{"product_id":"rear-seat-cup-holder-snack-organizer-for-vw-id-buzz-dual-bottle-holder","title":"Rear Seat Cup Holder \u0026 Snack Organizer for VW ID Buzz – Dual Bottle Holder","description":"\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eRear Seat Cup Holder \u0026amp; Snack Organizer for VW ID Buzz – Dual Bottle Holder\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eAdd convenient drink and snack storage to the rear passenger area of your Volkswagen ID. Buzz with this custom 3D-printed cup holder and organizer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned to mount on the rounded plastic side panel of a compatible rear seat, this accessory provides two separate storage compartments for drinks, snacks, and small everyday items.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe design combines a circular bottle holder with a larger open compartment, making it especially practical for family trips, camping, road trips, and everyday travel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUnlike traditional cup holders designed for center consoles, this organizer uses the side of the rear seat as its mounting location, keeping drinks and small items accessible to rear passengers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e⚠️ \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eIMPORTANT – PLEASE READ BEFORE ORDERING\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Designed for compatible Volkswagen ID. Buzz rear seats with the rounded plastic side panel shown in the listing photographs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eTHIS PRODUCT MOUNTS TO THE SIDE OF THE REAR SEAT, NOT TO THE CENTER CONSOLE OR DOOR PANEL.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Different seating configurations and interior versions may have different trim shapes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Please compare your rear seat side panel carefully with the installation photographs before purchasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• The circular compartment was designed to accommodate bottles with a diameter of approximately 80mm (3.15 inches), according to the original design information. Actual fit depends on the shape of the bottle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• This is a 3D-printed aftermarket accessory, not an original Volkswagen component.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• The product is supplied directly from the 3D printer without cosmetic post-processing. Visible printing layers and surface imperfections should be expected.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e🔹 \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFEATURES\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Custom cup holder and snack organizer for Volkswagen ID. Buzz\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Designed for mounting on the rounded plastic side panel of a compatible rear seat\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Two separate storage compartments\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• One circular compartment for compatible bottles and drinks\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• One larger open compartment for snacks and small accessories\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Convenient storage position for rear passengers\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Suitable for family road trips, camping, and everyday travel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Compact integrated design\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• No separate assembly of the organizer body required\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Useful for keeping small items accessible without occupying a passenger seat\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Independently manufactured using FDM 3D printing\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e🚐 \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eVEHICLE COMPATIBILITY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDesigned for:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVolkswagen ID. Buzz\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eMounting location:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRounded plastic side panel of the rear seat, as shown in the product photographs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis organizer is specifically shaped around the seat-side panel geometry used in the original design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eIMPORTANT FITMENT INFORMATION\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVolkswagen ID. Buzz vehicles may have different rear seating arrangements, trim components, and interior configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBefore ordering:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Examine the plastic side panel of your rear seat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Compare its shape with the installation photographs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Confirm that sufficient space is available for the organizer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Check that the mounting location does not interfere with seat adjustment, seat belts, or passenger access.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Verify that the holder can be positioned safely in your particular seating configuration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePLEASE COMPARE YOUR ORIGINAL SEAT PANEL, MOUNTING LOCATION, AND VEHICLE CONFIGURATION WITH THE LISTING PHOTOS BEFORE ORDERING.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatibility with every ID. Buzz seating configuration is not guaranteed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e🥤 \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eCUP HOLDER \u0026amp; BOTTLE STORAGE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe circular compartment is designed to hold compatible beverage bottles and containers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe original design was modified to accommodate bottles approximately 80mm (3.15 inches) in diameter, providing additional space compared with smaller standard beverage can holders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis makes the organizer useful for carrying larger water bottles during travel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eBottle compatibility:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Approximate intended maximum bottle diameter: 80mm (3.15 inches)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Suitable for appropriately sized water bottles and beverage containers\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Actual fit depends on the bottle's shape, base design, and dimensions\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Oversized bottles or containers with unusual shapes may not fit correctly\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe original designer referenced a SIGG Shield One 0.75L bottle as an example of the intended bottle size.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eIMPORTANT:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e The stated diameter is based on the original design description and should not be interpreted as a guaranteed fit for every bottle measuring 80mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e🍿 \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eSNACK \u0026amp; ACCESSORY COMPARTMENT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe second compartment features a larger open storage area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt can be used for small everyday items such as:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Packaged snacks\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Small personal accessories\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Travel essentials\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Other lightweight items that fit securely inside the compartment\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe separated compartment design allows passengers to keep a beverage and another item close at hand.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActual storage capacity depends on the shape and dimensions of the items.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAvoid overloading the organizer or placing heavy, sharp, or unsecured objects inside it.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e🧩 \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ePRODUCT DESIGN \u0026amp; FUNCTION\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis organizer uses a seat-mounted configuration rather than a traditional console-mounted cup holder.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe mounting section is shaped to follow the rounded plastic side panel of the compatible Volkswagen ID. Buzz rear seat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe two storage compartments are arranged together as a single integrated body.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe circular section provides a dedicated space for a beverage container, while the adjacent larger compartment offers additional storage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe design is particularly useful for rear passengers who want convenient access to drinks and snacks during longer journeys.