{"title":"Speaker Mount","description":"","products":[{"product_id":"jeep-tj-5-25-in-dash-speaker-pods-left-right","title":"Jeep TJ 5.25” In-Dash Speaker Pods — Left \u0026 Right","description":"\u003cp\u003eJeep TJ 5.25” In-Dash Speaker Pods — Left \u0026amp; Right\u003c\/p\u003e\n\u003cp\u003eUpgrade the front sound stage of your Jeep TJ with this custom-designed set of 5.25-inch in-dash speaker pods. These pods replace the factory dash speaker mounts and give your Jeep significantly more air volume and depth for clearer mids, stronger output, and an overall richer sound experience.\u003c\/p\u003e\n\u003cp\u003eDesigned to maximize internal airspace while maintaining correct dash geometry, these pods accept standard 5.25\" speakers, including deeper aftermarket models used by many owners.\u003c\/p\u003e\n\u003cp\u003e✔ Fitment\u003c\/p\u003e\n\u003cp\u003eBased on user installs and confirmed feedback:\u003c\/p\u003e\n\u003cp\u003eDirect Fit:\u003c\/p\u003e\n\u003cp\u003e1997–2000 Jeep TJ (fits both sides with minor trimming depending on model year)\u003c\/p\u003e\n\u003cp\u003ePossible Fit With Modifications:\u003c\/p\u003e\n\u003cp\u003e2001–2002 Jeep TJ — reported interference due to an internal metal support. Some owners trimmed or removed part of the metal frame to install.\u003c\/p\u003e\n\u003cp\u003e1999 and earlier TJs — may require trimming around the headlight switch bracket.\u003c\/p\u003e\n\u003cp\u003eNot Confirmed \/ Not Recommended Without Fabrication:\u003c\/p\u003e\n\u003cp\u003eAny TJ with additional aftermarket dash reinforcements\u003c\/p\u003e\n\u003cp\u003eRHD models\u003c\/p\u003e\n\u003cp\u003e✔ Installation Notes\u003c\/p\u003e\n\u003cp\u003eThese pods install behind the factory dash grille and use the existing screw points.\u003cbr\u003eGeneral installation steps:\u003c\/p\u003e\n\u003cp\u003eRemove the dash grille and factory speaker mount.\u003c\/p\u003e\n\u003cp\u003eTest-fit the pod in the opening.\u003c\/p\u003e\n\u003cp\u003eTrim small areas of excess metal or plastic only if necessary (varies by year).\u003c\/p\u003e\n\u003cp\u003eMount your 5.25\" speaker inside the pod.\u003c\/p\u003e\n\u003cp\u003eUse CA glue or plastic-safe adhesive to join the front face plate.\u003c\/p\u003e\n\u003cp\u003eDrill a small wire pass-through hole if your speakers require it (many owners did this).\u003c\/p\u003e\n\u003cp\u003eInstall the assembled pod into the dash using the original screws.\u003c\/p\u003e\n\u003cp\u003eSome owners added poly-fill inside the pod for improved acoustic behavior (optional).\u003c\/p\u003e\n\u003cp\u003e✔ Benefits\u003c\/p\u003e\n\u003cp\u003eMuch larger internal airspace than the stock dash mount\u003c\/p\u003e\n\u003cp\u003eBetter midrange response thanks to deeper enclosure volume\u003c\/p\u003e\n\u003cp\u003eCompatible with many popular 5.25” speakers (Memphis PRX50C, NVX VSP525s, etc.)\u003c\/p\u003e\n\u003cp\u003eDesigned as separate left and right shells for easier installation\u003c\/p\u003e\n\u003cp\u003eStrong, durable design optimized to survive in hot Jeep interiors\u003c\/p\u003e\n\u003cp\u003e✔ What You Receive\u003c\/p\u003e\n\u003cp\u003eLeft speaker pod enclosure\u003c\/p\u003e\n\u003cp\u003eRight speaker pod enclosure\u003c\/p\u003e\n\u003cp\u003eLeft front face plate\u003c\/p\u003e\n\u003cp\u003eRight front face plate\u003c\/p\u003e\n\u003cp\u003e(All parts are 3D-printed, high-quality, and ready to install.)\u003c\/p\u003e\n\u003cp\u003e✔ Important Notes\u003c\/p\u003e\n\u003cp\u003eSome years require light trimming behind the dash (common feedback).\u003c\/p\u003e\n\u003cp\u003eWiring hole may need to be drilled depending on your speaker choice.\u003c\/p\u003e\n\u003cp\u003eSpeakers are not included.\u003c\/p\u003e\n\u003cp\u003eThis part is based on an original community design; credit to the contributors who developed and tested the early versions.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497862639999,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/477621b5-il_fullxfull.7456446746_prvx.jpg?v=1764533165"},{"product_id":"bmw-e28-front-speaker-cover-set-oem-style-3d-printed-replacement","title":"BMW E28 Front Speaker Covers (L+R) with spacers","description":"\u003cp\u003eRestore the clean factory look of your BMW E28 interior with this OEM-style front speaker cover set, designed as a direct replacement for original door speaker grilles.\u003c\/p\u003e\n\u003cp\u003eThis set includes both left and right covers and is built for a clean fit and finish. For more advanced setups, optional speaker adapters are available, allowing installation of modern aftermarket speakers while maintaining an OEM appearance.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for BMW E28 front door speakers\u003c\/p\u003e\n\u003cp\u003eIncludes left \u0026amp; right speaker covers (complete set)\u003c\/p\u003e\n\u003cp\u003eOEM-style slotted grille design\u003c\/p\u003e\n\u003cp\u003eDirect replacement for factory covers\u003c\/p\u003e\n\u003cp\u003eOptional speaker adapters for modern upgrades\u003c\/p\u003e\n\u003cp\u003eClean OEM+ solution for interior restoration\u003c\/p\u003e\n\u003cp\u003e📦 Available Options (Dropdown Selection)\u003c\/p\u003e\n\u003cp\u003eSelect your preferred configuration:\u003c\/p\u003e\n\u003cp\u003eCovers Only (L+R)\u003c\/p\u003e\n\u003cp\u003eCovers + Speaker Adapters\u003c\/p\u003e\n\u003cp\u003ePerfect for:\u003c\/p\u003e\n\u003cp\u003erestoring damaged or missing speaker covers\u003c\/p\u003e\n\u003cp\u003eupgrading speakers while keeping factory look\u003c\/p\u003e\n\u003cp\u003eOEM+ interior builds\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003c\/p\u003e\n\u003cp\u003eBMW E28 (1981–1988)\u003c\/p\u003e\n\u003cp\u003eInstallation method:\u003c\/p\u003e\n\u003cp\u003eDirect replacement of factory speaker covers\u003c\/p\u003e\n\u003cp\u003eNo modification required for standard installation\u003c\/p\u003e\n\u003cp\u003eAdapters (if selected) allow mounting of aftermarket speakers\u003c\/p\u003e\n\u003cp\u003e🔧 Installation Guide (Basic Overview)\u003c\/p\u003e\n\u003cp\u003eRemove original speaker covers\u003c\/p\u003e\n\u003cp\u003e(Optional) Install aftermarket speakers using adapters\u003c\/p\u003e\n\u003cp\u003eAlign covers with mounting points\u003c\/p\u003e\n\u003cp\u003eSecure in place using factory mounting method\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eAdapters are optional and only included if selected in variation.\u003c\/p\u003e\n\u003cp\u003eCompatibility with aftermarket speakers may vary depending on brand and size.\u003c\/p\u003e\n\u003cp\u003eTest fitting is strongly recommended before final installation.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for interior automotive use\u003c\/p\u003e\n\u003cp\u003eUV-stable – will not fade or warp over time\u003c\/p\u003e\n\u003cp\u003eStrong and durable construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional sanding or finishing may be required for best cosmetic results.\u003c\/p\u003e\n\u003cp\u003e🎨 Color \u0026amp; Finish\u003c\/p\u003e\n\u003cp\u003eColor: Black\u003c\/p\u003e\n\u003cp\u003eOther colors shown in images are for illustration purposes only\u003c\/p\u003e\n\u003cp\u003eCan be painted if desired\u003c\/p\u003e\n\u003cp\u003e📏 OEM Reference\u003c\/p\u003e\n\u003cp\u003eLeft: 51 33 1 926 989\u003cbr\u003eRight: 51 33 1 926 990\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003eDepends on selected option:\u003c\/p\u003e\n\u003cp\u003e2× Speaker Covers (Left + Right)\u003cbr\u003eOR\u003c\/p\u003e\n\u003cp\u003e2× Speaker Covers + Adapters\u003c\/p\u003e\n\u003cp\u003e(No speakers or mounting hardware included)\u003c\/p\u003e\n\u003cp\u003e🔩 Hardware Notice – Please Read\u003c\/p\u003e\n\u003cp\u003eThis product includes 3D printed parts only.\u003c\/p\u003e\n\u003cp\u003eNo screws, clips, speakers, or mounting hardware are included.\u003c\/p\u003e\n\u003cp\u003eAll hardware selection and installation is the responsibility of the buyer.\u003c\/p\u003e\n\u003cp\u003e🎯 Perfect For\u003c\/p\u003e\n\u003cp\u003eBMW E28 restorations\u003c\/p\u003e\n\u003cp\u003eOEM-style interior refresh\u003c\/p\u003e\n\u003cp\u003eAudio upgrades with factory look\u003c\/p\u003e\n\u003cp\u003eDaily drivers and show cars\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"With","offer_id":56497866506623,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true},{"title":"Without","offer_id":56497866539391,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/il_fullxfull.8319041569_huk4.webp?v=1793094927"},{"product_id":"mini-cooper-r50-r53-speaker-and-tweeter-adapter-6-5-tweeter-options","title":"Mini Cooper R50\/R53 Speaker and Tweeter Adapter – 6.5\" \u0026 Tweeter Options","description":"\u003cp\u003eMini Cooper R50\/R53 Speaker and Tweeter Adapter\u003c\/p\u003e\n\u003cp\u003eUpgrade your Mini Cooper’s sound system with the Tweeter Speaker Adapter, designed specifically for the R50 and R53 models (2001-2006). This adapter allows you to easily fit new tweeter speakers, ensuring a perfect fit for a high-quality audio upgrade.\u003c\/p\u003e\n\u003cp\u003eOption 1: Standard Tweeter Speaker Adapter\u003cbr\u003eThis adapter is perfect for upgrading your stock tweeter speakers. It’s designed to fit seamlessly into the R50\/R53 Mini Cooper and works well with a variety of tweeter speakers, including the Biltema speakers from Sweden that are used in this setup. The installation process is simple, and it enhances your driving experience with better sound quality.\u003c\/p\u003e\n\u003cp\u003eOption 2: 6.5\" Speaker Adapter\u003cbr\u003eIn addition to the tweeter speaker setup, this adapter also supports 6.5\" speakers, offering a more robust sound upgrade. This option works with speakers from Biltema (Sweden) and other compatible brands. If you’re looking for improved overall audio quality, this is the perfect choice for you.\u003c\/p\u003e\n\u003cp\u003eBoth options are designed to fit Mini Cooper R50\/R53 models (2001-2006), providing an easy and effective way to upgrade your car's sound system.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Speaker adapter Set","offer_id":56497867063679,"sku":null,"price":20.0,"currency_code":"EUR","in_stock":true},{"title":"Tweeter adapter set","offer_id":56497867096447,"sku":null,"price":15.0,"currency_code":"EUR","in_stock":true},{"title":"Complete Set","offer_id":56497867129215,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/73bcf28c-il_fullxfull.6844550982_l8w8.jpg?v=1765065039"},{"product_id":"dodge-challenger-speaker-adapter-set-2-6-5-inch-front-door-mounts-black","title":"Dodge Challenger Speaker Adapter Set (2) | 6.5 Inch Front Door Mounts | black","description":"\u003cp\u003eDodge Challenger Speaker Adapter Set (2) | 6.5 Inch Front Door Mounts | OEM Fit | ASA Plastic\u003c\/p\u003e\n\u003cp\u003eA pair of custom speaker adapters (set of 2) designed to fit 6.5” component speakers in the front doors of Dodge Challenger models.\u003cbr\u003eThese adapters let you upgrade your audio system to aftermarket speakers while keeping a clean, OEM-style fit — no cutting, drilling, or modification needed.\u003c\/p\u003e\n\u003cp\u003eEach adapter is printed from ASA plastic with 50% internal infill density, making it extremely rigid and durable.\u003cbr\u003eThis ensures no flexing, bending, or vibration, even with powerful speakers or high bass output — a truly reliable upgrade for your car’s sound system.\u003c\/p\u003e\n\u003cp\u003e✅ Fits Dodge Challenger (front doors)\u003cbr\u003e✅ Sold as a set of 2 (left + right)\u003cbr\u003e✅ Supports 6.5” component speakers\u003cbr\u003e✅ Uses factory screws — direct fit\u003cbr\u003e✅ Designed for 5mm speaker flange thickness\u003cbr\u003e✅ Printed with 50% infill for strength \u0026amp; stability\u003cbr\u003e✅ ASA plastic – heat and UV resistant\u003cbr\u003e✅ Matte black OEM-style finish\u003c\/p\u003e\n\u003cp\u003ePerfect for audio upgrades or replacements, ensuring strong, distortion-free support for your speakers.\u003c\/p\u003e\n\u003cp\u003e⚙️ Item Details\u003c\/p\u003e\n\u003cp\u003eFitment: Dodge Challenger (front doors)\u003c\/p\u003e\n\u003cp\u003eSpeaker size: 6.5” component\u003c\/p\u003e\n\u003cp\u003eMounting flange thickness: 5 mm\u003c\/p\u003e\n\u003cp\u003eInfill density: 50% (optimized for rigidity and strength)\u003c\/p\u003e\n\u003cp\u003eInstallation: Reuses factory screws \/ fasteners\u003c\/p\u003e\n\u003cp\u003eMaterial: ASA Plastic\u003c\/p\u003e\n\u003cp\u003eFinish: Matte black OEM texture\u003c\/p\u003e\n\u003cp\u003eSet includes: 2 adapters (left + right)\u003c\/p\u003e\n\u003cp\u003e⚙️ Why 50% Infill\u003c\/p\u003e\n\u003cp\u003eThe adapters are printed with 50% internal structure, which offers the perfect balance between low weight and high mechanical strength.\u003cbr\u003eThis prevents resonance, flex, or deformation, even when exposed to door vibration, bass, or heat.\u003c\/p\u003e\n\u003cp\u003e🧱 Materials \u003c\/p\u003e\n\u003cp\u003eASA Plastic, Heat Resistant Polymer\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497869816191,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/a4772f16-il_fullxfull.7437138205_jmfr.jpg?v=1765059863"},{"product_id":"w124-sedan-rear-door-speaker-enclosure-10cm-audio-upgrade-set-black","title":"W124 Sedan Rear Door Speaker Enclosure: 10cm Audio Upgrade Set black","description":"\u003cp\u003eW124 Sedan Rear Door Speaker Enclosure: 10cm Audio Upgrade Set\u003c\/p\u003e\n\u003cp\u003eMercedes-Benz W124 Rear Door Speaker Enclosure | Ashtray Replacement for 10cm Speakers | W124 Sedan Audio Upgrade\u003c\/p\u003e\n\u003cp\u003eComes as Set of left and right.\u003c\/p\u003e\n\u003cp\u003eUpgrade your Mercedes-Benz W124 Sedan audio system without cutting or damaging your door panels!\u003cbr\u003eThese custom rear door speaker enclosures replace the factory ashtrays and let you install 10cm speakers seamlessly.\u003c\/p\u003e\n\u003cp\u003eFitment: Mercedes-Benz W124 Sedan (1984–1995)\u003c\/p\u003e\n\u003cp\u003eLocation: Rear door cards (ashtray replacement)\u003c\/p\u003e\n\u003cp\u003eSpeaker Size: 10cm (tested with Kenwood KFC-S1066, may fit others)\u003c\/p\u003e\n\u003cp\u003eDesign: Two-piece clamping system with secure mounting tabs\u003c\/p\u003e\n\u003cp\u003eInstallation: Fully reversible – no cutting, no permanent mods\u003c\/p\u003e\n\u003cp\u003eIncludes: Left \u0026amp; right enclosures (pair)\u003c\/p\u003e\n\u003cp\u003eAssembly Instructions (short):\u003c\/p\u003e\n\u003cp\u003ePrepare your 10cm speakers (snap tabs if needed).\u003c\/p\u003e\n\u003cp\u003ePlace between the two printed halves, align straight, screw together.\u003c\/p\u003e\n\u003cp\u003eRemove rear ashtray and housing from door card.\u003c\/p\u003e\n\u003cp\u003eWire the speaker, insert enclosure at ~15° angle, snap into place with clips.\u003c\/p\u003e\n\u003cp\u003eDone – enjoy your new soundscape in the W124!\u003c\/p\u003e\n\u003cp\u003ePerfect for enthusiasts who want better audio in their W124 while keeping the OEM look intact.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497874895231,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/ca29e9c8-il_fullxfull.7212072896_misr.jpg?v=1764533217"},{"product_id":"jeep-yj-roll-bar-speaker-boxes-4-ported-clamp-on-mount-set-of-2","title":"Jeep YJ Roll Bar Speaker Boxes — 4” Ported Clamp-On Mount (Set of 2)","description":"\u003cp\u003eJeep YJ Roll Bar 4\" Ported Speaker Boxes – Clamp-On Mount – Set of 2 (Left \u0026amp; Right)\u003c\/p\u003e\n\u003cp\u003eUpgrade your sound system with this custom-designed pair of ported speaker boxes for the Jeep YJ (1987–1995). These enclosures are engineered to clamp securely onto the factory roll bar (58mm diameter), offering a clean and OEM-style installation with improved acoustics.\u003c\/p\u003e\n\u003cp\u003eEach box is optimized for a 4\" speaker and includes a wire pass-through in the rear for simple routing. The clamp section is built for 4mm nuts and screws—press-fit ready and easily tightened using a washer and screw.\u003cbr\u003eThe ported design enhances sound clarity and bass response even in open cabin setups.\u003c\/p\u003e\n\u003cp\u003e🔧 Key Features:\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Jeep YJ roll bars (58mm)\u003c\/p\u003e\n\u003cp\u003eCompatible with standard 4\" speakers\u003c\/p\u003e\n\u003cp\u003eRear wire routing hole\u003c\/p\u003e\n\u003cp\u003ePorted design for improved sound\u003c\/p\u003e\n\u003cp\u003eMade for 4mm nut\/screw hardware (not included)\u003c\/p\u003e\n\u003cp\u003eEasy clamp-on installation\u003c\/p\u003e\n\u003cp\u003eComes as set of 2 (Left + Right)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497874927999,"sku":null,"price":100.