{"title":"Intake","description":"","products":[{"product_id":"ford-fusion-intake-sport-maf-adapter-for-cone","title":"Ford Fusion Intake Sport MAF Adapter for Cone","description":"\u003cp\u003eFord Fusion Intake Sport MAF Adapter for Cone\u003c\/p\u003e\n\u003cp\u003eUpgrade your intake setup with this MAF sensor adapter, designed specifically for the 2010 Ford Fusion Sport. This adapter allows installation of an aftermarket conical (pod-style) air filter while retaining the factory MAF sensor and correct airflow path.\u003c\/p\u003e\n\u003cp\u003eDesigned to match the stock intake diameter, this adapter avoids flow restriction and preserves proper sensor positioning for stable engine operation.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for 2010 Ford Fusion Sport\u003c\/p\u003e\n\u003cp\u003eAllows use of aftermarket conical \/ pod air filters\u003c\/p\u003e\n\u003cp\u003eRetains factory MAF sensor location\u003c\/p\u003e\n\u003cp\u003eMaintains correct airflow diameter\u003c\/p\u003e\n\u003cp\u003eSmooth internal transition to reduce turbulence\u003c\/p\u003e\n\u003cp\u003eOEM-inspired fit and geometry\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003cbr\u003eVehicle compatibility:\u003c\/p\u003e\n\u003cp\u003eFord Fusion Sport – 2010 model year\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eReplaces factory intake section at the MAF location\u003c\/p\u003e\n\u003cp\u003eAccepts aftermarket conical air filters\u003c\/p\u003e\n\u003cp\u003eDesigned to work with the original MAF sensor\u003c\/p\u003e\n\u003cp\u003eHose clamps and filter not included\u003c\/p\u003e\n\u003cp\u003eProfessional installation recommended\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay temperatures\u003c\/p\u003e\n\u003cp\u003eUV-stable – ideal for long-term under-hood use\u003c\/p\u003e\n\u003cp\u003eStrong, rigid construction with thick walls\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding is recommended if a smoother cosmetic finish is desired.\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eIntended for off-road \/ motorsport use\u003c\/p\u003e\n\u003cp\u003eBuyer is responsible for verifying local emissions and road legality\u003c\/p\u003e\n\u003cp\u003eProper installation and sealing are critical for correct operation\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× MAF Adapter for Conical Intake\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56885432516991,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/ff1.png?v=1770059457"},{"product_id":"hilux-intake-toyota-3-air-adapter-with-breather-port-gen-5-gen-6","title":"Hilux Intake Toyota 3\" Air Adapter with Breather Port – Gen 5 \/ Gen 6","description":"\u003cp\u003eHilux Intake Toyota 3\" Air Adapter with Breather Port – Gen 5 \/ Gen 6\u003c\/p\u003e\n\u003cp\u003eUpgrade your intake setup with this 3\" (76 mm) air intake adapter, designed for Toyota Hilux Gen 5 and Gen 6, as well as Volkswagen Taro. This adapter allows installation of a larger aftermarket air filter while retaining a connection for the engine breather hose.\u003c\/p\u003e\n\u003cp\u003eDesigned for reliable fitment and smooth airflow, it’s a practical solution for intake upgrades on older Hilux platforms.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Toyota Hilux Gen 5 \u0026amp; Gen 6\u003c\/p\u003e\n\u003cp\u003eAlso compatible with Volkswagen Taro\u003c\/p\u003e\n\u003cp\u003e3\" \/ 76 mm main intake diameter\u003c\/p\u003e\n\u003cp\u003eIntegrated breather hose port\u003c\/p\u003e\n\u003cp\u003eSmooth internal transition for consistent airflow\u003c\/p\u003e\n\u003cp\u003eClean, functional design suitable for engine bay use\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003cbr\u003eVehicle compatibility:\u003c\/p\u003e\n\u003cp\u003eToyota Hilux Gen 5\u003c\/p\u003e\n\u003cp\u003eToyota Hilux Gen 6\u003c\/p\u003e\n\u003cp\u003eVolkswagen Taro\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eDesigned for 3\" (76 mm) intake systems\u003c\/p\u003e\n\u003cp\u003eCompatible with Biltema sports air intake filter\u003c\/p\u003e\n\u003cp\u003eAny aftermarket 76 mm filter will fit\u003c\/p\u003e\n\u003cp\u003eHose clamps, filter, and breather hose not included\u003c\/p\u003e\n\u003cp\u003eBuyer must verify breather hose diameter compatibility\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay temperatures\u003c\/p\u003e\n\u003cp\u003eUV-stable – suitable for long-term use\u003c\/p\u003e\n\u003cp\u003eStrong, rigid construction with thick walls\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding is recommended for a smoother cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eIntended for aftermarket \/ off-road intake setups\u003c\/p\u003e\n\u003cp\u003eBuyer is responsible for proper installation and sealing\u003c\/p\u003e\n\u003cp\u003eVerify local emissions and road legality before installation\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× 3\" Air Intake Adapter with Breather Port\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56885762359679,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/hi1.png?v=1770061028"},{"product_id":"mx-5-intake-pipe-enlarged-cobra-intake-section","title":"MX-5 Intake Pipe – Enlarged Cobra Intake Section","description":"\u003cp\u003eMX-5 Intake Pipe – Enlarged Cobra Intake Section\u003c\/p\u003e\n\u003cp\u003eCustom enlarged intake pipe section designed for Mazda MX-5 fitted with a Cobra-style intake system, developed to remove flow restrictions present in the original configuration.\u003c\/p\u003e\n\u003cp\u003eThis design increases both inlet and outlet diameters and refines the internal geometry to maintain a more consistent effective airflow area through the bend, improving overall intake efficiency.\u003c\/p\u003e\n\u003cp\u003e⭐ Key Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Mazda MX-5 with Cobra intake setup\u003c\/p\u003e\n\u003cp\u003eEnlarged inlet diameter: 70 mm (2.75\")\u003c\/p\u003e\n\u003cp\u003eOutlet diameter matched to throttle body: 65 mm (2-9\/16\")\u003c\/p\u003e\n\u003cp\u003eOptimized internal geometry for smoother airflow\u003c\/p\u003e\n\u003cp\u003eRevised center section for more consistent equivalent flow area\u003c\/p\u003e\n\u003cp\u003eIntegrated hose barbs to help prevent silicone couplers from slipping\u003c\/p\u003e\n\u003cp\u003eSlightly opened bend angle (approx. 95°) for improved alignment\u003c\/p\u003e\n\u003cp\u003eThese changes ensure the Cobra intake is no longer the main restriction in the intake system.\u003c\/p\u003e\n\u003cp\u003e🚗 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003eMazda MX-5\u003c\/p\u003e\n\u003cp\u003eVehicles using a Cobra-style intake pipe\u003c\/p\u003e\n\u003cp\u003eCustom or modified intake layouts\u003c\/p\u003e\n\u003cp\u003e⚠️ Fitment depends on engine version and surrounding components.\u003cbr\u003ePlease compare photos and dimensions with your setup before ordering.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation Notes\u003c\/p\u003e\n\u003cp\u003eInstalls inline using standard silicone couplers and hose clamps\u003c\/p\u003e\n\u003cp\u003eDesigned to connect directly to a 65 mm throttle body\u003c\/p\u003e\n\u003cp\u003eIntegrated barbs help retain silicone hoses under boost or vibration\u003c\/p\u003e\n\u003cp\u003eHoses, clamps, and fittings are not included\u003c\/p\u003e\n\u003cp\u003eTest-fit recommended before final installation\u003c\/p\u003e\n\u003cp\u003eClearance considerations were taken into account based on radiator and bonnet spacing.\u003c\/p\u003e\n\u003cp\u003e🧠 Technical Design Notes\u003c\/p\u003e\n\u003cp\u003eInlet increased from 63 mm to 70 mm to maximise flow through the tight bend\u003c\/p\u003e\n\u003cp\u003eOutlet set to 65 mm, matching throttle body diameter\u003c\/p\u003e\n\u003cp\u003eMiddle section redesigned to avoid flow inconsistency seen in square or uneven profiles\u003c\/p\u003e\n\u003cp\u003eWall thickness increased to 3 mm for strength, heat resistance, and durability\u003c\/p\u003e\n\u003cp\u003eAlthough the MAF housing measures 70 mm externally, its internal cross-sectional flow area is smaller due to internal geometry.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA plastic\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay environments\u003c\/p\u003e\n\u003cp\u003eUV-stable for long-term use\u003c\/p\u003e\n\u003cp\u003eStrong, rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part.\u003cbr\u003eMinor layer lines or surface marks may be visible.\u003cbr\u003eOptional surface finishing or coating is recommended for a refined appearance.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Enlarged intake pipe section for Mazda MX-5 Cobra intake setup\u003c\/p\u003e\n\u003cp\u003e(No hoses, clamps, or filters included)\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eAftermarket performance accessory, not an OEM part\u003c\/p\u003e\n\u003cp\u003eIntended for custom or modified intake systems\u003c\/p\u003e\n\u003cp\u003eAlways verify dimensions, hose routing, and clearances before purchase\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56902033211775,"sku":null,"price":90.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/cbp1.png?v=1770317507"},{"product_id":"astra-j-intake-opel-a14net-air-adapter-cone-filter-maf-housing","title":"Astra J Intake Opel A14NET Air Adapter – Cone Filter \u0026 MAF Housing","description":"\u003cp\u003eAstra J Intake Opel A14NET Air Adapter – Cone Filter \u0026amp; MAF Housing\u003c\/p\u003e\n\u003cp\u003eCustom hot air intake adapter designed for Opel Astra J with A14NET engine, allowing installation of a cone air filter while retaining the factory MAF sensor.\u003c\/p\u003e\n\u003cp\u003eThis adapter was created because the MAF sensor on the A14NET engine is integrated into the original airbox, making standard cone filter installations impossible without a custom solution.\u003c\/p\u003e\n\u003cp\u003e⭐ Key Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Opel Astra J A14NET\u003c\/p\u003e\n\u003cp\u003eAllows use of a classic cone air filter\u003c\/p\u003e\n\u003cp\u003eRetains original MAF sensor position\u003c\/p\u003e\n\u003cp\u003eClean, direct intake routing\u003c\/p\u003e\n\u003cp\u003eCompatible with standard silicone couplers and hose clamps\u003c\/p\u003e\n\u003cp\u003eMotorsport-inspired, functional design\u003c\/p\u003e\n\u003cp\u003e🚗 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003eOpel Astra J\u003c\/p\u003e\n\u003cp\u003eEngine: A14NET (1.4 Turbo)\u003c\/p\u003e\n\u003cp\u003e⚠️ Compatibility is limited to the A14NET engine.\u003cbr\u003ePlease compare photos and sensor layout before ordering.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation Notes\u003c\/p\u003e\n\u003cp\u003eInstalls in place of the factory airbox intake section\u003c\/p\u003e\n\u003cp\u003eDesigned to accept the OEM MAF sensor\u003c\/p\u003e\n\u003cp\u003eCone filter mounts directly to the adapter\u003c\/p\u003e\n\u003cp\u003eUses standard silicone couplers and hose clamps\u003c\/p\u003e\n\u003cp\u003eCone filter, clamps, and hoses are not included\u003c\/p\u003e\n\u003cp\u003eTest-fit recommended before final installation\u003c\/p\u003e\n\u003cp\u003eThis setup is intended for sound and aesthetic improvement rather than maximum performance.\u003c\/p\u003e\n\u003cp\u003e⚠️ Performance Disclaimer\u003c\/p\u003e\n\u003cp\u003eThis is a hot air intake design.\u003cbr\u003eDepending on driving conditions, intake air temperatures may be higher than with a closed cold-air system.\u003c\/p\u003e\n\u003cp\u003ePower gains: not claimed\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA plastic\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay use\u003c\/p\u003e\n\u003cp\u003eUV-stable and durable\u003c\/p\u003e\n\u003cp\u003eThick walls for structural strength\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed automotive part.\u003cbr\u003eMinor layer lines or surface marks may be visible.\u003cbr\u003eOptional surface finishing or coating is recommended for a refined appearance.