{"title":"Ford","description":"","products":[{"product_id":"f150-rotary-shifter-center-console-insert-with-nalgene-compatible-cupholder","title":"F150 Rotary Shifter Center Console Insert with Nalgene-Compatible Cupholder","description":"\u003cp\u003eF150 Rotary Shifter Console Insert with Deep Nalgene Cupholder – Fits 2021–2024 Ford F150 \/ Lightning\u003c\/p\u003e\n\u003cp\u003eUpgraded version with improved shifter alignment, thicker walls, and reinforced mounting tabs\u003c\/p\u003e\n\u003cp\u003eUpgrade your Ford F150 interior with this fully redesigned rotary shifter console insert, featuring a deep Nalgene-compatible cupholder and additional storage tray.\u003cbr\u003eThis model has been rebuilt for better durability, improved shifter alignment — perfect for anyone performing the popular rotary shifter conversion.\u003c\/p\u003e\n\u003cp\u003e🚗 Fitment \u0026amp; Compatibility\u003c\/p\u003e\n\u003cp\u003eThis console insert is designed for:\u003c\/p\u003e\n\u003cp\u003e✔ 2021–2024 Ford F150\u003cbr\u003e✔ 2022–2024 Ford F150 Lightning\u003cbr\u003e✔ Rotary shifter swap using:\u003cbr\u003eFord Escape Rotary Shifter (part # LX6Z-7P155-U)\u003c\/p\u003e\n\u003cp\u003e⚠ Important Fitment Note\u003c\/p\u003e\n\u003cp\u003eIf you are using the diamond-shaped front shifter housing, you will need to trim a small amount of plastic from the front end of the shifter module.\u003cbr\u003eUsers confirmed this is required due to limited clearance between the rotary shifter and the cupholder wall.\u003c\/p\u003e\n\u003cp\u003eA video walkthrough (mentioned by users) shows installation takes ~30 minutes.\u003c\/p\u003e\n\u003cp\u003e🛠️ Main Improvements Over Original Models\u003c\/p\u003e\n\u003cp\u003eBased on community feedback and extensive redesign:\u003c\/p\u003e\n\u003cp\u003eAdjusted rotary shifter position for proper alignment and improved concentricity\u003c\/p\u003e\n\u003cp\u003eThicker walls \u0026amp; mounting tabs → higher durability and better longevity\u003c\/p\u003e\n\u003cp\u003eAdded rear shifter boss ribs → stronger support during tightening\u003c\/p\u003e\n\u003cp\u003eFilled front pocket to eliminate dust build-up\u003c\/p\u003e\n\u003cp\u003eCorrected shifter alignment bosses (new V23 update)\u003c\/p\u003e\n\u003cp\u003eReduced need for supports by reworking tabs (V22 update)\u003c\/p\u003e\n\u003cp\u003eThis is the cleanest and most stable version available of this popular mod.\u003c\/p\u003e\n\u003cp\u003e🧩 Features\u003c\/p\u003e\n\u003cp\u003eDeep Nalgene-compatible cupholder\u003c\/p\u003e\n\u003cp\u003eSide storage tray for phone\/wallet\/charging cable\u003c\/p\u003e\n\u003cp\u003eOEM-style geometry that fits clean under the console trim\u003c\/p\u003e\n\u003cp\u003eBuilt around the dimensions of the Escape rotary shifter\u003c\/p\u003e\n\u003cp\u003eReinforced internal structure\u003c\/p\u003e\n\u003cp\u003eFunctional, strong, and ready for daily use\u003c\/p\u003e\n\u003cp\u003e📏 Dimensions\u003c\/p\u003e\n\u003cp\u003e235.28 × 151.29 × 248.86 mm\u003c\/p\u003e\n\u003cp\u003e🔧 Installation Notes\u003c\/p\u003e\n\u003cp\u003eRemove factory console insert.\u003c\/p\u003e\n\u003cp\u003eInstall the Escape rotary shifter (LX6Z-7P155-U).\u003c\/p\u003e\n\u003cp\u003eTrim ~2–3 mm from the diamond-front shifter housing if using that version.\u003c\/p\u003e\n\u003cp\u003eDrop this console insert in place.\u003c\/p\u003e\n\u003cp\u003eReinstall console trim.\u003c\/p\u003e\n\u003cp\u003eNo hardware required — all mounting is integrated into the model.\u003c\/p\u003e\n\u003cp\u003e♻️ Material \u0026amp; Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA, the ideal material for automotive interiors:\u003c\/p\u003e\n\u003cp\u003eHeat resistant\u003c\/p\u003e\n\u003cp\u003eUV stable\u003c\/p\u003e\n\u003cp\u003eMatte OEM-like finish\u003c\/p\u003e\n\u003cp\u003eQuality is excellent, but keep in mind this is a 3D-printed part:\u003cbr\u003eThere may be small visible layer lines.\u003cbr\u003eFor a perfect smooth finish, sanding + primer can be used, but not required.\u003c\/p\u003e\n\u003cp\u003eFully functional as-is.\u003c\/p\u003e\n\u003cp\u003e🙌 Credits \u0026amp; License Notice\u003c\/p\u003e\n\u003cp\u003eThis upgraded console insert is based on community-shared open-source designs released under the Creative Commons – Attribution – ShareAlike license.\u003c\/p\u003e\n\u003cp\u003eSpecial thanks and full attribution to the original creators:\u003c\/p\u003e\n\u003cp\u003emazonta – creator of “F150 Rotary Shifter Console with Nalgene Cupholder”\u003cbr\u003eLicensed under CC BY-SA.\u003c\/p\u003e\n\u003cp\u003ederek228 – creator of “F-150 Truck Shifter Console, for Nalgene Water Bottle”\u003cbr\u003eLicensed under CC BY-SA.\u003c\/p\u003e\n\u003cp\u003eThis version includes numerous structural updates, alignment corrections, reinforced tabs, shifter boss adjustments, and print-optimized geometry — but it remains a derivative work, shared in the same open spirit as the original models.\u003c\/p\u003e\n\u003cp\u003eDeep appreciation also goes to the F150 \/ F150 Lightning community members whose comments, measurements, fitment reports, and testing helped shape this improved edition.\u003cbr\u003eYour contributions directly enabled a stronger, more accurate, and easier-to-install design. 🙌\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497863197055,"sku":null,"price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/bf2f7859-il_fullxfull.7453438486_q0jm.jpg?v=1764533164"},{"product_id":"2011-2016-ford-superduty-f250-f350-double-cup-holder-insert-fits-nalgene-hydroflask","title":"2011–2016 Ford SuperDuty (F250\/F350) Double Cup Holder Insert – Fits Nalgene \u0026 HydroFlask","description":"\u003cp\u003e2011–2016 Ford SuperDuty (F250\/F350) Double Cup Holder Insert – Fits Nalgene \u0026amp; HydroFlask – Deep Fit Upgrade\u003c\/p\u003e\n\u003cp\u003eTransform the useless shallow cup holders in your 2011–2016 Ford F250\/F350 SuperDuty into a deep, secure, real cupholder system that finally fits large bottles like Nalgene and HydroFlask.\u003c\/p\u003e\n\u003cp\u003eThis insert replaces the factory cupholder plates with a full-depth dual cup system, available in two sizes depending on your bottle type.\u003c\/p\u003e\n\u003cp\u003e🔥 Available Versions (Choose Your Size)\u003cbr\u003e1️⃣ Nalgene Version (Standard) – 100mm + 90mm\u003c\/p\u003e\n\u003cp\u003eBased on user-confirmed measurements from the original design:\u003c\/p\u003e\n\u003cp\u003eLarge cupholder: 100 mm (3.93\")\u003cbr\u003ePerfect for:\u003cbr\u003e✔ 32 oz Nalgene\u003cbr\u003e✔ HydroFlask 32 oz\u003cbr\u003e✔ Large insulated bottles\u003cbr\u003e✔ Big mugs \/ thermos\u003c\/p\u003e\n\u003cp\u003eSmaller cupholder: 90 mm (3.54\")\u003cbr\u003eFits:\u003cbr\u003e✔ Standard coffee cups\u003cbr\u003e✔ Soda bottles\u003cbr\u003e✔ Yeti 20 oz\u003cbr\u003e✔ Medium tumblers\u003c\/p\u003e\n\u003cp\u003eUsers confirmed:\u003cbr\u003e➡️ “It fits a Hydroflask.”\u003cbr\u003e➡️ Sits firmly with just enough room, not overly tight.\u003c\/p\u003e\n\u003cp\u003e2️⃣ Dual 3.75\" Cup Version\u003c\/p\u003e\n\u003cp\u003eBoth cupholders: 3.75\" \/ ~95 mm\u003c\/p\u003e\n\u003cp\u003eBest for those who want two equal large cupholders.\u003c\/p\u003e\n\u003cp\u003e🛠️ Fitment\u003c\/p\u003e\n\u003cp\u003e✔ Ford SuperDuty F250 \/ F350\u003cbr\u003e✔ Model years 2011–2016\u003cbr\u003e✔ Direct drop-in replacement\u003cbr\u003e✔ No trimming or drilling\u003c\/p\u003e\n\u003cp\u003eThe insert sits fully flush under the silver\/chrome factory bezel, exactly as shown in the install photos.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDeep wells to stop bottles from tipping\u003c\/p\u003e\n\u003cp\u003ePerfect sizing for large bottles\u003c\/p\u003e\n\u003cp\u003eSmooth interior curves — easy to clean\u003c\/p\u003e\n\u003cp\u003eOEM-style fit under the factory trim\u003c\/p\u003e\n\u003cp\u003eAvailable in two functional size layouts\u003c\/p\u003e\n\u003cp\u003eOptional side holes for RAM mount ball\u003c\/p\u003e\n\u003cp\u003eStrong, rugged, automotive-ready construction\u003c\/p\u003e\n\u003cp\u003e🧩 What’s Included\u003c\/p\u003e\n\u003cp\u003e1x Cup holder insert (your chosen size)\u003c\/p\u003e\n\u003cp\u003eReady to drop into the existing SuperDuty cupholder plate\u003c\/p\u003e\n\u003cp\u003e♻️ Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted from high-temperature ASA, ideal for interiors:\u003c\/p\u003e\n\u003cp\u003eUV resistant\u003c\/p\u003e\n\u003cp\u003eFade-proof\u003c\/p\u003e\n\u003cp\u003eHeat resistant\u003c\/p\u003e\n\u003cp\u003eImpact strong\u003c\/p\u003e\n\u003cp\u003eQuality is excellent, but as with any 3D print:\u003c\/p\u003e\n\u003cp\u003eMinor layer texture can be visible\u003c\/p\u003e\n\u003cp\u003eFor a factory-smooth finish, sanding\/primer is optional\u003c\/p\u003e\n\u003cp\u003eFully functional right out of the box\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions\u003c\/p\u003e\n\u003cp\u003e211 × 119.8 × 89 mm\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eRemove factory top cup plates\u003c\/p\u003e\n\u003cp\u003eDrop insert in place\u003c\/p\u003e\n\u003cp\u003eReinstall the trim — done\u003cbr\u003eNo rattles, no movement.\u003c\/p\u003e\n\u003cp\u003eOptional: add a dab of double-sided tape if you want it 100% locked.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Nalgene Version","offer_id":56497863262591,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true},{"title":"Dual 3.75","offer_id":56497863295359,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/ec5fb49a-il_fullxfull.7501167355_2w6g.jpg?v=1765070032"},{"product_id":"ford-ranger-next-gen-2023-center-console-tray-xlt-lariat-tremor","title":"Ford Ranger Next-Gen 2023 Center Console Tray (XLT \/ Lariat \/ Tremor)","description":"\u003cp\u003eFord Ranger Next-Gen 2023 Center Console Tray (XLT \/ Lariat \/ Tremor)\u003c\/p\u003e\n\u003cp\u003eDeep-fit upgraded version – improved size for better stability\u003c\/p\u003e\n\u003cp\u003e🔥 Description\u003c\/p\u003e\n\u003cp\u003eUpgrade the center console of your 2023 Ford Ranger (Next-Gen) with this improved deep-fit center console organizer tray.\u003cbr\u003eDesigned to replace the shallow factory pocket with a much more practical, divided storage tray for everyday items.\u003c\/p\u003e\n\u003cp\u003eThis version has been made larger and deeper to fit the 2023 console pocket more securely and to prevent small items from sliding or rattling around.\u003c\/p\u003e\n\u003cp\u003e🧩 Fitment Notes (Important)\u003c\/p\u003e\n\u003cp\u003e✔ Confirmed fit:\u003cbr\u003eFord Ranger Next-Gen 2023 (XLT \/ Lariat \/ Tremor)\u003c\/p\u003e\n\u003cp\u003e❗ Does NOT fit:\u003cbr\u003eFord Ranger 2024 XLT — the 2024 console pocket was updated and is slightly different.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDeep storage pocket for improved stability compared to shallow factory tray\u003c\/p\u003e\n\u003cp\u003eDivider slot with finger cutout for easy access to both sections\u003c\/p\u003e\n\u003cp\u003eOrganizes coins, keys, wallet, receipts, charging cables, small tools\u003c\/p\u003e\n\u003cp\u003eSmooth edges and OEM-style geometry\u003c\/p\u003e\n\u003cp\u003eDrops in with no modification\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eDrop-in fit — no screws, no cutting\u003c\/p\u003e\n\u003cp\u003eCan be secured with two strips of 3M tape if you want a permanent hold\u003c\/p\u003e\n\u003cp\u003eEasy to remove for cleaning\u003c\/p\u003e\n\u003cp\u003e♻️ Material \u0026amp; Build Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA, ideal for vehicle interiors:\u003c\/p\u003e\n\u003cp\u003eHeat-resistant (perfect for hot climates)\u003c\/p\u003e\n\u003cp\u003eUV-stable (won’t fade)\u003c\/p\u003e\n\u003cp\u003eDurable and rigid for everyday use\u003c\/p\u003e\n\u003cp\u003eQuality is excellent, but as with all 3D-printed parts:\u003c\/p\u003e\n\u003cp\u003eMinor layer lines may be visible up close\u003c\/p\u003e\n\u003cp\u003eFor factory-smooth finish, sanding\/priming\/painting is optional\u003c\/p\u003e\n\u003cp\u003eFully usable as-is\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497863328127,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/5a45d3b6-il_fullxfull.7501100801_orp8.jpg?v=1764533168"},{"product_id":"ford-maverick-cubby-phone-mount-2-sizes-fits-2022-2025","title":"Ford Maverick Cubby Phone Mount – 2 Sizes | Fits 2022–2025","description":"\u003cp\u003eFord Maverick Cubby Phone Mount – 2 Sizes | Drop-In Dash Phone Holder | Fits 2022–2025 Maverick\u003c\/p\u003e\n\u003cp\u003eUpgrade your Ford Maverick interior with a clean, secure, drop-in cubby phone mount that fits directly into the dash storage pocket.\u003cbr\u003eChoose between two phone tray sizes for a perfect fit for your device — from compact phones to large Pro Max \/ Ultra models.\u003c\/p\u003e\n\u003cp\u003eThis holder uses a threaded ball + locking nut system for strong, stable positioning with full angle adjustment.\u003c\/p\u003e\n\u003cp\u003e✅ What You Get\u003c\/p\u003e\n\u003cp\u003eEach option includes:\u003c\/p\u003e\n\u003cp\u003eCubby insert (drops into the Maverick dash tray)\u003c\/p\u003e\n\u003cp\u003ePhone tray (small or large)\u003c\/p\u003e\n\u003cp\u003eBall mount\u003c\/p\u003e\n\u003cp\u003eLocking nut\u003c\/p\u003e\n\u003cp\u003eChoose the size based on your phone (compatibility chart below).\u003c\/p\u003e\n\u003cp\u003e📱 Phone Tray Options\u003cbr\u003e1️⃣ SMALL Tray (85.18 mm width)\u003c\/p\u003e\n\u003cp\u003eBest for compact and mid-size phones.\u003c\/p\u003e\n\u003cp\u003eRecommended for:\u003c\/p\u003e\n\u003cp\u003eiPhone 12 mini \/ 13 mini\u003c\/p\u003e\n\u003cp\u003eiPhone SE 2020\/2022\u003c\/p\u003e\n\u003cp\u003eiPhone 6–11 Pro\u003c\/p\u003e\n\u003cp\u003eiPhone 12 \/ 13 \/ 14 \/ 15 (without thick case)\u003c\/p\u003e\n\u003cp\u003eSamsung S22 \/ S23 \/ S24\u003c\/p\u003e\n\u003cp\u003ePixel 4a, Pixel 5\u003c\/p\u003e\n\u003cp\u003eNOT recommended for:\u003c\/p\u003e\n\u003cp\u003eiPhone 12\/13\/14\/15 Pro Max\u003c\/p\u003e\n\u003cp\u003eiPhone 14\/15 Plus\u003c\/p\u003e\n\u003cp\u003eSamsung S21+\/S22+\/S23+\u003c\/p\u003e\n\u003cp\u003eSamsung Ultra models\u003c\/p\u003e\n\u003cp\u003ePixel 7\/8 and Pro models\u003c\/p\u003e\n\u003cp\u003eTray Dimensions: 35.0 × 85.2 × 80.0 mm\u003c\/p\u003e\n\u003cp\u003e2️⃣ LARGE Tray (96.2 mm width)\u003c\/p\u003e\n\u003cp\u003eFits almost all modern smartphones, including large devices with cases.\u003c\/p\u003e\n\u003cp\u003eRecommended for:\u003c\/p\u003e\n\u003cp\u003eAll iPhones including Pro Max and Plus\u003c\/p\u003e\n\u003cp\u003eSamsung S-series, S+ and Ultra\u003c\/p\u003e\n\u003cp\u003ePixel 7\/8 and all Pro models\u003c\/p\u003e\n\u003cp\u003eMost phones up to 96 mm width\u003c\/p\u003e\n\u003cp\u003eTray Dimensions: 42.0 × 96.2 × 80.0 mm\u003c\/p\u003e\n\u003cp\u003e🚗 Perfect Fit for Ford Maverick\u003c\/p\u003e\n\u003cp\u003eCompatible with 2022–2025 Ford Maverick\u003c\/p\u003e\n\u003cp\u003eDrops directly into factory cubby\u003c\/p\u003e\n\u003cp\u003eNo cutting or drilling\u003c\/p\u003e\n\u003cp\u003eClean, OEM-like appearance\u003c\/p\u003e\n\u003cp\u003e🔧 How It Works\u003c\/p\u003e\n\u003cp\u003ePlace the cubby insert into the dash pocket.\u003c\/p\u003e\n\u003cp\u003eAttach the tray to the ball mount.\u003c\/p\u003e\n\u003cp\u003eTighten the nut to lock the desired viewing angle.\u003c\/p\u003e\n\u003cp\u003eInsert your phone — done.\u003c\/p\u003e\n\u003cp\u003eThe ball joint allows you to tilt, angle, and position your phone exactly where you want it.\u003c\/p\u003e\n\u003cp\u003e♻️ Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in automotive-grade ASA, which offers:\u003c\/p\u003e\n\u003cp\u003eHeat resistance (ideal for hot dashboards)\u003c\/p\u003e\n\u003cp\u003eUV resistance (won’t fade in sunlight)\u003c\/p\u003e\n\u003cp\u003eHigh structural strength\u003c\/p\u003e\n\u003cp\u003ePrint quality is excellent, but as with all 3D-printed parts:\u003c\/p\u003e\n\u003cp\u003eminor layer lines may be visible upon close inspection\u003c\/p\u003e\n\u003cp\u003efor a factory-smooth surface, you may sand\/prime\/paint\u003c\/p\u003e\n\u003cp\u003efully usable as-is straight out of the box\u003c\/p\u003e\n\u003cp\u003e📐 Model Dimensions (Reference)\u003c\/p\u003e\n\u003cp\u003eCubby insert: 58 × 122 × 75 mm\u003c\/p\u003e\n\u003cp\u003eLarge tray: 42.05 × 96.19 × 80 mm\u003c\/p\u003e\n\u003cp\u003eSmall tray: 35.03 × 85.18 × 80 mm\u003c\/p\u003e\n\u003cp\u003eLocking nut: matching threaded fit\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Small Tray 85mm","offer_id":56497863393663,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"Large Tray 96mm","offer_id":56497863426431,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"Base and both trays","offer_id":56497863459199,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/0395ea0f-il_fullxfull.7501056955_t6tc.jpg?v=1765069957"},{"product_id":"air-outlet-defroster-vent-for-american-ford-1965-galaxie-under-dashboard-vent-custom-reproduction","title":"Air Outlet \/ Defroster Vent for American Ford 1965 (Galaxie) – Under-Dashboard Vent – Custom Reproduction","description":"\u003cp\u003eAir Outlet \/ Defroster Vent for American Ford 1965 (Galaxie) – Under-Dashboard Vent – Custom Reproduction\u003c\/p\u003e\n\u003cp\u003eRestore proper airflow in your classic 1965 Ford Galaxie with this high-quality reproduction under-dashboard air outlet \/ defroster vent.