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/9ec33f88-il_fullxfull.6959597676_iu5g.jpg?v=1764533217"},{"product_id":"jeep-wrangler-tj-speaker-adapter-ring-5-25-6-5","title":"Speaker Adapter Rings for Jeep Wrangler TJ 1997–2006 – 5.25 to 6.5 Inch Pair","description":"\u003ch1 data-start=\"336\" data-end=\"389\"\u003eSpeaker Adapter Rings for Jeep Wrangler TJ 1997–2006 – 5.25 to 6.5 Inch Pair\u003cbr\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eInstall compatible 6.5-inch aftermarket speakers in the factory 5.25-inch speaker locations of your Jeep Wrangler TJ. These adapter rings fit the factory TJ soundbar and speaker pods, providing a mounting surface for larger speakers and additional clearance for deeper speaker baskets.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSold as a pair. Each order includes two adapter rings for two speaker locations.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDesigned for Jeep Wrangler TJ 1997–2006\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAdapts factory 5.25-inch locations to compatible 6.5-inch speakers\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFits factory TJ soundbar and speaker pods\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eInstallation without cutting the enclosure on matching configurations\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAdds clearance for deeper aftermarket speakers\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMultiple mounting-hole orientations\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eManufactured in ASA plastic for heat and UV resistance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDimensions\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eOuter diameter — approximately 173mm \/ 6.81 inches\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eThickness — approximately 18mm \/ 0.71 inches\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eIntended speaker size — nominal 6.5 inches\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eVehicle compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned for \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eJeep Wrangler TJ 1997–2006\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e with factory soundbar or speaker pod configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCertain Jeep Wrangler YJ and custom speaker pods may also accommodate these adapters, depending on their mounting arrangement. Compare the enclosure opening, fixing positions, and available space before ordering for those applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSpeaker compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSuitable for compatible 6.5-inch aftermarket speakers. Check the speaker’s basket diameter, mounting-hole pattern, overall depth, and grille clearance before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe rings provide additional spacing at the mounting surface. Available clearance behind the speaker still depends on the enclosure and the selected speaker.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eInstallation\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePosition each ring at the original speaker location and align the appropriate mounting holes. Test-fit the speaker before securing the assembly, checking clearance around the basket, magnet, terminals, and grille.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSelect mounting hardware suitable for the speaker and enclosure, and secure both the adapter and speaker evenly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eMaterial and surface finish\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProfessionally 3D printed in \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eASA plastic\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, suitable for automotive applications exposed to heat and sunlight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMinor layer lines and small surface imperfections may be visible as part of the printing process. Sanding and painting can be carried out if a smoother cosmetic finish is desired.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePackage contents\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2 × speaker adapter rings, converting compatible 5.25-inch mounting locations to 6.5-inch speakers.\u003c\/span\u003e\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56529999167871,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/jeepsp1.png?v=1765101444"},{"product_id":"bmw-e46-coupe-6-5-rear-shelf-speaker-adapters-set-of-2","title":"BMW E46 Coupe 6.5\" Rear Shelf Speaker Adapters — Set of 2","description":"\u003cp\u003eBMW E46 Coupe 6.5\" Rear Shelf Speaker Adapters — Set of 2\u003c\/p\u003e\n\u003cp\u003eUpgrade the rear audio system of your BMW E46 Coupe with this set of 6.5-inch rear shelf speaker adapters.\u003cbr\u003eDesigned for enthusiasts who want to install larger speakers while keeping factory mounting points intact.\u003c\/p\u003e\n\u003cp\u003eThese adapters position your new 6.5\" speakers securely on the OEM rear deck without cutting or modifying the car. Each pair is precision 3D printed for durability, consistent fit, and long-term use.\u003c\/p\u003e\n\u003cp\u003eFitment\u003c\/p\u003e\n\u003cp\u003eThese adapters fit:\u003c\/p\u003e\n\u003cp\u003eBMW E46 Coupe (all years)\u003c\/p\u003e\n\u003cp\u003eThese do NOT fit:\u003c\/p\u003e\n\u003cp\u003eE46 Convertible \/ Cabrio\u003c\/p\u003e\n\u003cp\u003eE46 Sedan\u003c\/p\u003e\n\u003cp\u003e(The Coupe has a different rear shelf and mounting pattern. Convertible models do not have a standard rear deck.)\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eSet of 2 adapters (left + right)\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for 6.5-inch speakers\u003c\/p\u003e\n\u003cp\u003eUses OEM mounting studs for hassle-free installation\u003c\/p\u003e\n\u003cp\u003eNo drilling, no cutting required\u003c\/p\u003e\n\u003cp\u003eStrong and lightweight 3D printed construction\u003c\/p\u003e\n\u003cp\u003eClean OEM-style appearance once installed\u003c\/p\u003e\n\u003cp\u003eGreat for audio upgrades and improved sound quality\u003c\/p\u003e\n\u003cp\u003eMaterial\u003c\/p\u003e\n\u003cp\u003ePrinted in high-quality ASA, ideal for automotive use:\u003c\/p\u003e\n\u003cp\u003eUV resistant\u003c\/p\u003e\n\u003cp\u003eHeat resistant\u003c\/p\u003e\n\u003cp\u003eDurable and impact-resistant\u003c\/p\u003e\n\u003cp\u003e3D Print Notes\u003c\/p\u003e\n\u003cp\u003eThese parts are 3D printed, so small layer lines or minor support marks may be visible.\u003cbr\u003eIf you want a perfectly smooth surface, light sanding or painting can be applied.\u003c\/p\u003e\n\u003cp\u003eIncluded\u003c\/p\u003e\n\u003cp\u003e2 × Speaker adapters (left + right)\u003c\/p\u003e\n\u003cp\u003eSpeakers and mounting hardware not included.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56530337137023,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/e46c3.png?v=1765107653"},{"product_id":"subaru-front-door-speaker-brackets-for-outback-legacy-baja-6-5-speaker-adapters","title":"Subaru Front Door Speaker Brackets for Outback Legacy Baja | 6.5” Speaker Adapters","description":"\u003cp\u003eFront Door Speaker Brackets for Subaru Outback Legacy Baja | 6.5” Speaker Adapters\u003c\/p\u003e\n\u003cp\u003eUpgrade your Subaru’s front door audio system with these precision-fit speaker brackets, designed to replace the weak factory mounts and allow installation of standard 6.5” aftermarket speakers.\u003c\/p\u003e\n\u003cp\u003ePerfect fitment confirmed on multiple Subaru models, including:\u003c\/p\u003e\n\u003cp\u003eSubaru Outback 2010–2014\u003c\/p\u003e\n\u003cp\u003eSubaru Legacy 2010–2014\u003c\/p\u003e\n\u003cp\u003eSubaru Baja 2003–2006 (customer-confirmed)\u003c\/p\u003e\n\u003cp\u003e*May fit additional Subaru platforms with similar door layout — compare with photos.\u003c\/p\u003e\n\u003cp\u003e⭐ Why these brackets are better\u003c\/p\u003e\n\u003cp\u003eThese mounts are printed in automotive-grade ASA.\u003c\/p\u003e\n\u003cp\u003e✔ Heat-resistant — no warping inside the hot door cavity\u003cbr\u003e✔ Moisture-proof — unaffected by condensation\u003cbr\u003e✔ OEM-like rigidity — keeps speakers firmly in place\u003cbr\u003e✔ Improves sound quality — better seal = better bass\u003cbr\u003e✔ Pre-drilled holes match factory layout for easy installation\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× front door speaker brackets (Left + Right)\u003c\/p\u003e\n\u003cp\u003eMounting hole pattern pre-drilled\u003c\/p\u003e\n\u003cp\u003eReady for installation with your factory screws or aftermarket hardware\u003c\/p\u003e\n\u003cp\u003e(Hardware not included — reuse factory screws or choose your preferred fasteners.)\u003c\/p\u003e\n\u003cp\u003e🔧 Installation Notes\u003c\/p\u003e\n\u003cp\u003eTest-fit the bracket before installing the speaker.\u003c\/p\u003e\n\u003cp\u003eWorks with most 6.5” (165 mm) speakers.\u003c\/p\u003e\n\u003cp\u003eSome Subaru models require minor trimming of the moisture barrier.\u003c\/p\u003e\n\u003cp\u003e🧵 Material\u003c\/p\u003e\n\u003cp\u003ePrinted exclusively in ASA for maximum durability inside the car door (heat, humidity, vibration).\u003c\/p\u003e\n\u003cp\u003e❗ Fitment Disclaimer\u003c\/p\u003e\n\u003cp\u003eDifferent Subaru models may have small variations in door design.\u003cbr\u003ePlease compare your door layout with the reference photos to ensure compatibility.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56539878850943,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/baja3.png?v=1765238020"},{"product_id":"subaru-impreza-front-speaker-spacers-20mm-speaker-adapters","title":"Subaru Impreza Front Speaker Spacers — 20mm Speaker Adapters","description":"\u003cp\u003eSubaru Impreza Front Speaker Spacers — 20mm Speaker Adapters\u003c\/p\u003e\n\u003cp\u003eUpgrade your Subaru Impreza sound system with these precision-made 20mm front speaker spacers, designed to provide the clearance needed for most aftermarket 6–6.75\" speakers.\u003cbr\u003eA perfect solution for replacing swollen factory wooden spacers and preventing the speaker surround from contacting the door panel.\u003c\/p\u003e\n\u003cp\u003eCompatible Models:\u003cbr\u003e• Subaru Impreza \/ WRX \/ STI (2001–2007 GD\/GG “Hawkeye” and “Blobeye”)\u003cbr\u003e• Also fits many aftermarket speakers requiring extra depth or window-clearance\u003c\/p\u003e\n\u003cp\u003eKey Features:\u003cbr\u003e• Raises speakers by 20mm for proper window clearance\u003cbr\u003e• Fits most 6–6.75\" round aftermarket speakers\u003cbr\u003e• Bolt-on installation using factory door locations\u003cbr\u003e• Made from ASA for durability, heat resistance, and long-term stability\u003cbr\u003e• Sold as a pair (left + right)\u003c\/p\u003e\n\u003cp\u003eInstallation Notes:\u003cbr\u003e• Reuse factory hardware or upgrade to your preferred screws\u003cbr\u003e• Always verify window clearance after installation\u003cbr\u003e• Designed as a direct replacement for the stock spacer height\u003c\/p\u003e\n\u003cp\u003eIncluded:\u003cbr\u003e✓ Left \u0026amp; right 20mm speaker spacers\u003cbr\u003e✓ Ready to install\u003c\/p\u003e\n\u003cp\u003ePerfect for restorations, audio upgrades, and ensuring a clean, professional fit without rattles or door interference.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56539970077055,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/imp1.png?v=1765239616"},{"product_id":"subaru-forester-sg-2002-2008-speaker-adapters-front-rear-full-set","title":"Subaru Forester SG (2002–2008) Speaker Adapters Front 6.5 \/ Rear 5.25 \/ Full Set","description":"\u003cp\u003e🔧 Subaru Forester SG (2002–2008) Speaker Adapters — Front \/ Rear \/ Full Set — ASA\u003c\/p\u003e\n\u003cp\u003ePerfect-fit speaker adapters for Subaru Forester SG (2002–2008).\u003cbr\u003eDesigned to replace swollen MDF rings and provide a rigid, moisture-proof, heat-resistant mount for aftermarket speakers.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cstrong\u003e\u003cspan\u003eSPEAKER COMPATIBILITY – IMPORTANT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFront Speaker Adapters:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eIntended for compatible 6.5-inch aftermarket speakers.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eApproximate internal mounting opening: 145.1 mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAdapter thickness: 12 mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRear Speaker Adapters:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eIntended for compatible 5.25-inch aftermarket speakers.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eApproximate internal mounting opening: 118.8 mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAdapter thickness: 7 mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eIMPORTANT:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e The front and rear adapters have different mounting dimensions. The rear adapters are not designed for the same 6.5-inch speaker mounting configuration as the front adapters.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease verify your speaker's required mounting cutout, basket dimensions and screw-hole positions before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAll parts are printed from automotive-grade ASA, ideal for hot, humid car-door environments.\u003c\/p\u003e\n\u003cp\u003e📦 Available Options (Choose 1 of 3):\u003cbr\u003e1️⃣ Front Pair (Left + Right)\u003c\/p\u003e\n\u003cp\u003e• Thickness: 12 mm – ensures window-glass clearance.\u003c\/p\u003e\n\u003cp\u003e2️⃣ Rear Pair (Left + Right)\u003c\/p\u003e\n\u003cp\u003e• Thickness: 7 mm – fits behind the rear door card without interference.\u003c\/p\u003e\n\u003cp\u003e3️⃣ Full Set (Front + Rear)\u003c\/p\u003e\n\u003cp\u003e• Full upgrade for all door speakers.\u003c\/p\u003e\n\u003cp\u003e⭐ Product Details\u003c\/p\u003e\n\u003cp\u003eFitment: Subaru Forester SG 2002–2008\u003c\/p\u003e\n\u003cp\u003eSpeaker compatibility: Most 6\"–6.5\" \/ 6.75\" aftermarket speakers\u003c\/p\u003e\n\u003cp\u003eMaterial: Premium ASA (heat-, UV- and moisture-resistant)\u003c\/p\u003e\n\u003cp\u003eDesign: OEM mounting geometry, perfect alignment\u003c\/p\u003e\n\u003cp\u003eAbout Insert Holes\u003c\/p\u003e\n\u003cp\u003eThe models include holes sized for M4 heat-set inserts, as shown in reference photos.\u003cbr\u003eWe do not provide inserts or perform installation.\u003cbr\u003eBuyers may install them themselves if desired, but this is optional and not required.\u003c\/p\u003e\n\u003cp\u003e🔥 Why ASA, not MDF\/PLA?\u003c\/p\u003e\n\u003cp\u003eASA withstands:\u003c\/p\u003e\n\u003cp\u003eDoor heat\u003c\/p\u003e\n\u003cp\u003eHigh humidity\u003c\/p\u003e\n\u003cp\u003eLong-term vibration\u003c\/p\u003e\n\u003cp\u003eSun exposure\u003c\/p\u003e\n\u003cp\u003eMDF swells.\u003cbr\u003ePLA warps.\u003cbr\u003eASA stays strong.\u003c\/p\u003e\n\u003cp\u003e📌 Installation Notes\u003c\/p\u003e\n\u003cp\u003eDirect bolt-on fit\u003c\/p\u003e\n\u003cp\u003eUse your preferred screws\u003c\/p\u003e\n\u003cp\u003eCheck speaker depth depending on brand\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Front Set","offer_id":56540083028351,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"Rear Set","offer_id":56540083061119,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"Front + Rear Set","offer_id":56540083093887,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/for8.png?v=1765241558"},{"product_id":"subaru-forester-1997-2002-front-door-speaker-adapter-165mm-speaker-spacer","title":"Subaru Forester 1997-2002 Front Door Speaker Adapter | 165mm Speaker Spacer","description":"\u003cp\u003eSubaru Forester 1997-2002 Front Door Speaker Adapter | 165mm Speaker Spacer | SG Forester Speaker Bracket | \u003c\/p\u003e\n\u003cp\u003eUpgrade your Subaru Forester’s audio system with a durable, perfectly-fitting front door speaker adapter designed for 165 mm aftermarket speakers (Hertz, Pioneer, Alpine, JBL, etc.).\u003cbr\u003eFits Subaru Forester SG early models (1997–2002).\u003c\/p\u003e\n\u003cp\u003eThis adapter mounts directly to the factory screw points, and the speaker attaches using the original screws + one extra screw hole (adapter has 4 mounting points).\u003cbr\u003eBuilt-in wire channels allow clean routing of the wiring harness.\u003cbr\u003eThe depth of the adapter ensures the speaker does not touch the window glass when fully lowered.\u003c\/p\u003e\n\u003cp\u003eWhy ASA? (CarCultureCyprus signature material)\u003c\/p\u003e\n\u003cp\u003ePrinted exclusively in ASA — a UV-, heat- and moisture-resistant automotive-grade material.\u003cbr\u003eUnlike ABS or PLA, ASA stays stable inside the door area and won’t deform from heat, humidity, or vibration.\u003cbr\u003ePerfect for long-term reliability on real cars.