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Hot air intake adapter for Opel Astra J A14NET\u003c\/p\u003e\n\u003cp\u003e(MAF sensor, cone filter, hoses, and clamps are not included)\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eAftermarket accessory, not an OEM part\u003c\/p\u003e\n\u003cp\u003eDesigned specifically around the factory MAF sensor\u003c\/p\u003e\n\u003cp\u003eIntended for custom intake setups\u003c\/p\u003e\n\u003cp\u003eAlways verify sensor fitment and clearances before purchase\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56902069682559,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/asj4.png?v=1770318984"},{"product_id":"g35-350z-cold-air-intake-adapter","title":"G35 350Z Cold-Air Intake adapter","description":"\u003cp\u003eG35 350Z Cold-Air Intake adapter\u003c\/p\u003e\n\u003cp\u003eCustom intake duct designed for the Nissan 350Z \/ Infiniti G35 platform, allowing the intake system to draw cooler air from the front area of the engine bay rather than directly from hot under-hood zones.\u003c\/p\u003e\n\u003cp\u003eThis part is intended to convert short-ram style setups into a more isolated cold-air style intake path by relocating the intake opening closer to the front of the vehicle.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Nissan 350Z \/ Infiniti G35 intake layout\u003c\/p\u003e\n\u003cp\u003eHelps isolate intake airflow from engine bay heat\u003c\/p\u003e\n\u003cp\u003eAllows intake filter placement in a cooler airflow zone\u003c\/p\u003e\n\u003cp\u003eSmooth internal geometry for consistent airflow\u003c\/p\u003e\n\u003cp\u003eTested in real driving conditions for extended mileage\u003c\/p\u003e\n\u003cp\u003eDesigned around factory engine bay clearances\u003c\/p\u003e\n\u003cp\u003e⚠️ This product does not claim horsepower gains.\u003cbr\u003eIts purpose is airflow routing and intake air temperature stability.\u003c\/p\u003e\n\u003cp\u003e🚗 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003eNissan 350Z\u003c\/p\u003e\n\u003cp\u003eInfiniti G35\u003c\/p\u003e\n\u003cp\u003e⚠️ Fitment may vary depending on:\u003c\/p\u003e\n\u003cp\u003eIntake setup\u003c\/p\u003e\n\u003cp\u003eFilter size and position\u003c\/p\u003e\n\u003cp\u003eHose routing and couplers used\u003c\/p\u003e\n\u003cp\u003eTest-fit is strongly recommended before final installation.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation Notes (Important)\u003c\/p\u003e\n\u003cp\u003eDesigned to be used with silicone couplers and hose clamps\u003c\/p\u003e\n\u003cp\u003eA gasket is recommended between mating surfaces\u003c\/p\u003e\n\u003cp\u003eGasket should be made from flexible material (rubber, silicone, or similar)\u003c\/p\u003e\n\u003cp\u003eProper sealing is critical for correct operation\u003c\/p\u003e\n\u003cp\u003e⚠️ Due to heat and vapors present in internal combustion engines:\u003c\/p\u003e\n\u003cp\u003eThe part must be securely mounted\u003c\/p\u003e\n\u003cp\u003eRegular inspection is recommended\u003c\/p\u003e\n\u003cp\u003e⚠️ Intended for off-road, competition, or educational use only\u003cbr\u003eUse at your own risk.\u003c\/p\u003e\n\u003cp\u003e🧪 Real-World Use\u003c\/p\u003e\n\u003cp\u003eTested over extended mileage without structural issues\u003c\/p\u003e\n\u003cp\u003eDesigned to withstand typical intake-area temperatures\u003c\/p\u003e\n\u003cp\u003eNot intended for direct contact with exhaust components\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA plastic\u003c\/p\u003e\n\u003cp\u003eHeat-resistant and chemically stable\u003c\/p\u003e\n\u003cp\u003eSuitable for long-term engine bay use\u003c\/p\u003e\n\u003cp\u003ePrinted with solid construction for durability\u003c\/p\u003e\n\u003cp\u003eASA material properties (typical):\u003c\/p\u003e\n\u003cp\u003eContinuous operating temperature: ~95–100 °C\u003c\/p\u003e\n\u003cp\u003eShort-term heat exposure: up to ~120 °C\u003c\/p\u003e\n\u003cp\u003eSuperior resistance to heat cycling, oil vapors, and engine bay conditions compared to ABS\u003c\/p\u003e\n\u003cp\u003e🎨 Surface Finish Notice\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed automotive part:\u003c\/p\u003e\n\u003cp\u003eMinor layer lines or surface marks may be visible\u003c\/p\u003e\n\u003cp\u003eThese do not affect strength or function\u003c\/p\u003e\n\u003cp\u003eOptional sanding or coating is recommended for a refined finish\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Cold-Air Intake Duct (ASA, single piece)\u003c\/p\u003e\n\u003cp\u003e❌ Filter, couplers, clamps, gasket, and hardware are not included\u003cbr\u003e❌ This is not an OEM part\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56902122275199,"sku":null,"price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/gci1.png?v=1770321929"},{"product_id":"mr2-intake-spyder-2zz-adapter-intake-pipe","title":"MR2 Intake Spyder 2ZZ Adapter \/ Intake Pipe","description":"\u003cp\u003eFor 2ZZ Engine Swap\u003c\/p\u003e\n\u003cp\u003eCustom intake adapter designed for Toyota MR2 Spyder with a 2ZZ engine swap.\u003cbr\u003eThe dimensions are inspired by a K\u0026amp;N short ram intake used on the Matrix XRS (2ZZ), adapted for compact mid-engine layout.\u003c\/p\u003e\n\u003cp\u003eThis intake offers strong low- and mid-range response, with only a brief hesitation when the engine is stone cold, which disappears after 30–60 seconds of runtime, as noted by the original designer.\u003c\/p\u003e\n\u003cp\u003e⭐ Key Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for MR2 Spyder with 2ZZ engine swap\u003c\/p\u003e\n\u003cp\u003eDimensions inspired by K\u0026amp;N short ram intake (Matrix XRS 2ZZ)\u003c\/p\u003e\n\u003cp\u003eCompact layout suitable for tight engine bay\u003c\/p\u003e\n\u003cp\u003eSmooth internal airflow path\u003c\/p\u003e\n\u003cp\u003eProven real-world use design\u003c\/p\u003e\n\u003cp\u003eIdeal for custom intake setups and performance builds\u003c\/p\u003e\n\u003cp\u003e⚠️ This product is intended for custom builds and modified vehicles.\u003c\/p\u003e\n\u003cp\u003e🧩 Fitment\u003c\/p\u003e\n\u003cp\u003eToyota MR2 Spyder\u003c\/p\u003e\n\u003cp\u003e2ZZ engine swap only\u003c\/p\u003e\n\u003cp\u003eAftermarket cone filter setups\u003c\/p\u003e\n\u003cp\u003e❗ Not designed for stock 1ZZ engines.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA plastic\u003c\/p\u003e\n\u003cp\u003eASA is chosen for:\u003c\/p\u003e\n\u003cp\u003eHigh heat resistance\u003c\/p\u003e\n\u003cp\u003eExcellent stability in engine bay environments\u003c\/p\u003e\n\u003cp\u003eBetter UV and thermal durability than ABS\u003c\/p\u003e\n\u003cp\u003eSuitable for long-term under-hood use when installed correctly\u003c\/p\u003e\n\u003cp\u003eASA thermal characteristics (typical):\u003c\/p\u003e\n\u003cp\u003eContinuous operating temperature: ~105–110 °C\u003c\/p\u003e\n\u003cp\u003eShort-term peaks: up to ~120 °C\u003c\/p\u003e\n\u003cp\u003e🧠 Performance Notes (Important)\u003c\/p\u003e\n\u003cp\u003eProvides good low- and mid-range response\u003c\/p\u003e\n\u003cp\u003eSlight hesitation may occur when the engine is fully cold\u003c\/p\u003e\n\u003cp\u003eHesitation disappears after short warm-up (30–60 seconds)\u003c\/p\u003e\n\u003cp\u003eNo exaggerated power claims — this is a functional intake component\u003c\/p\u003e\n\u003cp\u003e🛠 Installation Notes\u003c\/p\u003e\n\u003cp\u003eDesigned for use with silicone couplers and clamps\u003c\/p\u003e\n\u003cp\u003eTest-fit recommended before final installation\u003c\/p\u003e\n\u003cp\u003eIntended for enthusiasts familiar with modified intake systems\u003c\/p\u003e\n\u003cp\u003e🖨 3D Printing Disclaimer\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed automotive part:\u003c\/p\u003e\n\u003cp\u003eMinor layer lines or surface marks may be visible\u003c\/p\u003e\n\u003cp\u003eCosmetic imperfections do not affect function\u003c\/p\u003e\n\u003cp\u003eOptional sanding or coating can be applied for a smoother finish\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× MR2 Spyder 2ZZ intake adapter (ASA)\u003c\/p\u003e\n\u003cp\u003e❗ Filter, clamps, hoses, and hardware are not included.\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eAftermarket, non-OEM part\u003c\/p\u003e\n\u003cp\u003eDesigned for modified vehicles only\u003c\/p\u003e\n\u003cp\u003eAlways verify fitment before ordering\u003c\/p\u003e\n\u003cp\u003eInstallation responsibility lies with the buyer\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56905905340799,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/mr1.png?v=1770383414"},{"product_id":"1-9-tdi-cold-air-intake-heat-shield","title":"1.9 TDI Cold Air Intake Heat Shield","description":"\u003cp\u003e1.9 TDI Cold Air Intake Heat Shield \u003c\/p\u003e\n\u003cp\u003eFor Custom Sport \/ Cold Air Intake Setups\u003c\/p\u003e\n\u003cp\u003eThis cold air intake heat shield is designed for custom intake setups on PD and VP 1.9 TDI engines, helping to reduce direct heat exposure from the engine bay and maintain more stable intake air temperatures.\u003c\/p\u003e\n\u003cp\u003eThe shield acts as a physical barrier between the intake filter and surrounding heat sources, supporting cleaner airflow conditions and improved intake air isolation in real driving conditions.\u003c\/p\u003e\n\u003cp\u003e✅ Key Features\u003c\/p\u003e\n\u003cp\u003eDesigned for custom cold air \/ sport intake setups\u003c\/p\u003e\n\u003cp\u003ePhysical heat barrier between intake filter and engine bay heat\u003c\/p\u003e\n\u003cp\u003e72 mm intake opening for Mass Air Flow (MAF) sensor installation\u003c\/p\u003e\n\u003cp\u003eOptimized shape for compact engine bay layouts\u003c\/p\u003e\n\u003cp\u003eClean, functional OEM-style design\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e🚗 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003eSuitable for 1.9 TDI PD and VP engines, including but not limited to:\u003c\/p\u003e\n\u003cp\u003eVolkswagen Golf 4 \/ MK4\u003c\/p\u003e\n\u003cp\u003eAudi A3\u003c\/p\u003e\n\u003cp\u003eSeat Leon\u003c\/p\u003e\n\u003cp\u003eSeat Ibiza\u003c\/p\u003e\n\u003cp\u003eCupra models with 1.9 TDI engines\u003c\/p\u003e\n\u003cp\u003e⚠️ This product is intended for custom intake configurations. Always verify clearance and layout before installation.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA plastic\u003c\/p\u003e\n\u003cp\u003eExcellent heat resistance for engine bay use\u003c\/p\u003e\n\u003cp\u003eStrong, rigid construction for long-term durability\u003c\/p\u003e\n\u003cp\u003eResistant to heat cycling and under-hood conditions\u003c\/p\u003e\n\u003cp\u003eTypical ASA properties:\u003c\/p\u003e\n\u003cp\u003eContinuous operating temperature: ~100–105°C\u003c\/p\u003e\n\u003cp\u003eShort-term peaks: ~115–120°C\u003c\/p\u003e\n\u003cp\u003eThis makes the part suitable for long-term use near intake and engine bay heat sources when installed correctly.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation Notes\u003c\/p\u003e\n\u003cp\u003eDesigned to be used with cone-style intake filters\u003c\/p\u003e\n\u003cp\u003eFoam sealing strip can be added for improved isolation (not included)\u003c\/p\u003e\n\u003cp\u003eHardware and intake components are not included\u003c\/p\u003e\n\u003cp\u003eTest fitting is strongly recommended before final installation\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket 3D printed automotive part, not an OEM component\u003c\/p\u003e\n\u003cp\u003eDesigned for heat shielding and airflow isolation — no horsepower gains are claimed\u003c\/p\u003e\n\u003cp\u003eMinor layer lines or surface marks may be visible due to the 3D printing process\u003c\/p\u003e\n\u003cp\u003eOptional sanding or painting is recommended for a perfect cosmetic finish\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Cold Air Intake Heat Shield\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56907010802047,"sku":null,"price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/tdi6.png?v=1770386415"},{"product_id":"mk3-intake-vw-tdi-air-temperature-sensor-pipe-2","title":"MK3 Intake VW TDI Air Temperature Sensor Pipe 2”","description":"\u003cp\u003eMK3 Intake VW TDI Air Temperature Sensor Pipe 2”\u003c\/p\u003e\n\u003cp\u003eThis intake pipe is designed to house the VW TDI intake air temperature sensor (G72) and install directly into 2” (51 mm) intercooler piping between the intercooler and intake manifold.\u003c\/p\u003e\n\u003cp\u003eOriginally developed for a Vanagon TDI conversion using a 1998 Jetta TDI engine, this design provides a clean and secure way to integrate the factory temperature sensor into custom intake or intercooler setups.\u003c\/p\u003e\n\u003cp\u003eThe pipe features flared ends to help prevent silicone hoses from slipping off under boost.