BMW E36 Front Turn Signal Air Duct for Sedan Compact Touring 

BMW E36 Front Turn Signal Air Duct for Sedan Compact Touring 

Front air duct compatible with BMW E36 Sedan, Compact, and Touring models, designed to replace the front turn signal.
Features an open inlet without a central divider and a shaped internal funnel leading to a round outlet.
Suitable for custom air routing setups with compatible ducting.

====================
COMPATIBILITY

Designed for:
BMW E36 Sedan
BMW E36 Compact
BMW E36 Touring

Installation position: front turn signal location.

Please compare the product photos, shape, dimensions, and installation side with your vehicle before ordering.

====================
WHAT IS INCLUDED

Front turn signal air duct as shown in the product photos.

Please check the listing options for the supplied quantity and installation side.

====================
FEATURES

Compatible with BMW E36 Sedan, Compact, and Touring
Replaces the front turn signal
Open inlet without a central divider
Shaped internal funnel with a round outlet
Suitable for custom ducting installations
3D printed construction
Can be sanded and painted for a more refined finish

====================
IMPORTANT NOTES

This listing is for the air duct only.
Additional ducting and mounting components may be required.
Please check the outlet diameter, mounting requirements, and available clearance before purchase.
This part replaces a front turn signal and does not provide a turn signal function.
Check applicable road-use requirements before installation.
Professional installation is recommended if you are unsure about fitment.

====================
FINISHING RECOMMENDATION

For the best possible appearance, we recommend lightly sanding the visible surfaces, applying a suitable primer, and painting the part before installation.
This can help achieve a smoother and more uniform finish.
Use preparation methods and coatings suitable for the printed material.

====================
3D PRINTED PRODUCT NOTICE

This is a 3D printed automotive part.
Minor layer lines, surface texture, small cosmetic marks, and slight surface irregularities may be visible.
These are normal characteristics of the 3D printing process.
Please do not expect the same surface finish as an injection-molded factory part.