\u003cbr\u003ePerfect for replacing cracked, brittle, or missing original vents — and may also fit other American Ford models from the same era (please check dimensions).\u003c\/p\u003e\n\u003cp\u003e⭐ Product Features\u003c\/p\u003e\n\u003cp\u003eDirect replacement for under-dash defroster\/air outlet\u003cbr\u003eDesigned around the original ’65 Galaxie geometry.\u003c\/p\u003e\n\u003cp\u003eSmooth internal air channel for improved airflow distribution.\u003c\/p\u003e\n\u003cp\u003eAutomotive-grade ASA material with excellent UV and heat resistance.\u003c\/p\u003e\n\u003cp\u003eDurable and sturdy — far stronger than aged OEM plastic.\u003c\/p\u003e\n\u003cp\u003eClean and accurate design, modeled for a factory-like fit.\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment\u003c\/p\u003e\n\u003cp\u003eFord Galaxie 1965\u003c\/p\u003e\n\u003cp\u003eMay fit other mid-60s Ford models — verify dimensions to confirm.\u003cbr\u003eSize: 190.9 × 204.6 × 187.6 mm\u003c\/p\u003e\n\u003cp\u003e🎨 Quality \u0026amp; Finish\u003c\/p\u003e\n\u003cp\u003eThis part is produced on a high-precision 3D printer using premium settings, so the quality is excellent — clean surfaces, strong structure, and a professional look.\u003c\/p\u003e\n\u003cp\u003eHowever, it is still a 3D-printed part, which means:\u003c\/p\u003e\n\u003cp\u003every small layer lines may be visible upon close inspection,\u003c\/p\u003e\n\u003cp\u003efor a perfect factory-smooth finish, you can sand, prime, and paint it.\u003c\/p\u003e\n\u003cp\u003eThat said, most buyers use it as-is, and it already looks great right out of the box.\u003c\/p\u003e\n\u003cp\u003e📦 Material\u003c\/p\u003e\n\u003cp\u003eASA (Acrylic Styrene Acrylonitrile)\u003c\/p\u003e\n\u003cp\u003eUV-resistant\u003c\/p\u003e\n\u003cp\u003eHeat-resistant (ideal for dashboards and defrosters)\u003c\/p\u003e\n\u003cp\u003eStronger and more durable than old OEM plastics\u003c\/p\u003e\n\u003cp\u003e🛠️ Installation\u003c\/p\u003e\n\u003cp\u003eBolt-on style\u003c\/p\u003e\n\u003cp\u003eMounting holes match the original design\u003c\/p\u003e\n\u003cp\u003eNo modifications required for the 1965 Galaxie\u003c\/p\u003e\n\u003cp\u003eProfessionally manufactured, inspected, and packed before shipping.\u003c\/p\u003e\n\u003cp\u003e⭐ Perfect For\u003c\/p\u003e\n\u003cp\u003eRestorations\u003c\/p\u003e\n\u003cp\u003eDaily drivers\u003c\/p\u003e\n\u003cp\u003eOEM replacement\u003c\/p\u003e\n\u003cp\u003eResto-mod builds\u003c\/p\u003e\n\u003cp\u003eClassic car preservation\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497863360895,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/98313c12-il_fullxfull.7500979701_ju8m.jpg?v=1764533170"},{"product_id":"ford-f150-6x9-speaker-brackets-set-of-2-front-door-speaker-adapters","title":"Ford F150 6x9 Speaker Brackets set of 2| Front Door Speaker Adapters","description":"\u003cp\u003ering Your F150’s Sound System to Life 🔊\u003c\/p\u003e\n\u003cp\u003eIf you’re upgrading your Ford F150’s audio system, these 6x9 speaker brackets are exactly what you need. Designed for a clean, solid, OEM-style installation, they allow you to mount full-size 6x9 speakers in the front doors — unlocking better bass, better clarity, and a noticeable improvement over factory sound.\u003c\/p\u003e\n\u003cp\u003eThe result?\u003cbr\u003eA truck that not only drives great, but sounds great too.\u003c\/p\u003e\n\u003cp\u003eWhy Owners Choose These Brackets\u003c\/p\u003e\n\u003cp\u003e✔ Perfect fit for 2015–2020 F150\u003cbr\u003e✔ Supports all standard 6x9 aftermarket speakers\u003cbr\u003e✔ Uses factory mounting points — no cutting, no drilling\u003cbr\u003e✔ Rigid, stable brackets for a rattle-free installation\u003cbr\u003e✔ Helps create a tighter seal for improved low-end response\u003cbr\u003e✔ Clean, factory-style appearance\u003c\/p\u003e\n\u003cp\u003eEngineered to handle vibration, temperature changes, and real-world use in a work truck, daily driver, or show build.\u003c\/p\u003e\n\u003cp\u003eFitment\u003c\/p\u003e\n\u003cp\u003eFord F150 2015–2020\u003cbr\u003e(Other models may fit if they share the same inner door structure.)\u003c\/p\u003e\n\u003cp\u003eInstallation\u003c\/p\u003e\n\u003cp\u003eQuick and straightforward:\u003c\/p\u003e\n\u003cp\u003eRemove door panel\u003c\/p\u003e\n\u003cp\u003eBolt the brackets into OEM locations\u003c\/p\u003e\n\u003cp\u003eMount your 6x9 speakers\u003c\/p\u003e\n\u003cp\u003eConnect wiring\u003c\/p\u003e\n\u003cp\u003eReinstall the panel\u003c\/p\u003e\n\u003cp\u003eOptional: add a thin foam gasket for a perfect acoustic seal.\u003c\/p\u003e\n\u003cp\u003eWhat’s Included\u003c\/p\u003e\n\u003cp\u003e2× 6x9 Speaker Brackets — Left + Right\u003c\/p\u003e\n\u003cp\u003eReady for installation\u003c\/p\u003e\n\u003cp\u003eBuilt for durability and long-term performance\u003c\/p\u003e\n\u003cp\u003eIdeal For\u003c\/p\u003e\n\u003cp\u003eAudio enthusiasts\u003c\/p\u003e\n\u003cp\u003eDrivers upgrading from worn-out OEM speakers\u003c\/p\u003e\n\u003cp\u003eAnyone wanting deeper bass and cleaner mids without modifying the truck\u003c\/p\u003e\n\u003cp\u003eA simple upgrade that makes a big difference in sound quality.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497863557503,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/a7af18ef-il_fullxfull.7451119078_gnca.jpg?v=1765069027"},{"product_id":"ford-fiesta-st-cup-holder-inserts-center-console-cubby-tray-2016-2020","title":"Ford Fiesta ST Cup Holder Inserts – Center Console Cubby Tray (2016–2020)","description":"\u003cp\u003eFord Fiesta ST Cup Holder Inserts – Center Console Cubby Tray (2016–2020)\u003c\/p\u003e\n\u003cp\u003ePerfect-fit organizer for the small, oddly-shaped cubby in the Ford Fiesta ST \/ MK7.5\u003c\/p\u003e\n\u003cp\u003eTired of the small, almost useless cubby in your Fiesta ST?\u003cbr\u003eThis custom-designed tray transforms that space into a practical, usable storage area — ideal for coins, keys, parking cards, AirTag, small tools, lip balm, or loose items rolling around your console.\u003c\/p\u003e\n\u003cp\u003ePrinted in automotive-grade ASA (heat \u0026amp; UV resistant), it is built to survive hot summers and daily use without warping.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003ePerfect OEM-style fit for Ford Fiesta ST (2016–2020, MK7.5 facelift)\u003c\/p\u003e\n\u003cp\u003eConverts the shallow, curved cubby into a flat, practical mini-storage tray\u003c\/p\u003e\n\u003cp\u003eSmooth, rounded interior for easy cleaning\u003c\/p\u003e\n\u003cp\u003eSlight front lip keeps items from sliding out\u003c\/p\u003e\n\u003cp\u003eOptional double-sided tape can be used for extra hold (rarely needed)\u003c\/p\u003e\n\u003cp\u003e📌 Fitment\u003c\/p\u003e\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cp\u003eFord Fiesta ST (2016, 2017, 2018, 2019, 2020)\u003c\/p\u003e\n\u003cp\u003eFits any Fiesta model with this exact cubby shape\u003c\/p\u003e\n\u003cp\u003e🧵 Material\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA:\u003c\/p\u003e\n\u003cp\u003eHeat-resistant (important for car interiors)\u003c\/p\u003e\n\u003cp\u003eUV stable\u003c\/p\u003e\n\u003cp\u003eStrong and long-lasting\u003cbr\u003eBlack OEM-style finish.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eSimply push into place — pressure fits securely\u003c\/p\u003e\n\u003cp\u003eNo drilling or modifications\u003c\/p\u003e\n\u003cp\u003eOptional: add thin double-sided tape if you want a tighter lock\u003c\/p\u003e\n\u003cp\u003eInstall in seconds\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions\u003c\/p\u003e\n\u003cp\u003eApprox: 136.7 × 103.8 × 34 mm\u003cbr\u003eCustom-designed to match the exact interior contour.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Ford Fiesta ST Center Console Cubby Tray (Cup Holder Insert)\u003c\/p\u003e\n\u003cp\u003e🚗 Perfect For Storing:\u003c\/p\u003e\n\u003cp\u003eKeys\u003c\/p\u003e\n\u003cp\u003eLoose coins\u003c\/p\u003e\n\u003cp\u003eBusiness cards\u003c\/p\u003e\n\u003cp\u003eEarbuds\u003c\/p\u003e\n\u003cp\u003eAirTag\u003c\/p\u003e\n\u003cp\u003eSmall wallet\u003c\/p\u003e\n\u003cp\u003eUSB stick\u003c\/p\u003e\n\u003cp\u003eClean, simple, OEM-style organization for your Fiesta ST.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497863655807,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/16003da8-il_fullxfull.7450997354_5496.jpg?v=1765068977"},{"product_id":"ford-maverick-front-console-organizer-with-phone-holder-2022-2024-maverick-storage-tray-insert-black","title":"Ford Maverick Front Console Organizer with Phone Holder – 2022-2024 Maverick Storage Tray Insert Black","description":"\u003cp\u003eFord Maverick Front Console Organizer with Phone Holder – 2022-2024 Maverick Storage Tray Insert\u003c\/p\u003e\n\u003cp\u003e🔶 Description\u003c\/p\u003e\n\u003cp\u003eUpgrade your Ford Maverick’s interior with this custom front console organizer designed to fit perfectly into the small cubby in front of the center console.\u003cbr\u003eThis insert transforms an otherwise shallow, awkward compartment into a highly functional storage space with divided sections for your daily essentials.\u003c\/p\u003e\n\u003cp\u003eCompatible with:\u003cbr\u003e✔ Ford Maverick 2022, 2023, 2024 (all trims)\u003c\/p\u003e\n\u003cp\u003e✨ Features\u003c\/p\u003e\n\u003cp\u003ePrecision-fit design — drops directly into the small factory cubby, no tools required\u003c\/p\u003e\n\u003cp\u003eBuilt-in phone stand — holds your smartphone securely at a visible angle\u003c\/p\u003e\n\u003cp\u003eMulti-section layout — dedicated spaces for wallet, coins, pens, keys, receipts, parking cards, etc.\u003c\/p\u003e\n\u003cp\u003eDeep pockets — nothing falls out during driving\u003c\/p\u003e\n\u003cp\u003eOEM-style look — matches the interior shape and style of the Maverick\u003c\/p\u003e\n\u003cp\u003eDurable ASA construction — UV-resistant, heat-resistant, perfect for hot car interiors\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions\u003c\/p\u003e\n\u003cp\u003eApprox. 220 × 97 × 120 mm\u003cbr\u003e(Designed specifically using the Maverick cubby geometry for a perfect drop-in fit)\u003c\/p\u003e\n\u003cp\u003e📦 Material\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA for maximum durability:\u003c\/p\u003e\n\u003cp\u003eUV resistant\u003c\/p\u003e\n\u003cp\u003eHeat resistant\u003c\/p\u003e\n\u003cp\u003eWon’t deform inside the car\u003c\/p\u003e\n\u003cp\u003eMatte Black OEM-like surface finish\u003c\/p\u003e\n\u003cp\u003e📌 Installation\u003c\/p\u003e\n\u003cp\u003eSimply place the organizer into the cubby.\u003cbr\u003eNo screws, no tape, no tools.\u003cbr\u003eFits snugly and stays in place.\u003c\/p\u003e\n\u003cp\u003e📸 Notes\u003c\/p\u003e\n\u003cp\u003eThe listing is for the organizer only — phone \u0026amp; accessories shown in photos are for demonstration.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497863623039,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/12f36396-il_fullxfull.7451057174_snew.jpg?v=1765068935"},{"product_id":"ford-f-150-center-console-front-organizer-tray-2017-2020-storage-divider-insert","title":"Ford F-150 Center Console Front Organizer Tray 2017-2020 | Storage Divider Insert","description":"\u003cp\u003eFord F-150 Center Console Organizer Tray (Front Section)\u003c\/p\u003e\n\u003cp\u003eA custom front organizer tray designed specifically for 2017, 2018, 2019, 2020 Ford F-150 center consoles.\u003cbr\u003eThis upgraded insert clips securely onto the factory hanging-folder rail, providing structured storage and transforming unused space into a practical organizer.\u003c\/p\u003e\n\u003cp\u003ePerfect for drivers who want more order, easier access to essentials, and a clean OEM-style fit.\u003c\/p\u003e\n\u003cp\u003e✔ Features\u003c\/p\u003e\n\u003cp\u003eDouble cellphone holder (fits most modern smartphones)\u003c\/p\u003e\n\u003cp\u003eDedicated wallet compartment\u003c\/p\u003e\n\u003cp\u003eBusiness card slots for quick access\u003c\/p\u003e\n\u003cp\u003ePencil \/ pen groove\u003c\/p\u003e\n\u003cp\u003eLower storage area for tools, small items, or accessories\u003c\/p\u003e\n\u003cp\u003eHigh-wall dividers keep everything from sliding around while driving\u003c\/p\u003e\n\u003cp\u003ePrecision engineered to fit the front section of the F-150 console\u003c\/p\u003e\n\u003cp\u003eClips directly onto the hanging folder rail without tools\u003c\/p\u003e\n\u003cp\u003e✔ Perfect For\u003c\/p\u003e\n\u003cp\u003eContractors\u003c\/p\u003e\n\u003cp\u003eBusiness owners\u003c\/p\u003e\n\u003cp\u003eWork trucks\u003c\/p\u003e\n\u003cp\u003eEveryday organization\u003c\/p\u003e\n\u003cp\u003eFleet vehicles\u003c\/p\u003e\n\u003cp\u003eKeep essentials within reach and eliminate console clutter.\u003c\/p\u003e\n\u003cp\u003e✔ Material \u0026amp; Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in automotive-grade ASA — durable, UV-resistant, heat-resistant, and perfect for interior car components.\u003c\/p\u003e\n\u003cp\u003eColor: Satin black (OEM-style finish)\u003c\/p\u003e\n\u003cp\u003e✔ Compatibility\u003c\/p\u003e\n\u003cp\u003eFits the FRONT tray area of:\u003c\/p\u003e\n\u003cp\u003eFord F-150 (2017–2020)\u003cbr\u003eWill not fit earlier years unless modified.\u003c\/p\u003e\n\u003cp\u003e✔ Installation\u003c\/p\u003e\n\u003cp\u003eNo tools required.\u003cbr\u003eSimply place the organizer into the console and clip it onto the existing hanging-folder rail.\u003c\/p\u003e\n\u003cp\u003e✔ Production \u0026amp; Shipping\u003c\/p\u003e\n\u003cp\u003eShips worldwide\u003c\/p\u003e\n\u003cp\u003eSecure packaging to avoid damage during transit\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1x Front Console Organizer Tray (F150)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497863852415,"sku":null,"price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/b73b6a85-il_fullxfull.7450724066_wgsw.jpg?v=1764533170"},{"product_id":"ford-focus-armrest-storage-shelf-3-versions-center-console-insert-organizer","title":"Ford Focus Armrest Storage Shelf — 3 Versions | Center Console Insert Organizer","description":"\u003cp\u003e🚗 Ford Focus Armrest Storage Shelf — 3 Versions | Center Console Insert Organizer\u003c\/p\u003e\n\u003cp\u003eUpgrade the storage space inside your Ford Focus armrest with this precision-made organizer shelf.\u003cbr\u003eDesigned to fit securely inside the armrest compartment and provide quick access to small everyday items without digging into the deep storage area.\u003c\/p\u003e\n\u003cp\u003ePerfect fit, clean look, and improved usability.\u003c\/p\u003e\n\u003cp\u003e✅ Compatible With\u003c\/p\u003e\n\u003cp\u003eFord Focus MK2 \/ MK2.5 \/ MK3 \/ MK3.5\u003cbr\u003e(Works for most models with the factory armrest storage compartment)\u003c\/p\u003e\n\u003cp\u003e📦 Available Versions (3 Models)\u003cbr\u003e✔ Version 01 — Standard Shelf\u003c\/p\u003e\n\u003cp\u003eSimple, clean organizer for everyday essentials.\u003cbr\u003eIdeal for keys, coins, business cards, small tools, charging cables, or earphones.\u003cbr\u003eMaintains deep storage space underneath.\u003c\/p\u003e\n\u003cp\u003e✔ Version 02 — Shelf With Pen Holder\u003c\/p\u003e\n\u003cp\u003eSame layout as Version 01 but includes a dedicated pen slot.\u003cbr\u003ePerfect for drivers who keep notes, work receipts, or paperwork in the car.\u003c\/p\u003e\n\u003cp\u003e✔ Version 03 — RS Logo Edition (Deep)\u003c\/p\u003e\n\u003cp\u003eEnhanced deeper version featuring the RS embossed design.\u003cbr\u003eGreat for RS owners looking for a stylish OEM-plus look while boosting storage usability.