\u003c\/p\u003e\n\u003cp\u003eInstallation Notes\u003c\/p\u003e\n\u003cp\u003eUses factory door screw holes\u003c\/p\u003e\n\u003cp\u003eAdd thin insulation foam between adapter and panel (optional, reduces vibration)\u003c\/p\u003e\n\u003cp\u003eSpeaker attaches with factory screws + 1 extra (adapter includes location)\u003c\/p\u003e\n\u003cp\u003eWire grooves make installation easier\u003c\/p\u003e\n\u003cp\u003eWorks with speakers up to 165 mm diameter\u003c\/p\u003e\n\u003cp\u003eWhat’s Included\u003c\/p\u003e\n\u003cp\u003e✔ 1× Front Door Speaker Adapter (Left)\u003cbr\u003e✔ 1× Front Door Speaker Adapter (Right)\u003c\/p\u003e\n\u003cp\u003eMaterial: ASA Black — automotive-grade\u003cbr\u003eHardware not included (use original screws)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56544578142591,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/forik1.png?v=1765326370"},{"product_id":"subaru-outback-bh-1999-2003-front-rear-speaker-adapters-aftermarket-speaker-mounts","title":"Subaru Outback BH 1999–2003 Front \u0026 Rear Speaker Adapters | Aftermarket Speaker Mounts","description":"\u003cp\u003eSubaru Outback BH 1999–2003 Front \u0026amp; Rear Speaker Adapters | Aftermarket Speaker Mounts\u003c\/p\u003e\n\u003cp\u003eUpgrade the factory audio in your Subaru Outback BH (1999–2003) with these durable aftermarket front and rear speaker mounting adapters.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the BH platform, each adapter provides the correct spacing, alignment, and screw geometry to fit modern aftermarket speakers without modification to the door panel.\u003c\/p\u003e\n\u003cp\u003e💎 Product Options (Choose Your Set)\u003c\/p\u003e\n\u003cp\u003eYou can select one of three purchase options:\u003c\/p\u003e\n\u003cp\u003e1️⃣ Front Pair (Left + Right)\u003c\/p\u003e\n\u003cp\u003e— Correct depth for window clearance\u003cbr\u003e— Matches the 3-point factory mounting pattern\u003c\/p\u003e\n\u003cp\u003e2️⃣ Rear Pair (Left + Right)\u003c\/p\u003e\n\u003cp\u003e— Reduced thickness to perfectly clear the inner door skin\u003cbr\u003e— Fits OEM door cards without interference\u003c\/p\u003e\n\u003cp\u003e3️⃣ Full Set (Front + Rear, 4 pcs)\u003c\/p\u003e\n\u003cp\u003e— Complete upgrade kit for all four doors\u003c\/p\u003e\n\u003cp\u003e💎 Material — ASA for Automotive Use\u003c\/p\u003e\n\u003cp\u003ePrinted exclusively in ASA, not PLA or PETG.\u003cbr\u003eWhy ASA?\u003c\/p\u003e\n\u003cp\u003eHeat-resistant (no warping inside hot doors)\u003c\/p\u003e\n\u003cp\u003eUV-stable\u003c\/p\u003e\n\u003cp\u003eStrong impact resistance\u003c\/p\u003e\n\u003cp\u003eIdeal for long-term automotive use\u003c\/p\u003e\n\u003cp\u003eThis is a premium, long-lasting solution — not a temporary spacer.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation Notes\u003c\/p\u003e\n\u003cp\u003eUses factory mounting points\u003c\/p\u003e\n\u003cp\u003eDesigned for most aftermarket 6.5\" speakers\u003c\/p\u003e\n\u003cp\u003eYou may add thin foam tape on the contact surface to eliminate vibrations (optional)\u003c\/p\u003e\n\u003cp\u003eScrews not included (reuse OEM or your speaker hardware)\u003c\/p\u003e\n\u003cp\u003e📦 What's Included\u003c\/p\u003e\n\u003cp\u003eDepending on the selected variant:\u003c\/p\u003e\n\u003cp\u003eFront Pair, or\u003c\/p\u003e\n\u003cp\u003eRear Pair, or\u003c\/p\u003e\n\u003cp\u003eFull Set (4 pcs)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Front Set","offer_id":56546165981567,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true},{"title":"Rear Set","offer_id":56546166014335,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true},{"title":"Front + Rear Set","offer_id":56546166047103,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/subbh3.png?v=1765362320"},{"product_id":"dashboard-speaker-adapter-set-for-toyota-gt86-scion-fr-s-subaru-brz-rain-shield-tweeter-chamber","title":"Dashboard Speaker Adapter set for Toyota GT86 \/ Scion FR-S \/ Subaru BRZ (Rain-Shield + Tweeter Chamber)","description":"\u003cp\u003eDashboard Speaker Adapter set for Toyota GT86 \/ Scion FR-S \/ Subaru BRZ (Rain-Shield + Tweeter Chamber)\u003c\/p\u003e\n\u003cp\u003eUpgrade your 86\/FR-S\/BRZ audio system with this redesigned dashboard speaker adapter.\u003cbr\u003eThis version includes a built-in rain shield and a 30ml tweeter coupling chamber, giving much better speaker protection and improved acoustic performance compared to OEM mounts.\u003c\/p\u003e\n\u003cp\u003eCompatible with:\u003cbr\u003eToyota GT86 • Scion FR-S • Subaru BRZ (all first-gen years)\u003c\/p\u003e\n\u003cp\u003eDesigned for Andrian Audio A80neo + A25\/A25T\/A25G tweeters, but works with many standard-size speakers.\u003c\/p\u003e\n\u003cp\u003e✔ Tested fit\u003c\/p\u003e\n\u003cp\u003eFully printed and test-fitted — works properly.\u003cbr\u003eOEM tweeter mount may require a slight trim for best fit.\u003c\/p\u003e\n\u003cp\u003e✔ Material\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA for heat resistance and long-term durability.\u003cbr\u003ePlease note: 3D-printed parts naturally have minor surface texture or small layer lines.\u003c\/p\u003e\n\u003cp\u003e✔ Installation notes\u003c\/p\u003e\n\u003cp\u003eDrill tweeter cable holes if needed\u003c\/p\u003e\n\u003cp\u003eSlight trim of OEM tweeter mount (very small)\u003c\/p\u003e\n\u003cp\u003eUse 3 plastic rivets for fastening\u003c\/p\u003e\n\u003cp\u003eSeal air passages using butyl tape for best midrange response\u003c\/p\u003e\n\u003cp\u003eClose gaps to create a proper sealed enclosure for midrange speakers\u003c\/p\u003e\n\u003cp\u003eA clean, durable solution for anyone upgrading audio in their GT86 \/ FR-S \/ BRZ.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56561908416895,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/spek2.png?v=1765640598"},{"product_id":"rear-speaker-adapters-for-subaru-crosstrek-fits-6-5-speakers","title":"Rear Speaker Adapters for Subaru Crosstrek – Fits 6.5” Speakers","description":"\u003cp\u003eRear Speaker Adapters for Subaru Crosstrek – Fits 6.5” Speakers\u003c\/p\u003e\n\u003cp\u003eUpgrade the rear audio in your Subaru Crosstrek with these custom speaker adapters.\u003cbr\u003eDesigned for 2017 Subaru Crosstrek, these mounts bolt directly into the factory rear speaker location and allow installation of standard 6.5\" aftermarket speakers.\u003c\/p\u003e\n\u003cp\u003ePerfect if you're replacing weak factory speakers or installing a full audio upgrade.\u003c\/p\u003e\n\u003cp\u003e✔ Fitment\u003c\/p\u003e\n\u003cp\u003e• Subaru Crosstrek — 2013–2017 (GP\/GP7)\u003cbr\u003e(Confirmed fit on 2017. Other GP models use the same rear mount pattern.)\u003c\/p\u003e\n\u003cp\u003e✔ Material\u003c\/p\u003e\n\u003cp\u003ePrinted in durable ASA – heat-resistant and made for automotive interiors.\u003cbr\u003eSmall surface texture or layer lines are normal due to the 3D-printing process.\u003c\/p\u003e\n\u003cp\u003e✔ What’s included\u003c\/p\u003e\n\u003cp\u003e• Left + Right speaker adapters\u003cbr\u003e• Mounting holes\u003cbr\u003e• Ready to install with your hardware\u003c\/p\u003e\n\u003cp\u003eClean, strong, and designed specifically for aftermarket audio setups.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56562031821183,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/cross4.png?v=1765643571"},{"product_id":"2022-subaru-wrx-speaker-mounts-front-rear-tweeter-adapters-6-5-speaker-upgrade-brackets","title":"2022 Subaru WRX Speaker Mounts – Front, Rear \u0026 Tweeter Adapters | 6.5\" Speaker Upgrade Brackets","description":"\u003cp\u003e2022 Subaru WRX Speaker Mounts – Front, Rear \u0026amp; Tweeter Adapters | 6.5\" Speaker Upgrade Brackets\u003c\/p\u003e\n\u003cp\u003eUpgrade the audio system in your 2022 Subaru WRX with precision-fit front, rear and tweeter speaker mounts.\u003cbr\u003eThese brackets allow you to install aftermarket 6.5\" speakers with correct alignment, spacing and factory-location bolt pattern.\u003c\/p\u003e\n\u003cp\u003ePerfect for replacing weak OEM speakers and achieving a cleaner, stronger mid-bass response.\u003c\/p\u003e\n\u003cp\u003eAvailable options:\u003c\/p\u003e\n\u003cp\u003eFront + Tweeters\u003c\/p\u003e\n\u003cp\u003eRear\u003c\/p\u003e\n\u003cp\u003eFull Set (Front + Rear + Tweeters)\u003c\/p\u003e\n\u003cp\u003eEach mount is designed based on OEM geometry for a secure, rattle-free fit. Depth is optimized to avoid window interference and ensure proper cone clearance.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cp\u003eCustom designed for 2022 Subaru WRX\u003c\/p\u003e\n\u003cp\u003eSupports most 6.5\" aftermarket speakers\u003c\/p\u003e\n\u003cp\u003eProper stand-off height and alignment\u003c\/p\u003e\n\u003cp\u003eOEM-style bolt pattern\u003c\/p\u003e\n\u003cp\u003eStrong, automotive-grade ASA for heat resistance\u003c\/p\u003e\n\u003cp\u003eClean, rigid structure for improved audio performance\u003c\/p\u003e\n\u003cp\u003eMaterial\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA for durability and heat resistance.\u003cbr\u003eMinor surface texture from 3D printing is normal.\u003c\/p\u003e\n\u003cp\u003eInstallation Notes\u003c\/p\u003e\n\u003cp\u003eFront mounts may require M4 bolt hardware depending on speaker brand\u003c\/p\u003e\n\u003cp\u003eFoam or gasket tape recommended for airtight seal\u003c\/p\u003e\n\u003cp\u003eAll parts arrive ready to install\u003c\/p\u003e\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\u003cp\u003eDepending on the selected option:\u003c\/p\u003e\n\u003cp\u003eFront Left + Front Right speaker mounts\u003c\/p\u003e\n\u003cp\u003eRear Left + Rear Right speaker mounts\u003c\/p\u003e\n\u003cp\u003eTweeter mounts\u003c\/p\u003e\n\u003cp\u003eOr complete kit (Front + Rear + Tweeters)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Front + Tweeters","offer_id":56562059280767,"sku":null,"price":120.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":56562059313535,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true},{"title":"Front + Rear + Twts","offer_id":56562059346303,"sku":null,"price":150.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/wrx2.png?v=1765645467"},{"product_id":"honda-civic-ek-front-speaker-adapters","title":"Honda Civic (EK) Front Speaker Adapters","description":"\u003cp\u003eHonda Civic Front Speaker Adapter Set\u003c\/p\u003e\n\u003cp\u003eUpgrade the front speakers on your 1996–2000 Honda Civic (EK) with this precision-made adapter set. Designed specifically to fit the factory mounting points, these adapters allow you to install modern aftermarket speakers without cutting or modifying your OEM panels.\u003c\/p\u003e\n\u003cp\u003ePerfect fit ensured by real-world testing. Based on user feedback, only minimal trimming on the speaker cover may be needed depending on speaker brand.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003c\/p\u003e\n\u003cp\u003eFront Left Adapter\u003c\/p\u003e\n\u003cp\u003eFront Right Adapter\u003c\/p\u003e\n\u003cp\u003eFits OEM positions on:\u003c\/p\u003e\n\u003cp\u003eHonda Civic 1996, 1997, 1998, 1999, 2000 (EK)\u003c\/p\u003e\n\u003cp\u003eCompatible with many 6.5\" aftermarket speakers (JBL Stage 602E tested)\u003c\/p\u003e\n\u003cp\u003e⚙️ Material \u0026amp; Quality\u003c\/p\u003e\n\u003cp\u003eAll parts are 3D-printed in high-quality ASA, an automotive-grade material resistant to heat, UV, and vibration.\u003c\/p\u003e\n\u003cp\u003e💬 Important:\u003cbr\u003e3D-printed parts naturally have minor layer lines and small cosmetic imperfections. They do not affect fit or durability.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eUses factory screw locations\u003c\/p\u003e\n\u003cp\u003eSome speakers may require slight trimming on the panel depending on rubber surround size\u003c\/p\u003e\n\u003cp\u003eDesigned to maintain correct speaker depth and clearance\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56562177409407,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/civic3.png?v=1765651145"},{"product_id":"mercedes-w639-vito-viano-speaker-adapter-plate-set-130mm-door-speaker-mount","title":"Mercedes W639 Vito Viano Speaker Adapter Plate Set | 130mm Door Speaker Mount","description":"\u003cp\u003eMercedes-Benz W639 Speaker Adapter Plate Set (Vito \/ Viano)\u003c\/p\u003e\n\u003cp\u003eThis speaker adapter plate is designed to install 130 mm (5.25”) speakers into the front doors of Mercedes-Benz W639 Vito \/ Viano, allowing you to upgrade the factory audio system while using the original mounting location.\u003c\/p\u003e\n\u003cp\u003eA practical solution for fitting aftermarket speakers without cutting the door panel.\u003c\/p\u003e\n\u003cp\u003e🚐 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Mercedes-Benz Vito W639\u003cbr\u003e✔ Mercedes-Benz Viano W639\u003cbr\u003e✔ May also fit some Mercedes Sprinter models (check measurements before ordering)\u003c\/p\u003e\n\u003cp\u003e🔊 Speaker Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Designed for 130 mm (5.25”) speakers\u003cbr\u003e✔ Tested with speakers like Hertz Uno K 130\u003cbr\u003e✖ Not suitable for other sizes\u003c\/p\u003e\n\u003cp\u003e🛠 Installation Notes (Important)\u003c\/p\u003e\n\u003cp\u003eDesigned to use the factory door mounting location\u003c\/p\u003e\n\u003cp\u003eDepending on speaker brand and vehicle tolerances, minor hole adjustment may be required\u003c\/p\u003e\n\u003cp\u003eSome users achieved perfect fit by lightly enlarging holes with a 10 mm drill\u003c\/p\u003e\n\u003cp\u003eThis is common when upgrading speakers on older vehicles and is not a defect\u003c\/p\u003e\n\u003cp\u003e🧱 Manufacturing \u0026amp; Finish Notice\u003c\/p\u003e\n\u003cp\u003eThis item is professionally 3D printed using automotive-grade materials.\u003c\/p\u003e\n\u003cp\u003eDue to the nature of 3D printing, minor cosmetic artifacts or layer lines may be visible, especially on close inspection.\u003cbr\u003eEvery adapter is produced with high-quality settings and careful orientation to minimize these effects wherever possible.\u003c\/p\u003e\n\u003cp\u003eFor customers seeking a perfect show-car finish, light sanding and painting can be done easily, although this is not required for normal installation and use.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003c\/p\u003e\n\u003cp\u003e✔ 2 × Speaker adapter plate\u003cbr\u003e✖ Speakers and screws not included\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket accessory, not affiliated with Mercedes-Benz.\u003cbr\u003eMinor adjustments may be required depending on speaker brand, production tolerances, and vehicle age.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56575179522431,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/vito1.png?v=1765854486"},{"product_id":"mercedes-sprinter-6-5-inch-speaker-adapter-set-door-speaker-mount-rings","title":"Mercedes Sprinter 6.5 Inch Speaker Adapter Set | Door Speaker Mount Rings","description":"\u003cp\u003eMercedes Sprinter 6.5” Speaker Adapter Rings (Set of 2)\u003c\/p\u003e\n\u003cp\u003eThis speaker adapter set allows you to install 6.5 inch (165 mm) speakers into the doors of a Mercedes Sprinter, making audio upgrades simple while keeping the factory mounting location.\u003c\/p\u003e\n\u003cp\u003eA practical solution for fitting larger aftermarket speakers without cutting the door panel.\u003c\/p\u003e\n\u003cp\u003e🚐 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Mercedes-Benz Sprinter\u003cbr\u003e✔ 2006 and newer models\u003cbr\u003e✔ Front door speaker locations\u003c\/p\u003e\n\u003cp\u003eCompatibility may vary slightly by year and trim — please check measurements if unsure.\u003c\/p\u003e\n\u003cp\u003e🔊 Speaker Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Designed for 6.5 inch (165 mm) speakers\u003cbr\u003e✔ Works with most aftermarket speaker brands\u003cbr\u003e✖ Not suitable for other speaker sizes\u003c\/p\u003e\n\u003cp\u003e🛠 Installation Notes\u003c\/p\u003e\n\u003cp\u003eDesigned to mount in the factory door location\u003c\/p\u003e\n\u003cp\u003eUses original or aftermarket speaker screws\u003c\/p\u003e\n\u003cp\u003eDepending on speaker brand and vehicle tolerances, minor hole adjustment may be required\u003c\/p\u003e\n\u003cp\u003eNo cutting of the door card required\u003c\/p\u003e\n\u003cp\u003e🧱 Manufacturing \u0026amp; Finish Notice\u003c\/p\u003e\n\u003cp\u003eThis item is professionally 3D printed using automotive-grade materials.\u003c\/p\u003e\n\u003cp\u003eDue to the nature of 3D printing, minor cosmetic artifacts or layer lines may be visible, especially on close inspection.\u003cbr\u003eEach adapter is produced with high-quality print settings and careful orientation to minimize these effects wherever possible.\u003c\/p\u003e\n\u003cp\u003eFor customers seeking a perfect show-car finish, light sanding and painting can be done easily, although this is not required for normal installation and use.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003c\/p\u003e\n\u003cp\u003e✔ 2 × Speaker adapter rings (left + right)\u003cbr\u003e✖ Speakers, wiring, and screws not included\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket accessory, not affiliated with Mercedes-Benz.\u003cbr\u003eMinor fitment adjustments may be required depending on speaker brand, model year, and vehicle tolerances.