{"product_id":"mazda-miata-nb1-fog-light-intake-funnel-set-pair-of-2","title":"Mazda Miata NB1 Fog Light Intake Funnel Set – Pair of 2","description":"\u003cp\u003eMazda Miata NB1 Fog Light Intake Funnel Set – Pair of 2\u003c\/p\u003e\n\u003cp\u003eUpgrade the front airflow on your Mazda Miata NB1 with this fog light intake funnel set, designed to replace the original fog lights and route fresh air through the fog light openings. These funnels attach to the factory fog light bracket area and are intended for custom intake, brake cooling, or general airflow projects.\u003c\/p\u003e\n\u003cp\u003ePlease note: this is not a plug-and-play part. Minor trimming, fitting, and adjustment are required during installation. This product is intended for custom intake or cooling airflow setups and should be installed by someone who understands how to route ducting and modify the fender liner area if needed. Read full description please.\u003c\/p\u003e\n\u003cp\u003eSold as a set of 2 pieces.\u003c\/p\u003e\n\u003cp\u003eImportant: this design is for NB1 Miata only and does not fit NB2.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Mazda Miata NB1\u003c\/p\u003e\n\u003cp\u003eDoes not fit NB2\u003c\/p\u003e\n\u003cp\u003eSold as a complete set of 2 pieces\u003c\/p\u003e\n\u003cp\u003eReplaces the factory fog lights with intake funnels\u003c\/p\u003e\n\u003cp\u003eAttaches to the factory fog light bracket area\u003c\/p\u003e\n\u003cp\u003eDesigned for use with 2 inch accordion duct tubing\u003c\/p\u003e\n\u003cp\u003eUseful for custom intake airflow or cooling projects\u003c\/p\u003e\n\u003cp\u003eGood option for track-style or performance-focused builds\u003c\/p\u003e\n\u003cp\u003eStrong and durable construction\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eMain compatibility:\u003c\/p\u003e\n\u003cp\u003eMazda Miata NB1\u003c\/p\u003e\n\u003cp\u003eImportant fitment note:\u003c\/p\u003e\n\u003cp\u003eThis part is designed for NB1 Miata only\u003c\/p\u003e\n\u003cp\u003eDoes not work on NB2\u003c\/p\u003e\n\u003cp\u003eThis is not a plug-and-play installation\u003c\/p\u003e\n\u003cp\u003eMinor trimming, fitting, and adjustment are required\u003c\/p\u003e\n\u003cp\u003ePlease compare your fog light area and factory bracket setup before ordering\u003c\/p\u003e\n\u003cp\u003eFactory fog light brackets are required to install this piece\u003c\/p\u003e\n\u003cp\u003eThis listing is for the printed funnels only\u003c\/p\u003e\n\u003cp\u003eAccordion tubing, brackets, hardware, clamps, and any extra ducting parts are not included unless specifically stated\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eThe funnel secures to the factory bracket that holds the OEM fog light\u003c\/p\u003e\n\u003cp\u003eThe lower securing tabs straddle the bracket\u003c\/p\u003e\n\u003cp\u003eOEM fog light brackets are needed to install the part\u003c\/p\u003e\n\u003cp\u003eRequires 2 inch accordion tube for routing air\u003c\/p\u003e\n\u003cp\u003eThe tube is typically routed in the fender behind the factory liner\u003c\/p\u003e\n\u003cp\u003eTrimming of the upper section of the fender liner is required because a large securing flap can block tube routing\u003c\/p\u003e\n\u003cp\u003eCut the flap at the seam where it extends perpendicular from the liner\u003c\/p\u003e\n\u003cp\u003eInstallation may be possible without removing the bumper or wheel in some cases\u003c\/p\u003e\n\u003cp\u003eTurning the wheel fully can provide more access to route and secure the ducting\u003c\/p\u003e\n\u003cp\u003eA 10 mm flex head ratcheting wrench is recommended for easier installation\u003c\/p\u003e\n\u003cp\u003eTest fit everything before final assembly\u003c\/p\u003e\n\u003cp\u003eInstallation should be carried out by someone who understands custom vehicle fitting and airflow duct routing\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for automotive use\u003c\/p\u003e\n\u003cp\u003eUV-stable – ideal for long-term use\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for custom automotive airflow applications\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Fog Light Intake Funnels\u003c\/p\u003e\n\u003cp\u003eComplete set of 2 pieces\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Gray","offer_id":57814324609407,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":57814324642175,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/nb7.png?v=1782143194","url":"https:\/\/www.carculturecyprus.com\/products\/mazda-miata-nb1-fog-light-intake-funnel-set-pair-of-2","provider":"Car Culture Cyprus","version":"1.0","type":"link"}