\u003c\/p\u003e\n\u003cp\u003e🧩 Features\u003c\/p\u003e\n\u003cp\u003eDrops directly into your factory armrest compartment\u003c\/p\u003e\n\u003cp\u003eNo modification needed\u003c\/p\u003e\n\u003cp\u003eKeeps small items accessible\u003c\/p\u003e\n\u003cp\u003ePrevents things from sinking into the deep storage area\u003c\/p\u003e\n\u003cp\u003eOptional pen-holder version\u003c\/p\u003e\n\u003cp\u003eRS logo variant for enthusiasts\u003c\/p\u003e\n\u003cp\u003eStrong and durable ASA construction\u003c\/p\u003e\n\u003cp\u003eDesigned for daily use\u003c\/p\u003e\n\u003cp\u003eEasy to clean and maintain\u003c\/p\u003e\n\u003cp\u003e🛠️ Material \u0026amp; Quality\u003c\/p\u003e\n\u003cp\u003ePrinted from ASA — a premium automotive-grade material:\u003c\/p\u003e\n\u003cp\u003eUV-resistant\u003c\/p\u003e\n\u003cp\u003eHeat-resistant (won’t deform in hot climates)\u003c\/p\u003e\n\u003cp\u003eDurable and rigid\u003c\/p\u003e\n\u003cp\u003ePerfect for OEM-style interior parts\u003c\/p\u003e\n\u003cp\u003e⚠️ For the most aesthetically perfect appearance, light sanding and painting is recommended.\u003cbr\u003eOur ASA parts already come high-quality and functional, but may show minor support-removal or surface print marks due to the nature of 3D printing.\u003c\/p\u003e\n\u003cp\u003e📏 Dimensions\u003c\/p\u003e\n\u003cp\u003eApprox.: 147 × 103 × 23 mm (varies slightly per version)\u003c\/p\u003e\n\u003cp\u003eFits the OEM armrest compartment perfectly.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003c\/p\u003e\n\u003cp\u003e1 × Armrest Shelf Insert (your selected version)\u003c\/p\u003e\n\u003cp\u003eNo tools required\u003c\/p\u003e\n\u003cp\u003eNo screws needed\u003c\/p\u003e\n\u003cp\u003e🌍 Worldwide Shipping\u003c\/p\u003e\n\u003cp\u003eAll items are made to order with high precision and carefully packaged.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Standard Shelf","offer_id":56497863885183,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"With Pen Holder","offer_id":56497863917951,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"RS Logo (Deep)","offer_id":56497863950719,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/671bcdfb-il_fullxfull.7450795546_pafl.jpg?v=1764533170"},{"product_id":"ford-explorer-ranger-single-din-stereo-trim-aftermarket-radio-mount","title":"Ford Explorer Ranger Single DIN Stereo Trim | Aftermarket Radio Mount |","description":"\u003cp\u003eFord Explorer Ranger Single DIN Stereo Trim | Aftermarket Radio Mount | Dash Panel With\/Without Switch Cutouts | 2 Versions\u003c\/p\u003e\n\u003cp\u003e📝 Description\u003cbr\u003eFord Explorer \/ Ranger Single DIN Stereo Trim — 2 Versions Available\u003c\/p\u003e\n\u003cp\u003eUpgrade your dashboard with this custom-designed Single DIN stereo trim for Ford Ranger and Ford Explorer, engineered to securely mount aftermarket head units while improving switch placement and overall interior layout.\u003c\/p\u003e\n\u003cp\u003eChoose between two configurations:\u003cbr\u003e1️⃣ Version A — No Switches (clean OEM-style look)\u003cbr\u003e2️⃣ Version B — With 3 Switch Cutouts (fits standard 20–22 mm automotive switches)\u003c\/p\u003e\n\u003cp\u003ePerfect for aftermarket radios, light switches, accessory controls, USB ports, and more.\u003c\/p\u003e\n\u003cp\u003e✔️ Product Features\u003c\/p\u003e\n\u003cp\u003ePrecise Fitment for Ford Ranger \/ Ford Explorer dashboards (see images).\u003c\/p\u003e\n\u003cp\u003eTwo Options:\u003cbr\u003e• Clean Single DIN frame\u003cbr\u003e• Single DIN frame with 3 integrated switch cutouts\u003c\/p\u003e\n\u003cp\u003eDirect Replacement for the original trim panel.\u003c\/p\u003e\n\u003cp\u003eSolid Construction: Printed in ASA for maximum heat resistance and durability inside hot vehicle cabins.\u003c\/p\u003e\n\u003cp\u003eImproved Mounting Points: Designed with correctly spaced hardware holes.\u003c\/p\u003e\n\u003cp\u003eSupports Most Aftermarket Radios (Pioneer, Kenwood, Alpine, Sony, etc.).\u003c\/p\u003e\n\u003cp\u003eEasy Installation: Uses standard screws; no modifications required.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1x Single DIN Stereo Trim Panel\u003c\/p\u003e\n\u003cp\u003eChoose:\u003cbr\u003e• No Switch Version\u003cbr\u003e• Switch Version (3 cutouts)\u003c\/p\u003e\n\u003cp\u003ePrinted in Black ASA.\u003c\/p\u003e\n\u003cp\u003e📘 Compatibility\u003c\/p\u003e\n\u003cp\u003eFits:\u003c\/p\u003e\n\u003cp\u003eFord Ranger (various years depending on region; see sample installation photos)\u003c\/p\u003e\n\u003cp\u003eFord Explorer with identical dash layout (3-switch panel under head unit)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e🛠 Recommended Switch Type (for the 3-switch version)\u003c\/p\u003e\n\u003cp\u003eFits common round automotive switches:\u003c\/p\u003e\n\u003cp\u003e12V accessory switches\u003c\/p\u003e\n\u003cp\u003eLight bar switches\u003c\/p\u003e\n\u003cp\u003eHeated seat switches\u003c\/p\u003e\n\u003cp\u003eUSB charger modules\u003c\/p\u003e\n\u003cp\u003e(Standard 20–22 mm round mounting holes)\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Quality\u003c\/p\u003e\n\u003cp\u003eAll parts are professionally printed using:\u003c\/p\u003e\n\u003cp\u003eASA automotive-grade polymer\u003c\/p\u003e\n\u003cp\u003eUV-resistant\u003c\/p\u003e\n\u003cp\u003eHeat-resistant (ideal for dashboards)\u003c\/p\u003e\n\u003cp\u003eHigh-strength infill\u003c\/p\u003e\n\u003cp\u003eClean surface finish\u003c\/p\u003e\n\u003cp\u003ePerfect for daily use, off-road vehicles, or motorhome\/RV conversions.\u003c\/p\u003e\n\u003cp\u003e🚚 Processing \u0026amp; Shipping\u003c\/p\u003e\n\u003cp\u003eWorldwide delivery with tracking\u003c\/p\u003e\n\u003cp\u003eSecure packaging\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis trim solves the issue mentioned by many owners —\u003cbr\u003eMetra kits often don’t fit well.\u003cbr\u003eThis one is a one-piece, reinforced solution with proper mounting geometry.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"No Switches","offer_id":56497863786879,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"Switch Cutouts","offer_id":56497863819647,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/cf340958-il_fullxfull.7450510594_r85l.jpg?v=1765068706"},{"product_id":"ford-e-450-e-350-dash-switch-plate-motorhome-rv-dashboard-panel","title":"Ford E-450 E-350 Dash Switch Plate | Motorhome RV Dashboard Panel |","description":"\u003cp\u003eFord E-450 E-350 Dash Switch Plate | Motorhome RV Dashboard Panel | Fits USB Charger, 12V Socket, Rocker Switches | ASA Upgrade\u003c\/p\u003e\n\u003cp\u003e📖 Description\u003c\/p\u003e\n\u003cp\u003eUpgrade the dashboard of your Ford E-450 \/ E-350 Motorhome or RV with this custom-designed dash switch plate, made to replace the small factory pocket with a clean, functional control panel.\u003c\/p\u003e\n\u003cp\u003eThis panel is engineered for RV owners who need additional switches, USB chargers, voltmeters, or 12V accessories — perfect for lighting systems, auxiliary power, battery monitors, and camper conversions.\u003c\/p\u003e\n\u003cp\u003ePrinted in automotive-grade ASA, it provides excellent heat resistance, UV resistance, and long-term durability inside motorhomes exposed to sun and heat.\u003c\/p\u003e\n\u003cp\u003e✨ Features\u003c\/p\u003e\n\u003cp\u003eDirect replacement for the factory pocket on Ford E-450 \/ E-350 dashboards\u003c\/p\u003e\n\u003cp\u003eFits model years commonly used in RV chassis\u003c\/p\u003e\n\u003cp\u003eHolds up to 4 standard rocker switches (Contura-style \/ Carling-style)\u003c\/p\u003e\n\u003cp\u003eOne side opening fits USB charger \/ voltmeter \/ 12V socket\u003c\/p\u003e\n\u003cp\u003eClean, OEM-style design with rounded edges\u003c\/p\u003e\n\u003cp\u003eUses small screws for mounting (same method as customers shared across the community)\u003c\/p\u003e\n\u003cp\u003eDesigned for tight RV dashboards with limited space\u003c\/p\u003e\n\u003cp\u003ePrinted in strong, UV-resistant ASA for automotive environments\u003c\/p\u003e\n\u003cp\u003eSmooth surface for OEM look, easy to paint if desired\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions\u003c\/p\u003e\n\u003cp\u003e201.6 × 61.9 × 3.5 mm\u003c\/p\u003e\n\u003cp\u003eFits most Ford E-Series RV dashboards including:\u003c\/p\u003e\n\u003cp\u003eFord E-450\u003c\/p\u003e\n\u003cp\u003eFord E-350\u003c\/p\u003e\n\u003cp\u003eMotorhome \/ RV chassis (Class C)\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eRemove the original small pocket from your dashboard.\u003c\/p\u003e\n\u003cp\u003eAlign the new plate in the same position.\u003c\/p\u003e\n\u003cp\u003eSecure using small black screws (not included).\u003c\/p\u003e\n\u003cp\u003eInstall your rocker switches, USB chargers, voltmeters, or 12V outlets.\u003c\/p\u003e\n\u003cp\u003eA perfect upgrade for RV owners who need organized control for added accessories.\u003c\/p\u003e\n\u003cp\u003e🎨 Material Options\u003c\/p\u003e\n\u003cp\u003eASA:\u003cbr\u003eUV-resistant, heat-resistant, long-lasting — perfect for hot RV interiors.\u003c\/p\u003e\n\u003cp\u003eDefault finish: matte black automotive texture\u003c\/p\u003e\n\u003cp\u003e📦 What You Get\u003c\/p\u003e\n\u003cp\u003e1× Ford E-450 \/ E-350 dash switch panel (fully printed, ready to install)\u003c\/p\u003e\n\u003cp\u003eYou are not buying electronics — switches, gauges, USB chargers are shown for demonstration only.\u003c\/p\u003e\n\u003cp\u003e🚚 Shipping \u0026amp; Production\u003c\/p\u003e\n\u003cp\u003eWorldwide shipping\u003c\/p\u003e\n\u003cp\u003eSafe packaging to avoid warping or damage\u003c\/p\u003e\n\u003cp\u003eTracking number included\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497863983487,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/f4aabcf5-il_fullxfull.7498369983_g4wy.jpg?v=1764533171"},{"product_id":"ford-focus-mk2-mk2-5-center-console-storage-organizer-insert-2-versions","title":"Ford Focus MK2 MK2.5 Center Console Storage Organizer Insert – 2 Versions","description":"\u003cp\u003eFord Focus MK2 MK2.5 Center Console Storage Organizer Insert – 2 Versions\u003c\/p\u003e\n\u003cp\u003e📄 Description\u003c\/p\u003e\n\u003cp\u003eUpgrade the interior storage of your Ford Focus MK2 \/ MK2.5 with this custom-fit center console organizer insert.\u003cbr\u003eDesigned specifically for models 2005–2011, this organizer transforms the shallow, unused tray into a practical and structured storage compartment.\u003c\/p\u003e\n\u003cp\u003eChoose from two versions, depending on your setup and needs:\u003c\/p\u003e\n\u003cp\u003e✔ Version 1 — Clean Organizer\u003c\/p\u003e\n\u003cp\u003eA simple, open-style compartment:\u003c\/p\u003e\n\u003cp\u003ePerfect for keys, coins, cards, parking tokens, USB sticks, small accessories\u003c\/p\u003e\n\u003cp\u003eSmooth internal shape for easy cleaning\u003c\/p\u003e\n\u003cp\u003eMaximizes usable space without modifying your console\u003c\/p\u003e\n\u003cp\u003e✔ Version 2 — Organizer + Switch Panel\u003c\/p\u003e\n\u003cp\u003eIdeal for drivers who installed aftermarket functions:\u003c\/p\u003e\n\u003cp\u003eTwo integrated 20 mm holes for auxiliary switches (popular use: retrofit heated seat switches)\u003c\/p\u003e\n\u003cp\u003eIncludes slots for better wire routing and airflow\u003c\/p\u003e\n\u003cp\u003eStill provides a useful storage area for everyday items\u003c\/p\u003e\n\u003cp\u003eClean, OEM-style look once installed\u003c\/p\u003e\n\u003cp\u003e📌 Fitment\u003c\/p\u003e\n\u003cp\u003eDesigned for:\u003c\/p\u003e\n\u003cp\u003eFord Focus MK2 (2005–2007)\u003c\/p\u003e\n\u003cp\u003eFord Focus MK2.5 facelift (2008–2011)\u003cbr\u003eIncluding:\u003c\/p\u003e\n\u003cp\u003eHatchback\u003c\/p\u003e\n\u003cp\u003eSedan\u003c\/p\u003e\n\u003cp\u003eWagon \/ Estate\u003c\/p\u003e\n\u003cp\u003eST225 interior also compatible\u003c\/p\u003e\n\u003cp\u003eThis insert fits directly into the factory center console tray.\u003c\/p\u003e\n\u003cp\u003e📦 Installation\u003c\/p\u003e\n\u003cp\u003eDrop-in fit — no cutting or tools required\u003c\/p\u003e\n\u003cp\u003eVersion 2 may require routing wires if switches are used\u003c\/p\u003e\n\u003cp\u003eSwitches \u0026amp; rubber padding not included\u003c\/p\u003e\n\u003cp\u003e🛠 Material \u0026amp; Finish \u003c\/p\u003e\n\u003cp\u003eMade from durable automotive-grade polymer with high heat resistance — ideal for interior use in warm climates.\u003c\/p\u003e\n\u003cp\u003eAs with any custom part, for the most aesthetically perfect finish, we recommend lightly sanding and painting.\u003cbr\u003eHowever, the surface quality is already high and does not require finishing to be used.\u003cbr\u003eMinor signs from support removal may be present.\u003c\/p\u003e\n\u003cp\u003e🎁 What You Receive\u003c\/p\u003e\n\u003cp\u003eYou will receive one organizer insert, in the version you select:\u003c\/p\u003e\n\u003cp\u003eOptions:\u003c\/p\u003e\n\u003cp\u003eVersion 1 — Simple Organizer\u003c\/p\u003e\n\u003cp\u003eVersion 2 — Organizer + 2 Switch Holes (20 mm)\u003c\/p\u003e\n\u003cp\u003e⚠ Notes\u003c\/p\u003e\n\u003cp\u003eAccessories, switches, rubber mats not included\u003c\/p\u003e\n\u003cp\u003eColor: black\u003c\/p\u003e\n\u003cp\u003eNo modifications to your console required\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Simple Organizer","offer_id":56497864147327,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"Organizer Holes 20mm","offer_id":56497864180095,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/8eb5ee45-il_fullxfull.7450372202_25gl.jpg?v=1764533169"},{"product_id":"ford-fiesta-st-dead-pedal-footrest-plate-replacement-6th-gen-fiesta-mk7-mk7-5","title":"Ford Fiesta ST Dead Pedal | Footrest Plate Replacement | 6th Gen Fiesta MK7 MK7.5","description":"\u003cp\u003eFord Fiesta ST Dead Pedal | Footrest Plate Replacement | 6th Gen Fiesta MK7 MK7.5 | Durable Interior Upgrade | \u003c\/p\u003e\n\u003cp\u003eUpgrade the feel and comfort of your Ford Fiesta ST (6th generation – MK7 \u0026amp; MK7.5) with this precision-designed dead pedal \/ footrest replacement.\u003cbr\u003eThis part replaces the factory insert that commonly wears out or goes missing, giving your driver footwell a clean, OEM-plus appearance and improved grip.\u003c\/p\u003e\n\u003cp\u003eMade to fit perfectly into the original recessed area, with the correct angled profile and ribbed top surface for maximum traction while driving.\u003c\/p\u003e\n\u003cp\u003e✨ Features\u003c\/p\u003e\n\u003cp\u003eDirect fit for 6th generation Ford Fiesta \/ Fiesta ST (MK7, MK7.5)\u003c\/p\u003e\n\u003cp\u003eOEM-style ribbed texture for secure foot grip\u003c\/p\u003e\n\u003cp\u003eStrong \u0026amp; durable ASA construction (heat-resistant, UV-safe, ideal for car interiors)\u003c\/p\u003e\n\u003cp\u003eLightweight, sturdy, and long-lasting\u003c\/p\u003e\n\u003cp\u003eMatches interior design without looking aftermarket\u003c\/p\u003e\n\u003cp\u003eInstalls in seconds — simply place into the factory slot\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e📌 Fitment\u003c\/p\u003e\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cp\u003eFord Fiesta 2008-2017 (MK7 \/ MK7.5)\u003c\/p\u003e\n\u003cp\u003eFord Fiesta ST 2013-2017\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e🎨 Finish \u0026amp; Quality Notes\u003c\/p\u003e\n\u003cp\u003eAll parts are printed in high-quality ASA, ideal for car interiors.\u003cbr\u003eSurface finish is excellent, but as with any printed part:\u003c\/p\u003e\n\u003cp\u003eFor the most aesthetically perfect look, we recommend lightly sanding and optionally painting.\u003cbr\u003eOur parts do not require post-processing, but may show minor support removal marks or standard print texture.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Ford Fiesta ST Dead Pedal Replacement\u003c\/p\u003e\n\u003cp\u003ePacked securely for safe worldwide shipping\u003c\/p\u003e\n\u003cp\u003e🌍 Shipping\u003c\/p\u003e\n\u003cp\u003eWorldwide shipping available.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497864081791,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/36e7e032-il_fullxfull.7450313298_710p.jpg?v=1765068393"},{"product_id":"ford-dash-gauge-pod-switch-panel-blank-3-versions","title":"Ford Dash Gauge Pod \/ Switch Panel \/ Blank – 3 Versions","description":"\u003cp\u003eFord Dash Gauge Pod \/ Switch Panel Pod \/ Blank Pod – 3 Versions – For Ford OBS, Ranger, F-Series – ASA Custom Dash Mount – 52mm Gauge Holder – Off-Road Switch Pod\u003c\/p\u003e\n\u003cp\u003eMUD STUFF POD – custom dash pod for Ford trucks (3 versions available):\u003cbr\u003e• Gauge Pod (3× 52 mm gauges)\u003cbr\u003e• Switch Pod (large rectangular cutout)\u003cbr\u003e• Blank Pod (solid shell with Ford logo)\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for older Ford dashboards, OBS trucks, Ranger, F-Series and many off-road builds. Perfect for adding boost gauges, AFR, oil temp, water temp, USB ports, rocker switches, toggle panels, radios, compressors, lighting switches and more.\u003c\/p\u003e\n\u003cp\u003e✔ Printed in high-temperature ASA\u003cbr\u003e✔ OEM-style smooth surface\u003cbr\u003e✔ Rigid and durable\u003cbr\u003e✔ Sun\/UV\/heat resistant\u003cbr\u003e✔ Bolt-on or 3M tape install\u003cbr\u003e✔ Clean fit and angle optimized for driver view\u003c\/p\u003e\n\u003cp\u003eMaterial: ASA automotive-grade\u003cbr\u003eFinish: matte OEM-like texture\u003cbr\u003eFitment: Ford OBS, Ford Ranger, Ford F-Series, and other dashboards with a flat mounting zone. Message me if you want me to verify compatibility.