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56591565095295,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/sp1.png?v=1766009319"},{"product_id":"mercedes-a-class-w176-speaker-adapter-rings-set-of-2-door-speaker-mounts","title":"Mercedes A-Class W176 Speaker Adapter Rings – Set of 2 Door Speaker Mounts","description":"\u003cp\u003eMercedes A-Class W176 Speaker Adapter Rings – Set of 2 Door Speaker Mounts\u003c\/p\u003e\n\u003cp\u003eThis speaker adapter ring set is designed for the Mercedes-Benz A-Class W176 and allows proper installation of aftermarket door speakers using the factory mounting location.\u003c\/p\u003e\n\u003cp\u003eThe original speaker opening does not support most aftermarket speakers directly.\u003cbr\u003eThese adapter rings solve that issue by providing a secure and correctly aligned mounting surface — no cutting or permanent modification required.\u003c\/p\u003e\n\u003cp\u003eThis listing includes a set of two (2) adapter rings, suitable for both left and right doors.\u003c\/p\u003e\n\u003cp\u003e🚙 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Mercedes-Benz A-Class W176\u003cbr\u003e✔ Model years 2012–2018\u003cbr\u003e✔ Front door speaker location\u003c\/p\u003e\n\u003cp\u003e🔊 Speaker Compatibility\u003c\/p\u003e\n\u003cp\u003eCompatible with most standard round aftermarket speakers\u003c\/p\u003e\n\u003cp\u003eDesigned to adapt factory speaker opening to aftermarket units\u003c\/p\u003e\n\u003cp\u003eCompatible with most 165 mm \/ 6.5 inch round aftermarket speakers\u003cbr\u003eSpeakers not included.\u003c\/p\u003e\n\u003cp\u003e🛠 Installation\u003c\/p\u003e\n\u003cp\u003eInstalls using the factory speaker mounting points\u003c\/p\u003e\n\u003cp\u003eAftermarket speaker mounts directly to the adapter ring\u003c\/p\u003e\n\u003cp\u003eNo trimming or cutting of the door panel required\u003c\/p\u003e\n\u003cp\u003eUses standard screws\u003c\/p\u003e\n\u003cp\u003eProfessional installation is recommended for best results.\u003c\/p\u003e\n\u003cp\u003e🧱 Manufacturing \u0026amp; Finish Notice\u003c\/p\u003e\n\u003cp\u003eThis is a professionally 3D printed aftermarket product, produced using materials suitable for automotive interior and door panel temperatures.\u003c\/p\u003e\n\u003cp\u003eDue to the nature of 3D printing, minor layer lines or cosmetic imperfections may be visible on close inspection.\u003cbr\u003eThese do not affect fitment, strength, or functionality.\u003c\/p\u003e\n\u003cp\u003eASA material for high-temperature automotive environments.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003c\/p\u003e\n\u003cp\u003e✔ 2 × Speaker adapter rings (left \u0026amp; right)\u003cbr\u003e✖ Speakers, wiring, screws, and vehicle not included\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer\u003c\/p\u003e\n\u003cp\u003eAftermarket accessory, not affiliated with Mercedes-Benz\u003c\/p\u003e\n\u003cp\u003eDesigned for aftermarket speaker installation only\u003c\/p\u003e\n\u003cp\u003eFitment may vary slightly due to vehicle production tolerances, interior wear, or previous modifications\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56591730901375,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/w176.1.png?v=1766015465"},{"product_id":"seat-ibiza-2002-2008-speaker-adapter-rings-set-of-2-165mm","title":"Seat Ibiza 2002–2008 Speaker Adapter Rings – Set of 2, 165mm","description":"\u003cp\u003eSeat Ibiza 2002–2008 Speaker Adapter Rings – Set of 2, 165mm \/ 6.5\" Door Speaker Spacers\u003c\/p\u003e\n\u003cp\u003eThis speaker adapter ring set is designed for the Seat Ibiza (2002–2008) and allows installation of 165 mm \/ 6.5 inch aftermarket speakers into the factory door locations.\u003c\/p\u003e\n\u003cp\u003eThe factory speaker opening does not support most aftermarket speakers directly.\u003cbr\u003eThese spacer rings adapt the original mounting points, ensuring correct alignment, secure fitment, and improved installation quality.\u003c\/p\u003e\n\u003cp\u003eThis listing includes a set of two (2) speaker rings, suitable for left and right doors.\u003c\/p\u003e\n\u003cp\u003e🚗 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Seat Ibiza\u003cbr\u003e✔ Model years 2002–2008\u003cbr\u003e✔ Door speaker locations\u003c\/p\u003e\n\u003cp\u003e🔊 Speaker Compatibility\u003c\/p\u003e\n\u003cp\u003eDesigned for 165 mm \/ 6.5 inch round aftermarket speakers\u003c\/p\u003e\n\u003cp\u003eCompatible with most common brands (Pioneer, JBL, Alpine, Hertz, etc.)\u003c\/p\u003e\n\u003cp\u003eAlso suitable for speakers marketed as 170 mm (standard tolerance)\u003c\/p\u003e\n\u003cp\u003eSpeakers not included.\u003c\/p\u003e\n\u003cp\u003e🧩 Key Features\u003c\/p\u003e\n\u003cp\u003eSet of 2: left + right speaker rings\u003c\/p\u003e\n\u003cp\u003eDirect fit to factory speaker mounting points\u003c\/p\u003e\n\u003cp\u003eAllows clean installation of aftermarket speakers\u003c\/p\u003e\n\u003cp\u003eImproves speaker stability and alignment\u003c\/p\u003e\n\u003cp\u003eIdeal for audio upgrades and restorations\u003c\/p\u003e\n\u003cp\u003e🛠 Installation\u003c\/p\u003e\n\u003cp\u003eMounts to the factory door speaker location\u003c\/p\u003e\n\u003cp\u003eAftermarket speaker mounts directly to the adapter ring\u003c\/p\u003e\n\u003cp\u003eNo cutting of the door panel required\u003c\/p\u003e\n\u003cp\u003eUses standard mounting screws\u003c\/p\u003e\n\u003cp\u003eProfessional installation is recommended for best results.\u003c\/p\u003e\n\u003cp\u003e🧱 Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003eThese speaker rings are professionally 3D printed from ASA plastic, selected for automotive interior and door use.\u003c\/p\u003e\n\u003cp\u003eASA provides:\u003c\/p\u003e\n\u003cp\u003eHigh heat resistance\u003c\/p\u003e\n\u003cp\u003eGood dimensional stability\u003c\/p\u003e\n\u003cp\u003eDurability suitable for door panels and car interiors\u003c\/p\u003e\n\u003cp\u003eDue to the nature of 3D printing, minor layer lines or cosmetic marks may be visible.\u003cbr\u003eThese do not affect fitment or performance.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003c\/p\u003e\n\u003cp\u003e✔ 2 × Speaker adapter rings (left + right)\u003cbr\u003e✖ Speakers, wiring, screws, and vehicle not included\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer\u003c\/p\u003e\n\u003cp\u003eAftermarket audio accessory, not affiliated with Seat\u003c\/p\u003e\n\u003cp\u003eDesigned for aftermarket speaker installation\u003c\/p\u003e\n\u003cp\u003eFitment may vary slightly due to vehicle tolerances or previous modifications\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56595789906303,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/seat1.png?v=1766097619"},{"product_id":"fiat-500-door-speaker-adapter-6-5-set-of-2-front-mount-rings","title":"Fiat 500 Door Speaker Adapter 6.5\" – Set of 2 | Front Mount Rings","description":"\u003cp\u003eFiat 500 Door Speaker Adapter 6.5\" – Set of 2 | Front Mount Rings\u003c\/p\u003e\n\u003cp\u003eThis speaker adapter set is designed to install 6.5 inch aftermarket speakers into the front doors of Fiat 500 vehicles.\u003c\/p\u003e\n\u003cp\u003eThe adapters provide correct spacing and alignment between the speaker and the door, allowing proper mounting without custom fabrication or cutting of the door metal.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a set of 2 adapter rings, suitable for left and right front doors.\u003c\/p\u003e\n\u003cp\u003eCompatibility\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Fiat 500 front doors, model years approximately 2007–2021.\u003c\/p\u003e\n\u003cp\u003eThis adapter size is also used on several Fiat, Alfa Romeo, Opel, Peugeot and Citroën models, however only Fiat 500 front door fitment is guaranteed. If you are unsure about compatibility with another vehicle, please ask before purchasing.\u003c\/p\u003e\n\u003cp\u003eMaterial\u003c\/p\u003e\n\u003cp\u003eThe adapters are made from ASA plastic, which is suitable for automotive interior environments and elevated temperatures.\u003c\/p\u003e\n\u003cp\u003eInstallation Information\u003c\/p\u003e\n\u003cp\u003eInstallation requires removal of the interior door panel.\u003cbr\u003eFactory-installed speakers are typically riveted and may need to be drilled out.\u003c\/p\u003e\n\u003cp\u003eThe adapters are designed to accept standard 6.5 inch speakers, but final installation depends on the speaker brand, mounting depth and wiring configuration.\u003c\/p\u003e\n\u003cp\u003eSpeakers, screws, bolts, clips and wiring are NOT included.\u003cbr\u003eThis listing includes adapter rings only.\u003c\/p\u003e\n\u003cp\u003eImportant – 3D Printing Disclaimer\u003c\/p\u003e\n\u003cp\u003eThis product is 3D printed, not injection molded.\u003c\/p\u003e\n\u003cp\u003eVisible layer lines, surface texture, and minor visual imperfections are normal characteristics of 3D printed parts.\u003cbr\u003eNo sanding, polishing, painting or cosmetic post-processing is performed.\u003c\/p\u003e\n\u003cp\u003eEach part is produced for functional automotive use, not cosmetic perfection.\u003cbr\u003eAppearance may vary slightly from photos.\u003c\/p\u003e\n\u003cp\u003eBy purchasing this item, you acknowledge and accept the nature of 3D printed products.\u003c\/p\u003e\n\u003cp\u003eWhat You Receive\u003c\/p\u003e\n\u003cp\u003eYou will receive 2 speaker adapter rings.\u003cbr\u003eNo additional hardware is included.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56602297106815,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/f5s2.png?v=1766184459"},{"product_id":"fiat-panda-169-rear-door-165mm-speaker-adapter-rings-set-of-2","title":"Fiat Panda 169 Rear Door 165mm Speaker Adapter Rings Set of 2","description":"\u003cp\u003eFiat Panda 169 Rear Door 165mm Speaker Adapter Rings Set of 2\u003c\/p\u003e\n\u003cp\u003eSPEAKER ADAPTER RINGS FOR FIAT PANDA 169\u003c\/p\u003e\n\u003cp\u003eUpgrade your factory rear door speakers to standard 165mm aftermarket speakers\u003cbr\u003eDesigned specifically for Fiat Panda 169 rear doors\u003c\/p\u003e\n\u003cp\u003e––––––––––––––––––––\u003c\/p\u003e\n\u003cp\u003eCOMPATIBILITY\u003c\/p\u003e\n\u003cp\u003eVehicle\u003cbr\u003eFiat Panda 169\u003c\/p\u003e\n\u003cp\u003eInstallation position\u003cbr\u003eRear doors only\u003c\/p\u003e\n\u003cp\u003eSpeaker size\u003cbr\u003e165mm round speakers\u003c\/p\u003e\n\u003cp\u003e––––––––––––––––––––\u003c\/p\u003e\n\u003cp\u003eWHAT IS INCLUDED\u003c\/p\u003e\n\u003cp\u003eSet of 2 speaker adapter rings\u003cbr\u003eFor left and right rear doors\u003c\/p\u003e\n\u003cp\u003eSpeakers are NOT included\u003cbr\u003eScrews are NOT included\u003cbr\u003eWiring is NOT included\u003c\/p\u003e\n\u003cp\u003e––––––––––––––––––––\u003c\/p\u003e\n\u003cp\u003eINSTALLATION NOTES\u003c\/p\u003e\n\u003cp\u003eAdapters mount directly to the factory door mounting points\u003cbr\u003eDoor panel fits back without visible modification\u003c\/p\u003e\n\u003cp\u003eFactory speakers are riveted and must be drilled out\u003cbr\u003eOnly the internal plastic speaker ring inside the door card may need removal\u003cbr\u003eThis does not affect the visible interior trim\u003c\/p\u003e\n\u003cp\u003e––––––––––––––––––––\u003c\/p\u003e\n\u003cp\u003eIMPORTANT INFORMATION\u003c\/p\u003e\n\u003cp\u003eRear doors only\u003cbr\u003eNot compatible with front doors\u003cbr\u003eCheck speaker depth before installation\u003cbr\u003eProfessional installation is recommended\u003c\/p\u003e\n\u003cp\u003e––––––––––––––––––––\u003c\/p\u003e\n\u003cp\u003eMANUFACTURING DISCLAIMER\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket automotive part\u003cbr\u003eProduced using additive manufacturing technology\u003cbr\u003eVisible layer lines and minor surface variations are normal\u003cbr\u003eThese do not affect fit strength or functionality\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56602372931967,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/pan2.png?v=1766185187"},{"product_id":"fiat-124-spider-2000-front-6-5-inch-speaker-adapter-set-interior-audio-upgrade","title":"Fiat 124 Spider 2000 Front 6.5 Inch Speaker Adapter Set Interior Audio Upgrade","description":"\u003cp\u003eFiat 124 Spider 2000 Front 6.5 Inch Speaker Adapter Set Interior Audio Upgrade\u003c\/p\u003e\n\u003cp\u003eThis is a front speaker adapter set designed to install 6.5 inch (165 mm) aftermarket speakers into the front interior location of the Fiat 124 Spider 2000 (classic)\u003c\/p\u003e\n\u003cp\u003eThe adapter allows upgrading the factory speaker size without cutting or modifying the metal body\u003c\/p\u003e\n\u003cp\u003eOnly minor trimming of the original plastic panel is required to accommodate the larger speaker opening\u003c\/p\u003e\n\u003cp\u003eDesigned for classic car audio upgrades while keeping the interior layout clean and functional\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eFront speaker adapter for 6.5 inch speakers\u003cbr\u003eDesigned for Fiat 124 Spider 2000\u003cbr\u003eAllows installation of modern aftermarket speakers\u003cbr\u003eNo cutting or modification of metal body required\u003cbr\u003eImproves sound quality compared to factory speakers\u003cbr\u003eDesigned for secure mounting and proper alignment\u003c\/p\u003e\n\u003cp\u003eSET DETAILS\u003c\/p\u003e\n\u003cp\u003eSet of 2 speaker adapters\u003cbr\u003eLeft and right side included\u003c\/p\u003e\n\u003cp\u003eDesigned for front interior speaker locations\u003c\/p\u003e\n\u003cp\u003eVEHICLE COMPATIBILITY\u003c\/p\u003e\n\u003cp\u003eFiat 124 Spider\u003cbr\u003eFiat 124 Spider 2000\u003cbr\u003eClassic models\u003c\/p\u003e\n\u003cp\u003eINSTALLATION NOTES\u003c\/p\u003e\n\u003cp\u003eOriginal map pockets must be removed\u003cbr\u003eNo need to cut or enlarge the metal body opening\u003cbr\u003eMinor trimming of the original plastic panel is required\u003cbr\u003eFoam weatherstrip tape is recommended between layers\u003cbr\u003eTest-fit before final installation\u003c\/p\u003e\n\u003cp\u003eProfessional installation recommended for best results\u003c\/p\u003e\n\u003cp\u003eWHAT IS INCLUDED\u003c\/p\u003e\n\u003cp\u003e2 front speaker adapters\u003cbr\u003eSet of two pieces\u003c\/p\u003e\n\u003cp\u003eSpeakers, screws, wiring and sound insulation materials are not included\u003c\/p\u003e\n\u003cp\u003eDIMENSIONS\u003c\/p\u003e\n\u003cp\u003eOverall size\u003cbr\u003e• Width: 189.4 mm\u003cbr\u003e• Height: 189.4 mm\u003cbr\u003e• Depth: 62.2 mm\u003c\/p\u003e\n\u003cp\u003eDesigned to fit the front speaker location of Fiat 124 Spider 2000\u003cbr\u003eAlways compare speaker depth and mounting clearance before purchase\u003c\/p\u003e\n\u003cp\u003eIMPORTANT NOTES\u003c\/p\u003e\n\u003cp\u003eDesigned for 6.5 inch (165 mm) speakers\u003cbr\u003eSpeaker depth and mounting style may vary by brand\u003cbr\u003eCheck speaker dimensions before purchase\u003cbr\u003eNot an OEM part\u003c\/p\u003e\n\u003cp\u003eMATERIAL DISCLAIMER\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed automotive interior part\u003cbr\u003eMinor surface texture or layer lines are normal\u003cbr\u003eDesigned for functional use in classic car interiors\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56604675309951,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/spi6.png?v=1766193447"},{"product_id":"fiat-grande-punto-199-front-17-cm-speaker-adapter-ring-set-door-audio-upgrade","title":"Fiat Grande Punto 199 Front 17 cm Speaker Adapter Ring Set Door Audio Upgrade","description":"\u003cp\u003eFiat Grande Punto 199 Front 17 cm Speaker Adapter Ring Set Door Audio Upgrade\u003c\/p\u003e\n\u003cp\u003eThis is a front door speaker adapter ring set designed to install 17 cm (6.5 inch) aftermarket speakers in the Fiat Grande Punto Type 199\u003c\/p\u003e\n\u003cp\u003eThe adapter allows direct fitment of standard 17 cm speakers into the factory front door location, ensuring correct alignment and secure mounting\u003c\/p\u003e\n\u003cp\u003eIdeal solution for upgrading factory audio while keeping the original door structure intact\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eFront door speaker adapter rings\u003cbr\u003eDesigned for Fiat Grande Punto Type 199\u003cbr\u003eCompatible with 17 cm (6.5 inch) speakers\u003cbr\u003eCorrect bolt pattern and spacing\u003cbr\u003eEnsures secure and centered speaker mounting\u003cbr\u003eImproves installation quality and sound performance\u003c\/p\u003e\n\u003cp\u003eSET DETAILS\u003c\/p\u003e\n\u003cp\u003eSet of 2 speaker adapter rings\u003cbr\u003eLeft and right side included\u003c\/p\u003e\n\u003cp\u003eDesigned for front door speaker locations\u003c\/p\u003e\n\u003cp\u003eVEHICLE COMPATIBILITY\u003c\/p\u003e\n\u003cp\u003eFiat Grande Punto\u003cbr\u003eType 199\u003c\/p\u003e\n\u003cp\u003eCommonly also fits Fiat Punto Evo with the same front door speaker layout\u003cbr\u003ePlease compare before purchase\u003c\/p\u003e\n\u003cp\u003eSPEAKER COMPATIBILITY\u003c\/p\u003e\n\u003cp\u003eDesigned for 17 cm (6.5 inch) speakers\u003c\/p\u003e\n\u003cp\u003eSpeaker mounting details:\u003cbr\u003e• Speaker mounting holes: 4 mm\u003cbr\u003e• Bolt circle diameter: 158 mm\u003c\/p\u003e\n\u003cp\u003eCompatible with most aftermarket brands (Pioneer, JBL, Alpine, etc.)