\u003c\/p\u003e\n\u003cp\u003eMaterial \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003eManufactured from ASA plastic\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for engine bay and intake environments\u003c\/p\u003e\n\u003cp\u003eResistant to heat, vibration, and long-term automotive use\u003c\/p\u003e\n\u003cp\u003eThis part is 3D printed, so minor layer lines or surface marks may be present.\u003cbr\u003eThese are normal and do not affect fit or functionality.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eFits VW TDI G72 intake air temperature sensor\u003c\/p\u003e\n\u003cp\u003eDesigned for 2” (51 mm) intake \/ intercooler piping\u003c\/p\u003e\n\u003cp\u003eFlared hose ends for secure hose retention\u003c\/p\u003e\n\u003cp\u003eCompact, simple design for custom builds and swaps\u003c\/p\u003e\n\u003cp\u003eSuitable for diesel and turbocharged applications\u003c\/p\u003e\n\u003cp\u003eFitment\u003c\/p\u003e\n\u003cp\u003eVW MK3 TDI\u003c\/p\u003e\n\u003cp\u003eVanagon TDI conversions\u003c\/p\u003e\n\u003cp\u003eOther VW TDI setups using G72 sensor and 2” piping\u003c\/p\u003e\n\u003cp\u003e⚠️ Fitment depends on your specific setup. Please verify hose size and sensor type before ordering.\u003c\/p\u003e\n\u003cp\u003eImportant Notes\u003c\/p\u003e\n\u003cp\u003eSensor, hoses, clamps, and vehicle components are not included\u003c\/p\u003e\n\u003cp\u003eNo performance or power gains are claimed\u003c\/p\u003e\n\u003cp\u003eIncluded\u003c\/p\u003e\n\u003cp\u003e1× intake pipe with G72 sensor port\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56909136920959,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/mi4_238138cf-fc9b-4b07-9fb2-71e818d94b9b.png?v=1770397695"},{"product_id":"audi-rs3-tt-rs-intake-filter-adapter","title":"Audi RS3 \/ TT RS Intake Filter Adapter","description":"\u003cp\u003eAudi RS3 \/ TT RS Intake Filter Adapter\u003c\/p\u003e\n\u003cp\u003eCustom intake filter adapter designed for Audi RS3 (8V \/ 8V2) and Audi TT RS (8S), compatible with APR turbo inlet systems.\u003c\/p\u003e\n\u003cp\u003eThis part allows installation of a performance intake filter while maintaining proper alignment and clearance in the engine bay.\u003c\/p\u003e\n\u003cp\u003e✅ Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003eMaterial: ASA (Automotive-grade thermoplastic)\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for engine bay use\u003c\/p\u003e\n\u003cp\u003eExcellent resistance to:\u003c\/p\u003e\n\u003cp\u003eHeat\u003c\/p\u003e\n\u003cp\u003eOil vapors\u003c\/p\u003e\n\u003cp\u003eFuel fumes\u003c\/p\u003e\n\u003cp\u003eMoisture and UV exposure\u003c\/p\u003e\n\u003cp\u003eASA is commonly used for OEM exterior and under-hood components and is well suited for long-term automotive applications.\u003c\/p\u003e\n\u003cp\u003e🔥 Heat Resistance (ASA)\u003c\/p\u003e\n\u003cp\u003eContinuous operating temperature: ~100–105°C\u003c\/p\u003e\n\u003cp\u003eShort-term peaks: up to ~115–120°C\u003c\/p\u003e\n\u003cp\u003eSuitable for intake-side engine bay locations when installed as intended\u003c\/p\u003e\n\u003cp\u003e✅ Design Version\u003c\/p\u003e\n\u003cp\u003eOptimized wall thickness for ASA\u003c\/p\u003e\n\u003cp\u003eNot a thin-shell decorative part — built for durability\u003c\/p\u003e\n\u003cp\u003e✅ Features\u003c\/p\u003e\n\u003cp\u003eDesigned to mate with APR turbo inlet systems\u003c\/p\u003e\n\u003cp\u003eSmooth internal airflow path\u003c\/p\u003e\n\u003cp\u003eProper wall thickness for strength and heat stability\u003c\/p\u003e\n\u003cp\u003eClean OEM-style fitment\u003c\/p\u003e\n\u003cp\u003eSuitable for performance street setups\u003c\/p\u003e\n\u003cp\u003e⚠️ This product does not claim horsepower gains.\u003cbr\u003eIts purpose is fitment, airflow routing, and intake system compatibility.\u003c\/p\u003e\n\u003cp\u003e🚗 Fitment\u003c\/p\u003e\n\u003cp\u003eAudi RS3 (8V \/ 8V2)\u003c\/p\u003e\n\u003cp\u003eAudi TT RS (8S)\u003c\/p\u003e\n\u003cp\u003eCompatibility: APR Turbocharger Inlet System\u003cbr\u003e(Other setups not guaranteed)\u003c\/p\u003e\n\u003cp\u003e🖨 3D Printing Disclaimer (Must Read)\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed automotive part:\u003c\/p\u003e\n\u003cp\u003eMinor layer lines or surface marks may be visible\u003c\/p\u003e\n\u003cp\u003eThese do not affect strength or function\u003c\/p\u003e\n\u003cp\u003eFor a perfect cosmetic finish, light sanding or coating is optional\u003c\/p\u003e\n\u003cp\u003eThis approach allows strong, functional parts while keeping production precise and flexible.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Intake Filter Adapter\u003c\/p\u003e\n\u003cp\u003eNo clamps, filters, or additional hardware included unless stated otherwise.\u003c\/p\u003e\n\u003cp\u003e⚠️ Legal \/ Use Notice\u003c\/p\u003e\n\u003cp\u003eOff-road \/ motorsport \/ enthusiast use\u003c\/p\u003e\n\u003cp\u003eBuyer is responsible for verifying compatibility with their specific setup\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56910656471423,"sku":null,"price":95.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/rs4.png?v=1770407878"},{"product_id":"honda-prelude-3rd-gen-headlight-cold-air-intake-redirect","title":"Honda Prelude 3rd Gen Headlight Cold Air Intake Redirect","description":"\u003cp\u003eHonda Prelude 3rd Gen Headlight Cold Air Intake Redirect\u003c\/p\u003e\n\u003cp\u003eUpgrade your intake airflow by redirecting fresh cold air from the headlight area directly toward your aftermarket air filter. This intake redirect is designed to capture air that would normally be lost into the OEM intake path and guide it efficiently to a custom cold air intake setup.\u003c\/p\u003e\n\u003cp\u003eA simple and effective solution for cleaner airflow routing in the engine bay.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Honda Prelude 3rd Generation\u003c\/p\u003e\n\u003cp\u003eRedirects cold air from headlight area toward aftermarket intake filter\u003c\/p\u003e\n\u003cp\u003eImproves airflow efficiency for cold air intake setups\u003c\/p\u003e\n\u003cp\u003eOEM-style shape for clean and purposeful fit\u003c\/p\u003e\n\u003cp\u003eLightweight yet rigid construction\u003c\/p\u003e\n\u003cp\u003eNo permanent vehicle modifications required\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003c\/p\u003e\n\u003cp\u003eHonda Prelude 3rd Generation (BA4 \/ BA5)\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eInstalls in the headlight intake area\u003c\/p\u003e\n\u003cp\u003eDesigned to guide airflow toward an aftermarket cone filter\u003c\/p\u003e\n\u003cp\u003eWorks with custom or modified intake piping\u003c\/p\u003e\n\u003cp\u003eHardware not included\u003c\/p\u003e\n\u003cp\u003eIntended for off-road \/ motorsport use\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay temperatures\u003c\/p\u003e\n\u003cp\u003eUV-stable – ideal for long-term use\u003c\/p\u003e\n\u003cp\u003eStrong, rigid, and deformation-resistant\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Headlight Cold Air Intake Redirect (single piece)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56910794752383,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/hp4.png?v=1770409260"},{"product_id":"vw-1-0-1-5-tsi-custom-intake-kit-turbo-air-filter-mount-system","title":"VW 1.0-1.5 TSI Custom Intake Kit – Turbo Air Filter \u0026 Mount System","description":"\u003cp\u003eVW 1.0-1.5 TSI Custom Intake Kit – Turbo Air Filter \u0026amp; Mount System\u003c\/p\u003e\n\u003cp\u003eUpgrade your factory intake system with this custom-designed intake solution for VW 1.0 and 1.5 TSI turbocharged engines. This kit is designed as a clean aftermarket alternative where off-the-shelf solutions are limited or poorly fitting.\u003c\/p\u003e\n\u003cp\u003eThe intake redirects airflow efficiently to an aftermarket cone filter while maintaining stability and proper mounting inside the engine bay.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for VW 1.0 \u0026amp; 1.5 TSI turbo engines\u003c\/p\u003e\n\u003cp\u003eImproved airflow routing compared to stock intake layout\u003c\/p\u003e\n\u003cp\u003eSupports aftermarket cone-style air filters\u003c\/p\u003e\n\u003cp\u003eCompact and efficient intake duct design\u003c\/p\u003e\n\u003cp\u003eReinforced mounting solution for added stability\u003c\/p\u003e\n\u003cp\u003eOEM-inspired shape for clean engine bay integration\u003c\/p\u003e\n\u003cp\u003eNo cutting or permanent vehicle modifications required\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eEngine compatibility:\u003c\/p\u003e\n\u003cp\u003eVW 1.0 TSI (95 hp \/ 110 hp)\u003c\/p\u003e\n\u003cp\u003eVW 1.5 TSI (150 hp)\u003c\/p\u003e\n\u003cp\u003eEngine codes:\u003c\/p\u003e\n\u003cp\u003eDLAA \/ DLAB \/ DLAC\u003c\/p\u003e\n\u003cp\u003eDADA \/ DPCA\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eReplaces the factory air intake path\u003c\/p\u003e\n\u003cp\u003eMounts using M3 threaded rods and nuts (not included)\u003c\/p\u003e\n\u003cp\u003eAll metal shavings must be fully removed after drilling\u003c\/p\u003e\n\u003cp\u003eDesigned for use with aftermarket air filters\u003c\/p\u003e\n\u003cp\u003eAdditional top support (MAHLE-style mount) is recommended for maximum rigidity\u003c\/p\u003e\n\u003cp\u003eHardware not included\u003c\/p\u003e\n\u003cp\u003e⚠️ Motorsport \/ off-road use only.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHigh heat resistance – suitable for engine bay temperatures\u003c\/p\u003e\n\u003cp\u003eUV-stable for long-term durability\u003c\/p\u003e\n\u003cp\u003eStrong, rigid, and vibration-resistant construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Intake Air Duct\u003c\/p\u003e\n\u003cp\u003e1× Air Filter Mount\u003c\/p\u003e\n\u003cp\u003e1× Reinforced Rear Support Mount\u003c\/p\u003e\n\u003cp\u003e1× Filter Bracket\u003c\/p\u003e\n\u003cp\u003e1× Drill Template\u003c\/p\u003e\n\u003cp\u003e(Complete intake mounting solution – air filter not included)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56911479538047,"sku":null,"price":150.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/vw13.png?v=1770417565"},{"product_id":"honda-civic-type-r-fn2-maf-housing-adapter-stock-airpipe-fitment","title":"Honda Civic Type R FN2 MAF Housing Adapter – Stock Airpipe Fitment","description":"\u003cp\u003eHonda Civic Type R FN2 MAF Housing Adapter – Stock Airpipe Fitment\u003c\/p\u003e\n\u003cp\u003eUpgrade your Honda Civic Type R FN2 intake system with a precision-fit MAF housing designed to work with the stock air pipe configuration.\u003c\/p\u003e\n\u003cp\u003eThis housing provides secure MAF sensor positioning and a clean, OEM-style appearance while maintaining stable airflow conditions inside the intake system.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the Honda Civic FN2 platform.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Honda Civic Type R FN2\u003c\/p\u003e\n\u003cp\u003eCompatible with stock air pipe layout\u003c\/p\u003e\n\u003cp\u003ePrecision MAF sensor mounting flange\u003c\/p\u003e\n\u003cp\u003eReinforced sensor area for long-term stability\u003c\/p\u003e\n\u003cp\u003eClean cylindrical OEM-style design\u003c\/p\u003e\n\u003cp\u003eSuitable for naturally aspirated and turbo setups\u003c\/p\u003e\n\u003cp\u003eNo horsepower gains are claimed.\u003cbr\u003eThis product ensures correct sensor placement and stable intake configuration.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Construction – ASA (Automotive Grade)\u003c\/p\u003e\n\u003cp\u003eManufactured exclusively from high-quality ASA plastic, chosen specifically for automotive engine bay applications.\u003c\/p\u003e\n\u003cp\u003eWhy ASA?\u003c\/p\u003e\n\u003cp\u003eExcellent UV resistance\u003c\/p\u003e\n\u003cp\u003eHigh heat resistance\u003c\/p\u003e\n\u003cp\u003eStrong resistance to warping and cracking\u003c\/p\u003e\n\u003cp\u003eStable under long-term temperature cycling\u003c\/p\u003e\n\u003cp\u003eThermal Performance\u003c\/p\u003e\n\u003cp\u003eContinuous operating temperature: ~100–105°C\u003c\/p\u003e\n\u003cp\u003eShort-term exposure: up to ~115–120°C\u003c\/p\u003e\n\u003cp\u003eDesigned for installation on the intake side of the engine bay.\u003c\/p\u003e\n\u003cp\u003ePrint Construction\u003c\/p\u003e\n\u003cp\u003eThick wall construction\u003c\/p\u003e\n\u003cp\u003eReinforced mounting flange\u003c\/p\u003e\n\u003cp\u003eDense, rigid structure\u003c\/p\u003e\n\u003cp\u003eEngine-bay-ready durability\u003c\/p\u003e\n\u003cp\u003eMinor layer lines may be visible due to the 3D printing process.\u003cbr\u003eThese do not affect structural integrity or functionality.