\u003c\/p\u003e\n\u003cp\u003eGauge Pod Version:\u003cbr\u003e– Fits 3 standard 52 mm gauges\u003cbr\u003e– No vibration design\u003cbr\u003e– Smooth aerodynamic housing\u003c\/p\u003e\n\u003cp\u003eSwitch Pod Version:\u003cbr\u003e– Fits universal accessory switch panels\u003cbr\u003e– Perfect for off-road lighting, lockers, winch controls, radios, USB chargers, etc.\u003c\/p\u003e\n\u003cp\u003eBlank Pod Version:\u003cbr\u003e– Fully solid front\u003cbr\u003e– Includes Ford logo embossing\u003cbr\u003e– For custom cutouts or unique projects (screen, GPS, DIY buttons)\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003eMounts using two screws or strong 3M VHB tape. Very simple and secure.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Blank","offer_id":56497864343935,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true},{"title":"Switch Pod","offer_id":56497864376703,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true},{"title":"Gauge Pod","offer_id":56497864409471,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/6f17ec53-il_fullxfull.7450096034_hfp8.jpg?v=1764533174"},{"product_id":"ford-obs-driver-door-switch-panel-1987-1997-with-without-electric-window-switch-slot","title":"Ford OBS Driver Door Switch Panel 1987–1997 – With\/Without Electric Window Switch Slot","description":"\u003cp\u003eFord OBS Driver Door Switch Panel 1987–1997 – With\/Without Electric Window Switch Slot\u003c\/p\u003e\n\u003cp\u003eUpgrade your classic Ford OBS interior with this precision-made replacement driver door switch panel — designed specifically for 1987–1997 Ford F-Series \u0026amp; Bronco (Crew Cab, Extended Cab, Single Cab) trucks.\u003c\/p\u003e\n\u003cp\u003eThis part replaces the original brittle plastic bezel on the driver’s door.\u003cbr\u003eAvailable in two versions, depending on your truck’s configuration.\u003c\/p\u003e\n\u003cp\u003e✔ Available Versions\u003cbr\u003e🔹 Version A — With Electric Window Switch Slot\u003c\/p\u003e\n\u003cp\u003eIncludes an additional cutout to mount the electric window switch.\u003cbr\u003ePerfect for trucks that were converted to power windows or came equipped with them.\u003c\/p\u003e\n\u003cp\u003e🔹 Version B — Standard (No Electric Window Switch Slot)\u003c\/p\u003e\n\u003cp\u003eOEM-style blank version for trucks with manual windows.\u003cbr\u003eMatches original layout and mounting points.\u003c\/p\u003e\n\u003cp\u003e✔ Fitment\u003c\/p\u003e\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cp\u003eFord F150 \/ F250 \/ F350 — 1987–1997\u003c\/p\u003e\n\u003cp\u003eFord Bronco — 1987–1996\u003c\/p\u003e\n\u003cp\u003eCrew Cab, Extended Cab, Regular Cab\u003c\/p\u003e\n\u003cp\u003eOBS (“Old Body Style”) platform\u003c\/p\u003e\n\u003cp\u003eDesigned based on OEM dimensions and community measurements\u003c\/p\u003e\n\u003cp\u003e✔ Product Details\u003c\/p\u003e\n\u003cp\u003eHigh-precision printed part\u003c\/p\u003e\n\u003cp\u003eDurable automotive-grade ABS\/ASA\u003c\/p\u003e\n\u003cp\u003eDesigned to fit using the same factory mounting points\u003c\/p\u003e\n\u003cp\u003eDirect replacement for broken or missing switch bezels\u003c\/p\u003e\n\u003cp\u003e⚠ Hardware is not included — reuse your factory screws.\u003c\/p\u003e\n\u003cp\u003e✔ Surface Finish Recommendation\u003c\/p\u003e\n\u003cp\u003eOur parts print with high quality, but for the most aesthetic, OEM-like finish, we recommend:\u003c\/p\u003e\n\u003cp\u003elightly sanding (fine grit)\u003c\/p\u003e\n\u003cp\u003eoptional plastic primer + paint\u003c\/p\u003e\n\u003cp\u003eThe part is fully usable as-is.\u003cbr\u003eMinor marks from support removal or printing may be present — normal for 3D-manufactured components.\u003c\/p\u003e\n\u003cp\u003e📦 What You Get\u003c\/p\u003e\n\u003cp\u003e1× Driver Door Switch Panel (choose version)\u003c\/p\u003e\n\u003cp\u003ePrinted in tough ASA for UV and heat resistance\u003c\/p\u003e\n\u003cp\u003eReady to install immediately\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions\u003c\/p\u003e\n\u003cp\u003e235.95 × 75.14 × 18.99 mm\u003cbr\u003eFits stock door pocket recess perfectly.\u003c\/p\u003e\n\u003cp\u003e⭐ Why Choose This Version?\u003c\/p\u003e\n\u003cp\u003eStronger and less brittle than old OEM plastic\u003c\/p\u003e\n\u003cp\u003eMatches factory geometry\u003c\/p\u003e\n\u003cp\u003eDesigned based on real OBS trucks\u003c\/p\u003e\n\u003cp\u003ePerfect for interior restorations, conversions, or modernizing classic trucks\u003c\/p\u003e\n\u003cp\u003e🔧 Installation Notes\u003c\/p\u003e\n\u003cp\u003eReuse OEM screws\u003c\/p\u003e\n\u003cp\u003ePanel snaps\/bolts to the same mounting holes\u003c\/p\u003e\n\u003cp\u003eIf your door panel has slight warp (common on OBS), warm the bezel gently with a heat gun so it conforms perfectly\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Yes","offer_id":56497864278399,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"No","offer_id":56497864311167,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/24f32b64-il_fullxfull.7450010998_1ecs.jpg?v=1765068296"},{"product_id":"ford-ranger-removable-cupholder-fits-1998-2003-60-40-seats","title":"Ford Ranger Removable Cupholder – Fits 1998–2003 (60\/40 Seats)","description":"\u003cp\u003e🛠 Ford Ranger Removable Cupholder – Fits 1998–2003 (60\/40 Seats) | Stable, Deep, Multi-Size Inserts\u003c\/p\u003e\n\u003cp\u003eUpgrade the unusable factory cupholder area of your early Ford Ranger.\u003cbr\u003eThis removable cupholder fits perfectly into the notch between the 60\/40 seats (1998–2003 models) and provides stable, deep, rattle-free storage for bottles, mugs, tumblers, and small accessories.\u003c\/p\u003e\n\u003cp\u003eDesigned with proper depth, smooth rounded edges, and optional inserts for smaller cups — so everything stays in place even on rough roads.\u003c\/p\u003e\n\u003cp\u003e⭐ Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Ford Ranger 1998–2003 with 60\/40 front bench seats\u003cbr\u003e✔ Drops into the factory notch — no drilling, no fasteners\u003cbr\u003e✔ Works with most factory \u0026amp; aftermarket seat covers\u003cbr\u003e✔ Stays firmly in place due to shape + vehicle geometry\u003c\/p\u003e\n\u003cp\u003e🧃 Fits Popular Bottles \u0026amp; Mugs\u003c\/p\u003e\n\u003cp\u003eThe large and medium cup rings support many common sizes, including:\u003c\/p\u003e\n\u003cp\u003eHydroFlask 40oz \/ 32oz\u003c\/p\u003e\n\u003cp\u003eYeti Rambler 10oz \/ 14oz \/ 20oz\u003c\/p\u003e\n\u003cp\u003eStarbucks tall \u0026amp; grande cups\u003c\/p\u003e\n\u003cp\u003eTrader Joe’s 1.25L sparkling water bottle\u003c\/p\u003e\n\u003cp\u003eStandard coffee mugs\u003c\/p\u003e\n\u003cp\u003eSlim tumblers\u003c\/p\u003e\n\u003cp\u003eSports bottles\u003c\/p\u003e\n\u003cp\u003eSmall condiment bottles (Tajin, Tabasco)\u003c\/p\u003e\n\u003cp\u003eEssential oil vials\u003c\/p\u003e\n\u003cp\u003eMini-items (gum, chapstick, etc.)\u003c\/p\u003e\n\u003cp\u003eIncludes a small-size insert you can place into the cup ring for narrow cups.\u003c\/p\u003e\n\u003cp\u003e🧩 Features\u003c\/p\u003e\n\u003cp\u003eDeep cup pockets prevent tipping\u003c\/p\u003e\n\u003cp\u003eRemovable small insert for thin bottles\u003c\/p\u003e\n\u003cp\u003eRaised edges reduce spills\u003c\/p\u003e\n\u003cp\u003eExtra small slots for pens, snacks, mini bottles\u003c\/p\u003e\n\u003cp\u003eSmooth ergonomic shape that matches the floor contours\u003c\/p\u003e\n\u003cp\u003eRemovable \/ washable design\u003c\/p\u003e\n\u003cp\u003eOne-piece construction (cup insert separate)\u003c\/p\u003e\n\u003cp\u003eStable without screws or glue\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions\u003c\/p\u003e\n\u003cp\u003eMain unit: 208 × 190 × 50 mm\u003cbr\u003eInsert: 93 × 93 × 46 mm\u003c\/p\u003e\n\u003cp\u003e🎨 Material \u0026amp; Finish\u003c\/p\u003e\n\u003cp\u003eMade from high-quality ASA for durability, UV resistance, and stability in hot climates.\u003c\/p\u003e\n\u003cp\u003eImportant:\u003cbr\u003eFor the most aesthetic result, we recommend lightly sanding and painting.\u003cbr\u003eOur parts have excellent print quality and do not require finishing, but may show minor support or layer marks typical for FDM printing.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003c\/p\u003e\n\u003cp\u003eYou will receive:\u003cbr\u003e✔ 1× Ford Ranger removable cupholder\u003cbr\u003e✔ 1× Narrow-cup insert\u003c\/p\u003e\n\u003cp\u003eBolts, screws or extras are NOT required or included.\u003c\/p\u003e\n\u003cp\u003e📌 Notes\u003c\/p\u003e\n\u003cp\u003eThis is NOT a universal cupholder — it is shaped specifically for Ford Ranger 1998–2003 60\/40 seats.\u003c\/p\u003e\n\u003cp\u003eWill NOT fit consoles with aftermarket vaults unless measured.\u003c\/p\u003e\n\u003cp\u003eSome Rangers may have slight cabin shape differences; this design follows OEM geometry.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497864573311,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/98a27a01-il_fullxfull.7497848587_suml.jpg?v=1765068151"},{"product_id":"ford-maverick-center-console-tray-organizer-3-style-options-fits-2022-2024-maverick","title":"Ford Maverick Center Console Tray Organizer | 3 Style Options | Fits 2022-2024 Maverick","description":"\u003cp\u003eFord Maverick Center Console Tray Organizer | 3 Style Options | Fits 2022-2024 Maverick\u003c\/p\u003e\n\u003cp\u003eUpgrade the practicality of your Ford Maverick interior with this custom-fit center console organizer tray, designed to perfectly fit the upper console compartment on all 2022–2024 Ford Maverick models.\u003c\/p\u003e\n\u003cp\u003eThis insert solves the problem Maverick owners constantly mention — wasted space and poor organization. Now everything has its own place: pens, mints, sunglasses, napkins, coins, small gadgets, keys, and more.\u003c\/p\u003e\n\u003cp\u003e✨ Three Variations Available\u003c\/p\u003e\n\u003cp\u003eChoose the perfect tray layout depending on how you use your Maverick:\u003c\/p\u003e\n\u003cp\u003e✔ Version 01 — Honeycomb Bottom (Lightweight + Fast Drying)\u003c\/p\u003e\n\u003cp\u003eSame geometry as stock-style tray but with a honeycomb floor\u003c\/p\u003e\n\u003cp\u003eReduces weight, allows debris and moisture to fall through\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e✔ Version 02 — Standard Flat Bottom\u003c\/p\u003e\n\u003cp\u003eClassic version with a smooth bottom\u003c\/p\u003e\n\u003cp\u003eStrong, durable, ideal for holding smaller items\u003c\/p\u003e\n\u003cp\u003eEasy to clean\u003c\/p\u003e\n\u003cp\u003e✔ Version 03 — Deep Utility Tray\u003c\/p\u003e\n\u003cp\u003eAdditional depth for bulkier items\u003c\/p\u003e\n\u003cp\u003ePerfect for napkins, sanitizer bottles, mints containers, charging accessories\u003c\/p\u003e\n\u003cp\u003eMaximizes every millimeter of console space\u003c\/p\u003e\n\u003cp\u003e📏 Fitment\u003c\/p\u003e\n\u003cp\u003e✓ Fits Ford Maverick 2022, 2023, 2024\u003cbr\u003e✓ Designed specifically for the top section of the center console under the lid\u003cbr\u003e✓ Uses the small rear slope of the console to hold the tray securely in position\u003c\/p\u003e\n\u003cp\u003e🧩 Important Notes\u003c\/p\u003e\n\u003cp\u003eThe Maverick center console is not perfectly square from the factory — this design accounts for that.\u003c\/p\u003e\n\u003cp\u003eIf your console has slight shape variations, warming the tray with a heat gun for 10–15 seconds and letting it cool in place ensures a perfect molded fit (confirmed solution by multiple owners).\u003c\/p\u003e\n\u003cp\u003eNo hardware required — drop-in installation.\u003c\/p\u003e\n\u003cp\u003e🛠 Materials \u0026amp; Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA — automotive-grade, UV-resistant, heat-resistant, impact-resistant.\u003cbr\u003ePerfect for vehicles exposed to sun, heat, or extreme climates.\u003c\/p\u003e\n\u003cp\u003eLike any printed part, the tray may have minor signs of support removal or typical 3D print texture.\u003cbr\u003eFor a premium aesthetic finish, we recommend:\u003c\/p\u003e\n\u003cp\u003elightly sanding\u003c\/p\u003e\n\u003cp\u003eoptionally painting in your preferred color\u003c\/p\u003e\n\u003cp\u003eHowever, the item arrives fully functional and high-quality out of the box.\u003c\/p\u003e\n\u003cp\u003e📦 What You Get\u003c\/p\u003e\n\u003cp\u003e1× Ford Maverick Center Console Tray (your chosen variation)\u003c\/p\u003e\n\u003cp\u003ePerfect fit, no tools required\u003c\/p\u003e\n\u003cp\u003e👍 Why This Tray?\u003c\/p\u003e\n\u003cp\u003e✔ Tested by many Maverick owners — proven fit\u003cbr\u003e✔ Great solution for everyday carry items\u003cbr\u003e✔ Prevents clutter\u003cbr\u003e✔ Looks OEM-plus\u003cbr\u003e✔ Durable and stable — no sliding around\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Honeycomb","offer_id":56497864638847,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true},{"title":"Flat Bottom","offer_id":56497864671615,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true},{"title":"Deep Utility Tray","offer_id":56497864704383,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/ef57de4f-il_fullxfull.7447326430_ggfx.jpg?v=1765068100"},{"product_id":"ford-ranger-cup-holder-organizer-front-console-storage-system","title":"Ford Ranger Cup Holder Organizer | Front Console Storage System","description":"\u003cp\u003eFord Ranger Cup Holder Organizer | Front Console Storage System | Sunglasses \u0026amp; Accessories Tray | Fits T7 \u0026amp; Similar Models\u003c\/p\u003e\n\u003cp\u003eDescription\u003c\/p\u003e\n\u003cp\u003eUpgrade the practicality of your Ford Ranger’s front console with this custom multi-section organizer system.\u003cbr\u003eDesigned specifically for Ford Ranger T7 and similar interiors, it transforms the factory cup holder area into a smart, organized storage space.\u003c\/p\u003e\n\u003cp\u003eAll parts install easily and integrate seamlessly with the original layout — no vehicle modification required.\u003c\/p\u003e\n\u003cp\u003eWhy This Organizer System Is Better\u003c\/p\u003e\n\u003cp\u003e✔ Perfect fit for Ford Ranger T7 (and similar layouts)\u003cbr\u003e✔ Adds real usable storage in an area that normally wastes space\u003cbr\u003e✔ Two dedicated cylindrical holders for glasses, cans, or small bottles\u003cbr\u003e✔ Side tray ideal for pens, notes, keys, tickets, coins, etc.\u003cbr\u003e✔ Optional post-it holder rail (depending on version)\u003cbr\u003e✔ Optional felt padding recommended for softer contact (not included)\u003c\/p\u003e\n\u003cp\u003eVersions Available\u003c\/p\u003e\n\u003cp\u003eChoose the configuration that fits your needs:\u003c\/p\u003e\n\u003cp\u003e01 — Dual Cylinder Inserts\u003c\/p\u003e\n\u003cp\u003eTwo strong, stable cylindrical holders for sunglasses, small bottles, sanitizer, or compact accessories.\u003cbr\u003eDesigned to drop directly into the OEM cup holder without any modification.\u003c\/p\u003e\n\u003cp\u003e02 — Side Utility Tray\u003c\/p\u003e\n\u003cp\u003eSlim side-mounted tray rail that attaches next to the organizer.\u003cbr\u003ePerfect for pens, parking tickets, notes, toll receipts, or quick-access tools.\u003c\/p\u003e\n\u003cp\u003e03 — Full Organizer Base\u003c\/p\u003e\n\u003cp\u003eA complete multi-compartment tray with:\u003cbr\u003e• Dual cylinder holders\u003cbr\u003e• Square pocket for small items\u003cbr\u003e• Front storage area for everyday carry items\u003c\/p\u003e\n\u003cp\u003e04 — Post-It \/ Notepad Holder\u003c\/p\u003e\n\u003cp\u003eA small front attachment that securely holds sticky notes or a notepad.\u003cbr\u003eFits directly into the front recess of the organizer system.\u003c\/p\u003e\n\u003cp\u003eImportant Notes\u003c\/p\u003e\n\u003cp\u003e• Felt pads are recommended for interior softness but are not included\u003cbr\u003e• All parts are sturdy, high-quality and ready to use\u003cbr\u003e• For the most aesthetic finish, a light sanding and optional painting may be done — however, the quality is high out of the box. Minor marks from support removal or printing patterns may be present.