\u003c\/p\u003e\n\u003cp\u003eSpeakers are not included\u003c\/p\u003e\n\u003cp\u003eINSTALLATION NOTES\u003c\/p\u003e\n\u003cp\u003eInstalls in the factory front door speaker location\u003cbr\u003eUses standard mounting screws\u003cbr\u003eNo cutting of the metal door required\u003cbr\u003eTest-fit recommended before final installation\u003c\/p\u003e\n\u003cp\u003eProfessional installation recommended for best results\u003c\/p\u003e\n\u003cp\u003eWHAT IS INCLUDED\u003c\/p\u003e\n\u003cp\u003e2 front door speaker adapter rings\u003c\/p\u003e\n\u003cp\u003eSpeakers, screws, wiring and sound insulation are not included\u003c\/p\u003e\n\u003cp\u003eIMPORTANT NOTES\u003c\/p\u003e\n\u003cp\u003eDesigned for front doors only\u003cbr\u003eSpeaker depth may vary by brand\u003cbr\u003eCheck speaker dimensions before purchase\u003cbr\u003eNot an OEM part\u003c\/p\u003e\n\u003cp\u003eMATERIAL DISCLAIMER\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed automotive interior part\u003cbr\u003eMinor surface texture or layer lines are normal\u003cbr\u003eDesigned for functional use inside vehicle doors\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56609044431231,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/pun1.png?v=1766257174"},{"product_id":"fiat-ducato-6-5-inch-speaker-adapter-rings-set-of-2","title":"Fiat Ducato 6.5 Inch Speaker Adapter Rings – Set of 2","description":"\u003cp\u003eFiat Ducato 6.5 Inch Speaker Adapter Rings – Set of 2\u003c\/p\u003e\n\u003cp\u003eThese speaker adapter rings allow installation of standard 6.5 inch (165 mm) aftermarket speakers in Fiat Ducato vans and equivalent models, using factory mounting locations.\u003c\/p\u003e\n\u003cp\u003eDesigned to replace the original low-quality factory speakers and make upgrading the sound system straightforward, without permanent modifications.\u003c\/p\u003e\n\u003cp\u003eThe adapter aligns with OEM mounting points for a clean and secure installation.\u003c\/p\u003e\n\u003cp\u003eCOMPATIBILITY\u003c\/p\u003e\n\u003cp\u003eVehicles:\u003c\/p\u003e\n\u003cp\u003eFiat Ducato\u003c\/p\u003e\n\u003cp\u003eCitroën Jumper\u003c\/p\u003e\n\u003cp\u003ePeugeot Boxer\u003c\/p\u003e\n\u003cp\u003eOther equivalent platform vans\u003c\/p\u003e\n\u003cp\u003eSpeaker size:\u003c\/p\u003e\n\u003cp\u003eStandard 6.5 inch (165 mm) aftermarket speakers\u003c\/p\u003e\n\u003cp\u003eINSTALLATION NOTES\u003c\/p\u003e\n\u003cp\u003eUses factory mounting points\u003c\/p\u003e\n\u003cp\u003eNo cutting of metal required\u003c\/p\u003e\n\u003cp\u003eMinor trimming of door panel may be required depending on speaker depth\u003c\/p\u003e\n\u003cp\u003eCompatible with most aftermarket speaker brands\u003c\/p\u003e\n\u003cp\u003eSpeakers, screws and wiring are not included\u003c\/p\u003e\n\u003cp\u003eWHAT IS INCLUDED\u003c\/p\u003e\n\u003cp\u003e2 speaker adapter rings (left \u0026amp; right)\u003c\/p\u003e\n\u003cp\u003eDIMENSIONS\u003c\/p\u003e\n\u003cp\u003eSpeaker size supported: 6.5 inch \/ 165 mm\u003c\/p\u003e\n\u003cp\u003eMounting hole spacing: 158 mm\u003c\/p\u003e\n\u003cp\u003eDesigned for standard aftermarket speaker baskets\u003c\/p\u003e\n\u003cp\u003eMATERIAL DISCLAIMER\u003c\/p\u003e\n\u003cp\u003eMade from durable automotive-grade plastic\u003c\/p\u003e\n\u003cp\u003e3D printed part\u003c\/p\u003e\n\u003cp\u003eMinor surface texture variations are normal\u003c\/p\u003e\n\u003cp\u003eDesigned for functional automotive use\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56609100693887,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/fd1.png?v=1766258082"},{"product_id":"mazda-3-gen2-bl-speaker-adapter-rings-6-5-inch-door-speaker-mounting-brackets","title":"Mazda 3 Gen2 BL Speaker Adapter Rings 6.5 Inch – Door Speaker Mounting Brackets","description":"\u003cp\u003eMazda 3 Gen2 BL Speaker Adapter Rings 6.5 Inch – Door Speaker Mounting Brackets – Set of 2\u003c\/p\u003e\n\u003cp\u003eUpgrade your factory door speakers to standard 6.5 inch aftermarket speakers with this pair of custom speaker adapter rings for Mazda 3 Gen2 (BL).\u003c\/p\u003e\n\u003cp\u003eThese adapters allow bolt-on installation without cutting the door card or metal frame.\u003c\/p\u003e\n\u003cp\u003eThe adapters are 3D printed in automotive-grade ASA plastic. Because this is a 3D printed product, minor layer lines or surface artifacts may be visible. The parts are fully usable as supplied, however painting is recommended if you want a perfectly smooth OEM-style finish.\u003c\/p\u003e\n\u003cp\u003e🔹 Key Features\u003c\/p\u003e\n\u003cp\u003e✔ Fits Mazda 3 Gen2 (BL)\u003cbr\u003e✔ Converts factory mount to 6.5\" \/ 165mm speakers\u003cbr\u003e✔ Set of 2 pieces – left \u0026amp; right door\u003cbr\u003e✔ Direct bolt-on installation\u003cbr\u003e✔ Heat-resistant ASA material\u003cbr\u003e✔ 3D printed – minor print artifacts possible\u003cbr\u003e✔ Paintable for perfect cosmetic finish\u003c\/p\u003e\n\u003cp\u003e🔹 Installation\u003c\/p\u003e\n\u003cp\u003eRemove door panel and factory speaker.\u003c\/p\u003e\n\u003cp\u003eBolt the adapter ring to the OEM mounting holes.\u003c\/p\u003e\n\u003cp\u003eMount your 6.5\" speaker onto the adapter.\u003c\/p\u003e\n\u003cp\u003eConnect wiring and reinstall door panel.\u003c\/p\u003e\n\u003cp\u003e⏱ Install time: approx. 20–30 minutes per door.\u003c\/p\u003e\n\u003cp\u003e🔹 Compatibility\u003c\/p\u003e\n\u003cp\u003e• Mazda 3 Gen2 (BL)\u003cbr\u003e• Front or rear doors (verify speaker size before purchase)\u003cbr\u003e• Designed for standard 6.5 inch \/ 165mm speakers\u003cbr\u003e• Speakers not included\u003c\/p\u003e\n\u003cp\u003e🔹 FAQ\u003c\/p\u003e\n\u003cp\u003eQ: Is this OEM plastic?\u003cbr\u003eA: No — these are 3D printed ASA parts. Minor surface artifacts are normal.\u003c\/p\u003e\n\u003cp\u003eQ: Can I paint them?\u003cbr\u003eA: Yes — painting is recommended for best appearance.\u003c\/p\u003e\n\u003cp\u003eQ: Are these sold as a pair?\u003cbr\u003eA: Yes — listing is for 2 adapter rings.\u003c\/p\u003e\n\u003cp\u003e🔹 Processing \u0026amp; Shipping\u003c\/p\u003e\n\u003cp\u003e• Made to order in 1–3 business days\u003cbr\u003e• Ships worldwide\u003cbr\u003e• Securely packaged\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56628187365759,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/gen2.3.png?v=1766594664"},{"product_id":"mazda-mx-5-miata-na-headrest-speaker-enclosures-early-oem-style-box-or-universal-3-5","title":"Mazda MX-5 Miata NA Headrest Speaker Enclosures – Early OEM Style Box or Universal 3.5”","description":"\u003cp\u003eMazda MX-5 Miata NA Headrest Speaker Enclosures – Early OEM Style Box or Universal 3.5” Speaker Cup – Pair\u003c\/p\u003e\n\u003cp\u003eRestore or upgrade your early Mazda MX-5 Miata NA headrest audio system with these 3D printed replacement speaker enclosures.\u003c\/p\u003e\n\u003cp\u003eThis listing offers two versions in one product – choose the style that fits your setup:\u003c\/p\u003e\n\u003cp\u003e🔸 Version A – OEM Style Replacement Box\u003c\/p\u003e\n\u003cp\u003eDirect replacement for the discontinued factory headrest speaker box used on early NA Miatas.\u003c\/p\u003e\n\u003cp\u003e🔸 Version B – Universal 3.5” Speaker Cup\u003c\/p\u003e\n\u003cp\u003eDesigned to accept most 3.5 inch aftermarket speakers, including popular models such as Hifonics ZS35CX and similar sizes.\u003cbr\u003eThis version features a slightly enlarged cone area to clear larger speaker magnets and flexible mounting orientation.\u003c\/p\u003e\n\u003cp\u003eAll parts are 3D printed in automotive-grade ASA plastic. Because these are 3D printed items, minor layer lines or surface artifacts may be visible. The enclosures are fully usable as supplied, however painting is recommended if you want a perfectly smooth OEM-style finish.\u003c\/p\u003e\n\u003cp\u003eSold as a set of 2 pieces.\u003c\/p\u003e\n\u003cp\u003e🔹 Key Features\u003c\/p\u003e\n\u003cp\u003e✔ Fits Mazda MX-5 Miata NA – early headrest speaker seats\u003cbr\u003e✔ Choice of OEM-style box or 3.5” universal speaker cup\u003cbr\u003e✔ Designed for headrest audio installation\u003cbr\u003e✔ Pair included (2 units)\u003cbr\u003e✔ Heat-resistant ASA plastic\u003cbr\u003e✔ 3D printed – minor print artifacts possible\u003cbr\u003e✔ Paintable for perfect cosmetic finish\u003c\/p\u003e\n\u003cp\u003e🔹 Installation\u003c\/p\u003e\n\u003cp\u003eRemove headrest upholstery.\u003c\/p\u003e\n\u003cp\u003eSelect your enclosure version.\u003c\/p\u003e\n\u003cp\u003eInstall speakers into the enclosure.\u003c\/p\u003e\n\u003cp\u003eRefit enclosure into headrest frame.\u003c\/p\u003e\n\u003cp\u003eReinstall upholstery.\u003c\/p\u003e\n\u003cp\u003e⏱ Approximate install time: 30–45 minutes.\u003c\/p\u003e\n\u003cp\u003e🔹 Compatibility\u003c\/p\u003e\n\u003cp\u003e• Mazda MX-5 \/ Miata NA – early models with headrest speakers\u003cbr\u003e• Version B fits most 3.5 inch speakers\u003cbr\u003e• Speakers not included\u003c\/p\u003e\n\u003cp\u003e🔹 FAQ\u003c\/p\u003e\n\u003cp\u003eQ: Which version should I choose?\u003cbr\u003eA: Choose the OEM-style box for factory replacement. Choose the 3.5” cup if installing aftermarket speakers.\u003c\/p\u003e\n\u003cp\u003eQ: Is this OEM plastic?\u003cbr\u003eA: No — these are 3D printed ASA parts. Minor surface artifacts are normal.\u003c\/p\u003e\n\u003cp\u003eQ: Are these sold as a pair?\u003cbr\u003eA: Yes — this listing includes 2 enclosures.\u003c\/p\u003e\n\u003cp\u003e🔹 Processing \u0026amp; Shipping\u003cbr\u003e• Ships worldwide\u003cbr\u003e• Secure packaging\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"A – OEM Style","offer_id":56628237861247,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"B – Universal","offer_id":56628237894015,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/hed10.png?v=1766596825"},{"product_id":"lexus-ls430-rear-speaker-adapter-set-6-5-speaker-mount-brackets","title":"Lexus LS430 Rear Speaker Adapter Set – 6.5” Speaker Mount Brackets","description":"\u003cp\u003eLexus LS430 Rear Speaker Adapter Set – 6.5” Speaker Mount Brackets\u003c\/p\u003e\n\u003cp\u003eUpgrade your Lexus LS430 rear door audio system with this custom 3D-printed rear speaker adapter set, designed to install standard 6.5” (165 mm) aftermarket speakers in place of the factory Mark Levinson system.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a SET OF TWO adapters (left + right).\u003c\/p\u003e\n\u003cp\u003eThe adapters are designed to fit perfectly in the rear doors and allow a clean, solid installation without modifying the door panel.\u003c\/p\u003e\n\u003cp\u003eVehicle Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Lexus LS430\u003cbr\u003e✔ Rear doors\u003cbr\u003e✔ Designed for 6.5” \/ 165 mm speakers\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eSet of 2 adapters – left and right side included\u003c\/p\u003e\n\u003cp\u003eDirect fit design – no trimming of the door panel\u003c\/p\u003e\n\u003cp\u003eCompatible with aftermarket 6.5” speakers\u003c\/p\u003e\n\u003cp\u003eUses factory mounting points\u003c\/p\u003e\n\u003cp\u003eOEM-style geometry for correct speaker depth and alignment\u003c\/p\u003e\n\u003cp\u003eMaterial \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003e3D printed from ASA plastic\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – safe for hot car interiors\u003c\/p\u003e\n\u003cp\u003eUV-resistant – won’t degrade over time\u003c\/p\u003e\n\u003cp\u003eStrong and durable, suitable for speaker mounting\u003c\/p\u003e\n\u003cp\u003eMatte black, OEM-like surface finish\u003c\/p\u003e\n\u003cp\u003e⚠️ As with all 3D-printed parts, minor layer lines or small surface imperfections may be present. This does not affect fit or function.\u003c\/p\u003e\n\u003cp\u003eInstallation Notes\u003c\/p\u003e\n\u003cp\u003eDesigned for rear doors\u003c\/p\u003e\n\u003cp\u003eThe original design is mirrored to create left and right adapters\u003c\/p\u003e\n\u003cp\u003eUses the original speaker wiring connector\u003cbr\u003e(a faston connector can be added to the speaker cable if needed)\u003c\/p\u003e\n\u003cp\u003eSpeakers and hardware are not included\u003c\/p\u003e\n\u003cp\u003eWhat’s Included\u003c\/p\u003e\n\u003cp\u003e✔ 2 × Rear speaker adapter rings (Left + Right)\u003cbr\u003e✖ Speakers not included\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003eOptional painting is recommended if you want a perfect cosmetic finish\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56792545919359,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/ls3.png?v=1768768301"},{"product_id":"skoda-octavia-i-front-door-speaker-adapters-pair-left-right","title":"Skoda Octavia I Front Door Speaker Adapters – Pair (Left \u0026 Right)","description":"\u003cp\u003eSkoda Octavia I Front Door Speaker Adapters – Pair (Left \u0026amp; Right)\u003c\/p\u003e\n\u003cp\u003eDirect-fit speaker adapter set for front doors of Skoda Octavia I, designed to replace factory mounts and allow installation of standard aftermarket speakers.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a complete set: left + right adapter.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility: Skoda Octavia I (1996–2010)\u003c\/p\u003e\n\u003cp\u003eLocation: Front doors\u003c\/p\u003e\n\u003cp\u003eSpeaker size: 165 mm (6.5\")\u003c\/p\u003e\n\u003cp\u003eSold as a set: Left + Right adapters included\u003c\/p\u003e\n\u003cp\u003eConverts factory mounting to standard speaker format\u003c\/p\u003e\n\u003cp\u003eOEM-style fit for clean, secure installation\u003c\/p\u003e\n\u003cp\u003eIdeal for upgrading factory audio system\u003c\/p\u003e\n\u003cp\u003e📐 Technical Specifications\u003c\/p\u003e\n\u003cp\u003eSpeaker outer diameter: 165 mm\u003c\/p\u003e\n\u003cp\u003eInner diameter: 144 mm\u003c\/p\u003e\n\u003cp\u003eAdapter height: 38 mm\u003c\/p\u003e\n\u003cp\u003eTotal height: 43 mm\u003c\/p\u003e\n\u003cp\u003eDesigned to maintain proper speaker depth and alignment in the door.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eDirect replacement for factory speaker mounts\u003c\/p\u003e\n\u003cp\u003eUses original mounting points\u003c\/p\u003e\n\u003cp\u003eNo cutting or permanent modification required\u003c\/p\u003e\n\u003cp\u003eCompatible with most aftermarket 165 mm speakers\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in high-quality ASA, specifically chosen for automotive interiors:\u003c\/p\u003e\n\u003cp\u003eHeat resistant (suitable for door panels)\u003c\/p\u003e\n\u003cp\u003eUV stable\u003c\/p\u003e\n\u003cp\u003eDurable and vibration resistant\u003c\/p\u003e\n\u003cp\u003eAs with all 3D-printed parts, minor surface texture may be present. Optional sanding or painting can be done for a perfect OEM-style finish.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003c\/p\u003e\n\u003cp\u003e1× Left front door speaker adapter\u003c\/p\u003e\n\u003cp\u003e1× Right front door speaker adapter\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56809699246463,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/octa4.png?v=1768990999"},{"product_id":"audi-a4-b8-b9-rear-speaker-adapter-6-5","title":"Audi A4 B8 \/ B9 Rear Speaker Adapter – 6.5","description":"\u003cp\u003eAudi A4 B8 \/ B9 Rear Speaker Adapter – 6.5\" (165mm)\u003c\/p\u003e\n\u003cp\u003eUpgrade the rear door audio system of your Audi A4 with this custom-fit rear speaker adapter, designed to allow installation of standard 6.5 inch (165mm) aftermarket speakers.\u003c\/p\u003e\n\u003cp\u003eThis adapter provides correct mounting depth and alignment, making it easy to replace factory speakers without permanent modifications to the vehicle.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Audi A4 B8 and B9 platforms\u003cbr\u003eCompatible with standard 6.5\" (165mm) speakers\u003cbr\u003eAllows installation of aftermarket speakers (e.g. Focal, Hertz, JBL, etc.)\u003cbr\u003eOEM-style shape for precise fit in the rear door\u003cbr\u003eStable mounting surface – reduces vibration and rattling\u003cbr\u003eDirect replacement adapter – no cutting or modification required\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle: Audi A4 B8 \/ B9\u003cbr\u003eYears: B8 (2008–2015), B9 (2016–2023)*\u003cbr\u003eLocation: Rear door speakers\u003cbr\u003eSpeaker size: 6.5 inch \/ 165mm\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003eBolt-on adapter using factory mounting points\u003cbr\u003eSpeaker wiring connector is not included\u003cbr\u003eMinor wiring adaptation may be required depending on speaker brand\u003c\/p\u003e\n\u003cp\u003e* B9 rear door speakers are very similar to B8, but compatibility should be visually confirmed before installation.