mounting points, and surrounding panels before ordering. Match the required side to the product photos and check clearance behind the opening for your planned duct route.
Duct connection
The design specifies a 4-inch connection, equivalent to 101.6mm, commonly rounded to 102mm.
Check the actual connection dimensions against your chosen hose or duct before assembly. Hose fit depends on its internal diameter and how it attaches to the outlet.
The intake provides an entry point for air. Filtration and airflow to the engine depend on the filter, ducting, and complete intake arrangement.
Installation
Remove the corresponding headlight assembly and test-fit the intake in its mounting location. Check tab alignment and clearance around nearby components before securing it.
Custom fitting, sealing, or additional mounting hardware may be required depending on the vehicle and intake setup. Support connected ducting so its weight places minimal strain on the printed panel.
Surface finish
This component is manufactured using 3D printing. Layer lines and minor surface variations may be visible on the front surround, internal passage, duct connection, and mounting tabs.
Optional surface preparation and painting can be carried out for a smoother cosmetic finish.
Package contents
1 × headlight air intake with a nominal 4-inch duct connection.
Attribution
Andresssar · Commercial License