\u003c\/p\u003e\n\u003cp\u003eCompatibility\u003c\/p\u003e\n\u003cp\u003e• Ford Ranger T7\u003cbr\u003e• Older Ranger models with identical front cup holder layout\u003cbr\u003e• May also fit aftermarket console layouts with similar dimensions\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhat’s Included\u003c\/p\u003e\n\u003cp\u003e• Cylinder holders\u003cbr\u003e• Side tray\u003cbr\u003e• Full organizer base\u003cbr\u003e• Optional notepad holder\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePerfect For\u003c\/p\u003e\n\u003cp\u003e• Sunglasses\u003cbr\u003e• Snacks\u003cbr\u003e• Coins\u003cbr\u003e• Wallet\u003cbr\u003e• Keys\u003cbr\u003e• Parking tickets\u003cbr\u003e• Tools\u003cbr\u003e• Work accessories\u003cbr\u003e• Charging cables \u0026amp; adapters\u003cbr\u003e• Pens \/ notebooks\u003cbr\u003e• Everyday carry items\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497864606079,"sku":null,"price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/f8710487-il_fullxfull.7495181285_8bnu.jpg?v=1765068040"},{"product_id":"ford-focus-center-console-tray-insert-extra-storage-organizer-for-middle-console","title":"Ford Focus Center Console Tray Insert | Extra Storage Organizer for Middle Console","description":"\u003cp\u003eFord Focus Center Console Tray Insert | 2012–2018 | Extra Storage Organizer for Middle Console | Car Interior Upgrade\u003c\/p\u003e\n\u003cp\u003eUpgrade the usability of your Ford Focus interior with this custom center console organizer tray — designed for the 2012 Ford Focus and all models with the same middle console layout.\u003cbr\u003ePerfect for adding practical storage where Ford should have included it from the factory.\u003c\/p\u003e\n\u003cp\u003eThis tray drops directly into the center console compartment, giving you a clean, organized space for everyday items such as keys, coins, cards, chargers, cables, or sunglasses.\u003c\/p\u003e\n\u003cp\u003eWhy this design is improved\u003c\/p\u003e\n\u003cp\u003eThe “Ford” logo removed from the model to avoid trademark issues — and honestly, the plain smooth surface looks even better in the car.\u003cbr\u003eThe clean finish blends seamlessly with the OEM interior while adding functional vertical walls that prevent items from sliding around.\u003c\/p\u003e\n\u003cp\u003eFitment\u003c\/p\u003e\n\u003cp\u003e✔ Ford Focus 2012\u003cbr\u003e✔ Compatible with models that share the same center console insert shape\u003cbr\u003e(If your compartment looks like the photos — it fits.)\u003c\/p\u003e\n\u003cp\u003eItem Details\u003c\/p\u003e\n\u003cp\u003eDesigned for perfect drop-in fit\u003c\/p\u003e\n\u003cp\u003eSmooth interior walls for easy cleaning\u003c\/p\u003e\n\u003cp\u003eStrong, durable automotive-grade ASA (default)\u003c\/p\u003e\n\u003cp\u003eHelps eliminate clutter inside the center console\u003c\/p\u003e\n\u003cp\u003eOEM-like appearance that matches interior plastics\u003c\/p\u003e\n\u003cp\u003eRecommended Finishing\u003c\/p\u003e\n\u003cp\u003eOur parts come clean and ready to use.\u003cbr\u003eHowever, for the most aesthetically perfect result, we recommend light sanding and optional painting.\u003cbr\u003eThe print may have minimal signs of support removal (normal for precision prints), but nothing that affects function or looks inside the console.\u003c\/p\u003e\n\u003cp\u003eWhat’s included\u003c\/p\u003e\n\u003cp\u003e1x Center Console Tray (color: black)\u003c\/p\u003e\n\u003cp\u003eNo branding, no logos — clean OEM look\u003c\/p\u003e\n\u003cp\u003eNo tools or hardware required — drop-in installation\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497864540543,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/77fb4662-il_fullxfull.7495137859_8oun.jpg?v=1765067987"},{"product_id":"ford-transit-2001-2007-vent-gauge-mount-replacement","title":"Ford Transit (2001–2007) Vent Gauge Mount Replacement","description":"\u003cp\u003eFord Transit (2001–2007) Vent Gauge Mount – Gauge Pod Vent Replacement\u003c\/p\u003e\n\u003cp\u003eUpgrade the unused factory vent in your Ford Transit Mk6\/Mk7 (2001–2007) with a functional 52 mm (2-inch) gauge mount.\u003cbr\u003ePerfect for volt meters, boost gauges, AFR gauges, oil temp\/pressure gauges and other 52 mm instruments.\u003c\/p\u003e\n\u003cp\u003eThis insert replaces the original ventilation cover and provides a clean, OEM-looking location for your gauge — without drilling the dashboard.\u003c\/p\u003e\n\u003cp\u003e✔ Features\u003cbr\u003e• Direct fit for Ford Transit 2001–2007\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the square vent section shown in the photos. Locks into place using the original vent frame.\u003c\/p\u003e\n\u003cp\u003e• Fits any standard 52 mm gauge\u003c\/p\u003e\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cp\u003evolt gauges\u003c\/p\u003e\n\u003cp\u003eboost \/ turbo gauges\u003c\/p\u003e\n\u003cp\u003eAFR \/ wideband\u003c\/p\u003e\n\u003cp\u003eoil pressure \u0026amp; oil temp\u003c\/p\u003e\n\u003cp\u003ewater temp\u003c\/p\u003e\n\u003cp\u003eany 52 mm round aftermarket gauge\u003c\/p\u003e\n\u003cp\u003eInternal seat diameter: 52 mm\u003cbr\u003eOverall module size (from model): 60 × 102 × 30 mm\u003c\/p\u003e\n\u003cp\u003e• Clean OEM-style look\u003c\/p\u003e\n\u003cp\u003eThe mount preserves the interior style — no drilling, no cutting.\u003c\/p\u003e\n\u003cp\u003e• Wire pass-through ready\u003c\/p\u003e\n\u003cp\u003eBuilt-in opening on the back for wiring, making installation simple and tidy.\u003c\/p\u003e\n\u003cp\u003e• Sturdy \u0026amp; durable\u003c\/p\u003e\n\u003cp\u003ePrinted from strong ASA, able to withstand sun, heat, and vibration inside the dashboard.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003c\/p\u003e\n\u003cp\u003e1 × Vent Gauge Mount (52 mm)\u003c\/p\u003e\n\u003cp\u003e❗ Not included\u003c\/p\u003e\n\u003cp\u003eGauge\u003c\/p\u003e\n\u003cp\u003eScrews (not required)\u003c\/p\u003e\n\u003cp\u003eWiring\u003c\/p\u003e\n\u003cp\u003eVent frame\u003c\/p\u003e\n\u003cp\u003eThe part simply snaps into the existing factory vent opening.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eRemove the stock Transit vent cover.\u003c\/p\u003e\n\u003cp\u003eRoute your gauge wires through the hole on the back of the mount.\u003c\/p\u003e\n\u003cp\u003ePress the mount into the vent frame until it locks into position.\u003c\/p\u003e\n\u003cp\u003eInsert your 52 mm gauge.\u003c\/p\u003e\n\u003cp\u003eConnect wiring according to your gauge instructions.\u003c\/p\u003e\n\u003cp\u003e🎨 Surface finish\u003c\/p\u003e\n\u003cp\u003eOur prints have high quality, but minor artifacts or support marks may be visible due to the nature of manufacturing.\u003cbr\u003eFor the most aesthetic result, we recommend:\u003c\/p\u003e\n\u003cp\u003elight sanding\u003c\/p\u003e\n\u003cp\u003eoptional primer + paint (if you want a factory-plastic finish)\u003c\/p\u003e\n\u003cp\u003eEven without extra finishing, the part looks great and functions perfectly.\u003c\/p\u003e\n\u003cp\u003e🛠 Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Ford Transit Mk6 (2001–2006)\u003cbr\u003e✔ Ford Transit Mk7 (2006–2013 early models that kept the same vent shape)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497864507775,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/181a254a-il_fullxfull.7495109549_nsm2.jpg?v=1765067927"},{"product_id":"ford-f150-console-tray-organizer-insert","title":"Ford F150 Console Tray Organizer Insert","description":"\u003cp\u003eFord F150 Console Tray Organizer Insert\u003c\/p\u003e\n\u003cp\u003eUpgrade the center console of your Ford F150 and finally make use of the useless card\/coin slot — this tray is exactly what should have been there from factory.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the 2004 F150 (works on 2004–2006 models with the same console), it transforms the shallow compartment into a functional organizer: keys, coins, AirPods, vape, wallet, charging adapters, USB drives, pocket knife, etc.\u003cbr\u003eNo drilling. No glue. Drop-in installation in seconds.\u003c\/p\u003e\n\u003cp\u003e🔥 Why owners love it\u003c\/p\u003e\n\u003cp\u003eEliminates the pointless slot Ford left there\u003c\/p\u003e\n\u003cp\u003eKeeps small items accessible and not scattered in the bottom of the console\u003c\/p\u003e\n\u003cp\u003eExcellent fit — doesn’t rattle when driving\u003c\/p\u003e\n\u003cp\u003eLooks OEM, matches the interior shape and texture\u003c\/p\u003e\n\u003cp\u003eA real user review:\u003c\/p\u003e\n\u003cp\u003eIt works in 2014 Ecoboost and 2013–2015 uses identical interior.\u003c\/p\u003e\n\u003cp\u003e📦 Versions Available\u003c\/p\u003e\n\u003cp\u003eYou can choose between 3 tray sizes, depending on how you prefer to use the space:\u003c\/p\u003e\n\u003cp\u003e📦 Versions Available\u003c\/p\u003e\n\u003cp\u003e✔ Version 01 — Narrow \/ Compact\u003cbr\u003eDesigned for minimal footprint. Fits in the console without blocking space.\u003cbr\u003ePerfect for coins, cards, small cables, keys, air fresheners, or small accessories.\u003cbr\u003eKeeps the OEM storage usable and organized with a clean look.\u003c\/p\u003e\n\u003cp\u003e✔ Version 02 — Long \/ Front-Oriented\u003cbr\u003eMounted along the console length.\u003cbr\u003eEasy to reach while driving — no need to dig inside the compartment.\u003cbr\u003eGreat for charging cables, adapters, parking cards, garage remotes, or everyday items.\u003cbr\u003eThe most practical daily-use configuration.\u003c\/p\u003e\n\u003cp\u003e✔ Version 03 — Wide \/ Side-Oriented\u003cbr\u003eMounted across the console width.\u003cbr\u003eOptimizes volume and allows wider objects to fit.\u003cbr\u003eIdeal for sunglasses, power banks, mini tools, small gadgets, or larger accessories.\u003cbr\u003eBest choice if you want maximum usable space.\u003c\/p\u003e\n\u003cp\u003eAll versions sit securely in the original slot and don’t interfere with console operation.\u003c\/p\u003e\n\u003cp\u003e🧰 Installation\u003c\/p\u003e\n\u003cp\u003eOpen your center console.\u003c\/p\u003e\n\u003cp\u003eSlide tray into the original card\/coin slot area.\u003c\/p\u003e\n\u003cp\u003eDone — no screws, no tools, no alterations.\u003c\/p\u003e\n\u003cp\u003eThe tray holds snugly due to the interior geometry — OEM-style fit.\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions (external)\u003c\/p\u003e\n\u003cp\u003e(approximately — minor variations ±0.2mm are normal)\u003c\/p\u003e\n\u003cp\u003eV01: 90 × 160 × 50 mm\u003c\/p\u003e\n\u003cp\u003eV02: 162 × 100 × 50 mm\u003c\/p\u003e\n\u003cp\u003eV03: 115 × 100 × 50 mm\u003c\/p\u003e\n\u003cp\u003eChoose the size that matches your storage style.\u003c\/p\u003e\n\u003cp\u003e🧾 Material \u0026amp; Finish\u003c\/p\u003e\n\u003cp\u003eMade from automotive-grade durable polymer designed to withstand heat, interior wear, drops, and everyday use.\u003c\/p\u003e\n\u003cp\u003eFor the most aesthetically perfect look, light sanding or painting can be applied if desired.\u003cbr\u003eHowever, the quality of our items is high and does not require post-processing.\u003cbr\u003eStill, minor traces of support removal or surface printing patterns can be present — this is normal for functional parts.\u003c\/p\u003e\n\u003cp\u003e🇺🇸 Compatibility\u003c\/p\u003e\n\u003cp\u003eFord F150 — 2004 model year and other years with same layout\u003c\/p\u003e\n\u003cp\u003eAlso confirmed by users on: 2013–2015 Ecoboost with identical console layout\u003c\/p\u003e\n\u003cp\u003eOther trims with the same slot design may fit as well.\u003c\/p\u003e\n\u003cp\u003e🌍 Production time\u003c\/p\u003e\n\u003cp\u003eMade to order.\u003cbr\u003eEach tray is produced individually with strict quality control.\u003c\/p\u003e\n\u003cp\u003e🤝 Notes\u003c\/p\u003e\n\u003cp\u003eThis product is designed from real truck interiors.\u003c\/p\u003e\n\u003cp\u003eWe do NOT modify or redesign after purchase — sold as-is.\u003c\/p\u003e\n\u003cp\u003eNo hardware is needed.\u003c\/p\u003e\n\u003cp\u003e🚚 Shipping\u003c\/p\u003e\n\u003cp\u003eSecure packaging to avoid deformation.\u003cbr\u003eWorldwide shipping available.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Narrow \/ Compact","offer_id":56497866604927,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"Long Front-Oriented","offer_id":56497866637695,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"Wide \/ Side-Oriented","offer_id":56497866670463,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/67aa5d5d-il_fullxfull.7487188033_ev0x.jpg?v=1765066584"},{"product_id":"ford-fiesta-1-6-na-cold-air-intake-adapter-maf0034-sensor","title":"Ford Fiesta 1.6 NA Cold Air Intake Adapter: MAF0034 Sensor","description":"\u003cp\u003eFord Sigma cold air intake adapter for Fiesta, Focus, Ka \u003c\/p\u003e\n\u003cp\u003eUpgrade your Ford with Cold Air Intake Adapter, designed for Mexican and Brazilian Fiestas equipped with the 1.6 NA Ford Sigma engine. This adapter is compatible with the MAF0034 sensor and allows you to easily adapt the 2.5-inch intake tube to the MAF sensor, with a mount for a 3-inch cold air intake.\u003c\/p\u003e\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\u003cp\u003ePerfect fit for Ford Fiesta 1.6 NA (S, SE, SE Plus, Titanium trims)\u003c\/p\u003e\n\u003cp\u003eNot designed for Ecoboost 1.6T Fiesta ST, but may work with Ford Focus MK2\/MK3 1.6 and Ford Ka 1.5L NA engines (shared platform with Fiesta).\u003c\/p\u003e\n\u003cp\u003eEasy installation: The lower portion of the intake box can remain in place, and the MAF sensor screws fit perfectly.\u003c\/p\u003e\n\u003cp\u003eDurable design: Allows for a 3-inch cold air intake upgrade while maintaining compatibility with the existing 2.5-inch intake tube.\u003c\/p\u003e\n\u003cp\u003eThis adapter is an ideal solution for those seeking to enhance their Ford Fiesta’s intake system while retaining stock components.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497866310015,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/7e1bec01-il_fullxfull.6880936396_t8bc.jpg?v=1765066218"},{"product_id":"adjustable-backseat-phone-holder-universal-fit-for-any-car","title":"Adjustable Backseat Phone Holder – Universal Fit for Any Car","description":"\u003cp\u003e📱 Adjustable Backseat Phone Holder – Universal Fit for Any Car\u003c\/p\u003e\n\u003cp\u003eThis 3D-printed backseat phone holder securely mounts your smartphone to the headrest of almost any vehicle. Perfect for keeping kids entertained on long trips — movies, YouTube, games, music, and more.\u003c\/p\u003e\n\u003cp\u003eThanks to its sliding adjustable rails, it fits almost any phone size, and the viewing angle can be adjusted to keep the screen easy to see even for passengers in child seats.\u003c\/p\u003e\n\u003cp\u003e✨ Features\u003c\/p\u003e\n\u003cp\u003eUniversal fit for 2-post headrests (most cars)\u003c\/p\u003e\n\u003cp\u003eAdjustable width — works with nearly all modern phones\u003c\/p\u003e\n\u003cp\u003eAdjustable viewing angle\u003c\/p\u003e\n\u003cp\u003eAnti-wobble design — includes a groove where you can install your own elastic band to stabilize the phone\u003c\/p\u003e\n\u003cp\u003eKid-friendly — ideal for keeping children busy\u003c\/p\u003e\n\u003cp\u003ePrinted in heat-resistant ASA\u003c\/p\u003e\n\u003cp\u003eSuper quick installation\u003c\/p\u003e\n\u003cp\u003e📏 Dimensions\u003c\/p\u003e\n\u003cp\u003ePrinted components include:\u003c\/p\u003e\n\u003cp\u003eHeadrest clips: ~19 × 31 × 17 mm\u003c\/p\u003e\n\u003cp\u003ePhone hooks: ~10 × 29 × 33 mm\u003c\/p\u003e\n\u003cp\u003eSlide rails: ~172 × 22 × 10 mm\u003c\/p\u003e\n\u003cp\u003eCross brace: ~172 × 22 × 10 mm\u003c\/p\u003e\n\u003cp\u003e📱 Phone Compatibility\u003c\/p\u003e\n\u003cp\u003eFits most phones, including:\u003c\/p\u003e\n\u003cp\u003eiPhone\u003c\/p\u003e\n\u003cp\u003eiPhone 15 \/ 15 Pro \/ 15 Pro Max\u003c\/p\u003e\n\u003cp\u003eiPhone 14 \/ 14 Pro \/ 14 Pro Max\u003c\/p\u003e\n\u003cp\u003eiPhone 13 \/ 12 \/ 11 series\u003c\/p\u003e\n\u003cp\u003eSamsung\u003c\/p\u003e\n\u003cp\u003eGalaxy S24 \/ S23 \/ S22 all versions\u003c\/p\u003e\n\u003cp\u003eA series (A54, A34, etc.)\u003c\/p\u003e\n\u003cp\u003eNote series\u003c\/p\u003e\n\u003cp\u003eOther\u003c\/p\u003e\n\u003cp\u003ePixel 6–8\u003c\/p\u003e\n\u003cp\u003eOnePlus 7–12\u003c\/p\u003e\n\u003cp\u003eXiaomi \/ Poco\u003c\/p\u003e\n\u003cp\u003eSony Xperia\u003c\/p\u003e\n\u003cp\u003eAny phone up to ~90 mm wide\u003c\/p\u003e\n\u003cp\u003e🚗 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003eWorks with any car that has two metal headrest posts, including Toyota, Mazda, Hyundai, Kia, Ford, BMW, Mercedes, Honda, Nissan, VW, and many more.\u003c\/p\u003e\n\u003cp\u003eElastic Band NOTE (important!)\u003c\/p\u003e\n\u003cp\u003e⚠ Elastic band is NOT included.\u003cbr\u003eYou will need to use your own simple elastic band (hair tie, rubber band, or small strap).\u003cbr\u003eThe back brace has a built-in groove designed to hold it.\u003c\/p\u003e\n\u003cp\u003eThis gives you full flexibility to choose the tension you prefer.\u003c\/p\u003e\n\u003cp\u003e🎨 Material \u0026amp; Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in high-quality ASA, which is:\u003c\/p\u003e\n\u003cp\u003eHeat-resistant (perfect for hot car interiors)\u003c\/p\u003e\n\u003cp\u003eUV-resistant\u003c\/p\u003e\n\u003cp\u003eStrong and durable\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed item; minor layer lines are normal. To achieve a fully smooth finish, you may sand and paint the part.