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – safe for hot car interiors\u003cbr\u003eUV-stable – suitable for long-term use\u003cbr\u003eRigid and durable construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible due to the manufacturing process.\u003cbr\u003eOptional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Rear Speaker Adapter (single piece)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56812391629183,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/b81.png?v=1769013411"},{"product_id":"subaru-wrx-speaker-adapter-set-front-rear-door-mounts","title":"Subaru WRX Speaker Adapter Set – Front \u0026 Rear Door Mounts","description":"\u003cp\u003eSubaru WRX Speaker Adapter Set – Front \u0026amp; Rear Door Mounts\u003c\/p\u003e\n\u003cp\u003eUpgrade the audio system of your Subaru WRX with this complete speaker adapter set, designed to allow installation of aftermarket speakers while keeping a clean, OEM-style fit.\u003c\/p\u003e\n\u003cp\u003eThis kit includes adapters for both front and rear doors, making it a perfect all-in-one solution for a full speaker upgrade.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Subaru WRX\u003cbr\u003eComplete set: front + rear speaker adapters\u003cbr\u003eAllows installation of aftermarket speakers\u003cbr\u003eOEM-style shape for precise door fitment\u003cbr\u003eStable mounting – reduces vibration and rattling\u003cbr\u003eNo permanent modifications required\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle: Subaru WRX \/ Impreza\u003cbr\u003eTypical fitment: early 2000s models (e.g. 2002–2005 WRX)*\u003c\/p\u003e\n\u003cp\u003eLocation:\u003cbr\u003eFront doors – speaker adapters\u003cbr\u003eRear doors – speaker adapters\u003c\/p\u003e\n\u003cp\u003eSpeaker sizes supported:\u003cbr\u003eFront: 5.25\" (5 1\/4\")\u003cbr\u003eRear: 4\"\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003eUses factory mounting locations\u003cbr\u003eBolt-on fit for speakers and adapter rings\u003cbr\u003eMinor wiring adaptation may be required depending on speaker brand\u003c\/p\u003e\n\u003cp\u003e* Compatibility across similar Impreza \/ WRX models of this generation is very common, but visual confirmation is recommended before installation.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for hot car interiors\u003cbr\u003eUV-stable – will not degrade over time\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Front Speaker Adapters\u003cbr\u003e2× Rear Speaker Adapters\u003c\/p\u003e\n\u003cp\u003e(Complete 4-piece set)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56812664947071,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/wr2.png?v=1769014413"},{"product_id":"saab-900-9-3-speaker-adapter-set-door-dash-mounts","title":"Saab 900 \/ 9-3 Speaker Adapter Set – Door \u0026 Dash Mounts","description":"\u003cp\u003eSaab 900 \/ 9-3 Speaker Adapter Set – Door \u0026amp; Dash Mounts\u003c\/p\u003e\n\u003cp\u003eUpgrade the audio system of your Saab with this complete speaker adapter set, designed to allow installation of aftermarket speakers using factory mounting locations.\u003c\/p\u003e\n\u003cp\u003eThis kit includes adapters for door speakers and dashboard speakers, making it a full solution for upgrading the front audio setup.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Saab 900 and Saab 9-3\u003cbr\u003eComplete set for doors and dashboard\u003cbr\u003eAllows installation of aftermarket speakers\u003cbr\u003eUses original factory mounting points\u003cbr\u003eOEM-style shape for clean and secure fit\u003cbr\u003eNo permanent modifications to the vehicle\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eSaab 900\u003cbr\u003eSaab 9-3 (early generations)\u003c\/p\u003e\n\u003cp\u003eLocations \u0026amp; supported sizes:\u003cbr\u003eDoor speakers: 6.5\" (165mm)\u003cbr\u003eDashboard speakers: 3.5\"\u003c\/p\u003e\n\u003cp\u003eDashboard adapter details:\u003cbr\u003e3.5\" speaker adapted to tweeter-style mounting\u003cbr\u003eTweeter hole diameter: approx. 47mm\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eUses factory mounting locations\u003cbr\u003eM6 bolts required for installation (not included)\u003cbr\u003eIf the vehicle did not originally have door speakers installed, factory wiring may need to be crimped and connected\u003cbr\u003eAdapters are symmetrical – fit both left and right sides\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for hot car interiors\u003cbr\u003eUV-stable – ideal for long-term use\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Door Speaker Adapters (6.5\")\u003cbr\u003e2× Dashboard Speaker Adapters (3.5\")\u003c\/p\u003e\n\u003cp\u003e(Complete set – left \u0026amp; right)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56812720357759,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/sa7.png?v=1769015369"},{"product_id":"porsche-boxster-987-door-speaker-adapter-set-8-woofer-mount","title":"Porsche Boxster 987 Door Speaker Adapter set – 8\" Woofer Mount","description":"\u003cp\u003ePorsche Boxster 987 Door Speaker Adapter set – 8\" Woofer Mount\u003c\/p\u003e\n\u003cp\u003eUpgrade the door audio system of your Porsche Boxster 987 with this custom-fit speaker adapter, designed to allow installation of 8-inch aftermarket woofers in the factory door location.\u003c\/p\u003e\n\u003cp\u003eThis adapter maintains correct speaker positioning while enabling a clean and secure aftermarket audio upgrade.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Porsche Boxster 987\u003cbr\u003eAllows installation of 8\" (200mm) aftermarket woofers\u003cbr\u003eFits the factory door speaker location\u003cbr\u003eOEM-style shape for precise alignment\u003cbr\u003eSolid mounting surface to reduce vibration\u003cbr\u003eDesigned for aftermarket audio upgrades\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle: Porsche Boxster 987\u003cbr\u003eLocation: Door speaker position\u003cbr\u003eSupported speaker size: 8 inch (200mm)\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eAdapter mounts in the factory speaker location\u003c\/p\u003e\n\u003cp\u003eSpeaker mounts to the adapter using M4 sheet metal screws (not included)\u003c\/p\u003e\n\u003cp\u003eMinor modification may be required if reusing the factory wiring plug\u003c\/p\u003e\n\u003cp\u003eFactory speaker basket can be trimmed to recover the original connector if needed\u003c\/p\u003e\n\u003cp\u003eConnector can be secured using hot glue or similar method\u003c\/p\u003e\n\u003cp\u003e⚠️ This product is intended for aftermarket audio installations and assumes basic DIY \/ car audio installation experience.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for high-temperature door environments\u003cbr\u003eUV-stable – will not warp or degrade over time\u003cbr\u003eStrong, rigid construction designed for speaker mounting\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× 8\" Speaker Adapter Ring\u003c\/p\u003e\n\u003cp\u003e(Speaker, screws, wiring, and connectors not included)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56813329973631,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/bo2.png?v=1769029336"},{"product_id":"toyota-yaris-vitz-xp13-door-speaker-adapter-set-socket-no-socket-versions","title":"Toyota Yaris \/ Vitz XP13 Door Speaker Adapter Set – Socket \u0026 No-Socket Versions","description":"\u003cp\u003eToyota Yaris \/ Vitz XP13 Door Speaker Adapter Set – Socket \u0026amp; No-Socket Versions\u003c\/p\u003e\n\u003cp\u003eUpgrade the door audio system of your Toyota Yaris \/ Vitz XP13 with this pair of custom-fit speaker adapters, designed to allow installation of aftermarket speakers using the factory mounting locations.\u003c\/p\u003e\n\u003cp\u003eThis listing is sold as a set of two adapters and is available in two different versions, depending on whether you want to reuse the original speaker socket.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Toyota Yaris \/ Vitz XP13\u003cbr\u003eSet of 2 speaker adapters (left + right)\u003cbr\u003eAllows installation of aftermarket door speakers\u003cbr\u003eOEM-style shape for precise door fitment\u003cbr\u003eImproved fit compared to generic adapters\u003cbr\u003eStable mounting – helps reduce vibration and rattling\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle: Toyota Yaris \/ Toyota Vitz\u003cbr\u003eChassis: XP13\u003cbr\u003eLocation: Front doors\u003c\/p\u003e\n\u003cp\u003eVersion options:\u003c\/p\u003e\n\u003cp\u003eWith socket cutout – allows reuse of the original factory speaker socket (requires soldering wires to the socket)\u003c\/p\u003e\n\u003cp\u003eWithout socket cutout – for direct wiring without using the factory socket\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eOne adapter is mirrored for correct left and right door fitment\u003c\/p\u003e\n\u003cp\u003eMinor wiring work may be required depending on speaker brand\u003c\/p\u003e\n\u003cp\u003eDesigned to mount in the factory speaker location\u003c\/p\u003e\n\u003cp\u003e🔊 Speaker Compatibility (Important)\u003c\/p\u003e\n\u003cp\u003eThis adapter is designed to work with standard aftermarket door speakers.\u003c\/p\u003e\n\u003cp\u003eKnown working example:\u003c\/p\u003e\n\u003cp\u003e6.5\" (165mm) speakers\u003c\/p\u003e\n\u003cp\u003eImpedance: approx. 3–4 Ohm\u003c\/p\u003e\n\u003cp\u003eTested successfully with 3.2 Ohm speakers, working well even with the OEM Toyota tweeter\u003c\/p\u003e\n\u003cp\u003e⚠️ Power handling and sound performance depend on the speaker and vehicle audio system.\u003cbr\u003eAlways verify speaker depth, impedance, and wiring compatibility before installation.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – safe for hot car interiors\u003cbr\u003eUV-stable – suitable for long-term use\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed product. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Door Speaker Adapters\u003cbr\u003e(Select version: with socket cutout \/ without socket cutout)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Yes","offer_id":56813978190207,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true},{"title":"No","offer_id":56813978222975,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/vi2.png?v=1769031084"},{"product_id":"suzuki-jimny-jb74-rear-speaker-adapter-set-3-size-options","title":"Suzuki Jimny JB74 Rear Speaker Adapter Set – 3 Size Options","description":"\u003cp\u003eSuzuki Jimny JB74 Rear Speaker Adapter Set – 3 Size Options\u003c\/p\u003e\n\u003cp\u003eUpgrade the rear audio system of your Suzuki Jimny JB74 with this custom-fit rear speaker adapter set, designed to allow installation of aftermarket speakers using the factory mounting location.\u003c\/p\u003e\n\u003cp\u003eThis listing is sold as a set of two adapters (left + right) and is available in three different versions, depending on speaker size and model.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Suzuki Jimny JB74 (Gen4)\u003cbr\u003eRear door speaker adapter set (2 pcs)\u003cbr\u003eAllows installation of aftermarket rear speakers\u003cbr\u003eOEM-style shape for correct fit and alignment\u003cbr\u003eStable mounting to reduce vibration and rattling\u003cbr\u003eDirect fit in the factory rear speaker location\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle: Suzuki Jimny\u003cbr\u003eChassis: JB74 (Gen4)\u003cbr\u003eYears: 2018+\u003cbr\u003eLocation: Rear speakers\u003c\/p\u003e\n\u003cp\u003eAvailable versions:\u003c\/p\u003e\n\u003cp\u003e5.25\" universal – fits most standard 5.25\" speakers\u003c\/p\u003e\n\u003cp\u003e6.5\" universal – fits most standard 6.5\" speakers\u003c\/p\u003e\n\u003cp\u003e6.5\" Pioneer TS-G1620F-2 – optimized specifically for this speaker model\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eUses factory mounting points\u003c\/p\u003e\n\u003cp\u003eDesigned as a left + right pair\u003c\/p\u003e\n\u003cp\u003eSpeaker screws and wiring not included\u003c\/p\u003e\n\u003cp\u003eMinor wiring adaptation may be required depending on speaker brand\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – safe for hot car interiors\u003cbr\u003eUV-stable – suitable for long-term use\u003cbr\u003eStrong and rigid construction suitable for speaker mounting\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed product. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Rear Speaker Adapters\u003cbr\u003e(Select one version per order)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"5.25\"","offer_id":56814570930559,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"6.5\"","offer_id":56814570963327,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"6.5\" Pioneer TS-G1620F-2","offer_id":56814570996095,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/jm3.png?v=1769033614"},{"product_id":"lexus-es-front-door-6x9-speaker-adapter-rings-pair","title":"Lexus ES Front Door 6\"x9\" Speaker Adapter Rings – Pair","description":"\u003cp\u003eLexus ES Front Door 6\"x9\" Speaker Adapter Rings – Pair\u003c\/p\u003e\n\u003cp\u003eUpgrade the front door audio system of your Lexus ES with this direct-fit speaker adapter set, designed to allow installation of aftermarket 6\"x9\" speakers using the factory mounting locations.\u003c\/p\u003e\n\u003cp\u003eThese adapters provide a solid and accurate mounting solution while maintaining proper speaker alignment and door panel clearance.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Lexus ES front doors\u003cbr\u003eAllows installation of aftermarket 6\"x9\" speakers\u003cbr\u003eUses factory mounting points\u003cbr\u003eMaintains correct speaker depth and positioning\u003cbr\u003eStrong, rigid adapter design\u003cbr\u003eNo permanent modifications required\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eLexus ES\u003cbr\u003eModel year reference: 2017 Lexus ES\u003cbr\u003e(Also commonly shared with Lexus ES 300 \/ 350 platforms)\u003c\/p\u003e\n\u003cp\u003eSpeaker compatibility:\u003cbr\u003eStandard 6\"x9\" aftermarket speakers\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eBolts directly to factory mounting locations\u003cbr\u003eSpeaker mounts to adapter ring\u003cbr\u003eFactory wiring can be retained using plug-and-play harness adapters (not included)\u003cbr\u003eNo cutting or drilling required\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for door panel environments\u003cbr\u003eUV-stable – ideal for long-term interior use\u003cbr\u003eStrong and rigid construction for vibration-free mounting\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Front Door Speaker Adapter Rings\u003c\/p\u003e\n\u003cp\u003e(Sold as a pair – left \u0026amp; right)\u003c\/p\u003e\n\u003cp\u003e⚠️ Speakers, wiring adapters, and mounting hardware are not included.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56850978570623,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/lx1.png?v=1769549418"},{"product_id":"toyota-land-cruiser-fj80-front-door-speaker-adapters-4-5-to-6-conversion-pair","title":"Toyota Land Cruiser FJ80 Front Door Speaker Adapters – 4.5\" to 6\" Conversion (Pair)","description":"\u003cp\u003eToyota Land Cruiser FJ80 Front Door Speaker Adapters – 4.5\" to 6\" Conversion (Pair)\u003c\/p\u003e\n\u003cp\u003eUpgrade the front door audio system of your Toyota Land Cruiser FJ80 with this two-piece speaker adapter set, designed to convert the factory 4.5\" speaker opening to 6\" speakers while providing additional depth for larger speaker magnets.\u003c\/p\u003e\n\u003cp\u003eThis adapter system allows installation of modern aftermarket speakers without interference when closing the door.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Toyota Land Cruiser FJ80\u003cbr\u003eConverts factory 4.5\" front door speakers to 6\"\u003cbr\u003eProvides additional clearance for larger speaker magnets\u003cbr\u003eTwo-piece adapter design for strength and proper spacing\u003cbr\u003eMaintains correct door panel and dash clearance\u003cbr\u003eAllows use of aftermarket speaker grilles\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eToyota Land Cruiser FJ80\u003cbr\u003eModel year reference: 1991 FJ80\u003c\/p\u003e\n\u003cp\u003eSpeaker compatibility:\u003cbr\u003e6\" aftermarket speakers\u003cbr\u003e(Tested with Dayton Reference 6\" midbass drivers)\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eTwo-piece adapter system:\u003c\/p\u003e\n\u003cp\u003eInner mount attaches to door using expansion anchors\u003c\/p\u003e\n\u003cp\u003eOuter mount attaches to inner mount through the door panel\u003c\/p\u003e\n\u003cp\u003eHardware requirements (not included):\u003c\/p\u003e\n\u003cp\u003eInner mount: (4) × M3 × 12 mm screws\u003c\/p\u003e\n\u003cp\u003eInner to outer mount: (4) × M3 × 20 mm screws\u003c\/p\u003e\n\u003cp\u003eSpeaker to outer mount: (6) × M4 × 8 mm screws\u003c\/p\u003e\n\u003cp\u003eSpeaker grille:\u003cbr\u003eAttaches via friction fit to the speaker\u003c\/p\u003e\n\u003cp\u003eClearance note:\u003cbr\u003eSpeaker clears the dash when the door is closed\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for door panel environments\u003cbr\u003eUV-stable – ideal for long-term interior use\u003cbr\u003eStrong and rigid construction for vibration-free audio\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Inner Speaker Mounts\u003cbr\u003e2× Outer Speaker Mounts\u003cbr\u003e2× Speaker Grilles\u003c\/p\u003e\n\u003cp\u003e(Sold as a pair – left \u0026amp; right)\u003c\/p\u003e\n\u003cp\u003e⚠️ Speakers, mounting hardware, and wiring adapters are not included.