\u003c\/p\u003e\n\u003cp\u003e🔥 Optional Additional Protection\u003c\/p\u003e\n\u003cp\u003eFor high-performance or turbocharged setups, additional heat protection is recommended:\u003c\/p\u003e\n\u003cp\u003eHeat reflective foil\u003c\/p\u003e\n\u003cp\u003eThermal barrier material\u003c\/p\u003e\n\u003cp\u003eProtective coating\u003c\/p\u003e\n\u003cp\u003eThis is advised if the housing is positioned near strong radiant heat sources.\u003c\/p\u003e\n\u003cp\u003e🔧 Vehicle Fitment\u003c\/p\u003e\n\u003cp\u003eHonda Civic Type R FN2\u003c\/p\u003e\n\u003cp\u003eDesigned to work with stock air pipe configuration.\u003cbr\u003ePlease verify your intake setup before ordering.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Honda Civic FN2 MAF Housing (ASA)\u003c\/p\u003e\n\u003cp\u003eMAF sensor, gasket, hardware, intake filter and intake piping are not included.\u003c\/p\u003e\n\u003cp\u003e⚠ Important Notes\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed aftermarket part\u003c\/p\u003e\n\u003cp\u003eNot an OEM Honda product\u003c\/p\u003e\n\u003cp\u003eProfessional installation recommended\u003c\/p\u003e\n\u003cp\u003ePlease confirm compatibility before purchase\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56958184128895,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/hc4_98f0cacc-86a3-42ea-91bc-a8b606e40797.png?v=1771087361"},{"product_id":"mazda-mps-maf-housing-intake-air-flow-sensor-adapter","title":"Mazda MPS MAF Housing – Intake Air Flow Sensor Adapter","description":"\u003cp\u003eMazda MPS MAF Housing – Intake Air Flow Sensor Adapter\u003c\/p\u003e\n\u003cp\u003eUpgrade or replace your factory MAF housing with this precision-designed intake adapter for Mazda MPS. Designed to maintain proper airflow while securely mounting the mass air flow (MAF) sensor in a clean OEM-style configuration.\u003c\/p\u003e\n\u003cp\u003eIdeal for custom intake setups, performance builds, or replacement of damaged factory units.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Mazda MPS models\u003cbr\u003eMAF sensor mounting provision integrated\u003cbr\u003eSmooth internal airflow path\u003cbr\u003eOEM-style cylindrical design\u003cbr\u003eClean fit for custom intake piping\u003cbr\u003eStrong and heat-resistant construction\u003cbr\u003eNo permanent modifications required (depending on setup)\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eMazda 3 MPS\u003cbr\u003eMazda 6 MPS (verify before ordering)\u003c\/p\u003e\n\u003cp\u003eApplication:\u003cbr\u003eMass Air Flow (MAF) housing\u003cbr\u003eCustom intake systems\u003cbr\u003ePerformance air intake builds\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eDesigned to accept factory-style MAF sensor\u003cbr\u003eEnsure correct orientation of airflow direction\u003cbr\u003eProfessional installation recommended for tuned vehicles\u003cbr\u003eAlways verify compatibility before purchase\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for engine bay temperatures\u003cbr\u003eUV-stable – ideal for long-term use\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Mazda MPS MAF Housing\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56958312219007,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/mm1.png?v=1771088191"},{"product_id":"bmw-f20-120i-135i-maf-housing-intake-air-flow-sensor-adapter","title":"BMW F20 120i \u0026 135i MAF Housing – Intake Air Flow Sensor Adapter","description":"\u003cp\u003eBMW F20 120i \u0026amp; 135i MAF Housing – Intake Air Flow Sensor Adapter\u003c\/p\u003e\n\u003cp\u003eUpgrade or replace your factory MAF housing with this precision-designed intake adapter for BMW F20 models. Designed to maintain smooth airflow while securely mounting the Mass Air Flow (MAF) sensor in an OEM-style configuration.\u003c\/p\u003e\n\u003cp\u003ePerfect for custom intake setups, cone filter conversions, or performance builds.\u003c\/p\u003e\n\u003cp\u003eAvailable in two versions:\u003cbr\u003e• BMW F20 120i\u003cbr\u003e• BMW F20 135i\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for BMW F20 platform\u003cbr\u003eTwo versions available (120i \u0026amp; 135i)\u003cbr\u003eIntegrated MAF sensor mounting provision\u003cbr\u003eSmooth internal airflow path\u003cbr\u003eOEM-style cylindrical design\u003cbr\u003eSuitable for custom intake or cone filter setups\u003cbr\u003eStrong and heat-resistant construction\u003cbr\u003eNo permanent vehicle modification required (depending on setup)\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eBMW F20 120i\u003cbr\u003eBMW F20 135i\u003c\/p\u003e\n\u003cp\u003eApplication:\u003cbr\u003eMass Air Flow (MAF) housing\u003cbr\u003eAftermarket intake systems\u003cbr\u003ePerformance air intake builds\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eSelect correct version before ordering\u003cbr\u003eDesigned to accept factory-style MAF sensor\u003cbr\u003eEnsure proper airflow direction during installation\u003cbr\u003eProfessional installation recommended for tuned vehicles\u003cbr\u003eAlways verify compatibility with your engine variant\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for engine bay temperatures\u003cbr\u003eUV-stable – ideal for long-term use\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× BMW F20 MAF Housing (selected version: 120i or 135i)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"120i","offer_id":56958359568767,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"135i","offer_id":56958359601535,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/bf1.png?v=1771089925"},{"product_id":"ford-fiesta-ecoboost-st180-maf-housing-intake-air-flow-sensor-adapter","title":"Ford Fiesta Ecoboost \u0026 ST180 MAF Housing – Intake Air Flow Sensor Adapter","description":"\u003cp\u003eFord Fiesta Ecoboost \u0026amp; ST180 MAF Housing – Intake Air Flow Sensor Adapter\u003c\/p\u003e\n\u003cp\u003eUpgrade or replace your factory MAF housing with this precision-designed intake adapter for Ford Fiesta models. Designed to maintain smooth airflow while securely mounting the Mass Air Flow (MAF) sensor in an OEM-style configuration.\u003c\/p\u003e\n\u003cp\u003eIdeal for custom intake systems, cone filter conversions, or performance builds.\u003c\/p\u003e\n\u003cp\u003eAvailable in two versions:\u003cbr\u003e• Ford Fiesta Ecoboost\u003cbr\u003e• Ford Fiesta ST180\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Ford Fiesta models\u003cbr\u003eTwo versions available (Ecoboost \u0026amp; ST180)\u003cbr\u003eIntegrated MAF sensor mounting provision\u003cbr\u003eSmooth internal airflow path\u003cbr\u003eOEM-style cylindrical design\u003cbr\u003eSuitable for custom intake or cone filter setups\u003cbr\u003eStrong and heat-resistant construction\u003cbr\u003eNo permanent vehicle modification required (depending on setup)\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eFord Fiesta Ecoboost\u003cbr\u003eFord Fiesta ST180\u003c\/p\u003e\n\u003cp\u003eApplication:\u003cbr\u003eMass Air Flow (MAF) housing\u003cbr\u003eAftermarket intake systems\u003cbr\u003ePerformance air intake builds\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003ePlease select correct version before ordering\u003cbr\u003eDesigned to accept factory-style MAF sensor\u003cbr\u003eEnsure correct airflow direction during installation\u003cbr\u003eProfessional installation recommended for tuned vehicles\u003cbr\u003eAlways verify compatibility with your specific engine variant\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for engine bay temperatures\u003cbr\u003eUV-stable – ideal for long-term use\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Ford Fiesta MAF Housing (selected version: Ecoboost or ST180)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Ecoboost","offer_id":56959080464767,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"ST180","offer_id":56959080497535,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/ff4_d2e0aa48-c513-4171-b373-a4061f2f2e80.png?v=1771101322"},{"product_id":"opel-vauxhall-performance-maf-housing-multiple-versions-available","title":"Opel \/ Vauxhall Performance MAF Housing – Multiple Versions Available","description":"\u003cp\u003eOpel \/ Vauxhall Performance MAF Housing – Multiple Versions Available\u003c\/p\u003e\n\u003cp\u003eUpgrade your intake system with this custom MAF housing designed for performance builds and big turbo setups. Engineered to provide smooth airflow and secure mounting for the factory-style MAF sensor.\u003c\/p\u003e\n\u003cp\u003eIdeal for modified and high-performance applications.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eMultiple versions available (see dropdown selection)\u003cbr\u003eDesigned for performance and turbo builds\u003cbr\u003eIntegrated MAF sensor mounting provision\u003cbr\u003eSmooth internal airflow path\u003cbr\u003eSuitable for custom intake systems\u003cbr\u003eStrong and heat-resistant construction\u003cbr\u003eOEM-style sensor positioning\u003c\/p\u003e\n\u003cp\u003e🔧 Available Versions (Select from Dropdown)\u003c\/p\u003e\n\u003cp\u003e• Astra H OPC \/ VXR – 100mm Straight (Big Turbo)\u003cbr\u003e• Astra J OPC \/ VXR – Velocity Stack\u003cbr\u003e• Astra H OPC – 80mm Velocity\u003cbr\u003e• Corsa D – Stock Velocity\u003cbr\u003e• 90mm to 100mm Cone Adapter\u003c\/p\u003e\n\u003cp\u003ePlease carefully select the correct version before ordering.\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eDesigned for factory-style MAF sensor\u003cbr\u003eProfessional installation recommended for tuned vehicles\u003cbr\u003eAlways verify compatibility with your specific engine setup\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for engine bay temperatures\u003cbr\u003eUV-stable – ideal for long-term use\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× MAF Housing (selected version from dropdown)\u003c\/p\u003e\n\u003cp\u003eMAF sensor and hardware not included.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Astra H OPC \/ VXR","offer_id":56959305515391,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true},{"title":"Astra J OPC \/ VXR","offer_id":56959305548159,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"Astra H OPC","offer_id":56959305580927,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true},{"title":"Corsa D","offer_id":56959305613695,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":true},{"title":"90mm to 100mm Cone","offer_id":56959305646463,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/Astra_H_OPC_80.png?v=1771103535"},{"product_id":"mazda-cx-5-skyactiv-2-5-maf-housing-diy-intake-upgrade","title":"Mazda CX-5 Skyactiv 2.5 MAF Housing – DIY Intake Upgrade","description":"\u003cp\u003eMazda CX-5 Skyactiv 2.5 MAF Housing – DIY Intake Upgrade\u003c\/p\u003e\n\u003cp\u003eUpgrade your intake system with this custom MAF housing designed for Mazda CX-5 Skyactiv 2.5 models. Based on the factory airbox design, this housing allows you to build a clean and functional DIY intake setup while maintaining proper MAF sensor positioning.\u003c\/p\u003e\n\u003cp\u003ePerfect for custom intake builds and performance-oriented setups.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Mazda CX-5 Skyactiv 2.5\u003cbr\u003eBased on factory MAF housing dimensions\u003cbr\u003eOptimized airflow path\u003cbr\u003eIntegrated MAF sensor mounting provision\u003cbr\u003eRevised and corrected dimensions\u003cbr\u003eReinforced bottom support for secure plate mounting\u003cbr\u003eIdeal for DIY intake conversions\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eMazda CX-5 Skyactiv 2.5\u003c\/p\u003e\n\u003cp\u003eApplication:\u003cbr\u003eDIY intake builds\u003cbr\u003eCustom cone filter setups\u003cbr\u003eReplacement or modified intake systems\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eDesigned to accept factory-style MAF sensor\u003cbr\u003eProfessional installation recommended\u003cbr\u003eAlways verify compatibility with your specific engine setup\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for engine bay temperatures\u003cbr\u003eUV-stable – ideal for long-term use\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Mazda CX-5 MAF Housing\u003c\/p\u003e\n\u003cp\u003eMAF sensor and hardware not included.