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe product is manufactured as one physical 3D-printed organizer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e🔧 \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eINSTALLATION\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eMounting location: Rounded plastic side panel of the rear seat.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended installation procedure:\u003c\/span\u003e\u003c\/p\u003e\n\u003col data-spread=\"true\" start=\"1\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eLocate the rounded plastic side panel on the compatible rear seat.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eCompare the panel with the installation photographs to confirm that the shape corresponds to the organizer's mounting section.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eInspect the panel and surrounding area for possible obstructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eCarefully position the organizer's mounting section against the seat-side panel, following the arrangement shown in the listing photographs.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eConfirm that the organizer is properly seated and remains securely positioned.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eCheck clearance around the seat, adjacent trim, and passenger access areas.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eBefore placing a drink inside, check the stability of the organizer.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eIMPORTANT INSTALLATION INFORMATION\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• The mounting geometry is designed around the original seat-side panel shape shown in the photographs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Do not force the mounting section onto an incompatible panel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Check that the organizer does not interfere with seat adjustment or other moving components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Do not obstruct seat belt operation or access to any safety equipment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Check that the organizer remains securely mounted before using it during travel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Minor adjustment may be required depending on the vehicle's interior configuration and manufacturing tolerances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e⚠️ \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eSAFETY INFORMATION\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Ensure that the organizer is securely mounted before driving.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Do not install it where it could interfere with seat belts, airbags, seat adjustment, or other safety-related components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Do not place excessively heavy objects inside the organizer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Use only beverage containers that fit securely.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Avoid open containers that could spill during driving.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Do not use the organizer as a handhold, step, or support for body weight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Regularly check the mounting security, particularly after carrying larger bottles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Keep loose or sharp objects secured to prevent them becoming hazards during sudden braking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e🎨 \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eSURFACE FINISH \u0026amp; RECOMMENDED POST-PROCESSING\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eIMPORTANT: THIS PRODUCT IS SUPPLIED DIRECTLY FROM THE 3D PRINTER WITHOUT COSMETIC POST-PROCESSING.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis organizer is manufactured using FDM 3D printing rather than factory injection molding.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe surface will naturally exhibit characteristics associated with the additive manufacturing process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePlease expect:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Visible 3D printing layer lines\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Printing seams\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Possible support removal marks\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Minor surface irregularities\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Small differences in surface texture\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eTHE PRODUCT WILL NOT HAVE THE PERFECTLY SMOOTH APPEARANCE OF AN INJECTION-MOLDED FACTORY COMPONENT.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese characteristics are normal for FDM-manufactured accessories.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor customers who prefer a smoother cosmetic finish, we recommend:\u003c\/span\u003e\u003c\/p\u003e\n\u003col data-spread=\"false\" start=\"1\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eLight sanding of visible surfaces\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eApplication of suitable plastic primer\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAdditional surface preparation if required\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003ePainting in the desired finish\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eThese steps are intended to improve cosmetic appearance and are not automatically required for normal installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePLEASE EXAMINE ALL LISTING PHOTOS CAREFULLY BEFORE PURCHASING.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e📦 \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ePACKAGE CONTENTS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eEach order includes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• 1 × Rear seat cup holder and snack organizer for Volkswagen ID. Buzz\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe single organizer incorporates:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• 1 × Circular bottle compartment\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• 1 × Larger snack and accessory compartment\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Integrated seat-side mounting section\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eNOT INCLUDED:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Water bottles or beverage cans\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Snacks\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Personal accessories shown in photographs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnly the physical 3D-printed organizer is supplied.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e⚠️ \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eMANUFACTURING INFORMATION\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis accessory is independently manufactured using FDM 3D printing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe part is produced layer by layer, meaning that visible layer lines and minor cosmetic irregularities are normal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe organizer is supplied in its 3D-printed finish without additional cosmetic smoothing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMinor differences in printed surface appearance may occur between individual parts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e📜 \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eDESIGN ATTRIBUTION \u0026amp; LICENSE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRemixed design by user_385319078.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBased on an earlier ID. Buzz rear seat cup holder and snack holder design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLicense: Creative Commons Attribution-ShareAlike (CC BY-SA), as indicated on the source model page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOriginal design attribution and applicable license requirements remain in effect.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e━━━━━━━━━━━━━━━━━━\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e⚠️ \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eDISCLAIMER\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis product is an independently manufactured aftermarket automotive accessory.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is not an original Volkswagen component and is not manufactured, sponsored, approved, or endorsed by Volkswagen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVolkswagen and ID. Buzz names are used solely to identify intended vehicle compatibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe buyer is responsible for verifying fitment, proper installation, and safe use before operating the vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatibility may vary depending on seat configuration, interior trim, and previous vehicle modifications.\u003c\/span\u003e\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Left","offer_id":59090317934975,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"Right","offer_id":59090317967743,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"Left + Right","offer_id":59090318000511,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/Screenshot2026-11-04230401.png?v=1793826286","url":"https:\/\/www.carculturecyprus.com\/de\/products\/rear-seat-cup-holder-snack-organizer-for-vw-id-buzz-dual-bottle-holder","provider":"Car Culture Cyprus","version":"1.0","type":"link"}