\u003c\/p\u003e\n\u003cp\u003e📦 Package Includes\u003c\/p\u003e\n\u003cp\u003ePhone hooks\u003c\/p\u003e\n\u003cp\u003eHeadrest clamp mounts\u003c\/p\u003e\n\u003cp\u003eSlide rails\u003c\/p\u003e\n\u003cp\u003eCross brace\u003c\/p\u003e\n\u003cp\u003e(No elastic band included)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497866572159,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/413fb88f-il_fullxfull.7420680166_a3w6.jpg?v=1765065656"},{"product_id":"ford-mustang-sn95-cup-holder-1994-1995-ashtray-replacement-dual-cupholder","title":"Ford Mustang SN95 Cup Holder (1994-1995) | Ashtray Replacement Dual Cupholder","description":"\u003cp\u003eCupholder for 1994–1995 Ford Mustang SN95 — Ashtray Replacement\u003c\/p\u003e\n\u003cp\u003eUpgrade the center console of your 94–95 Mustang with this custom dual cup holder that replaces the factory ashtray insert. Designed to snap in securely using the original ashtray opening, this part gives you modern usability while keeping the interior OEM-style clean.\u003c\/p\u003e\n\u003cp\u003ePerfect fit, strong construction and a much more functional interior for daily driving.\u003c\/p\u003e\n\u003cp\u003e⭐ Fitment\u003c\/p\u003e\n\u003cp\u003e✔ Ford Mustang SN95 (1994, 1995)\u003cbr\u003e✔ V6 \/ GT \/ Cobra\u003cbr\u003e✔ Replaces factory ashtray insert\u003cbr\u003e✔ No permanent modifications needed\u003c\/p\u003e\n\u003cp\u003e🧩 Product Details\u003c\/p\u003e\n\u003cp\u003eDual cup holder design\u003c\/p\u003e\n\u003cp\u003eHolds most standard cups, bottles, cans and travel mugs\u003c\/p\u003e\n\u003cp\u003eSnaps into the original ashtray slot\u003c\/p\u003e\n\u003cp\u003eSmooth edges and OEM-inspired shape\u003c\/p\u003e\n\u003cp\u003e📏 Dimensions\u003c\/p\u003e\n\u003cp\u003e193.7 × 101.6 × 134.9 mm\u003c\/p\u003e\n\u003cp\u003eLength: 19.3 cm\u003c\/p\u003e\n\u003cp\u003eWidth: 10.1 cm\u003c\/p\u003e\n\u003cp\u003eHeight: 13.5 cm\u003c\/p\u003e\n\u003cp\u003e🖨 3D Printed Quality — Read Before Buying\u003c\/p\u003e\n\u003cp\u003eThis part is 3D printed in high-temperature ASA, ideal for automotive use.\u003cbr\u003eDue to the nature of 3D printing:\u003c\/p\u003e\n\u003cp\u003eMinor layer lines are possible\u003c\/p\u003e\n\u003cp\u003eLight sanding\/finishing can be done for a perfect show-car look\u003c\/p\u003e\n\u003cp\u003eStrength and heat resistance far exceed PLA versions from other shops\u003c\/p\u003e\n\u003cp\u003eEvery item is printed with premium filament and inspected before shipping.\u003c\/p\u003e\n\u003cp\u003e🔥 Why This Is Better Than the Commercial Cupholder?\u003c\/p\u003e\n\u003cp\u003eSame functionality\u003c\/p\u003e\n\u003cp\u003eBetter fitment\u003c\/p\u003e\n\u003cp\u003eMore attractive rounded design\u003c\/p\u003e\n\u003cp\u003eCosts less\u003c\/p\u003e\n\u003cp\u003eMade to order\u003c\/p\u003e\n\u003cp\u003eFull support from CarCultureCyprus\u003c\/p\u003e\n\u003cp\u003e📦 What You Get\u003c\/p\u003e\n\u003cp\u003e1x Cupholder (ashtray replacement)\u003c\/p\u003e\n\u003cp\u003eReady to install\u003c\/p\u003e\n\u003cp\u003e🛠 Installation\u003c\/p\u003e\n\u003cp\u003eRemove the factory metal ashtray insert\u003c\/p\u003e\n\u003cp\u003eSnap this cup holder into place\u003c\/p\u003e\n\u003cp\u003eDone — no screws, no drilling, no modifications\u003c\/p\u003e\n\u003cp\u003eTakes less than 10 seconds.\u003c\/p\u003e\n\u003cp\u003e❤️ Designed by the Community\u003c\/p\u003e\n\u003cp\u003eSpecial thanks to the creator for the original concept.\u003cbr\u003ePrinted, refined and quality-checked by CarCultureCyprus.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497867161983,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/49f1c117-il_fullxfull.7416711628_3u0o.jpg?v=1765064930"},{"product_id":"ford-capri-cup-holder-insert-center-console-drink-upgrade-fits-70mm-drinks-1987-1994","title":"Ford Capri Cup Holder Insert | Center Console Drink Upgrade | Fits 70mm Drinks | 1987–1994","description":"\u003cp\u003eFord Capri Cup Holder Insert | Center Console Drink Upgrade | Fits 70mm Drinks | 1987–1994\u003c\/p\u003e\n\u003cp\u003eFinally upgrade your Ford Capri interior with a proper cup holder insert that actually works.\u003cbr\u003eThe factory console was never designed for modern drink sizes — this insert solves that problem while keeping the OEM look.\u003c\/p\u003e\n\u003cp\u003eThis model fits drinks up to 70 mm in diameter (similar to a standard Coke can or most small takeaway cups).\u003cbr\u003eDesigned from the original Capri insert, tested in a 1990 SA model.\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment Notes\u003c\/p\u003e\n\u003cp\u003eFits Ford Capri 1987–1994 (convertible \/ hatchback)\u003c\/p\u003e\n\u003cp\u003eTested in 1990 SA — interior tolerances may vary slightly by year\u003c\/p\u003e\n\u003cp\u003eThis is a drop-in insert, no screws required\u003c\/p\u003e\n\u003cp\u003eSnaps securely into the original center console opening\u003c\/p\u003e\n\u003cp\u003eHolds two drinks securely without wobbling\u003c\/p\u003e\n\u003cp\u003eIf your Capri console is not identical to the one shown in the photos, a small amount of sanding or trimming may be required. Capri interior tooling varied by market and year, so slight differences are normal.\u003c\/p\u003e\n\u003cp\u003e🛠 About the Print\u003c\/p\u003e\n\u003cp\u003eThis is a professionally 3D printed part.\u003cbr\u003eLayer lines are normal — this is not injection molded plastic.\u003c\/p\u003e\n\u003cp\u003eIf you want a perfect smooth “factory look”, you can sand, prime and paint the part.\u003cbr\u003eOut of the box, it looks clean and functions exactly as intended.\u003c\/p\u003e\n\u003cp\u003eMaterial used: High-temp automotive-grade ASA\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Ford Capri Cup Holder Insert (one-piece design)\u003c\/p\u003e\n\u003cp\u003eNo hardware needed; installs in seconds.\u003c\/p\u003e\n\u003cp\u003e📏 Dimensions\u003c\/p\u003e\n\u003cp\u003e(159 × 72 × 46 mm)\u003c\/p\u003e\n\u003cp\u003eLength: 6.26 in\u003c\/p\u003e\n\u003cp\u003eWidth: 2.83 in\u003c\/p\u003e\n\u003cp\u003eHeight: 1.81 in\u003c\/p\u003e\n\u003cp\u003eCup diameter: 70 mm (2.75 in)\u003c\/p\u003e\n\u003cp\u003e❤️ Community \u0026amp; Credits\u003c\/p\u003e\n\u003cp\u003eThis design is inspired by and improved from the community-shared concept.\u003cbr\u003eCredits to the original Capri enthusiasts for keeping this classic alive.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497867260287,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/36e4c2ce-il_fullxfull.7464012899_lu60.jpg?v=1765064778"},{"product_id":"rear-seat-dual-cup-holder-for-ford-maverick-low-profile-fits-mount-black","title":"Rear Seat Dual Cup Holder for Ford Maverick — Low Profile FITS Mount black","description":"\u003cp\u003e⭐ Rear Seat Dual Cup Holder for Ford Maverick — Low Profile FITS Mount\u003c\/p\u003e\n\u003cp\u003eA custom dual cup holder designed specifically for the Ford Maverick, using the factory FITS rear-seat mounting point. This accessory gives rear passengers a stable, accessible place to hold drinks without taking up floor space or interfering with legroom.\u003c\/p\u003e\n\u003cp\u003ePerfect for families, road trips, pets, and anyone who wants more usable cup space in the back of a Maverick.\u003c\/p\u003e\n\u003cp\u003e⭐ Designed for the Ford Maverick FITS System\u003c\/p\u003e\n\u003cp\u003eFits securely into the OEM FITS slot located behind the center console.\u003cbr\u003eNo screws, no tools — just slide it in and it locks firmly in place.\u003c\/p\u003e\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cp\u003eFord Maverick XL\u003c\/p\u003e\n\u003cp\u003eFord Maverick XLT\u003c\/p\u003e\n\u003cp\u003eFord Maverick Lariat\u003c\/p\u003e\n\u003cp\u003eHybrid \u0026amp; EcoBoost\u003c\/p\u003e\n\u003cp\u003eTremor \/ FX4 (rear FITS slot required)\u003c\/p\u003e\n\u003cp\u003e⭐ Dual Cup Holder — Fits Many Bottle \u0026amp; Cup Sizes\u003c\/p\u003e\n\u003cp\u003eThe two large cup wells accommodate a wide range of drink sizes:\u003c\/p\u003e\n\u003cp\u003eWater bottles\u003c\/p\u003e\n\u003cp\u003eTravel mugs\u003c\/p\u003e\n\u003cp\u003eCoffee cups\u003c\/p\u003e\n\u003cp\u003eSlim cans \u0026amp; regular cans\u003c\/p\u003e\n\u003cp\u003eStainless steel tumblers\u003c\/p\u003e\n\u003cp\u003eSports bottles\u003c\/p\u003e\n\u003cp\u003eKids’ bottles \u0026amp; insulated cups\u003c\/p\u003e\n\u003cp\u003eTested with tall travel bottles — stays stable and upright while driving.\u003c\/p\u003e\n\u003cp\u003e⭐ Low Profile \u0026amp; Passenger-Friendly\u003c\/p\u003e\n\u003cp\u003eDoes not block legroom\u003c\/p\u003e\n\u003cp\u003eDoes not interfere with seat movement\u003c\/p\u003e\n\u003cp\u003eEasy for rear passengers to reach\u003c\/p\u003e\n\u003cp\u003eKeeps the back seat organized\u003c\/p\u003e\n\u003cp\u003ePerfect factory-style fit and look\u003c\/p\u003e\n\u003cp\u003eRear passengers finally get functional cup space the Maverick noticeably lacks.\u003c\/p\u003e\n\u003cp\u003e⭐ High-Quality ASA 3D Printed Part\u003c\/p\u003e\n\u003cp\u003eThis holder is 3D printed with high precision from automotive-grade ASA, providing:\u003c\/p\u003e\n\u003cp\u003eExcellent strength\u003c\/p\u003e\n\u003cp\u003eUV and heat resistance\u003c\/p\u003e\n\u003cp\u003eLong lifespan inside a vehicle\u003c\/p\u003e\n\u003cp\u003eSmooth, clean appearance\u003c\/p\u003e\n\u003cp\u003eIt arrives fully functional as printed — however, for a premium aesthetic finish, you may optionally:\u003c\/p\u003e\n\u003cp\u003e✨ lightly sand\u003cbr\u003e✨ paint to match your interior\u003c\/p\u003e\n\u003cp\u003e⭐ Dimensions (approx.)\u003c\/p\u003e\n\u003cp\u003e(based on your STL screenshots)\u003c\/p\u003e\n\u003cp\u003eLength: 190 mm (7.48 in)\u003c\/p\u003e\n\u003cp\u003eWidth: 115 mm (4.52 in)\u003c\/p\u003e\n\u003cp\u003eHeight: 48 mm (1.9 in)\u003c\/p\u003e\n\u003cp\u003eCompact, low-profile footprint that fits the FITS slot perfectly.\u003c\/p\u003e\n\u003cp\u003e⭐ Installation\u003c\/p\u003e\n\u003cp\u003eInsert directly into the Ford FITS slot behind the center console\u003c\/p\u003e\n\u003cp\u003eSits securely without wobbling\u003c\/p\u003e\n\u003cp\u003eRemoves instantly for cleaning\u003c\/p\u003e\n\u003cp\u003e⭐ What’s Included\u003c\/p\u003e\n\u003cp\u003e1× Dual Rear Seat Cup Holder for Ford Maverick (FITS System)\u003cbr\u003e(printed in black ASA by default)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497868243327,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/49c48d7d-il_fullxfull.7400013780_iy6b.jpg?v=1765061101"},{"product_id":"ford-mustang-cup-holder-coin-tray-1987-1993-black","title":"Ford Mustang Cup Holder \u0026 Coin Tray 1987–1993  | black","description":"\u003cp\u003eFord Mustang Cup Holder \u0026amp; Coin Tray 1987–1993  | black\u003c\/p\u003e\n\u003cp\u003eThis custom cup holder and change tray replaces the factory ashtray in 1987–1993 Ford Mustang interiors.\u003cbr\u003eThe design is split into three sections — lower, center, and upper — allowing for precise printing and a stronger final assembly once glued together.\u003c\/p\u003e\n\u003cp\u003eAfter assembling the three parts with a small amount of super glue, the cup holder slides directly into the opening left by the ashtray, giving Foxbody owners a clean, functional OEM-style cup holder without buying an expensive LMR console.\u003c\/p\u003e\n\u003cp\u003eUsers have confirmed that this solves the classic issue of jamming water bottles between the seat and the e-brake.\u003cbr\u003eNow you finally have a real usable cup holder in a Foxbody.\u003c\/p\u003e\n\u003cp\u003eThe cup holder has been tested while driving with a full cup of water — it stayed securely in place.\u003cbr\u003eBecause the Foxbody center console is tight, large cups may sit close to the shifter.\u003cbr\u003eHowever, shifting is completely fine when the cup is removed, and smaller cups usually cause no interference.\u003c\/p\u003e\n\u003cp\u003ePrinted from UV-resistant ASA, this insert is durable, heat-stable, and ideal for older Mustangs that see hot interiors and sunlight.\u003c\/p\u003e\n\u003cp\u003e🧩 3-Piece Modular Construction\u003c\/p\u003e\n\u003cp\u003eIncluded files\/parts:\u003c\/p\u003e\n\u003cp\u003eLower Section — inserts and locks into the ashtray cavity\u003c\/p\u003e\n\u003cp\u003eCenter Section — connects the lower and upper parts\u003c\/p\u003e\n\u003cp\u003eUpper Section — main cup holder + coin tray\u003c\/p\u003e\n\u003cp\u003eAssembly:\u003c\/p\u003e\n\u003cp\u003eAlign all three sections.\u003c\/p\u003e\n\u003cp\u003eApply super glue to the mating surfaces.\u003c\/p\u003e\n\u003cp\u003eHold until cured.\u003c\/p\u003e\n\u003cp\u003eOptional: sand and paint to match the factory interior.\u003c\/p\u003e\n\u003cp\u003e⚙️ Features\u003c\/p\u003e\n\u003cp\u003eFits 1987–1993 Ford Mustang (Foxbody)\u003c\/p\u003e\n\u003cp\u003eReplaces factory ashtray\u003c\/p\u003e\n\u003cp\u003eThree-section design for precise printing and strong final assembly\u003c\/p\u003e\n\u003cp\u003eIncludes cup holder + coin tray\u003c\/p\u003e\n\u003cp\u003eTested with a full drink — secure in real driving\u003c\/p\u003e\n\u003cp\u003eSlight shifter interference only with large cups\u003c\/p\u003e\n\u003cp\u003eSmaller cups fit comfortably\u003c\/p\u003e\n\u003cp\u003eMuch cheaper alternative to expensive LMR consoles\u003c\/p\u003e\n\u003cp\u003eMade from ASA — UV- and heat-resistant\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e🎨 Finish\u003c\/p\u003e\n\u003cp\u003eMatte black ASA.\u003cbr\u003eCan be painted to match your interior for a factory-style look.\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003e👉 Comes unassembled (3 pieces) — must be glued together.\u003cbr\u003e👉 Smaller cups work best for manual transmission Mustangs.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003eLower section\u003c\/p\u003e\n\u003cp\u003eCenter section\u003c\/p\u003e\n\u003cp\u003eUpper section (cup holder + coin tray)\u003cbr\u003e(Unassembled)\u003c\/p\u003e\n\u003cp\u003eAffordable, functional upgrades for classic Mustangs — OEM-friendly and built to last.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497868603775,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/6587d218-il_fullxfull.7398753246_5044.jpg?v=1765060701"},{"product_id":"ford-focus-mk2-st-cold-air-intake-snorkel-asa-heat-resistant-adapter-black","title":"Ford Focus Mk2 ST Cold Air Intake Snorkel | ASA Heat Resistant Adapter black","description":"\u003cp\u003eFord Focus Mk2 ST Cold Air Intake Snorkel | ASA Heat Resistant Adapter black\u003c\/p\u003e\n\u003cp\u003eA custom cold air intake snorkel designed for the Ford Focus Mk2 ST, made to connect the factory or upgraded airbox to a front air duct for improved airflow.\u003c\/p\u003e\n\u003cp\u003eThis adapter channels cool air directly into the airbox, reducing intake temperatures and improving engine response — ideal for airbox conversions or custom cold air setups.\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA plastic, the snorkel is heat- and UV-resistant, ensuring long-term reliability in the engine bay environment.\u003c\/p\u003e\n\u003cp\u003e✅ Fits Ford Focus Mk2 ST\u003cbr\u003e✅ Designed for airbox conversion setups\u003cbr\u003e✅ Directs cold air into the intake system\u003cbr\u003e✅ Printed in ASA – UV and heat resistant\u003cbr\u003e✅ Matte black OEM-style finish\u003cbr\u003e✅ Easy installation – no modification required\u003c\/p\u003e\n\u003cp\u003ePerfect for performance enthusiasts, OEM+ builds, or custom intake upgrades that demand both functionality and factory-like fitment.\u003c\/p\u003e\n\u003cp\u003e⚙️ Item Details\u003c\/p\u003e\n\u003cp\u003eFitment: Ford Focus Mk2 ST\u003c\/p\u003e\n\u003cp\u003eFunction: Cold air adapter \/ intake snorkel\u003c\/p\u003e\n\u003cp\u003eMaterial: ASA Plastic\u003c\/p\u003e\n\u003cp\u003eFinish: Matte black OEM texture\u003c\/p\u003e\n\u003cp\u003eInstallation: Direct fit to airbox conversion\u003c\/p\u003e\n\u003cp\u003e🧱 Materials \u003c\/p\u003e\n\u003cp\u003eASA Plastic, Heat Resistant Polymer\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497870700927,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/46c3a8c7-il_fullxfull.7361029368_hfb4.jpg?v=1764533197"},{"product_id":"ford-focus-st-intake-snorkel-custom-fit-tested-with-support-bracket-black","title":"Ford Focus ST Intake Snorkel | Custom Fit \u0026 Tested | With Support Bracket | black","description":"\u003cp\u003eFord Focus ST Intake Snorkel | Custom Fit \u0026amp; Tested | With Support Bracket | black\u003c\/p\u003e\n\u003cp\u003eA custom intake snorkel designed specifically for the Ford Focus ST, carefully altered and tested until a perfect fit was achieved.