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56959514673535,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/cx2.png?v=1771105824"},{"product_id":"volvo-240-740-maf-delete-map-conversion-intake-adapter","title":"Volvo 240 \/ 740 MAF Delete – MAP Conversion Intake Adapter","description":"\u003cp\u003eVolvo 240 \/ 740 MAF Delete Dummy Tube – MAP Conversion Intake Adapter\u003c\/p\u003e\n\u003cp\u003eThis MAF delete is designed for Volvo 240 and 740 models running MAP-based engine management instead of the factory MAF system.\u003c\/p\u003e\n\u003cp\u003ePerfect for standalone ECU setups or modified engines where the original MAF sensor is removed but the factory intake tubing is retained.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Volvo 240 and Volvo 740\u003cbr\u003eMAF delete solution for MAP-based setups\u003cbr\u003eMaintains factory intake tubing layout\u003cbr\u003eClean straight-through airflow design\u003cbr\u003eIdeal for standalone ECU conversions\u003cbr\u003eStrong and heat-resistant construction\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eVolvo 240\u003cbr\u003eVolvo 740\u003c\/p\u003e\n\u003cp\u003eApplication:\u003cbr\u003eMAF delete setups\u003cbr\u003eStandalone ECU builds\u003cbr\u003eMAP sensor conversions\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eReplaces factory MAF housing\u003cbr\u003eDesigned to work with original intake piping\u003cbr\u003eEnsure proper tuning before operating vehicle\u003cbr\u003eProfessional installation recommended\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for engine bay temperatures\u003cbr\u003eUV-stable – ideal for long-term use\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Volvo MAF Delete Dummy Tube\u003c\/p\u003e\n\u003cp\u003eMAF sensor not included.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56959716852095,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/v1_bfb2a60b-8a93-4ba2-8017-b5d92eb55495.png?v=1771106563"},{"product_id":"mini-cooper-mpi-airbox-induction-insert-bolt-on-upgrade","title":"Mini Cooper MPI Airbox Induction Insert – Bolt-On Upgrade","description":"\u003cp\u003eMini Cooper MPI Airbox Induction Insert – Bolt-On Upgrade\u003c\/p\u003e\n\u003cp\u003eUpgrade your Mini Cooper MPI intake system with this slip-on airbox induction insert designed to fit the original factory airbox without permanent modifications.\u003c\/p\u003e\n\u003cp\u003eThis component installs directly onto the OEM MPI airbox and enhances airflow characteristics while maintaining a clean factory-style engine bay appearance.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Mini Cooper MPI models\u003c\/p\u003e\n\u003cp\u003eFits original OEM MPI airbox\u003c\/p\u003e\n\u003cp\u003eSlip-on installation\u003c\/p\u003e\n\u003cp\u003eNo drilling or permanent modifications required\u003c\/p\u003e\n\u003cp\u003eImproves intake airflow characteristics\u003c\/p\u003e\n\u003cp\u003eSubtle enhancement in intake sound\u003c\/p\u003e\n\u003cp\u003eClean OEM-style fitment\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eMini Cooper MPI (classic models with factory MPI airbox)\u003c\/p\u003e\n\u003cp\u003eInstallation details:\u003c\/p\u003e\n\u003cp\u003eSlips directly onto the original airbox\u003c\/p\u003e\n\u003cp\u003eNo cutting or drilling required\u003c\/p\u003e\n\u003cp\u003eDesigned for secure fitment\u003c\/p\u003e\n\u003cp\u003eDirect bolt-on style upgrade\u003c\/p\u003e\n\u003cp\u003eProfessional installation recommended if you are unfamiliar with engine bay components.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only (upgraded from original ABS recommendation)\u003c\/p\u003e\n\u003cp\u003eHigh heat resistance – suitable for engine bay temperatures\u003c\/p\u003e\n\u003cp\u003eUV-stable material\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for under-hood automotive use\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional finishing or coating is recommended for a refined appearance.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× MPI Airbox Induction Insert\u003c\/p\u003e\n\u003cp\u003e(OEM airbox and engine components not included)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57044709081471,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/il_fullxfull.7743329432_57sn.avif?v=1772296219"},{"product_id":"ford-fiesta-st150-cold-air-intake-box-kit","title":"Ford Fiesta ST150 Cold Air Intake Box Kit","description":"\u003cp\u003eFord Fiesta ST150 Cold Air Intake Box Kit\u003c\/p\u003e\n\u003cp\u003eUpgrade your Ford Fiesta ST150 with this custom cold air intake box kit, designed for performance intake builds where the original battery has been relocated from the engine bay. This is a large multi-piece printed airbox setup made for custom 70 mm intake layouts, giving you a cleaner way to build a cold air feed system in the ST150 engine bay.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed for serious custom builds, track-style setups, and owners who want a proper enclosed intake box solution instead of a simple open cone filter.\u003c\/p\u003e\n\u003cp\u003eImportant: the intake box must be protected with thermal foil \/ heat reflective tape before use. The part is installed in the engine bay near heat sources, so proper heat protection is required for long-term durability.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Ford Fiesta ST150\u003c\/p\u003e\n\u003cp\u003eCustom cold air intake box kit\u003c\/p\u003e\n\u003cp\u003eLarge multi-piece airbox design\u003c\/p\u003e\n\u003cp\u003eDesigned for 70 mm intake pipe layouts\u003c\/p\u003e\n\u003cp\u003eSuitable for builds with battery relocation\u003c\/p\u003e\n\u003cp\u003eHelps create a cleaner enclosed intake setup\u003c\/p\u003e\n\u003cp\u003eSide inlet allows connection of a cold air feed\u003c\/p\u003e\n\u003cp\u003eModular design for easier printing, assembly, and installation\u003c\/p\u003e\n\u003cp\u003eUseful for custom intake, performance, and track-style builds\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA for improved heat resistance compared to common PLA-style materials\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eMain compatibility:\u003c\/p\u003e\n\u003cp\u003eFord Fiesta ST150\u003c\/p\u003e\n\u003cp\u003eEngine:\u003c\/p\u003e\n\u003cp\u003e2.0 petrol ST150\u003c\/p\u003e\n\u003cp\u003eImportant installation requirement:\u003c\/p\u003e\n\u003cp\u003eBattery relocation is required\u003c\/p\u003e\n\u003cp\u003eThis kit is designed for cars where the battery has been relocated to the boot \/ trunk\u003c\/p\u003e\n\u003cp\u003eIt will not fit correctly with the factory battery still in the original engine bay position\u003c\/p\u003e\n\u003cp\u003eIntake setup notes:\u003c\/p\u003e\n\u003cp\u003eDesigned around a 70 mm intake layout\u003c\/p\u003e\n\u003cp\u003eSuitable for use with 70 mm OD aluminium connector pieces\u003c\/p\u003e\n\u003cp\u003eCan be used with silicone intake hose bends such as 30 degree and 90 degree bends, trimmed to suit your setup\u003c\/p\u003e\n\u003cp\u003eA suitable air filter is required inside the box\u003c\/p\u003e\n\u003cp\u003eA cold air feed can be connected to the side inlet\u003c\/p\u003e\n\u003cp\u003eHeat protection requirement:\u003c\/p\u003e\n\u003cp\u003eThe printed intake box must be wrapped or protected with thermal foil, heat reflective tape, or similar heat shielding before installation\u003c\/p\u003e\n\u003cp\u003eDo not use the printed box bare in the engine bay without heat protection\u003c\/p\u003e\n\u003cp\u003eHeat shielding helps protect the part from engine bay temperatures and improves long-term durability\u003c\/p\u003e\n\u003cp\u003eHardware required:\u003c\/p\u003e\n\u003cp\u003eM6 nuts\u003c\/p\u003e\n\u003cp\u003eM6 bolts\u003c\/p\u003e\n\u003cp\u003eM6 washers\u003c\/p\u003e\n\u003cp\u003eHose clamps or suitable fasteners for intake hose connections\u003c\/p\u003e\n\u003cp\u003eImportant fitment note:\u003c\/p\u003e\n\u003cp\u003eThis is not a complete ready-to-install intake kit\u003c\/p\u003e\n\u003cp\u003eThis listing is for the printed airbox parts only\u003c\/p\u003e\n\u003cp\u003eAir filter, silicone hoses, aluminium connectors, hose clamps, M6 hardware, thermal foil, and mounting hardware are not included unless specifically selected\u003c\/p\u003e\n\u003cp\u003eThis setup may require trimming, test fitting, adjustment, and custom installation work\u003c\/p\u003e\n\u003cp\u003eThe box does not include fixed mounting brackets and is normally held securely in place by the intake hose connections and clamps\u003c\/p\u003e\n\u003cp\u003eInstallation should be carried out by someone who understands custom intake fitting, engine bay clearance, and safe routing of intake parts\u003c\/p\u003e\n\u003cp\u003eAlways check clearance from hot, moving, and electrical components before use\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eLarge 3D-printed multi-piece kit\u003c\/p\u003e\n\u003cp\u003eHeat-resistant compared to standard PLA-style materials\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eSuitable for custom automotive use when properly installed and heat protected\u003c\/p\u003e\n\u003cp\u003eThermal foil \/ heat reflective tape is required for engine bay use\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Cold Air Intake Box Main Body\u003c\/p\u003e\n\u003cp\u003e1× Intake Box Cover \/ End Plate\u003c\/p\u003e\n\u003cp\u003e1× Inlet Adapter Section\u003c\/p\u003e\n\u003cp\u003e1× Side Air Feed \/ Duct Adapter\u003c\/p\u003e\n\u003cp\u003ePrinted intake box parts only\u003c\/p\u003e\n\u003cp\u003eAttribution:\u003c\/p\u003e\n\u003cp\u003eBased on the original design “ST150 Cold Air Intake” by Jmarriott03.\u003c\/p\u003e\n\u003cp\u003eGreat design — thank you for sharing it with the community.\u003c\/p\u003e\n\u003cp\u003eAll design credit goes to the original designer.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57809906368895,"sku":null,"price":200.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/st8.png?v=1782075767"},{"product_id":"audi-8v-intake-air-scoop-pair-short-or-extended-airbox-scoop-set","title":"Audi 8V Intake Air Scoop Pair – Short or Extended Airbox Scoop Set","description":"\u003cp\u003eAudi 8V Intake Air Scoop Pair – Short or Extended Airbox Scoop Set\u003c\/p\u003e\n\u003cp\u003eUpgrade airflow to your intake with this pair of intake air scoops designed for Audi 8V models. This set includes both left and right side scoops and is designed to help direct more air toward the intake \/ airbox area.\u003c\/p\u003e\n\u003cp\u003eThe scoops were designed around the Audi S3 8V and may also fit other Audi 8V models from approximately 2015–2020. Please compare your mounting area before ordering.\u003c\/p\u003e\n\u003cp\u003eAvailable in two versions:\u003c\/p\u003e\n\u003cp\u003eShort\u003c\/p\u003e\n\u003cp\u003eExtended\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Audi 8V intake airflow improvement\u003c\/p\u003e\n\u003cp\u003eSold as a pair – left and right side\u003c\/p\u003e\n\u003cp\u003eModeled around the Audi S3 8V\u003c\/p\u003e\n\u003cp\u003eMay fit other Audi 8V models\u003c\/p\u003e\n\u003cp\u003eHelps direct more air toward the intake \/ airbox area\u003c\/p\u003e\n\u003cp\u003eAvailable in Short or Extended version\u003c\/p\u003e\n\u003cp\u003eExtended version provides a larger scoop profile\u003c\/p\u003e\n\u003cp\u003eClean bolt-on style upgrade\u003c\/p\u003e\n\u003cp\u003eSuitable for custom intake and airflow setups\u003c\/p\u003e\n\u003cp\u003eStrong and durable construction\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eMain compatibility:\u003c\/p\u003e\n\u003cp\u003eAudi S3 8V\u003c\/p\u003e\n\u003cp\u003ePossible additional compatibility:\u003c\/p\u003e\n\u003cp\u003eMay fit other Audi 8V models from approximately 2015–2020\u003c\/p\u003e\n\u003cp\u003eImportant fitment note:\u003c\/p\u003e\n\u003cp\u003eThis scoop set was designed around the Audi S3 8V\u003c\/p\u003e\n\u003cp\u003eFitment with other Audi 8V models is not guaranteed\u003c\/p\u003e\n\u003cp\u003ePlease compare your mounting area and available clearance before ordering\u003c\/p\u003e\n\u003cp\u003eVersion options and approximate dimensions:\u003c\/p\u003e\n\u003cp\u003eShort version:\u003c\/p\u003e\n\u003cp\u003eDriver side: approx. 74.3 × 109.1 × 235 mm\u003c\/p\u003e\n\u003cp\u003ePassenger side: approx. 68.0 × 114.3 × 175 mm\u003c\/p\u003e\n\u003cp\u003eExtended version:\u003c\/p\u003e\n\u003cp\u003eDriver side: approx. 129.5 × 125.4 × 235 mm\u003c\/p\u003e\n\u003cp\u003ePassenger side: approx. 129.2 × 125.5 × 175 mm\u003c\/p\u003e\n\u003cp\u003eSide note:\u003c\/p\u003e\n\u003cp\u003eThe set includes two side-specific scoops. Driver \/ passenger naming may vary depending on vehicle market, but the kit includes both sides.