Keep a drink and your phone together in your BMW E46’s center console with this combined cup holder and storage tray. This updated design adds a recess for a compatible MagSafe-style charging puck, with a TPU mat covering the charger area.
The elongated insert combines a recessed phone tray and a circular drink holder with movable retaining hooks. Mounting pins for the hooks are included.
Design and features
-
Designed for the BMW E46 center console
-
Cup holder for containers up to approximately 70mm in diameter
-
Pivoting retaining hooks to support smaller containers
-
Included pins for mounting the hooks
-
Elastic-band tensioning around the retaining hooks
-
Recessed tray for a phone or small essentials
-
Integrated slot for a compatible MagSafe-style charging puck
-
TPU tray mat included
-
3D-printed construction
Cup holder and retaining hooks
The circular compartment accommodates drink containers up to approximately 70mm / 2.76 inches in diameter.
Movable hooks around the cup holder help secure narrower cans and bottles. An elastic band runs around all the hooks, seated in their designated slots. The band applies inward tension while allowing the hooks to move outward as a drink is inserted.
This mechanism adapts the grip to smaller containers and helps reduce movement inside the holder.
Hook assembly and included pins
Use the included pins to attach the retaining hooks to their mounting points. Secure each pin in its supports while keeping the hook free to pivot. If adhesive is used to retain a pin, keep it clear of the moving joint.
You can also substitute suitable screws and nuts or alternative pivot hardware. Choose hardware that fits the mounting holes and adjust it so the hooks move freely.
Fit an elastic band around all the hooks and seat it in the retaining slots. Check that every hook moves outward smoothly and returns inward under the band’s tension.
Phone tray and TPU mat
The original tray layout accommodates items up to approximately 150 × 75mm / 5.91 × 2.95 inches. Check your phone’s dimensions with its case fitted against the available tray space.
The included TPU mat sits over the charger area and provides a flexible contact surface for your phone.
MagSafe charger fitment
The recess is intended to house a compatible MagSafe-style charging puck. The remix designer used a third-party puck described as having matching dimensions.
Check the charger’s diameter, thickness, and cable exit against the recess before fitting. Charging operation depends on the installed charger, power supply, phone, case, and alignment beneath the mat.
Vehicle compatibility
Designed for the BMW E46 with the matching center console insert location.
Compare your console opening, attachment points, and available depth with the product photos before ordering.
Installation
Test-fit the insert in the console and check that its mounting features align correctly. Fit the compatible charging puck into its recess and route the cable with sufficient clearance beneath the tray.
Check the retaining hooks for free movement and correct elastic-band placement, then position the TPU mat over the phone tray.
Surface finish
The printed body may show visible layer lines and minor surface marks around its edges, cup compartment, hooks, and mounting features. The flexible TPU mat forms the upper contact surface in the tray.
Package contents
Attribution
FonnAndiBank
eldeberde · CC BY-SA