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56851464749439,"sku":null,"price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/tl2.png?v=1769552662"},{"product_id":"clk-speaker-adapter-mercedes-w208-front-door-rings-165mm","title":"CLK Speaker Adapter Mercedes W208 Door Rings (165mm)","description":"\u003cp\u003eCLK Speaker Adapters Mercedes W208  Rings – Front \u0026amp; Rear Door Conversion\u003c\/p\u003e\n\u003cp\u003e165mm Front \/ 130mm Rear – Factory Speaker Location Upgrade\u003c\/p\u003e\n\u003cp\u003eSpeaker adapter rings designed specifically for the Mercedes-Benz CLK W208, allowing installation of aftermarket speakers while retaining the original factory mounting locations.\u003c\/p\u003e\n\u003cp\u003eThese adapters align aftermarket speakers correctly in the doors, providing a secure, clean installation without cutting or permanent modifications to the visible door panels.\u003c\/p\u003e\n\u003cp\u003eAvailable as front door adapters, rear door adapters, or a complete front + rear set.\u003c\/p\u003e\n\u003cp\u003e⭐ Key Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Mercedes-Benz CLK W208\u003c\/p\u003e\n\u003cp\u003eRetains factory speaker mounting locations\u003c\/p\u003e\n\u003cp\u003eClean, OEM-style installation\u003c\/p\u003e\n\u003cp\u003eProper speaker alignment and depth positioning\u003c\/p\u003e\n\u003cp\u003eCompatible with most aftermarket speakers\u003c\/p\u003e\n\u003cp\u003eNo permanent modifications to visible door panels\u003c\/p\u003e\n\u003cp\u003eAvailable in front, rear, or full set options\u003c\/p\u003e\n\u003cp\u003e🚗 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003eMercedes-Benz CLK W208\u003c\/p\u003e\n\u003cp\u003eCoupe \u0026amp; Cabriolet variants\u003c\/p\u003e\n\u003cp\u003e⚠️ Speaker layout may vary by trim level and model year.\u003cbr\u003ePlease verify your door speaker configuration before ordering.\u003c\/p\u003e\n\u003cp\u003e🔧 Available Variants\u003cbr\u003e🔹 Front Door Adapters (Pair)\u003c\/p\u003e\n\u003cp\u003eSpeaker size: 165 mm (6.5\")\u003c\/p\u003e\n\u003cp\u003eLocation: Front\u003c\/p\u003e\n\u003cp\u003eQuantity: 2 adapters\u003c\/p\u003e\n\u003cp\u003eUses factory front door mounting points\u003c\/p\u003e\n\u003cp\u003e🔹 Rear Door Adapters (Pair)\u003c\/p\u003e\n\u003cp\u003eSpeaker size: 130 mm (5.25\")\u003c\/p\u003e\n\u003cp\u003eLocation: Rear\u003c\/p\u003e\n\u003cp\u003eQuantity: 2 adapters\u003c\/p\u003e\n\u003cp\u003eFits factory rear speaker location\u003c\/p\u003e\n\u003cp\u003e🔹 Full Set (Front + Rear)\u003c\/p\u003e\n\u003cp\u003e2× Front adapters (165 mm)\u003c\/p\u003e\n\u003cp\u003e2× Rear adapters (130 mm)\u003c\/p\u003e\n\u003cp\u003eComplete speaker adapter solution for the vehicle\u003c\/p\u003e\n\u003cp\u003e⚠️ Installation \u0026amp; Clearance Notice (Important)\u003c\/p\u003e\n\u003cp\u003eSpeakers are mounted to the adapters using self-tapping screws.\u003c\/p\u003e\n\u003cp\u003ePlease ensure correct screw length to avoid damage to the speaker frame.\u003c\/p\u003e\n\u003cp\u003eRear door adapters:\u003cbr\u003eIf your selected speaker has excessive mounting depth, additional clearance behind the adapter may be required.\u003cbr\u003eIn some cases, this can involve cutting or modifying the inner door panel behind the speaker location.\u003c\/p\u003e\n\u003cp\u003eSpeaker depth and internal door structure vary by speaker brand, model, and vehicle trim level.\u003cbr\u003eTest-fit is strongly recommended before final installation.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation Overview\u003c\/p\u003e\n\u003cp\u003eAdapters mount directly into the factory speaker locations\u003c\/p\u003e\n\u003cp\u003eSpeakers attach to adapters using self-tapping screws\u003c\/p\u003e\n\u003cp\u003eNo permanent modification to visible door panels required\u003c\/p\u003e\n\u003cp\u003eWiring, speakers, and mounting hardware are not included\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA plastic\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for hot vehicle interiors\u003c\/p\u003e\n\u003cp\u003eStrong and durable for long-term automotive use\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed aftermarket accessory, not an OEM part.\u003cbr\u003eMinor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding or painting is recommended for a factory-style finish.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003eDepending on selected variant:\u003c\/p\u003e\n\u003cp\u003eFront set:\u003cbr\u003e2× Front door speaker adapter rings (165 mm)\u003c\/p\u003e\n\u003cp\u003eRear set:\u003cbr\u003e2× Rear door speaker adapter rings (130 mm)\u003c\/p\u003e\n\u003cp\u003eFull set:\u003cbr\u003e2× Front adapters + 2× Rear adapters (4 total)\u003c\/p\u003e\n\u003cp\u003e(Speakers, screws, and wiring are not included)\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket 3D-printed product, not an OEM Mercedes-Benz part\u003c\/p\u003e\n\u003cp\u003eAlways confirm speaker size, depth, and door configuration before ordering\u003c\/p\u003e\n\u003cp\u003eMinor cosmetic imperfections are normal for 3D-printed products\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Front set","offer_id":58923366809983,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"Rear set","offer_id":58923366842751,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true},{"title":"Full set","offer_id":58923366875519,"sku":null,"price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/clk1.png?v=1769866292"},{"product_id":"focus-speaker-adapters-ford-mk2-rings-front-door-6-5-165mm","title":"Focus Speaker Adapters Ford MK2 Rings – Front Door 6.5\" (165mm)","description":"\u003cp\u003eFocus Speaker Adapters Ford MK2 Rings – Front Door 6.5\" (165mm)\u003c\/p\u003e\n\u003cp\u003eSet of 2 – Factory Speaker Location Conversion\u003c\/p\u003e\n\u003cp\u003eThese front door speaker adapter rings are designed specifically for the Ford Focus MK2, allowing you to install 6.5\" (165 mm) aftermarket speakers into the factory door locations while retaining the original mounting points.\u003c\/p\u003e\n\u003cp\u003eThe adapters ensure correct speaker alignment, proper depth positioning, and a clean OEM-style installation without cutting or permanent modifications to the door panel.\u003c\/p\u003e\n\u003cp\u003eSold as a pair (2 adapters) for left and right front doors.\u003c\/p\u003e\n\u003cp\u003e⭐ Key Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Ford Focus MK2\u003c\/p\u003e\n\u003cp\u003eConverts factory speaker mount to accept 6.5\" \/ 165 mm speakers\u003c\/p\u003e\n\u003cp\u003eMaintains correct speaker position and depth\u003c\/p\u003e\n\u003cp\u003eUses original factory mounting points\u003c\/p\u003e\n\u003cp\u003eCompatible with most aftermarket 6.5\" speakers\u003c\/p\u003e\n\u003cp\u003eClean, OEM-style fit\u003c\/p\u003e\n\u003cp\u003eSupplied as a pair (2 adapters)\u003c\/p\u003e\n\u003cp\u003e🚗 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003eFord Focus MK2\u003c\/p\u003e\n\u003cp\u003eFront door speaker locations\u003c\/p\u003e\n\u003cp\u003e⚠️ Speaker layout and depth clearance may vary by trim level and model year.\u003cbr\u003ePlease verify speaker size and door configuration before ordering.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eAdapters mount directly into the factory speaker locations\u003c\/p\u003e\n\u003cp\u003eSpeakers attach to adapters using self-tapping screws\u003c\/p\u003e\n\u003cp\u003eNo cutting or permanent modifications required\u003c\/p\u003e\n\u003cp\u003eTest-fit recommended before final installation\u003c\/p\u003e\n\u003cp\u003e(Speakers, screws, and wiring are not included.)\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA plastic\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for hot vehicle interiors\u003c\/p\u003e\n\u003cp\u003eStrong and durable for long-term use\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed physical product, not a digital file.\u003cbr\u003eMinor layer lines or surface marks may be visible.\u003cbr\u003eOptional sanding or painting is recommended for a factory-style finish.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e2× Ford Focus MK2 front door speaker adapter rings (6.5\" \/ 165 mm)\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eAftermarket 3D-printed accessory, not an OEM Ford part\u003c\/p\u003e\n\u003cp\u003eAlways confirm speaker size and mounting depth before ordering\u003c\/p\u003e\n\u003cp\u003eMinor cosmetic imperfections are normal for 3D-printed products\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56897859649919,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/fs4.png?v=1770249166"},{"product_id":"bmw-e30-tweeter-speaker-mounts-42mm-door-sail-panel-adapters-pair-black","title":"BMW E30 Tweeter Speaker Mounts – 42mm Door Sail Panel Adapters (Pair) black","description":"\u003cp\u003eBMW E30 Tweeter Speaker Mounts – 42mm Door Sail Panel Adapters (Pair)\u003c\/p\u003e\n\u003cp\u003eUpgrade your BMW E30 sound system with these precision-fit tweeter mounts designed for clean installation in the factory sail panel location. Carefully measured and refined for accurate fitment, these adapters allow installation of 42mm tweeters while maintaining an OEM-style appearance.\u003c\/p\u003e\n\u003cp\u003eSold as a pair (left + right).\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003e• Designed specifically for BMW E30\u003cbr\u003e• Fits 42mm tweeters\u003cbr\u003e• Clean OEM-style integration\u003cbr\u003e• Factory sail panel mounting position\u003cbr\u003e• Secure speaker housing\u003cbr\u003e• Strong snap-fit mounting tabs\u003cbr\u003e• Designed for proper tweeter alignment\u003c\/p\u003e\n\u003cp\u003ePerfect for:\u003cbr\u003e• Audio upgrades\u003cbr\u003e• Custom sound builds\u003cbr\u003e• Period-correct interior setups\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eBMW E30\u003c\/p\u003e\n\u003cp\u003eTweeter opening diameter:\u003cbr\u003e42mm\u003c\/p\u003e\n\u003cp\u003e⚠️ Designed for 42mm tweeters – please verify your speaker size before ordering.\u003cbr\u003e⚠️ Professional installation recommended for best results.\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003e• Installs in factory sail panel location\u003cbr\u003e• Designed to replace or modify original tweeter housing\u003cbr\u003e• May require adhesive depending on speaker design\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only.\u003c\/p\u003e\n\u003cp\u003e• Heat-resistant – safe for door-mounted installation\u003cbr\u003e• UV-stable – long-term durability\u003cbr\u003e• Strong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Tweeter Mount Adapters\u003cbr\u003e(Left + Right – sold as a pair)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57044642365823,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/il_fullxfull.7943769570_lkjm.webp?v=1793120009"},{"product_id":"honda-civic-speaker-adapters-2001-2005-7th-gen-front-doors-pair-6-black","title":"Honda Civic Speaker Adapters 2001–2005 (7th Gen) Front Doors Pair – 6\" black","description":"\u003cp\u003eHonda Civic Speaker Adapters 2001–2005 (7th Gen) Front Doors Pair – 6\" black\u003c\/p\u003e\n\u003cp\u003eUpgrade the front door audio system of your Honda Civic with this custom speaker adapter pair, designed to allow installation of 6\" aftermarket speakers using the factory mounting location.\u003c\/p\u003e\n\u003cp\u003eTested on a 2002 model.\u003cbr\u003eFor other years within the 7th generation, please compare mounting shape and hole positions before purchase.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Honda Civic 7th Generation (2001–2005)\u003cbr\u003eAllows installation of 6\" (approx. 165mm) aftermarket speakers\u003cbr\u003eUses factory door mounting position\u003cbr\u003eOEM-style outer profile for proper alignment\u003cbr\u003eStrong and rigid construction\u003cbr\u003eNo permanent modifications required\u003c\/p\u003e\n\u003cp\u003eSpeaker size supported:\u003cbr\u003e6\" (approx. 165mm)\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003e• Uses factory mounting holes\u003cbr\u003e• Standard speaker screws required (not included)\u003cbr\u003e• Adapters are symmetrical – fit left and right\u003cbr\u003e• Sold as a pair (2 pieces)\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for hot car interiors (approx. 90–100°C short-term exposure)\u003cbr\u003eUV-stable – will not warp under sun exposure\u003cbr\u003eMoisture-resistant – safe for door cavity environment\u003cbr\u003eRigid multi-wall construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Front Door Speaker Adapters (6\")\u003cbr\u003e(Sold as a pair – left \u0026amp; right)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57044660715903,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/il_fullxfull.7737440844_mm9v.webp?v=1772293903"},{"product_id":"bmw-e30-tweeter-pod-set-a-pillar-door-triangle-speaker-mount","title":"BMW E30 Tweeter Pod Set – A-Pillar \/ Door Triangle Speaker Mount","description":"\u003cp\u003eBMW E30 Tweeter Pod Set – A-Pillar \/ Door Triangle Speaker Mount (DIY Version)\u003c\/p\u003e\n\u003cp\u003eUpgrade your BMW E30 interior with these custom tweeter pods designed to fit the front door mirror triangle area.\u003c\/p\u003e\n\u003cp\u003eThis version is a DIY-style mount without rear clips and requires custom installation.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for plug-and-play triangle trims with clips, please check our other listings — we offer a separate version with integrated mounting clips.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for BMW E30\u003cbr\u003eFits front door mirror triangle area\u003cbr\u003eAvailable in 4 inner diameter versions\u003cbr\u003eClean OEM-style triangular shape\u003cbr\u003eAllows installation of aftermarket tweeters\u003cbr\u003eStrong and rigid construction\u003cbr\u003eLightweight design\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eBMW E30 (all body styles with standard mirror triangles)\u003c\/p\u003e\n\u003cp\u003eLocation:\u003cbr\u003eFront door mirror triangle (left \u0026amp; right)\u003c\/p\u003e\n\u003cp\u003eAvailable inner hole diameters:\u003cbr\u003e34mm\u003cbr\u003e36mm\u003cbr\u003e38mm\u003cbr\u003e42mm\u003c\/p\u003e\n\u003cp\u003eImportant:\u003cbr\u003e• This version does NOT include rear mounting clips\u003cbr\u003e• DIY installation required\u003cbr\u003e• Can be installed by transferring original clips from OEM trim or by bonding directly to the triangle panel\u003cbr\u003e• Professional installation recommended if unsure\u003c\/p\u003e\n\u003cp\u003ePlease measure your tweeters before ordering and select the correct inner diameter option.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – safe for hot interior conditions (approx. 90–100°C short-term exposure)\u003cbr\u003eUV-stable – suitable for long-term sun exposure\u003cbr\u003eStrong multi-wall construction\u003cbr\u003eDesigned to resist deformation in hot climates\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Tweeter Pods (Left \u0026amp; Right)\u003cbr\u003e(Choose inner diameter from dropdown)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"34mm","offer_id":57044663370111,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"36mm","offer_id":57044663402879,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"38mm","offer_id":57044663435647,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"42mm","offer_id":57044663468415,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/il_fullxfull.7785770213_43xx.webp?v=1772294020"},{"product_id":"vw-golf-mk2-speaker-adapter-door-pair-5-25-130mm-upgrade-mounts-black","title":"VW Golf MK2 Speaker Adapter Door  Pair – 5.25\" (130mm) Upgrade Mounts black","description":"\u003cp\u003eVW Golf MK2 Door Speaker Adapter Pair – 5.25\" (130mm) Upgrade Mounts\u003c\/p\u003e\n\u003cp\u003eUpgrade your VW Golf MK2 door audio system with this custom 5.25\" speaker adapter set.\u003c\/p\u003e\n\u003cp\u003eDesigned to use the factory door pocket area found on late MK2 models, allowing installation of 5.25\" (130mm) aftermarket speakers with minimal modification.\u003c\/p\u003e\n\u003cp\u003eSold as a pair (left \u0026amp; right).