\u003c\/p\u003e\n\u003cp\u003eHardware notes:\u003c\/p\u003e\n\u003cp\u003eMounting holes are sized for M5 bolts\u003c\/p\u003e\n\u003cp\u003eCan be installed using #10 x 1 inch self-tapping screws\u003c\/p\u003e\n\u003cp\u003eM5 rivet nuts are recommended for a more secure installation\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eTest fit both scoops before final installation\u003c\/p\u003e\n\u003cp\u003eMake sure there is enough clearance around the intake \/ airbox area\u003c\/p\u003e\n\u003cp\u003eInstall left and right scoops in the correct orientation\u003c\/p\u003e\n\u003cp\u003eInstallation should be carried out by someone who understands how to fit and align the parts correctly\u003c\/p\u003e\n\u003cp\u003eThis listing is for the printed scoop pair only\u003c\/p\u003e\n\u003cp\u003eBolts, rivet nuts, screws, and any additional hardware are not included unless specifically stated\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay use\u003c\/p\u003e\n\u003cp\u003eUV-stable – ideal for long-term use\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for custom automotive use\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Intake Air Scoops\u003c\/p\u003e\n\u003cp\u003eComplete pair – left and right side\u003c\/p\u003e\n\u003cp\u003eSelected version:\u003c\/p\u003e\n\u003cp\u003eShort\u003c\/p\u003e\n\u003cp\u003eExtended\u003c\/p\u003e\n\u003cp\u003eAttribution:\u003cbr\u003eOriginal design by emajose96.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Black \/ Short","offer_id":57810319999359,"sku":null,"price":80.0,"currency_code":"EUR","in_stock":true},{"title":"Black \/ Extended","offer_id":57810320032127,"sku":null,"price":110.0,"currency_code":"EUR","in_stock":true},{"title":"Gray \/ Short","offer_id":57810320064895,"sku":null,"price":80.0,"currency_code":"EUR","in_stock":true},{"title":"Gray \/ Extended","offer_id":57810320097663,"sku":null,"price":110.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/8v7.png?v=1782088183"},{"product_id":"toyota-blade-master-2gr-fe-maf-intake-tube-for-76mm-pod-filter","title":"Toyota Blade Master 2GR FE MAF Intake Tube for 76mm Pod Filter","description":"\u003cp\u003eToyota Blade Master 2GR FE MAF Intake Tube for 76mm Pod Filter\u003c\/p\u003e\n\u003cp\u003eUpgrade the intake setup on your Toyota Blade Master with this 2GR FE pod filter MAF sensor intake tube. This adapter is designed to fit the existing rubber intake tube and allows installation of a standard 76 mm pod filter while keeping the factory MAF sensor in place.\u003c\/p\u003e\n\u003cp\u003eThis is a useful part for custom intake setups where you want to replace the factory airbox with a pod filter style intake while retaining the original MAF sensor.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Toyota Blade Master 2GR FE\u003c\/p\u003e\n\u003cp\u003eFits the existing rubber intake tube\u003c\/p\u003e\n\u003cp\u003eAllows installation of a 76 mm pod filter\u003c\/p\u003e\n\u003cp\u003eIntegrated MAF sensor mounting area\u003c\/p\u003e\n\u003cp\u003eAllows use of the original MAF sensor\u003c\/p\u003e\n\u003cp\u003eOriginal MAF sensor screws can be used\u003c\/p\u003e\n\u003cp\u003eUseful for custom pod filter intake setups\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for engine bay use\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eMain compatibility:\u003c\/p\u003e\n\u003cp\u003eToyota Blade Master\u003c\/p\u003e\n\u003cp\u003e2GR FE engine\u003c\/p\u003e\n\u003cp\u003eIntake compatibility:\u003c\/p\u003e\n\u003cp\u003eDesigned for a standard 76 mm pod filter\u003c\/p\u003e\n\u003cp\u003eFits the existing rubber intake tube on the Toyota Blade Master 2GR FE\u003c\/p\u003e\n\u003cp\u003eMAF sensor notes:\u003c\/p\u003e\n\u003cp\u003eDesigned to allow fitment of the factory MAF sensor\u003c\/p\u003e\n\u003cp\u003eOriginal MAF sensor mounting screws can be used\u003c\/p\u003e\n\u003cp\u003eThe MAF mounting holes may not line up 100 percent perfectly with every sensor, but the fitment is designed to be close enough for installation\u003c\/p\u003e\n\u003cp\u003eImportant fitment note:\u003c\/p\u003e\n\u003cp\u003eThis part was designed for the Toyota Blade Master 2GR FE\u003c\/p\u003e\n\u003cp\u003eFitment with other 2GR FE vehicles is not guaranteed\u003c\/p\u003e\n\u003cp\u003ePlease compare your intake tube, MAF sensor, and filter size before ordering\u003c\/p\u003e\n\u003cp\u003eThis is not a complete intake kit\u003c\/p\u003e\n\u003cp\u003ePod filter, MAF sensor, clamps, hoses, screws, and other hardware are not included unless specifically stated\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eRemove the factory intake section as required\u003c\/p\u003e\n\u003cp\u003eInstall the MAF sensor into the adapter using the original screws\u003c\/p\u003e\n\u003cp\u003eConnect the adapter to the existing rubber intake tube\u003c\/p\u003e\n\u003cp\u003eFit a compatible 76 mm pod filter\u003c\/p\u003e\n\u003cp\u003eCheck all clamps and connections before starting the engine\u003c\/p\u003e\n\u003cp\u003eInstallation should be carried out by someone who understands intake fitting and engine bay clearance\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay use\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for custom automotive intake use\u003c\/p\u003e\n\u003cp\u003eSuitable for engine bay temperatures when properly installed\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× MAF Sensor Intake Tube Adapter\u003c\/p\u003e\n\u003cp\u003ePrinted adapter only\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57814045655423,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/t2.png?v=1782142259"},{"product_id":"mazda-miata-nb1-fog-light-intake-funnel-set-pair-of-2","title":"Mazda Miata NB1 Fog Light Intake Funnel Set – Pair of 2","description":"\u003cp\u003eMazda Miata NB1 Fog Light Intake Funnel Set – Pair of 2\u003c\/p\u003e\n\u003cp\u003eUpgrade the front airflow on your Mazda Miata NB1 with this fog light intake funnel set, designed to replace the original fog lights and route fresh air through the fog light openings. These funnels attach to the factory fog light bracket area and are intended for custom intake, brake cooling, or general airflow projects.\u003c\/p\u003e\n\u003cp\u003ePlease note: this is not a plug-and-play part. Minor trimming, fitting, and adjustment are required during installation. This product is intended for custom intake or cooling airflow setups and should be installed by someone who understands how to route ducting and modify the fender liner area if needed. Read full description please.\u003c\/p\u003e\n\u003cp\u003eSold as a set of 2 pieces.\u003c\/p\u003e\n\u003cp\u003eImportant: this design is for NB1 Miata only and does not fit NB2.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Mazda Miata NB1\u003c\/p\u003e\n\u003cp\u003eDoes not fit NB2\u003c\/p\u003e\n\u003cp\u003eSold as a complete set of 2 pieces\u003c\/p\u003e\n\u003cp\u003eReplaces the factory fog lights with intake funnels\u003c\/p\u003e\n\u003cp\u003eAttaches to the factory fog light bracket area\u003c\/p\u003e\n\u003cp\u003eDesigned for use with 2 inch accordion duct tubing\u003c\/p\u003e\n\u003cp\u003eUseful for custom intake airflow or cooling projects\u003c\/p\u003e\n\u003cp\u003eGood option for track-style or performance-focused builds\u003c\/p\u003e\n\u003cp\u003eStrong and durable construction\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eMain compatibility:\u003c\/p\u003e\n\u003cp\u003eMazda Miata NB1\u003c\/p\u003e\n\u003cp\u003eImportant fitment note:\u003c\/p\u003e\n\u003cp\u003eThis part is designed for NB1 Miata only\u003c\/p\u003e\n\u003cp\u003eDoes not work on NB2\u003c\/p\u003e\n\u003cp\u003eThis is not a plug-and-play installation\u003c\/p\u003e\n\u003cp\u003eMinor trimming, fitting, and adjustment are required\u003c\/p\u003e\n\u003cp\u003ePlease compare your fog light area and factory bracket setup before ordering\u003c\/p\u003e\n\u003cp\u003eFactory fog light brackets are required to install this piece\u003c\/p\u003e\n\u003cp\u003eThis listing is for the printed funnels only\u003c\/p\u003e\n\u003cp\u003eAccordion tubing, brackets, hardware, clamps, and any extra ducting parts are not included unless specifically stated\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eThe funnel secures to the factory bracket that holds the OEM fog light\u003c\/p\u003e\n\u003cp\u003eThe lower securing tabs straddle the bracket\u003c\/p\u003e\n\u003cp\u003eOEM fog light brackets are needed to install the part\u003c\/p\u003e\n\u003cp\u003eRequires 2 inch accordion tube for routing air\u003c\/p\u003e\n\u003cp\u003eThe tube is typically routed in the fender behind the factory liner\u003c\/p\u003e\n\u003cp\u003eTrimming of the upper section of the fender liner is required because a large securing flap can block tube routing\u003c\/p\u003e\n\u003cp\u003eCut the flap at the seam where it extends perpendicular from the liner\u003c\/p\u003e\n\u003cp\u003eInstallation may be possible without removing the bumper or wheel in some cases\u003c\/p\u003e\n\u003cp\u003eTurning the wheel fully can provide more access to route and secure the ducting\u003c\/p\u003e\n\u003cp\u003eA 10 mm flex head ratcheting wrench is recommended for easier installation\u003c\/p\u003e\n\u003cp\u003eTest fit everything before final assembly\u003c\/p\u003e\n\u003cp\u003eInstallation should be carried out by someone who understands custom vehicle fitting and airflow duct routing\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for automotive use\u003c\/p\u003e\n\u003cp\u003eUV-stable – ideal for long-term use\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for custom automotive airflow applications\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Fog Light Intake Funnels\u003c\/p\u003e\n\u003cp\u003eComplete set of 2 pieces\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Gray","offer_id":57814324609407,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":57814324642175,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/nb7.png?v=1782143194"},{"product_id":"holden-rodeo-tf-4ze1-pod-filter-adapter-4-inch-intake-maf-adapter","title":"Holden Rodeo TF 4ZE1 Pod Filter Adapter – 4 Inch Intake MAF Adapter","description":"\u003cp\u003eHolden Rodeo TF 4ZE1 Pod Filter Adapter – 4 Inch Intake MAF Adapter\u003c\/p\u003e\n\u003cp\u003eUpgrade the intake setup on your Holden Rodeo with this pod filter adapter, designed to fit where the stock air intake connects to the MAF sensor tube. This adapter allows installation of a 4 inch \/ 101 mm pod filter while keeping the factory MAF sensor tube layout.\u003c\/p\u003e\n\u003cp\u003eThis part was designed and tested for a 1995 Holden Rodeo TF with the Isuzu 4ZE1 engine. Fitment with other Rodeo or Isuzu 4ZE1 applications may be possible, but is not guaranteed.