{"product_id":"ford-fiesta-st150-cold-air-intake-box-kit","title":"Ford Fiesta ST150 Cold Air Intake Box Kit","description":"\u003cp\u003eFord Fiesta ST150 Cold Air Intake Box Kit\u003c\/p\u003e\n\u003cp\u003eUpgrade your Ford Fiesta ST150 with this custom cold air intake box kit, designed for performance intake builds where the original battery has been relocated from the engine bay. This is a large multi-piece printed airbox setup made for custom 70 mm intake layouts, giving you a cleaner way to build a cold air feed system in the ST150 engine bay.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed for serious custom builds, track-style setups, and owners who want a proper enclosed intake box solution instead of a simple open cone filter.\u003c\/p\u003e\n\u003cp\u003eImportant: the intake box must be protected with thermal foil \/ heat reflective tape before use. The part is installed in the engine bay near heat sources, so proper heat protection is required for long-term durability.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Ford Fiesta ST150\u003c\/p\u003e\n\u003cp\u003eCustom cold air intake box kit\u003c\/p\u003e\n\u003cp\u003eLarge multi-piece airbox design\u003c\/p\u003e\n\u003cp\u003eDesigned for 70 mm intake pipe layouts\u003c\/p\u003e\n\u003cp\u003eSuitable for builds with battery relocation\u003c\/p\u003e\n\u003cp\u003eHelps create a cleaner enclosed intake setup\u003c\/p\u003e\n\u003cp\u003eSide inlet allows connection of a cold air feed\u003c\/p\u003e\n\u003cp\u003eModular design for easier printing, assembly, and installation\u003c\/p\u003e\n\u003cp\u003eUseful for custom intake, performance, and track-style builds\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA for improved heat resistance compared to common PLA-style materials\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eMain compatibility:\u003c\/p\u003e\n\u003cp\u003eFord Fiesta ST150\u003c\/p\u003e\n\u003cp\u003eEngine:\u003c\/p\u003e\n\u003cp\u003e2.0 petrol ST150\u003c\/p\u003e\n\u003cp\u003eImportant installation requirement:\u003c\/p\u003e\n\u003cp\u003eBattery relocation is required\u003c\/p\u003e\n\u003cp\u003eThis kit is designed for cars where the battery has been relocated to the boot \/ trunk\u003c\/p\u003e\n\u003cp\u003eIt will not fit correctly with the factory battery still in the original engine bay position\u003c\/p\u003e\n\u003cp\u003eIntake setup notes:\u003c\/p\u003e\n\u003cp\u003eDesigned around a 70 mm intake layout\u003c\/p\u003e\n\u003cp\u003eSuitable for use with 70 mm OD aluminium connector pieces\u003c\/p\u003e\n\u003cp\u003eCan be used with silicone intake hose bends such as 30 degree and 90 degree bends, trimmed to suit your setup\u003c\/p\u003e\n\u003cp\u003eA suitable air filter is required inside the box\u003c\/p\u003e\n\u003cp\u003eA cold air feed can be connected to the side inlet\u003c\/p\u003e\n\u003cp\u003eHeat protection requirement:\u003c\/p\u003e\n\u003cp\u003eThe printed intake box must be wrapped or protected with thermal foil, heat reflective tape, or similar heat shielding before installation\u003c\/p\u003e\n\u003cp\u003eDo not use the printed box bare in the engine bay without heat protection\u003c\/p\u003e\n\u003cp\u003eHeat shielding helps protect the part from engine bay temperatures and improves long-term durability\u003c\/p\u003e\n\u003cp\u003eHardware required:\u003c\/p\u003e\n\u003cp\u003eM6 nuts\u003c\/p\u003e\n\u003cp\u003eM6 bolts\u003c\/p\u003e\n\u003cp\u003eM6 washers\u003c\/p\u003e\n\u003cp\u003eHose clamps or suitable fasteners for intake hose connections\u003c\/p\u003e\n\u003cp\u003eImportant fitment note:\u003c\/p\u003e\n\u003cp\u003eThis is not a complete ready-to-install intake kit\u003c\/p\u003e\n\u003cp\u003eThis listing is for the printed airbox parts only\u003c\/p\u003e\n\u003cp\u003eAir filter, silicone hoses, aluminium connectors, hose clamps, M6 hardware, thermal foil, and mounting hardware are not included unless specifically selected\u003c\/p\u003e\n\u003cp\u003eThis setup may require trimming, test fitting, adjustment, and custom installation work\u003c\/p\u003e\n\u003cp\u003eThe box does not include fixed mounting brackets and is normally held securely in place by the intake hose connections and clamps\u003c\/p\u003e\n\u003cp\u003eInstallation should be carried out by someone who understands custom intake fitting, engine bay clearance, and safe routing of intake parts\u003c\/p\u003e\n\u003cp\u003eAlways check clearance from hot, moving, and electrical components before use\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eLarge 3D-printed multi-piece kit\u003c\/p\u003e\n\u003cp\u003eHeat-resistant compared to standard PLA-style materials\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eSuitable for custom automotive use when properly installed and heat protected\u003c\/p\u003e\n\u003cp\u003eThermal foil \/ heat reflective tape is required for engine bay use\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Cold Air Intake Box Main Body\u003c\/p\u003e\n\u003cp\u003e1× Intake Box Cover \/ End Plate\u003c\/p\u003e\n\u003cp\u003e1× Inlet Adapter Section\u003c\/p\u003e\n\u003cp\u003e1× Side Air Feed \/ Duct Adapter\u003c\/p\u003e\n\u003cp\u003ePrinted intake box parts only\u003c\/p\u003e\n\u003cp\u003eAttribution:\u003c\/p\u003e\n\u003cp\u003eBased on the original design “ST150 Cold Air Intake” by Jmarriott03.\u003c\/p\u003e\n\u003cp\u003eGreat design — thank you for sharing it with the community.\u003c\/p\u003e\n\u003cp\u003eAll design credit goes to the original designer.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57809906368895,"sku":null,"price":200.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/st8.png?v=1782075767","url":"https:\/\/www.carculturecyprus.com\/products\/ford-fiesta-st150-cold-air-intake-box-kit","provider":"Car Culture Cyprus","version":"1.0","type":"link"}