{"product_id":"mazda-rx-8-center-console-gauge-pod-3-52mm-angled-insert-with-hood","title":"Mazda RX-8 Center Console Gauge Pod – 3×52mm Angled Insert with Hood","description":"\u003cp\u003eMazda RX-8 Center Console Gauge Pod – 3×52mm Angled Insert with Hood\u003c\/p\u003e\n\u003cp\u003eAdd a custom 3-gauge setup to your Mazda RX-8 interior with this center console gauge pod, designed to be molded into the factory center dash \/ console panel.\u003c\/p\u003e\n\u003cp\u003eThis pod is made for 3× 52mm gauges and was originally designed around Defi BF-style gauges. The gauge angle is aimed toward the driver for better visibility, and the small built-in hood helps reduce sunlight glare on the gauge faces.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Mazda RX-8 center dash \/ center console area\u003cbr\u003e3-gauge layout for standard 52mm gauges\u003cbr\u003eOriginally designed around Defi BF-style gauges\u003cbr\u003eGauge angles are aimed toward the driver\u003cbr\u003eSmall integrated hood helps reduce sunlight glare\u003cbr\u003eDesigned to recess into the center dash panel\u003cbr\u003eUses the available space behind the center panel area\u003cbr\u003eClean custom interior upgrade when finished properly\u003cbr\u003eGood option for performance builds, track cars, turbo builds, and custom dashboards\u003cbr\u003eSuitable for oil pressure, oil temperature, boost, AFR, voltage, or similar gauges\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eMazda RX-8\u003c\/p\u003e\n\u003cp\u003eInstallation location:\u003cbr\u003eCenter dash \/ center console panel area\u003c\/p\u003e\n\u003cp\u003eGauge details:\u003cbr\u003eDesigned for 3× 52mm gauges\u003c\/p\u003e\n\u003cp\u003eImportant fitment note:\u003cbr\u003eThis is not a simple drop-in part.\u003cbr\u003eThe factory center dash \/ console panel must be cut, fitted, bonded, filled, sanded, and painted for proper installation.\u003cbr\u003eProfessional or experienced custom installation is strongly recommended.\u003c\/p\u003e\n\u003cp\u003eInstallation overview:\u003cbr\u003eRemove the center dash \/ console panel from the vehicle\u003cbr\u003eCheck the space behind the panel before cutting\u003cbr\u003eUse the gauge pod as a guide\/template for marking the opening\u003cbr\u003eCut the opening carefully, usually with a rotary tool such as a Dremel\u003cbr\u003eTrim and adjust the fit gradually until the pod sits correctly\u003cbr\u003eThe pod is designed to recess slightly into the dash panel\u003cbr\u003eBond the pod into the panel using suitable plastic\/bodywork materials\u003cbr\u003eAdditional reinforcement from the rear side is recommended\u003cbr\u003eFilling, sanding, primer, and paint are required for a finished OEM-style look\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eConsole modification is required\u003cbr\u003eCutting, sanding, bonding, filling, and finishing are needed\u003cbr\u003eOriginal designer’s installation instructions can be found on the RX8Club forum\u003cbr\u003eFinal finish depends on the installer’s bodywork and painting quality\u003cbr\u003eGauges, wiring, sensors, adhesive, fiberglass, filler, primer, paint, and hardware are not included\u003cbr\u003eInstall only if you understand how the part should be fitted and finished\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for hot car interiors\u003cbr\u003eUV-stable – ideal for long-term use\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines, support marks, or surface marks may be visible. Sanding, filling, priming, and painting are recommended for a smooth final cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Mazda RX-8 Center Console Gauge Pod\u003c\/p\u003e\n\u003cp\u003eGauges, wiring, sensors, adhesive, fiberglass, filler, primer, paint, and installation materials are not included.\u003c\/p\u003e\n\u003cp\u003eDesign Attribution\u003c\/p\u003e\n\u003cp\u003eOriginal design by pmtardy, licensed under the Creative Commons Attribution-ShareAlike license.\u003c\/p\u003e\n\u003cp\u003eThis product is a physical 3D-printed part made and sold by CarCultureCyprus. Original designer is not affiliated with this shop and does not endorse this product.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57963443356031,"sku":null,"price":90.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/rx87.png?v=1783977769","url":"https:\/\/www.carculturecyprus.com\/products\/mazda-rx-8-center-console-gauge-pod-3-52mm-angled-insert-with-hood","provider":"Car Culture Cyprus","version":"1.0","type":"link"}