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Holden Rodeo TF with 4ZE1 engine\u003c\/p\u003e\n\u003cp\u003eAdapts the factory MAF sensor tube to a 4 inch pod filter\u003c\/p\u003e\n\u003cp\u003eSuitable for 101 mm pod filter inlet size\u003c\/p\u003e\n\u003cp\u003eDesigned to bolt where the original air intake connects\u003c\/p\u003e\n\u003cp\u003eAllows custom pod filter intake setup\u003c\/p\u003e\n\u003cp\u003eTwo small auxiliary ports are included but blocked by default\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for engine bay use\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eMain compatibility:\u003c\/p\u003e\n\u003cp\u003e1995 Holden Rodeo TF\u003c\/p\u003e\n\u003cp\u003eIsuzu 4ZE1 engine\u003c\/p\u003e\n\u003cp\u003eTested application:\u003c\/p\u003e\n\u003cp\u003eAustralian delivered Holden Rodeo with 4ZE1 engine\u003c\/p\u003e\n\u003cp\u003ePossible but unconfirmed compatibility:\u003c\/p\u003e\n\u003cp\u003eOther Holden Rodeo models from the same era using the 4ZE1 engine\u003c\/p\u003e\n\u003cp\u003eSome Isuzu vehicles using the 4ZE1 engine\u003c\/p\u003e\n\u003cp\u003ePossible Isuzu Trooper applications from the same era\u003c\/p\u003e\n\u003cp\u003eImportant fitment note:\u003c\/p\u003e\n\u003cp\u003eThis adapter was tested on a 1995 Holden Rodeo TF with 4ZE1 engine only\u003c\/p\u003e\n\u003cp\u003eFitment with other engines, years, or markets is not guaranteed\u003c\/p\u003e\n\u003cp\u003ePlease compare your MAF sensor tube, bolt pattern, and available engine bay space before ordering\u003c\/p\u003e\n\u003cp\u003eThis is not a complete intake kit\u003c\/p\u003e\n\u003cp\u003ePod filter, MAF sensor, clamps, hoses, screws, and other hardware are not included unless specifically stated\u003c\/p\u003e\n\u003cp\u003eFilter compatibility:\u003c\/p\u003e\n\u003cp\u003eDesigned for a 4 inch \/ 101 mm pod filter\u003c\/p\u003e\n\u003cp\u003eExample style: 4 inch pod filter with rubber neck\u003c\/p\u003e\n\u003cp\u003eSensor \/ port notes:\u003c\/p\u003e\n\u003cp\u003eThe two smaller ports on the adapter are blocked by default\u003c\/p\u003e\n\u003cp\u003eThese ports are intended as possible locations for an air intake temperature sensor and vacuum line if needed\u003c\/p\u003e\n\u003cp\u003eOpening or modifying these ports is the responsibility of the installer\u003c\/p\u003e\n\u003cp\u003eMAF mounting notes:\u003c\/p\u003e\n\u003cp\u003eThe adapter is designed to fit where the stock intake bolts to the MAF sensor tube\u003c\/p\u003e\n\u003cp\u003eOriginal mounting screws may be used\u003c\/p\u003e\n\u003cp\u003eHole alignment may not be perfect on every vehicle, so minor fitting or adjustment may be required\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eRemove the factory intake section as required\u003c\/p\u003e\n\u003cp\u003eTest fit the adapter to the MAF sensor tube before final installation\u003c\/p\u003e\n\u003cp\u003eInstall the pod filter onto the 4 inch adapter side\u003c\/p\u003e\n\u003cp\u003eCheck all clamps and connections before starting the engine\u003c\/p\u003e\n\u003cp\u003eInstallation should be carried out by someone who understands intake fitting and engine bay clearance\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay use\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for custom automotive intake use\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. \u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Pod Filter MAF Intake Adapter\u003c\/p\u003e\n\u003cp\u003ePrinted adapter only\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57814424322431,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/hd2.png?v=1782144586"},{"product_id":"mgf-side-intake-insert-for-70mm-air-intake-tube","title":"MGF Side Intake Insert for 70mm Air Intake Tube","description":"\u003cp\u003eMGF Side Intake Insert for 70mm Air Intake Tube\u003c\/p\u003e\n\u003cp\u003eImprove fresh air routing on your MGF with this side intake insert, designed for the left-hand side air intake opening. The insert allows a 70 mm intake tube to be connected, helping route fresh air toward the airbox area for custom intake setups.\u003c\/p\u003e\n\u003cp\u003eThis part works best together with side scoops and is intended for custom airflow \/ intake routing projects.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for MGF side air intake\u003c\/p\u003e\n\u003cp\u003eLeft-hand side intake insert\u003c\/p\u003e\n\u003cp\u003eAllows connection of a 70 mm air intake tube\u003c\/p\u003e\n\u003cp\u003eHelps route fresh air toward the airbox area\u003c\/p\u003e\n\u003cp\u003eWorks best when used with side scoops\u003c\/p\u003e\n\u003cp\u003eUseful for custom intake and airflow setups\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eSimple functional design for performance-focused builds\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eMain compatibility:\u003c\/p\u003e\n\u003cp\u003eMGF\u003c\/p\u003e\n\u003cp\u003eApplication:\u003c\/p\u003e\n\u003cp\u003eLeft-hand side air intake insert\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting a 70 mm intake tube\u003c\/p\u003e\n\u003cp\u003eImportant fitment note:\u003c\/p\u003e\n\u003cp\u003eThis part is designed for the left-hand side air intake area on the MGF\u003c\/p\u003e\n\u003cp\u003ePlease compare your side intake opening and available space before ordering\u003c\/p\u003e\n\u003cp\u003eThe tube side is 70 mm\u003c\/p\u003e\n\u003cp\u003eIf you want to connect the OEM airbox, you may need to modify the airbox connection or make an additional adapter for a smaller tube\u003c\/p\u003e\n\u003cp\u003eThis is not a complete intake kit\u003c\/p\u003e\n\u003cp\u003eAirbox, side scoop, intake hose, clamps, adapters, and hardware are not included unless specifically stated\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eTest fit the insert before final installation\u003c\/p\u003e\n\u003cp\u003eCheck clearance around the side intake area and airbox route\u003c\/p\u003e\n\u003cp\u003eUse a suitable 70 mm intake hose or adapter setup\u003c\/p\u003e\n\u003cp\u003eSecure all intake tubing properly before driving\u003c\/p\u003e\n\u003cp\u003eInstallation should be carried out by someone who understands custom intake fitting and airflow routing\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for automotive use\u003c\/p\u003e\n\u003cp\u003eUV-stable – suitable for exterior and intake-area use\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for custom automotive airflow applications\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× MGF Left Side Intake Insert\u003c\/p\u003e\n\u003cp\u003ePrinted insert only\u003c\/p\u003e\n\u003cp\u003eModel Origin \/ Credit\u003c\/p\u003e\n\u003cp\u003eOriginal design by Łukasz Nowakowski.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57814453715327,"sku":null,"price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/mfg1.png?v=1782145504"},{"product_id":"opel-c20ne-throttle-body-adapter-for-rover-mg-manifold-55mm-intake-adapter","title":"Opel C20NE Throttle Body Adapter for Rover MG Manifold – 55mm Intake Adapter","description":"\u003cp\u003eOpel C20NE Throttle Body Adapter for Rover MG Manifold – 55mm Intake Adapter\u003c\/p\u003e\n\u003cp\u003eThis throttle body adapter is designed to fit a 55 mm Opel C20NE throttle body to a Rover \/ MG intake manifold. It is a useful part for custom intake conversions, engine swaps, or throttle body upgrade projects where the Opel C20NE throttle body needs to be mounted to a compatible Rover or MG manifold.\u003c\/p\u003e\n\u003cp\u003eThis is a custom adapter part and should be installed by someone who understands intake fitting, throttle body alignment, gasket sealing, and engine bay clearance.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for 55 mm Opel C20NE throttle body\u003c\/p\u003e\n\u003cp\u003eAdapts Opel C20NE throttle body to Rover \/ MG manifold\u003c\/p\u003e\n\u003cp\u003eUseful for custom intake conversion projects\u003c\/p\u003e\n\u003cp\u003eSuitable for engine swap or custom throttle body setups\u003c\/p\u003e\n\u003cp\u003eSimple adapter design for clean mounting\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for automotive engine bay use\u003c\/p\u003e\n\u003cp\u003eGood option for custom Rover, MG, or Opel-based builds\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eMain compatibility:\u003c\/p\u003e\n\u003cp\u003eOpel C20NE 55 mm throttle body\u003c\/p\u003e\n\u003cp\u003eRover \/ MG intake manifold applications\u003c\/p\u003e\n\u003cp\u003eApplication:\u003c\/p\u003e\n\u003cp\u003eThrottle body adapter\u003c\/p\u003e\n\u003cp\u003eIntake manifold conversion adapter\u003c\/p\u003e\n\u003cp\u003eImportant fitment note:\u003c\/p\u003e\n\u003cp\u003eThis adapter is intended for custom conversion use\u003c\/p\u003e\n\u003cp\u003ePlease compare your throttle body, manifold bolt pattern, gasket surface, and available clearance before ordering\u003c\/p\u003e\n\u003cp\u003eFitment may vary depending on manifold version, throttle body version, engine setup, and modifications\u003c\/p\u003e\n\u003cp\u003eThis is not a complete conversion kit\u003c\/p\u003e\n\u003cp\u003eThrottle body, manifold, gasket, bolts, sensors, cables, clamps, and other hardware are not included unless specifically stated\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eTest fit the adapter before final installation\u003c\/p\u003e\n\u003cp\u003eCheck throttle body alignment before tightening\u003c\/p\u003e\n\u003cp\u003eUse a suitable gasket or sealant where required\u003c\/p\u003e\n\u003cp\u003eMake sure the throttle plate opens freely and does not contact the adapter or manifold\u003c\/p\u003e\n\u003cp\u003eCheck for air leaks after installation\u003c\/p\u003e\n\u003cp\u003eInstallation should be carried out by someone who understands custom intake and throttle body fitting\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay use\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for custom automotive intake applications\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Throttle Body Adapter\u003c\/p\u003e\n\u003cp\u003ePrinted adapter only\u003c\/p\u003e\n\u003cp\u003eAttribution:\u003c\/p\u003e\n\u003cp\u003eOriginal design by Łukasz Nowakowski.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57814499295615,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/op1.png?v=1782146539"},{"product_id":"mazda-rx-7-fc3s-intake-pipe-mass-air-flow-meter-replacement","title":"Mazda RX-7 FC3S Intake Pipe – Mass Air Flow Meter Replacement","description":"\u003cp\u003eMazda RX-7 FC3S Intake Pipe – Mass Air Flow Meter Replacement\u003c\/p\u003e\n\u003cp\u003eUpgrade your intake setup with this custom intake pipe designed for the Mazda RX-7 FC3S. This part is intended to replace the factory mass air flow meter in custom intake configurations, making it a useful option for modified builds and aftermarket engine setups.\u003c\/p\u003e\n\u003cp\u003eThis is a custom performance part intended for modified vehicles. Please check compatibility with your specific setup before ordering.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Mazda RX-7 FC3S\u003c\/p\u003e\n\u003cp\u003eIntake pipe for replacing the factory mass air flow meter\u003c\/p\u003e\n\u003cp\u003eSuitable for custom intake setups\u003c\/p\u003e\n\u003cp\u003eUseful for modified and performance-oriented builds\u003c\/p\u003e\n\u003cp\u003eSimple one-piece design\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for automotive engine bay use\u003c\/p\u003e\n\u003cp\u003eIdeal for custom air intake routing\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003c\/p\u003e\n\u003cp\u003eMazda RX-7 FC3S\u003c\/p\u003e\n\u003cp\u003eApplication:\u003c\/p\u003e\n\u003cp\u003eReplacement intake pipe for factory mass air flow meter location\u003c\/p\u003e\n\u003cp\u003eImportant fitment notes:\u003c\/p\u003e\n\u003cp\u003eDesigned for custom builds where the original mass air flow meter is being removed or replaced\u003c\/p\u003e\n\u003cp\u003ePlease compare your existing intake layout, flange shape, bolt pattern, and surrounding clearance before ordering\u003c\/p\u003e\n\u003cp\u003eCompatibility with stock ECU, aftermarket ECU, or tuned setups is the responsibility of the buyer\u003c\/p\u003e\n\u003cp\u003eThis is not a plug-and-play OEM replacement part for all vehicles\u003c\/p\u003e\n\u003cp\u003eThis is not a complete intake kit\u003c\/p\u003e\n\u003cp\u003eFilter, couplers, clamps, hardware, sensors, and other intake components are not included unless specifically stated\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eTest fitting is recommended before final installation\u003c\/p\u003e\n\u003cp\u003eMinor adjustment or custom setup work may be required depending on your intake configuration\u003c\/p\u003e\n\u003cp\u003eInstallation should be carried out by someone who understands custom intake systems and modified vehicle setups\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay use\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for automotive use\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× FC3S Intake Pipe\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57815603446143,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/rx7.png?v=1782161897"},{"product_id":"bmw-e92-335i-airbox-outlet-adapter-for-100mm-intake-hose","title":"BMW E92 335i Airbox Outlet Adapter for 100mm Intake Hose","description":"\u003cp\u003eBMW E92 335i Airbox Outlet Adapter for 100mm Intake Hose\u003c\/p\u003e\n\u003cp\u003eUpgrade or modify the intake setup on your BMW E92 335i with this airbox outlet adapter, designed to connect the factory airbox outlet to a 100 mm intake hose. This part is useful for custom intake routing, airbox modifications, or replacing the original flexible outlet section with a more rigid adapter.\u003c\/p\u003e\n\u003cp\u003eThe fit may be snug because the original part is made from flexible material. If installation feels tight, gently warming the hose or surrounding area with a heat gun can help the part seat correctly.