\u003c\/p\u003e\n\u003cp\u003eThis part replaces or upgrades the factory snorkel, improving airflow to the airbox while maintaining an OEM-style appearance.\u003cbr\u003eEach unit includes a support bracket for secure mounting and long-term durability.\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA plastic, it’s heat- and UV-resistant, making it ideal for use in the engine bay environment.\u003c\/p\u003e\n\u003cp\u003e✅ Fits Ford Focus ST\u003cbr\u003e✅ Perfected through multiple test fits\u003cbr\u003e✅ Support bracket included\u003cbr\u003e✅ ASA plastic – heat and UV resistant\u003cbr\u003e✅ OEM-style matte black finish\u003cbr\u003e✅ Easy installation – direct fit\u003c\/p\u003e\n\u003cp\u003eIdeal for performance builds, intake upgrades, or restorations where precision and durability matter.\u003c\/p\u003e\n\u003cp\u003e⚙️ Item Details\u003c\/p\u003e\n\u003cp\u003eFitment: Ford Focus ST\u003c\/p\u003e\n\u003cp\u003eFunction: Air intake snorkel (air duct to airbox)\u003c\/p\u003e\n\u003cp\u003eMaterial: ASA Plastic\u003c\/p\u003e\n\u003cp\u003eFinish: Matte black OEM texture\u003c\/p\u003e\n\u003cp\u003eIncludes: Support bracket\u003c\/p\u003e\n\u003cp\u003eInstallation: Direct fit, bolt-on\u003c\/p\u003e\n\u003cp\u003e🧱 Materials\u003c\/p\u003e\n\u003cp\u003eASA Plastic, Heat Resistant Polymer\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497871028607,"sku":null,"price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/03999deb-il_fullxfull.7408081203_2fij.jpg?v=1764533198"},{"product_id":"ford-fiesta-st-line-mk8-air-intake-mesh-set-fog-light-duct-insert-black","title":"Ford Fiesta ST Line Mk8 Air Intake Mesh Set | Fog Light Duct Insert black","description":"\u003cp\u003eFord Fiesta ST Line Mk8 Air Intake Mesh Set | Fog Light Duct Insert black\u003c\/p\u003e\n\u003cp\u003eA custom air intake mesh set designed for Ford Fiesta Mk8 ST and ST-Line models.\u003c\/p\u003e\n\u003cp\u003eThis mesh insert fits behind the fog light cover, improving airflow to the intake duct while maintaining a clean, OEM-style look.\u003cbr\u003eTo install, remove the fog light cover and create a small opening just above the fog light hole.\u003cbr\u003eThe back side of the cover may interfere slightly — simply trim the stay section for proper clearance.\u003c\/p\u003e\n\u003cp\u003eEach kit includes both left and right mesh pieces, printed in ASA plastic for excellent UV and heat resistance — ideal for daily use or performance builds.\u003c\/p\u003e\n\u003cp\u003e✅ Fits Ford Fiesta Mk8 ST \/ ST-Line\u003cbr\u003e✅ Set includes left and right mesh pieces\u003cbr\u003e✅ Mounts behind fog light cover\u003cbr\u003e✅ ASA material – heat \u0026amp; UV resistant\u003cbr\u003e✅ Matte black OEM-style finish\u003cbr\u003e✅ Simple install – small trimming required\u003c\/p\u003e\n\u003cp\u003ePerfect for airflow upgrades, intake duct mods, or subtle OEM+ styling.\u003c\/p\u003e\n\u003cp\u003e⚙️ Item Details\u003c\/p\u003e\n\u003cp\u003eFitment: Ford Fiesta Mk8 ST \/ ST-Line\u003c\/p\u003e\n\u003cp\u003eSet: 2 pieces (left + right)\u003c\/p\u003e\n\u003cp\u003ePosition: Fog light duct \/ front bumper area\u003c\/p\u003e\n\u003cp\u003eMaterial: ASA Plastic\u003c\/p\u003e\n\u003cp\u003eFinish: Matte black OEM texture\u003c\/p\u003e\n\u003cp\u003eInstallation: Requires small cut on inner stay section\u003c\/p\u003e\n\u003cp\u003e🧱 Materials (Etsy-safe format)\u003c\/p\u003e\n\u003cp\u003eASA Plastic, Heat Resistant Polymer\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497870799231,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/73f4d7b0-il_fullxfull.7407987107_2n2m.jpg?v=1765058585"},{"product_id":"sn95-ford-mustang-cold-air-intake-kit-4-6-gt-1996-2004-black","title":"SN95 Ford Mustang Cold Air Intake Kit | 4.6 GT (1996–2004) black","description":"\u003cp\u003eSN95 Ford Mustang Cold Air Intake Kit | 4.6 GT (1996–2004) black\u003c\/p\u003e\n\u003cp\u003eA complete custom cold air intake system for Ford Mustang SN95 4.6 GT (1996–2004).\u003cbr\u003eThis design relocates the air filter into the fender well for cooler air intake and improved performance.\u003cbr\u003eIt may also fit older 5.0 Mustangs, but that has not been confirmed.\u003c\/p\u003e\n\u003cp\u003eAll components are 3D printed in ABS with 3.5 mm wall thickness for heat resistance and rigidity.\u003cbr\u003eThe intake elbow and vacuum fittings are designed to be acetone-welded together, creating a single, sealed unit.\u003c\/p\u003e\n\u003cp\u003e📦 Included in the Set\u003c\/p\u003e\n\u003cp\u003eYou will receive all the necessary parts to assemble a full cold air intake system:\u003c\/p\u003e\n\u003cp\u003eMain intake pipe – connects to the throttle body\u003c\/p\u003e\n\u003cp\u003e90mm fender pipe – routes air to the fender well where the filter is placed\u003c\/p\u003e\n\u003cp\u003eMAF adapter plate – allows mounting the factory or aftermarket MAF sensor\u003c\/p\u003e\n\u003cp\u003eMAF pre-pipe section – connects between MAF plate and main pipe\u003c\/p\u003e\n\u003cp\u003eShort connector pipes (16mm, 19mm, 78mm) – for vacuum and breather lines\u003c\/p\u003e\n\u003cp\u003eAirflow transition piece – smooth transition between pipe sections\u003c\/p\u003e\n\u003cp\u003eAll parts fit together via acetone welding, and the vacuum fittings can be welded directly to the main pipe.\u003c\/p\u003e\n\u003cp\u003e⚙️ Installation Notes\u003c\/p\u003e\n\u003cp\u003eUse acetone to plastic-weld pipe joints and fittings.\u003c\/p\u003e\n\u003cp\u003eFit the 90mm pipe into the fender well with your air filter.\u003c\/p\u003e\n\u003cp\u003eDrill vacuum line holes as needed before final welding.\u003c\/p\u003e\n\u003cp\u003eUse high-quality 97mm and 85mm silicone couplers and 4\" worm clamps for secure connections.\u003c\/p\u003e\n\u003cp\u003eOptionally, apply foil or heat-reflective tape under the sections that run above the exhaust manifold.\u003c\/p\u003e\n\u003cp\u003e✅ Fits SN95 Ford Mustang 4.6 GT (1996–2004)\u003cbr\u003e✅ May fit older 5.0 models (not confirmed)\u003cbr\u003e✅ ASA plastic – strong, heat resistant\u003cbr\u003e✅ Fender-mounted 90mm cold air setup\u003cbr\u003e✅ Acetone-weld assembly for airtight seal\u003cbr\u003e✅ Custom part – may require small adjustments\u003c\/p\u003e\n\u003cp\u003e⚠️ Note\u003c\/p\u003e\n\u003cp\u003eThis is a custom performance part — not OEM.\u003cbr\u003eSome fine-tuning or trimming might be required depending on your MAF housing, throttle body, or filter type.\u003c\/p\u003e\n\u003cp\u003e🧱 Materials (Etsy-safe format)\u003c\/p\u003e\n\u003cp\u003eASA Plastic, Heat Resistant Polymer\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497871061375,"sku":null,"price":120.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/98295901-il_fullxfull.7407920073_1e0m.jpg?v=1765058520"},{"product_id":"ford-fiesta-mk6-cup-holder-insert-coin-slot-replacement-2002-2008-black","title":"Ford Fiesta MK6 Cup Holder Insert: Coin Slot Replacement (2002-2008) black","description":"\u003cp\u003eFord Fiesta MK6 Cup Holder Insert: Coin Slot Replacement (2002-2008)\u003c\/p\u003e\n\u003cp\u003eUpgrade your 2002–2008 Ford Fiesta interior with this practical cup holder insert, designed to fit directly in place of the factory coin holder slot.\u003c\/p\u003e\n\u003cp\u003eThis custom insert adds secure space for cups, mugs, or bottles without requiring any modifications. A simple and durable solution that blends cleanly with the OEM interior design of the Fiesta MK6 (2002–2008).\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003eFits 2008 Ford Fiesta (MK6 2002–2008)\u003c\/p\u003e\n\u003cp\u003eDirect fit in factory coin holder location\u003c\/p\u003e\n\u003cp\u003eNo cutting, no modifications – quick install\u003c\/p\u003e\n\u003cp\u003eHolds cups, bottles, or mugs securely\u003c\/p\u003e\n\u003cp\u003eDurable and practical OEM-style upgrade\u003c\/p\u003e\n\u003cp\u003ePerfect for anyone who wants to add more functionality to their Fiesta interior while keeping a stock look.\u003c\/p\u003e\n\u003cp\u003e✅ Fits Ford Fiesta MK6 (2002–2008)\u003c\/p\u003e\n\u003cp\u003e✅ Replaces factory coin holder with cup holder\u003c\/p\u003e\n\u003cp\u003e✅ Clean OEM-style fit, no modifications needed\u003c\/p\u003e\n\u003cp\u003e✅ Holds cups, mugs, and bottles securely\u003c\/p\u003e\n\u003cp\u003e✅ Simple and durable daily-use upgrade\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497874076031,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/735dcb4d-il_fullxfull.7246969634_4028.jpg?v=1765051366"},{"product_id":"6-5-ford-focus-speaker-adapter-rings-mk3-2011-2018-black","title":"6.5\" Ford Focus Speaker Adapter Rings – MK3 (2011-2018) black","description":"\u003cp\u003e6.5\" Ford Focus Speaker Adapter Rings – MK3 (2011-2018)\u003c\/p\u003e\n\u003cp\u003eUpgrade your sound system with these 6.5-inch door speaker adapter rings for Ford vehicles.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the 2016 Focus ST, but also compatible with many Focus MK3 (2011–2018) models and other Ford cars, these adapters allow easy installation of aftermarket 6.5\" speakers.\u003c\/p\u003e\n\u003cp\u003eFeatures wire slots for clean installs and a design loosely based on the Metra 825605, ensuring reliable fitment and simple installation.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003eFits Ford Focus MK3 (2011–2018), tested on 2016 Focus ST\u003c\/p\u003e\n\u003cp\u003eAllows install of 6.5\" aftermarket speakers\u003c\/p\u003e\n\u003cp\u003eSlotted for wires – clean, easy setup\u003c\/p\u003e\n\u003cp\u003eLoosely based on Metra 825605 dimensions\u003c\/p\u003e\n\u003cp\u003ePerfect for audio upgrades and custom installs\u003c\/p\u003e\n\u003cp\u003eA must-have for anyone upgrading their Ford Focus audio system with aftermarket speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e✅ Fits Ford Focus MK3 (2011–2018) – tested on 2016 Focus ST\u003c\/p\u003e\n\u003cp\u003e✅ Adapter rings for 6.5\" door speakers\u003c\/p\u003e\n\u003cp\u003e✅ Based on Metra 825605 fitment\u003c\/p\u003e\n\u003cp\u003e✅ Slots for wiring – easy install\u003c\/p\u003e\n\u003cp\u003e✅ Great for aftermarket audio upgrades\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497874108799,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/3dac47e8-il_fullxfull.7295002747_9wi6.jpg?v=1764533212"},{"product_id":"mini-cooper-s-cai-filter-adapter-enhanced-airflow-louder-supercharger","title":"Mini Cooper S CAI Filter Adapter — Improved Airflow \u0026 Intake Performance","description":"\u003cp\u003eMini Cooper S CAI Filter Adapter\u003c\/p\u003e\n\u003cp\u003eUpgrade the air intake performance of your Mini Cooper S with this custom-designed CAI Filter Adapter. This part allows you to mount a K\u0026amp;N cone filter inside your stock airbox, providing improved airflow for better engine performance. Similar to the John Cooper Works (JCW) performance option, this mod is practically invisible once the airbox is reassembled.\u003c\/p\u003e\n\u003cp\u003eTo enhance the air intake, this adapter also allows for enlarging the stock cold air inlet in the airbox and cowl, improving airflow dynamics. A 2.5\" grommet (such as the R53 lower steering column boot) can be used to seal the inlet perfectly.\u003c\/p\u003e\n\u003cp\u003eThe noticeable improvements include a louder, more aggressive supercharger scream at wide-open throttle, adding a thrilling auditory experience to your drive. While you may need a tune to unlock the full potential, the enhanced engine breathing and sound make it worthwhile. Made from durable ASA for excellent fatigue resistance, this piece is designed to be a long-lasting performance upgrade.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497875681663,"sku":null,"price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/min1.png?v=1765046983"},{"product_id":"ford-fiesta-mk7-mirror-cover-replacement-left-right-pair-exterior-side-mirror-cap","title":"Ford Fiesta MK7 Mirror Cover Replacement – Left \/ Right \/ Pair – Exterior Side Mirror Cap","description":"\u003cp\u003eFord Fiesta MK7 Mirror Cover Replacement – Left \/ Right \/ Pair – Exterior Side Mirror Cap (2009–2012)\u003c\/p\u003e\n\u003cp\u003eReplace your damaged or missing side mirror cover on the Ford Fiesta MK7 with this precision-fit mirror cap replacement.\u003c\/p\u003e\n\u003cp\u003eThis part was laser scanned directly from an original OEM mirror cover, guaranteeing accurate geometry and perfect fitment on the factory mirror housing.\u003c\/p\u003e\n\u003cp\u003eEach piece is manufactured from high-temperature ASA plastic, suitable for exterior automotive use and resistant to UV exposure, heat and moisture.\u003c\/p\u003e\n\u003cp\u003eAs with all 3D printed parts, minor surface marks may be visible.\u003cbr\u003eFor a perfect OEM appearance, light sanding and painting is recommended.\u003c\/p\u003e\n\u003cp\u003e🔹 Available Options\u003c\/p\u003e\n\u003cp\u003eSelect the required version from the variation menu:\u003c\/p\u003e\n\u003cp\u003e• Left mirror cover\u003cbr\u003e• Right mirror cover\u003cbr\u003e• Full set – Left \u0026amp; Right\u003c\/p\u003e\n\u003cp\u003e🔹 Features\u003c\/p\u003e\n\u003cp\u003e✔ Fits Ford Fiesta MK7 (2009–2012)\u003cbr\u003e✔ Laser scanned from original OEM part\u003cbr\u003e✔ Direct clip-on replacement\u003cbr\u003e✔ Exterior-grade ASA plastic\u003cbr\u003e✔ UV \u0026amp; heat resistant\u003cbr\u003e✔ Paintable for factory finish\u003cbr\u003e✔ Precision clip geometry for secure mounting\u003c\/p\u003e\n\u003cp\u003e🔹 Installation\u003c\/p\u003e\n\u003cp\u003eRemove the damaged mirror cap.\u003c\/p\u003e\n\u003cp\u003eAlign the new cover with the factory mounting points.\u003c\/p\u003e\n\u003cp\u003ePress firmly until all clips engage.\u003c\/p\u003e\n\u003cp\u003e⏱ Installation time: under 2 minutes.\u003c\/p\u003e\n\u003cp\u003e🔹 Compatibility\u003c\/p\u003e\n\u003cp\u003e• Ford Fiesta MK7 – 2009 to 2012\u003cbr\u003e• Works with original factory mirror housings\u003cbr\u003e• For standard mirrors only\u003c\/p\u003e\n\u003cp\u003e🔹 Processing \u0026amp; Shipping\u003c\/p\u003e\n\u003cp\u003e• Made to order within 1–3 business days\u003cbr\u003e• Ships worldwide\u003cbr\u003e• Secure packaging to prevent transit damage\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Left","offer_id":56637053469055,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"Right","offer_id":56637053501823,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"Left + Right","offer_id":56637053534591,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/mk2.png?v=1766870366"},{"product_id":"mustang-mach-e-center-console-organizer-storage-tray-insert","title":"Mustang Mach-E Center Console Organizer – Storage Tray Insert","description":"\u003cp\u003eMustang Mach-E Center Console Organizer – Storage Tray Insert\u003c\/p\u003e\n\u003cp\u003eUpgrade the center console of your Mustang Mach-E with this custom-fit organizer insert, designed to turn the deep factory storage space into a clean, practical, and easy-to-use compartment system.\u003c\/p\u003e\n\u003cp\u003eThis organizer adds structure and separation while keeping full access to the console and key fob area.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Mustang Mach-E\u003cbr\u003eCustom-fit center console organizer insert\u003cbr\u003eCreates 4 separate storage compartments\u003cbr\u003eKeeps small items organized and easy to reach\u003cbr\u003eOEM-style design that blends with the interior\u003cbr\u003eDoes not interfere with key fob placement or console operation\u003cbr\u003eEasy to install and remove at any time\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle: Mustang Mach-E\u003cbr\u003eLocation: Center console storage area\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003eDrop-in fit\u003cbr\u003eNo screws, no drilling, no adhesives required\u003c\/p\u003e\n\u003cp\u003eDesigned to sit securely inside the factory center console.\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – safe for hot vehicle interiors\u003cbr\u003eUV-stable – suitable for long-term use\u003cbr\u003eStrong and rigid structure\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed product. Minor layer lines or surface marks may be visible due to the printing process.\u003cbr\u003eOptional light sanding or painting can be done for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Center Console Organizer Insert\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56814398374271,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/ma1.png?v=1769032093"},{"product_id":"ford-maverick-fits-large-cup-holder-dual-size-insert-set","title":"Ford Maverick FITS Large Cup Holder – Dual Size Insert Set","description":"\u003cp\u003eFord Maverick FITS Large Cup Holder – Dual Size Insert Set\u003c\/p\u003e\n\u003cp\u003eUpgrade the center console of your Ford Maverick with this oversized cup holder insert designed for the factory FITS cleat system.