Fit a compatible Double DIN aftermarket head unit into your Nissan 300ZX Z31 with this replacement center dashboard bezel. The layout accommodates the radio beneath the original climate controls, keeping both within a shaped surround that follows the center console.
Supplied as one complete printed piece. Installation requires modification to the existing radio support structure.
Design and features
-
Designed for the Nissan 300ZX Z31 center dashboard
-
Radio opening approximately 178 × 104mm
-
Upper opening accommodates the original climate control panel
-
Climate controls retain their factory location
-
Integrated horizontal divider and shaped outer frame
-
Printed as a single complete bezel
-
3D-printed construction
Radio opening dimensions
These measurements refer to the radio opening. Compare them with the section of your head unit that passes through the bezel, including any trim fitted around it.
Vehicle compatibility
Designed for the Nissan 300ZX Z31 with the dashboard arrangement shown in the installation photos.
Compare your original center panel, climate controls, and surrounding trim with the photos before ordering. Check any previous radio or dashboard modifications that could affect installation.
Head unit compatibility
Intended for a compatible Double DIN aftermarket radio.
Check the head unit’s front-panel dimensions, casing depth, mounting arrangement, and connector clearance against the available space. Faceplate and trim-ring dimensions vary between radios.
Installation requirements
The original radio support structure must be modified to accommodate the Double DIN installation. Plan the radio mounting arrangement and test-fit the bezel and head unit before making changes.
The climate control panel can remain in its original position above the radio. Check access to its connections and clearance around the radio wiring before final assembly.
Secure the head unit using suitable mounting hardware and supports, then fit the bezel around the completed installation.
One-piece construction and finish
The complete bezel is printed in one piece, including the outer surround and central divider.
Visible layer lines and minor surface variations may appear on the front face, edges, and inner surfaces. The supplied product photo shows the printed appearance. Optional sanding, priming, and painting can be carried out for a smoother cosmetic finish.
Package contents
1 × one-piece Double DIN radio bezel for Nissan 300ZX Z31.
Attribution
DannysCreations · CC BY-SA