\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for VW Golf MK2 (late models with door pockets)\u003cbr\u003eSupports 5.25\" (130mm) aftermarket speakers\u003cbr\u003eUses factory door pocket location\u003cbr\u003eMinimal modification required\u003cbr\u003eReversible installation\u003cbr\u003eStrong and rigid construction\u003cbr\u003eSymmetrical design – fits both sides\u003c\/p\u003e\n\u003cp\u003ePerfect solution for improving sound while keeping classic interior style.\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eVolkswagen Golf MK2 (late models with door storage pockets)\u003c\/p\u003e\n\u003cp\u003eSpeaker size supported:\u003cbr\u003e5.25\" (130mm)\u003c\/p\u003e\n\u003cp\u003eLocation:\u003cbr\u003eLower door pocket area\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003e• No major door panel modification required\u003cbr\u003e• Small holes may be needed for upper mounting screws\u003cbr\u003e• Door pockets can be reinstalled later if desired\u003cbr\u003e• Standard speaker mounting screws required (not included)\u003cbr\u003e• Designed to fit left and right doors\u003c\/p\u003e\n\u003cp\u003ePlease verify your door panel type before purchase.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for hot interior and door cavity temperatures (approx. 90–100°C short-term exposure)\u003cbr\u003eUV-stable – resistant to sun exposure\u003cbr\u003eMoisture-resistant – suitable for door environment\u003cbr\u003eReinforced multi-wall construction for durability\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Door Speaker Adapters (5.25\")\u003cbr\u003e(Sold as a pair – left \u0026amp; right)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57044684243327,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/il_fullxfull.7738042264_r130.avif?v=1772294920"},{"product_id":"yaris-tweeter-adapter-toyota-cross-front-door-mirror-triangle-mount","title":"Yaris Tweeter Adapter Toyota Cross– Front Door Mirror Triangle Mount","description":"\u003cp\u003eYaris Tweeter Adapter Toyota Cross– Front Door Mirror Triangle Mount\u003c\/p\u003e\n\u003cp\u003eUpgrade your Toyota Yaris Cross audio system with this custom tweeter adapter designed to fit inside the front door mirror triangle cover.\u003c\/p\u003e\n\u003cp\u003eAllows installation of aftermarket tweeters without damaging the original factory trim.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Toyota Yaris Cross\u003cbr\u003eFits front door mirror triangle panel\u003cbr\u003eNo permanent modification to original trim\u003cbr\u003eClean OEM-style exterior profile\u003cbr\u003eDesigned for easy audio upgrade\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eIdeal for improving front sound stage without cutting factory panels.\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eToyota Yaris Cross\u003c\/p\u003e\n\u003cp\u003eLocation:\u003cbr\u003eFront door mirror triangle\u003c\/p\u003e\n\u003cp\u003eVersions available:\u003c\/p\u003e\n\u003cp\u003e• 44mm tweeter mount version\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003e• For 44mm version: use 2× M3 screws and nuts to secure tweeter dome\u003cbr\u003e• Hardware not included\u003cbr\u003e• Verify tweeter outer diameter before ordering\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for direct sun exposure inside vehicle (approx. 90–100°C short-term exposure)\u003cbr\u003eUV-stable – resistant to dashboard and window sunlight\u003cbr\u003eMore temperature-stable than PLA\u003cbr\u003eStrong multi-wall construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Tweeter Adapters (Left \u0026amp; Right)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57044695908735,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/il_fullxfull.7786202553_5mjt.webp?v=1772295630"},{"product_id":"vw-golf-4-mk4-165mm-speaker-adapter-set-front-door-mounts-pair","title":"VW Golf 4 (MK4) 165mm Speaker Adapter Set – Front Door Mounts (Pair)","description":"\u003cp\u003eVW Golf 4 (MK4) 165mm Speaker Adapter Set – Front Door Mounts (Pair)\u003c\/p\u003e\n\u003cp\u003eUpgrade your Volkswagen Golf MK4 audio system with this 165mm speaker adapter set designed for front doors.\u003c\/p\u003e\n\u003cp\u003eThese adapters allow installation of standard 165mm (6.5\") aftermarket speakers while maintaining factory fitment and using original mounting points.\u003c\/p\u003e\n\u003cp\u003eSold as a complete set for 2 doors.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Volkswagen Golf 4 (MK4 \/ Golf IV)\u003c\/p\u003e\n\u003cp\u003eSupports standard 165mm (6.5\") speakers\u003c\/p\u003e\n\u003cp\u003eDirect fit to factory door mounting points\u003c\/p\u003e\n\u003cp\u003eMaintains original rubber seal between speaker and door panel\u003c\/p\u003e\n\u003cp\u003eClean OEM-style installation\u003c\/p\u003e\n\u003cp\u003eStrong and durable construction\u003c\/p\u003e\n\u003cp\u003eDesigned for aftermarket speaker upgrades\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eVolkswagen Golf 4 (MK4 \/ Golf IV)\u003c\/p\u003e\n\u003cp\u003eSpeaker compatibility:\u003cbr\u003e165mm (6.5\") speakers\u003c\/p\u003e\n\u003cp\u003eInstallation details:\u003c\/p\u003e\n\u003cp\u003eMounts to factory door locations\u003c\/p\u003e\n\u003cp\u003eDesigned to align with OEM mounting pattern\u003c\/p\u003e\n\u003cp\u003eCompatible with standard 165mm speaker baskets\u003c\/p\u003e\n\u003cp\u003eOriginal rubber gasket between speaker and door card can be reused\u003c\/p\u003e\n\u003cp\u003eAlways compare with your factory mounting pattern before ordering.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for hot interiors\u003c\/p\u003e\n\u003cp\u003eMoisture-resistant – safe for door cavity environment\u003c\/p\u003e\n\u003cp\u003eUV-stable\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines may be visible. Functional automotive component designed for durability.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× 165mm Speaker Adapters\u003cbr\u003e(Complete set for left \u0026amp; right front doors)\u003c\/p\u003e\n\u003cp\u003eSpeakers and mounting hardware not included.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57044723335551,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/il_fullxfull.7791507081_ou4q.avif?v=1772296673"},{"product_id":"audi-a3-s3-rs3-8v-2017-2020-10-subwoofer-adapter-ring-trunk-oem-fit","title":"Audi A3 S3 RS3 8V (2017–2020) 10\" Subwoofer Adapter Ring – Trunk OEM Fit","description":"\u003cp\u003eAudi A3 S3 RS3 8V (2017–2020) 10\" Subwoofer Adapter Ring – Trunk OEM Fit – 8V0035412\u003c\/p\u003e\n\u003cp\u003eUpgraded 10\" subwoofer adapter ring designed for Audi A3 \/ S3 \/ RS3 8V platform (2017–2020).\u003c\/p\u003e\n\u003cp\u003eThis adapter allows installation of a 10-inch subwoofer into the factory rear deck location without cutting the vehicle. Fully reversible to stock.\u003c\/p\u003e\n\u003cp\u003eDesigned around Dayton RSS265HF-4 10\" subwoofer, but may fit other 10\" drivers with similar basket dimensions.\u003c\/p\u003e\n\u003cp\u003e⚠ Important:\u003cbr\u003eThe adapter raises the subwoofer approximately +10mm to prevent cone travel from contacting the factory top cover. This creates a very subtle rear deck bump, visible only if you look closely through the rear-view mirror.\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment\u003c\/p\u003e\n\u003cp\u003e✔ Audi A3 8V (2017–2020)\u003cbr\u003e✔ Audi S3 8V (2017–2020)\u003cbr\u003e✔ Audi RS3 8V (2017–2020)\u003cbr\u003e✔ OEM sub location part number 8V0035412\u003c\/p\u003e\n\u003cp\u003eDesigned for trunk-mounted factory sub position.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e• Top adapter ring\u003cbr\u003e• Bottom support section\u003c\/p\u003e\n\u003cp\u003eSubwoofer, wiring, terminal and hardware are NOT included.\u003c\/p\u003e\n\u003cp\u003e🧱 Material\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA (recommended for automotive interior use).\u003c\/p\u003e\n\u003cp\u003eWhy ASA?\u003c\/p\u003e\n\u003cp\u003eHeat resistant\u003c\/p\u003e\n\u003cp\u003eUV stable\u003c\/p\u003e\n\u003cp\u003eDurable for long-term installation\u003c\/p\u003e\n\u003cp\u003eDesigned to withstand real automotive temperature cycles\u003c\/p\u003e\n\u003cp\u003eAs with all 3D printed parts, minor layer lines may be visible. For a perfectly smooth OEM finish, light sanding and painting is recommended.\u003c\/p\u003e\n\u003cp\u003e⚙ Installation Notes\u003c\/p\u003e\n\u003cp\u003e• No cutting required\u003cbr\u003e• Fully reversible to factory configuration\u003cbr\u003e• Optional: sound deadening mat recommended\u003cbr\u003e• Terminal can be mounted on opposite side (requires drilling holes)\u003c\/p\u003e\n\u003cp\u003eProfessional installation recommended if upgrading full audio system.\u003c\/p\u003e\n\u003cp\u003e🚨 Important Compatibility Note\u003c\/p\u003e\n\u003cp\u003eThis adapter was tested with Dayton RSS265HF-4.\u003cbr\u003eOther 10\" subwoofers may require measurement verification before purchase.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57044742275455,"sku":null,"price":100.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/il_fullxfull.7793467759_4gxq.avif?v=1772297543"},{"product_id":"honda-civic-eg-165mm-speaker-adapter-kit-door-tweeter-mounts-pair-left-right","title":"Honda Civic EG 165mm Speaker Adapter Kit – Door + Tweeter Mounts – Pair (Left \u0026 Right)","description":"\u003cp\u003eComplete front speaker mounting kit designed for Honda Civic EG.\u003c\/p\u003e\n\u003cp\u003eThis kit allows installation of 165mm (6.5\") midrange drivers in the front doors along with dedicated tweeter mounting brackets for the mirror sail panels.\u003c\/p\u003e\n\u003cp\u003eDesigned for clean, solid installation and proper speaker positioning.\u003c\/p\u003e\n\u003cp\u003eCompatible with popular component speaker sets such as Hertz CK 165 and similar 165mm systems.\u003c\/p\u003e\n\u003cp\u003e🔧 What’s Included\u003c\/p\u003e\n\u003cp\u003e• 2x 165mm door speaker adapters (Left + Right)\u003cbr\u003e• 2x Tweeter mounting brackets (Left + Right)\u003cbr\u003e• Designed as a full front set\u003c\/p\u003e\n\u003cp\u003eSpeakers and hardware not included.\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment\u003c\/p\u003e\n\u003cp\u003e✔ Honda Civic EG (1992–1995)\u003cbr\u003e✔ 165mm (6.5\") midrange speakers\u003cbr\u003e✔ Tweeter mounts for power mirror covers\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003e165mm speakers must be used without front grill (to avoid door card interference)\u003c\/p\u003e\n\u003cp\u003eTweeter brackets require drilling 3mm mounting holes\u003c\/p\u003e\n\u003cp\u003eRecommended to add foam gasket between adapter and door\u003c\/p\u003e\n\u003cp\u003e🧱 Material\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA for automotive durability.\u003c\/p\u003e\n\u003cp\u003e• Heat resistant\u003cbr\u003e• UV stable\u003cbr\u003e• Strong and rigid construction\u003cbr\u003e• Suitable for door installation environments\u003c\/p\u003e\n\u003cp\u003eMinor layer lines may be visible due to 3D printing process.\u003cbr\u003eOptional sanding\/paint can provide OEM-like finish.\u003c\/p\u003e\n\u003cp\u003e⚙ Installation Notes\u003c\/p\u003e\n\u003cp\u003e• Midrange driver mounts with M4 screws\u003cbr\u003e• Heat threaded inserts recommended\u003cbr\u003e• Ensure correct tweeter angle during installation\u003cbr\u003e• Professional installation recommended\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57044760330623,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/il_fullxfull.7798870835_g9x1.webp?v=1772298079"},{"product_id":"mazda-mx-5-na-visor-blank-tweeter-carrier-set-pair-31mm-tweeter-mounts","title":"Mazda MX-5 NA Visor Blank \u0026 Tweeter Carrier Set – Pair – 31mm Tweeter Mounts","description":"\u003cp\u003eMazda MX-5 NA Visor Blank \u0026amp; Tweeter Carrier Set – Pair – 31mm Tweeter Mounts\u003c\/p\u003e\n\u003cp\u003eUpgrade your Mazda MX-5 NA interior with this custom pair of visor blank tweeter carriers, designed to provide a cleaner and more integrated way to mount aftermarket tweeters in the factory visor blank locations. These mounts are a great solution for component speaker setups and help position the tweeters neatly in the cabin without an awkward add-on look.\u003c\/p\u003e\n\u003cp\u003eThis version is sold as a pair and was designed around a 31mm tweeter diameter.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003cbr\u003eDesigned for Mazda MX-5 NA \/ Miata NA\u003cbr\u003eSold as a pair\u003cbr\u003eVisor blank tweeter carrier mounts\u003cbr\u003eClean OEM-style integration for aftermarket tweeters\u003cbr\u003eIdeal for component speaker setups\u003cbr\u003eDesigned around a 31mm tweeter diameter\u003cbr\u003eHelps create a neater and more factory-like audio installation\u003cbr\u003eSuitable for custom interior and sound system upgrades\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003cbr\u003eVehicle compatibility:\u003cbr\u003eMazda MX-5 NA\u003cbr\u003eMazda Miata NA\u003c\/p\u003e\n\u003cp\u003eTweeter compatibility:\u003cbr\u003eDesigned around approx. 31mm tweeter diameter\u003cbr\u003eOriginally used with a Hertz tweeter setup\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eDesigned to fit in the visor blank location\u003cbr\u003eSold as left and right pair\u003cbr\u003ePlease compare the shape and tweeter dimensions with your setup before ordering\u003cbr\u003eTweeter grille clearance may vary depending on the specific tweeter used\u003cbr\u003eTest fitting is recommended before final installation\u003cbr\u003eMinor sanding or adjustment may be required depending on print tolerance and vehicle condition\u003cbr\u003eTweeters, grilles, wiring, and hardware are not included\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003cbr\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for hot car interiors\u003cbr\u003eUV-stable – ideal for long-term use\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003cbr\u003e2× Mazda MX-5 NA Visor Blank Tweeter Carriers\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57324002410879,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/na1_d5adadb7-4681-469a-9344-98005bb5216e.png?v=1775847104"},{"product_id":"audi-c4-sail-panel-tweeter-mount-set-pair-morel-mt230-compatible","title":"Audi C4 Sail Panel Tweeter Mount Set – Pair – Morel MT230 Compatible","description":"\u003cp\u003eAudi C4 Sail Panel Tweeter Mount Set – Pair – Morel MT230 Compatible\u003c\/p\u003e\n\u003cp\u003eUpgrade your Audi C4 interior with this custom pair of sail panels designed to replace the original front mirror trim pieces and provide integrated mounts for Morel MT230 tweeters. These panels offer a much cleaner and more OEM-style solution than universal tweeter pods, while keeping the installation neatly positioned at the factory sail panel location.\u003c\/p\u003e\n\u003cp\u003eSold as a left and right pair, this set is ideal for custom audio upgrades and high-quality front stage builds.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003cbr\u003eDesigned for Audi C4\u003cbr\u003eSold as a pair\u003cbr\u003eReplaces the original sail panels\u003cbr\u003eIntegrated tweeter mounts for Morel MT230\u003cbr\u003eClean OEM-style appearance\u003cbr\u003eDesigned for a neater and more factory-like audio installation\u003cbr\u003eIdeal for custom sound system upgrades\u003cbr\u003eLeft and right panels included\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003cbr\u003eVehicle compatibility:\u003cbr\u003eAudi C4\u003c\/p\u003e\n\u003cp\u003eCompatible tweeter:\u003cbr\u003eMorel MT230\u003c\/p\u003e\n\u003cp\u003eAdditional compatibility note:\u003cbr\u003eDesigned specifically for Morel MT230 tweeters\u003cbr\u003eOther tweeters with similar mounting dimensions may fit, but compatibility has not been physically tested and cannot be guaranteed\u003c\/p\u003e\n\u003cp\u003eOEM replacement references:\u003cbr\u003e4A0857505\u003cbr\u003e4A0857506\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eDesigned to replace the original front sail panels\u003cbr\u003e4A0857506 is the mirrored opposite side of 4A0857505\u003cbr\u003ePlease compare your original panel shape and tweeter dimensions before ordering\u003cbr\u003eTest fitting is recommended before final installation\u003cbr\u003eMinor sanding or adjustment may be required depending on print tolerance and vehicle condition\u003cbr\u003eTweeters, wiring, clips, and hardware are not included\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003cbr\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for hot car interiors\u003cbr\u003eUV-stable – ideal for long-term use\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding, primer, or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003cbr\u003e2× Audi C4 Sail Panels with Morel MT230 Tweeter Mounts\u003cbr\u003e(Left + Right pair)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57324197052799,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/au2.png?v=1775849070"}],"url":"https:\/\/www.carculturecyprus.com\/collections\/speaker-mount.oembed?page=6","provider":"Car Culture Cyprus","version":"1.0","type":"link"}