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for BMW E92 335i\u003c\/p\u003e\n\u003cp\u003eAdapts the airbox outlet to a 100 mm hose\u003c\/p\u003e\n\u003cp\u003eUseful for custom intake routing\u003c\/p\u003e\n\u003cp\u003eHelps connect the factory airbox to aftermarket intake hose setups\u003c\/p\u003e\n\u003cp\u003eRigid printed replacement-style adapter\u003c\/p\u003e\n\u003cp\u003eDesigned for engine bay use\u003c\/p\u003e\n\u003cp\u003eSimple functional design\u003c\/p\u003e\n\u003cp\u003eSuitable for modified intake builds\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eMain compatibility:\u003c\/p\u003e\n\u003cp\u003eBMW E92 335i\u003c\/p\u003e\n\u003cp\u003eApplication:\u003c\/p\u003e\n\u003cp\u003eAirbox outlet adapter\u003c\/p\u003e\n\u003cp\u003e100 mm intake hose connection\u003c\/p\u003e\n\u003cp\u003eImportant fitment note:\u003c\/p\u003e\n\u003cp\u003eThis adapter was designed around the BMW E92 335i airbox outlet\u003c\/p\u003e\n\u003cp\u003eFitment with other BMW models is not guaranteed\u003c\/p\u003e\n\u003cp\u003ePlease compare your factory airbox outlet and hose size before ordering\u003c\/p\u003e\n\u003cp\u003eThe original outlet section is flexible, so this rigid adapter may require careful fitting\u003c\/p\u003e\n\u003cp\u003eThis is not a complete intake kit\u003c\/p\u003e\n\u003cp\u003eHose, clamps, airbox, hardware, sensors, and other intake parts are not included unless specifically stated\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eTest fit the adapter before final installation\u003c\/p\u003e\n\u003cp\u003eThe fit may be snug\u003c\/p\u003e\n\u003cp\u003eIf difficult to install, gently warm the hose or fitting area with a heat gun to help it seat properly\u003c\/p\u003e\n\u003cp\u003eDo not overheat the part or surrounding components\u003c\/p\u003e\n\u003cp\u003eCheck all hose connections and clamps before driving\u003c\/p\u003e\n\u003cp\u003eInstallation should be carried out by someone who understands intake fitting and engine bay clearance\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay use\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eDesigned for custom automotive intake use\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Airbox Outlet Adapter\u003c\/p\u003e\n\u003cp\u003ePrinted adapter only\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57815824793983,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/b5.png?v=1782162865"},{"product_id":"nissan-laurel-rb20de-cold-air-intake-adapter-3-inch-maf-air-box-mount","title":"Nissan Laurel RB20DE Cold Air Intake Adapter – 3 Inch MAF Air Box Mount","description":"\u003cp\u003eNissan Laurel RB20DE Cold Air Intake Adapter – 3 Inch MAF Air Box Mount\u003c\/p\u003e\n\u003cp\u003eUpgrade the intake setup on your Nissan Laurel with this 3D-printed cold air intake adapter, designed to replace the factory air box starting point and allow installation of a 3 inch aftermarket intake setup.\u003c\/p\u003e\n\u003cp\u003eThis adapter is made for RB20DE intake conversions while helping keep the MAF sensor in the original OEM area for a cleaner and more practical installation.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Nissan Laurel RB20DE intake setups\u003c\/p\u003e\n\u003cp\u003eAllows installation of a 3 inch cold air intake\u003c\/p\u003e\n\u003cp\u003eMounts where the factory air box begins\u003c\/p\u003e\n\u003cp\u003eHelps retain the MAF sensor in the OEM position\u003c\/p\u003e\n\u003cp\u003eSuitable for aftermarket intake pipes and filter setups\u003c\/p\u003e\n\u003cp\u003eClean adapter design for custom intake conversions\u003c\/p\u003e\n\u003cp\u003eStrong and rigid ASA construction\u003c\/p\u003e\n\u003cp\u003eIdeal for modified cars, swaps, and custom builds\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eMain compatibility:\u003c\/p\u003e\n\u003cp\u003eNissan Laurel with RB20DE engine\u003c\/p\u003e\n\u003cp\u003eOriginally used on a 1992 Nissan Laurel RB20DE setup\u003c\/p\u003e\n\u003cp\u003eAdditional fitment note:\u003c\/p\u003e\n\u003cp\u003eCustomers have reported this adapter may also fit setups with:\u003c\/p\u003e\n\u003cp\u003eRB20DET\u003c\/p\u003e\n\u003cp\u003eRB25DET\u003c\/p\u003e\n\u003cp\u003eVQ30DET\u003c\/p\u003e\n\u003cp\u003eNissan Y33 chassis\u003c\/p\u003e\n\u003cp\u003ePlease note: these additional fitments are based on customer feedback and may depend on your exact intake layout, engine swap, or modifications. Please check your factory air box \/ MAF layout before ordering.\u003c\/p\u003e\n\u003cp\u003eIntake compatibility:\u003c\/p\u003e\n\u003cp\u003eDesigned for 3 inch cold air intake systems\u003c\/p\u003e\n\u003cp\u003eCan be used with Spectre-style or similar aftermarket cold air intake setups\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eMounts where the original air intake box starts\u003c\/p\u003e\n\u003cp\u003eDesigned to keep the MAF sensor in the OEM area\u003c\/p\u003e\n\u003cp\u003eInstallation may require suitable bolts, clamps, intake pipe, or air filter depending on your setup\u003c\/p\u003e\n\u003cp\u003eHardware, clamps, filter, intake pipe, and MAF sensor are not included\u003c\/p\u003e\n\u003cp\u003eInstallation should be done by someone familiar with custom intake fitting\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay and hot car environments\u003c\/p\u003e\n\u003cp\u003eUV-stable – ideal for long-term automotive use\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. \u003cbr\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Cold Air Intake Adapter\u003c\/p\u003e\n\u003cp\u003eHardware, clamps, air filter, intake pipe, and MAF sensor are not included\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57816045748607,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/n5.png?v=1782164578"},{"product_id":"lexus-is200-supercharger-intake-adapter-kit-oem-scoop-to-3-inch-airbox-set","title":"Lexus IS200 Supercharger Intake Adapter Kit – OEM Scoop to 3 Inch Airbox Set","description":"\u003cp\u003eLexus IS200 Supercharger Intake Adapter Kit – OEM Scoop to 3 Inch Airbox Set\u003c\/p\u003e\n\u003cp\u003eUpgrade your intake setup with this 3-part adapter kit designed for Lexus IS200 supercharged builds. This set helps connect the OEM intake air scoop to a 3 inch intake system and airbox setup for a cleaner and more practical installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for custom supercharger intake conversions, this kit provides a neat solution without relying on tape or improvised connections.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Lexus IS200 supercharged intake setups\u003c\/p\u003e\n\u003cp\u003e3-part adapter kit for custom intake routing\u003c\/p\u003e\n\u003cp\u003eConnects the OEM intake scoop to a 3 inch hose or duct setup\u003c\/p\u003e\n\u003cp\u003eHelps create a cleaner and more elegant intake installation\u003c\/p\u003e\n\u003cp\u003eSuitable for airbox and post-filter intake pipe conversions\u003c\/p\u003e\n\u003cp\u003eDesigned for custom supercharger applications\u003c\/p\u003e\n\u003cp\u003eIdeal for modified cars and custom engine bay setups\u003c\/p\u003e\n\u003cp\u003eStrong and rigid ASA construction\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003c\/p\u003e\n\u003cp\u003eLexus IS200 1st generation\u003c\/p\u003e\n\u003cp\u003eDesigned for supercharged setups\u003c\/p\u003e\n\u003cp\u003eSetup compatibility:\u003c\/p\u003e\n\u003cp\u003eDesigned to connect the OEM intake air scoop to a 3\" (76mm) hose or flex duct\u003c\/p\u003e\n\u003cp\u003eDesigned around a Rank One supercharger kit\u003c\/p\u003e\n\u003cp\u003eDesigned around a generic-style SAAS carbon airbox setup\u003c\/p\u003e\n\u003cp\u003eMay also suit similar custom supercharger intake builds with matching layout and dimensions\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eThis is a custom-fit intake conversion set\u003c\/p\u003e\n\u003cp\u003eInstallation may require:\u003c\/p\u003e\n\u003cp\u003e3\" silicone hose\u003c\/p\u003e\n\u003cp\u003ehose clamps\u003c\/p\u003e\n\u003cp\u003ecustom airbox\u003c\/p\u003e\n\u003cp\u003epost-filter charge pipe\u003c\/p\u003e\n\u003cp\u003eAdditional hardware and intake components are not included\u003c\/p\u003e\n\u003cp\u003ePlease check your setup carefully before ordering, especially if using a different supercharger kit, airbox, or custom intake layout\u003c\/p\u003e\n\u003cp\u003eInstallation should be done by someone who understands custom intake fitting\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for hot engine bay environments\u003c\/p\u003e\n\u003cp\u003eUV-stable – ideal for long-term automotive use\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. \u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× OEM Scoop to 3\" Adapter\u003c\/p\u003e\n\u003cp\u003e1× Intake Pipe Section\u003c\/p\u003e\n\u003cp\u003e1× 90° Airbox Intake Adapter\u003c\/p\u003e\n\u003cp\u003eComplete set – 3 parts\u003c\/p\u003e\n\u003cp\u003eHose, clamps, airbox, and other intake hardware are not included\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"3\" Adapter","offer_id":57823073042815,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true},{"title":"Intake Pipe","offer_id":57823073075583,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true},{"title":"Airbox Adapter","offer_id":57823073108351,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true},{"title":"Compete Set","offer_id":57823073141119,"sku":null,"price":140.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/lx9.png?v=1782252658"},{"product_id":"vw-golf-2-5-5-cylinder-ram-air-intake-adapter-filter-mount","title":"VW Golf 2.5 5-Cylinder Ram Air Intake Adapter – Filter Mount","description":"\u003cp\u003eVW Golf 2.5 5-Cylinder Ram Air Intake Adapter – Filter Mount\u003c\/p\u003e\n\u003cp\u003eUpgrade the intake setup on your VW Golf with this 3D-printed ram air intake adapter, designed for the 5-cylinder 2012 VW Golf and made to fit an aftermarket cone-style air filter setup.\u003c\/p\u003e\n\u003cp\u003eThis adapter provides a simple and clean way to mount a performance air filter in place of the factory intake section.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for VW Golf 5-cylinder intake setups\u003c\/p\u003e\n\u003cp\u003eSuitable for 2012 VW Golf 2.5 5-cylinder models\u003c\/p\u003e\n\u003cp\u003eDesigned to fit a K\u0026amp;N-style aftermarket air filter\u003c\/p\u003e\n\u003cp\u003eHelps create a simple ram air intake setup\u003c\/p\u003e\n\u003cp\u003eClean adapter shape for custom intake conversions\u003c\/p\u003e\n\u003cp\u003eIncludes side port connection on the adapter body\u003c\/p\u003e\n\u003cp\u003eStrong and rigid ASA construction\u003c\/p\u003e\n\u003cp\u003eIdeal for modified cars, intake upgrades, and custom engine bay setups\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003c\/p\u003e\n\u003cp\u003e2012 VW Golf\u003c\/p\u003e\n\u003cp\u003e5-cylinder engine models\u003c\/p\u003e\n\u003cp\u003eCommonly used on VW Golf 2.5 intake setups\u003c\/p\u003e\n\u003cp\u003eFilter compatibility:\u003c\/p\u003e\n\u003cp\u003eDesigned for aftermarket cone-style air filters\u003c\/p\u003e\n\u003cp\u003eMade to fit a K\u0026amp;N-style air filter setup\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eReplaces part of the factory intake setup\u003c\/p\u003e\n\u003cp\u003eMay require hose clamps or additional intake hardware depending on your setup\u003c\/p\u003e\n\u003cp\u003eAir filter, clamps, sensors, hoses, and hardware are not included\u003c\/p\u003e\n\u003cp\u003ePlease check your intake layout and filter size before ordering\u003c\/p\u003e\n\u003cp\u003eInstallation should be done by someone familiar with custom intake fitting\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay and hot car environments\u003c\/p\u003e\n\u003cp\u003eUV-stable – ideal for long-term automotive use\u003c\/p\u003e\n\u003cp\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. \u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Ram Air Intake Adapter\u003c\/p\u003e\n\u003cp\u003eAir filter, clamps, hoses, sensors, and hardware are not included\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57823137202559,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/golf5.png?v=1782253835"}],"url":"https:\/\/www.carculturecyprus.com\/collections\/intake.oembed?page=3","provider":"Car Culture Cyprus","version":"1.0","type":"link"}