\u003cbr\u003eBuilt to securely hold large modern drink containers while remaining modular for smaller cups when needed.\u003c\/p\u003e\n\u003cp\u003eThis is a practical, daily-use upgrade for Maverick owners who use large bottles and tumblers.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Ford Maverick FITS cleat system\u003cbr\u003eOversized cup holder for large bottles and tumblers\u003cbr\u003eModular insert system for different drink sizes\u003cbr\u003eStable and rattle-free fit\u003cbr\u003eUses factory FITS mounting location\u003cbr\u003eNo permanent modifications required\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Usage\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eFord Maverick (with FITS cleat system)\u003c\/p\u003e\n\u003cp\u003ePrimary holder:\u003cbr\u003eDesigned for large drink containers such as:\u003cbr\u003eStanley tumblers\u003cbr\u003eHydroflask bottles\u003cbr\u003eOwala bottles\u003cbr\u003eOther large reusable cups\u003c\/p\u003e\n\u003cp\u003eInsert sleeves:\u003cbr\u003eTwo drop-in sleeves included\u003cbr\u003eAllow secure fit for smaller bottles and canned drinks\u003cbr\u003eEasily removable depending on drink size\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eDrops directly into the factory FITS slot\u003cbr\u003eNo tools required\u003cbr\u003eRemoves just as easily for cleaning or reconfiguration\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – safe for hot vehicle interiors\u003cbr\u003eUV-stable – suitable for long-term daily use\u003cbr\u003eStrong and rigid construction for heavy bottles\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Large FITS Cup Holder Base\u003cbr\u003e2× Removable Size-Reduction Sleeves\u003c\/p\u003e\n\u003cp\u003e(Complete modular set)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56848736321919,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/FM5.png?v=1769534836"},{"product_id":"ford-mustang-gt-s197-fog-light-hella-500-conversion-housings-pair","title":"Ford Mustang GT (S197) Fog Light Hella 500 Conversion Housings – Pair","description":"\u003cp\u003eFord Mustang GT (S197) Fog Light Hella 500 Conversion Housings – Pair\u003c\/p\u003e\n\u003cp\u003eUpgrade the factory fog lights on your Ford Mustang GT (S197) with this conversion housing set designed to accept Hella 500 style fog lights while retaining the original aiming and mounting functionality.\u003c\/p\u003e\n\u003cp\u003eThese housings replace the stock fog light assemblies and allow installation of higher-quality Hella 500 units for improved durability, serviceability, and a cleaner appearance.\u003c\/p\u003e\n\u003cp\u003e***This is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding or painting is recommended for a perfect cosmetic finish.***\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Ford Mustang GT (S197)\u003cbr\u003eConverts factory fog lights to Hella 500 style units\u003cbr\u003eRetains factory aiming and adjustment functionality\u003cbr\u003eAllows easy bulb replacement without cutting or gluing\u003cbr\u003eClean, blackout-style housing appearance\u003cbr\u003eDirect replacement using factory mounting points\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eFord Mustang GT (S197)\u003cbr\u003eModel years: 2005–2009\u003c\/p\u003e\n\u003cp\u003eLight compatibility:\u003cbr\u003eHella 500 style fog lights\u003cbr\u003e(Hella 500 Black Magic and similar housings)\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eReuses factory fog light mounting and adjustment hardware\u003cbr\u003eNo permanent modifications required\u003cbr\u003eDesigned to allow future bulb replacement without disassembly or adhesive\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for fog light housing use\u003cbr\u003eUV-stable – designed for long-term exterior exposure\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e2× Hella 500 Conversion Fog Light Housings\u003c\/p\u003e\n\u003cp\u003e(Sold as a pair – left \u0026amp; right)\u003c\/p\u003e\n\u003cp\u003e⚠️ Fog light lenses, bulbs, and mounting hardware are not included.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56850624840063,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/fmg6.png?v=1769547097"},{"product_id":"ford-fusion-intake-sport-maf-adapter-for-cone","title":"Ford Fusion Intake Sport MAF Adapter for Cone","description":"\u003cp\u003eFord Fusion Intake Sport MAF Adapter for Cone\u003c\/p\u003e\n\u003cp\u003eUpgrade your intake setup with this MAF sensor adapter, designed specifically for the 2010 Ford Fusion Sport. This adapter allows installation of an aftermarket conical (pod-style) air filter while retaining the factory MAF sensor and correct airflow path.\u003c\/p\u003e\n\u003cp\u003eDesigned to match the stock intake diameter, this adapter avoids flow restriction and preserves proper sensor positioning for stable engine operation.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for 2010 Ford Fusion Sport\u003c\/p\u003e\n\u003cp\u003eAllows use of aftermarket conical \/ pod air filters\u003c\/p\u003e\n\u003cp\u003eRetains factory MAF sensor location\u003c\/p\u003e\n\u003cp\u003eMaintains correct airflow diameter\u003c\/p\u003e\n\u003cp\u003eSmooth internal transition to reduce turbulence\u003c\/p\u003e\n\u003cp\u003eOEM-inspired fit and geometry\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003cbr\u003eVehicle compatibility:\u003c\/p\u003e\n\u003cp\u003eFord Fusion Sport – 2010 model year\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eReplaces factory intake section at the MAF location\u003c\/p\u003e\n\u003cp\u003eAccepts aftermarket conical air filters\u003c\/p\u003e\n\u003cp\u003eDesigned to work with the original MAF sensor\u003c\/p\u003e\n\u003cp\u003eHose clamps and filter not included\u003c\/p\u003e\n\u003cp\u003eProfessional installation recommended\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for engine bay temperatures\u003c\/p\u003e\n\u003cp\u003eUV-stable – ideal for long-term under-hood use\u003c\/p\u003e\n\u003cp\u003eStrong, rigid construction with thick walls\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding is recommended if a smoother cosmetic finish is desired.\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eIntended for off-road \/ motorsport use\u003c\/p\u003e\n\u003cp\u003eBuyer is responsible for verifying local emissions and road legality\u003c\/p\u003e\n\u003cp\u003eProper installation and sealing are critical for correct operation\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× MAF Adapter for Conical Intake\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56885432516991,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/ff1.png?v=1770059457"},{"product_id":"fiesta-console-drawer-ford-mk7-center","title":"Fiesta Console Drawer Ford MK7 Center","description":"\u003cp\u003eFiesta Console Drawer Ford MK7 Center \u003c\/p\u003e\n\u003cp\u003e(Two Versions Available)\u003c\/p\u003e\n\u003cp\u003eUpgrade the unused factory space behind the center panel of your Ford Fiesta with this hidden center drawer, designed to slide into the original access opening. Adds practical storage while keeping a clean OEM-style interior look.\u003c\/p\u003e\n\u003cp\u003eTwo versions are available to match your needs: a simple storage drawer or a phone-ready drawer with split compartment.\u003c\/p\u003e\n\u003cp\u003e⭐ Features (Both Versions)\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Ford Fiesta MK7 center console\u003c\/p\u003e\n\u003cp\u003eUtilizes the factory hidden center access space\u003c\/p\u003e\n\u003cp\u003eOEM-style shape for a clean, factory-integrated look\u003c\/p\u003e\n\u003cp\u003eSmooth slide-in \/ slide-out operation\u003c\/p\u003e\n\u003cp\u003eNo permanent modifications to the vehicle\u003c\/p\u003e\n\u003cp\u003e🔧 Versions Available\u003c\/p\u003e\n\u003cp\u003e1️⃣ Storage Version\u003c\/p\u003e\n\u003cp\u003eSingle large compartment\u003c\/p\u003e\n\u003cp\u003eIdeal for keys, wallet, coins, or small accessories\u003c\/p\u003e\n\u003cp\u003eClean and simple internal layout\u003c\/p\u003e\n\u003cp\u003e2️⃣ Phone Holder Version\u003c\/p\u003e\n\u003cp\u003eSplit internal layout\u003c\/p\u003e\n\u003cp\u003eDesigned to support a smartphone when partially pulled out\u003c\/p\u003e\n\u003cp\u003eAllows phone to rest securely while driving\u003c\/p\u003e\n\u003cp\u003eStill provides storage space behind the phone area\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003cbr\u003eVehicle compatibility:\u003c\/p\u003e\n\u003cp\u003eFord Fiesta MK7\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003c\/p\u003e\n\u003cp\u003eSlides into the factory center opening\u003c\/p\u003e\n\u003cp\u003eNo screws required\u003c\/p\u003e\n\u003cp\u003eOptional felt or foam padding can be added to reduce rattling\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Finish\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA only\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for hot car interiors\u003c\/p\u003e\n\u003cp\u003eUV-stable for long-term interior use\u003c\/p\u003e\n\u003cp\u003eStrong, rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed physical product, not a digital file.\u003cbr\u003eMinor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Center Console Drawer\u003cbr\u003e(Choose: Storage Version or Phone Holder Version)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Storage","offer_id":56897523450239,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true},{"title":"Phone Holder","offer_id":56897523483007,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/fcd5.png?v=1770238670"},{"product_id":"ranger-armrest-storage-ford-center-console-tray-organizer","title":"Ranger Armrest Storage Ford Center Console Tray –  Organizer","description":"\u003cp\u003eRanger Armrest Storage Ford Center Console Tray –  Organizer\u003c\/p\u003e\n\u003cp\u003eAdd simple, practical organization to your Ford Ranger with this center console tray, designed to fit inside the factory armrest storage compartment. Separates small items for easier access while keeping an OEM-style, clean interior look.\u003c\/p\u003e\n\u003cp\u003eThis tray drops directly into the console and helps prevent small items from falling to the bottom of the deep storage box.\u003c\/p\u003e\n\u003cp\u003e⭐ Key Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Ford Ranger (2020)\u003c\/p\u003e\n\u003cp\u003eFits inside the factory center console \/ armrest storage\u003c\/p\u003e\n\u003cp\u003eSeparates small items for better organization\u003c\/p\u003e\n\u003cp\u003eClean, minimalist OEM-style design\u003c\/p\u003e\n\u003cp\u003eDrop-in fit – no tools required\u003c\/p\u003e\n\u003cp\u003eNo permanent modifications to the vehicle\u003c\/p\u003e\n\u003cp\u003e🚗 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003eFord Ranger – 2020 model year\u003c\/p\u003e\n\u003cp\u003e⚠️ Console design may vary by market and trim level.\u003cbr\u003ePlease compare your console shape with the photos before ordering.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eSimply place the tray inside the factory center console\u003c\/p\u003e\n\u003cp\u003eNo screws, glue, or tools required\u003c\/p\u003e\n\u003cp\u003eCan be removed at any time without leaving marks\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA plastic\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for hot vehicle interiors\u003c\/p\u003e\n\u003cp\u003eStrong, rigid construction for daily use\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed physical product, not a digital file.\u003cbr\u003eMinor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding or painting is recommended for a factory-style finish.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Center Console Storage Tray\u003c\/p\u003e\n\u003cp\u003e(Console contents shown in photos are for illustration only and are not included.)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56897792639359,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/ra1.png?v=1770244116"},{"product_id":"ranger-armrest-tray-ford-xl-wildtrak-raptor-center-console-organizer-2020","title":"Ranger Armrest Tray Ford XL \/ Wildtrak \/ Raptor Center Console  – Organizer (2020+)","description":"\u003cp\u003eRanger Armrest Tray Ford XL \/ Wildtrak \/ Raptor Center Console  – Organizer (2020+)\u003c\/p\u003e\n\u003cp\u003eAdd smart organization to the deep center console of your Ford Ranger with this drop-in center console tray, designed to hang securely on the factory cut-outs under the armrest lid. Keeps everyday items accessible and prevents them from falling to the bottom of the console.\u003c\/p\u003e\n\u003cp\u003eThis tray is designed to sit flush and stable while maintaining a clean, OEM-style appearance.\u003c\/p\u003e\n\u003cp\u003eSpace is intentionally left on the sides to allow optional stick-on foam or felt strips (not included) to reduce vibration and improve stability\u003c\/p\u003e\n\u003cp\u003e⭐ Key Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Ford Ranger 2020+ interiors\u003c\/p\u003e\n\u003cp\u003eFits XL, Wildtrak, and Raptor trims\u003c\/p\u003e\n\u003cp\u003eHangs securely on factory cut-outs under the console lid\u003c\/p\u003e\n\u003cp\u003eDivided layout for better organization\u003c\/p\u003e\n\u003cp\u003eOEM-style design that blends with the factory interior\u003c\/p\u003e\n\u003cp\u003eNo permanent modifications required\u003c\/p\u003e\n\u003cp\u003e🚗 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003eFord Ranger (2020 and newer)\u003c\/p\u003e\n\u003cp\u003eCompatible with XL \/ Wildtrak \/ Raptor center consoles\u003c\/p\u003e\n\u003cp\u003e⚠️ Console designs may vary by market and trim.\u003cbr\u003ePlease measure the cut-outs under your console lid and compare with the dimensions below before ordering.\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions\u003c\/p\u003e\n\u003cp\u003eWidth: 216 mm (rear edge tapers inward)\u003c\/p\u003e\n\u003cp\u003eFront to back: 127 mm\u003c\/p\u003e\n\u003cp\u003eStorage depth: 38 mm\u003c\/p\u003e\n\u003cp\u003eDesigned to hang from the small factory cut-outs under the armrest lid.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eDrops into the factory center console\u003c\/p\u003e\n\u003cp\u003eHangs on the built-in cut-outs under the lid\u003c\/p\u003e\n\u003cp\u003eNo screws or tools required\u003c\/p\u003e\n\u003cp\u003eSpace is intentionally left on the sides to allow optional stick-on foam or felt strips (not included) to reduce vibration and improve stability\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA plastic\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for hot vehicle interiors\u003c\/p\u003e\n\u003cp\u003eStrong and rigid for daily use\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed physical product, not a digital file.\u003cbr\u003eMinor layer lines or surface marks may be visible.\u003cbr\u003eOptional light sanding or painting is recommended for a factory-style finish.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Center Console Tray \/ Organizer\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eAftermarket 3D-printed accessory, not an OEM Ford part\u003c\/p\u003e\n\u003cp\u003eAlways verify measurements before ordering\u003c\/p\u003e\n\u003cp\u003eMinor cosmetic imperfections are normal for 3D-printed products\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56897806238079,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/rat1.png?v=1770244875"},{"product_id":"focus-speaker-adapters-ford-mk2-rings-front-door-6-5-165mm","title":"Focus Speaker Adapters Ford MK2 Rings – Front Door 6.5\" (165mm)","description":"\u003cp\u003eFocus Speaker Adapters Ford MK2 Rings – Front Door 6.5\" (165mm)\u003c\/p\u003e\n\u003cp\u003eSet of 2 – Factory Speaker Location Conversion\u003c\/p\u003e\n\u003cp\u003eThese front door speaker adapter rings are designed specifically for the Ford Focus MK2, allowing you to install 6.5\" (165 mm) aftermarket speakers into the factory door locations while retaining the original mounting points.\u003c\/p\u003e\n\u003cp\u003eThe adapters ensure correct speaker alignment, proper depth positioning, and a clean OEM-style installation without cutting or permanent modifications to the door panel.\u003c\/p\u003e\n\u003cp\u003eSold as a pair (2 adapters) for left and right front doors.\u003c\/p\u003e\n\u003cp\u003e⭐ Key Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Ford Focus MK2\u003c\/p\u003e\n\u003cp\u003eConverts factory speaker mount to accept 6.5\" \/ 165 mm speakers\u003c\/p\u003e\n\u003cp\u003eMaintains correct speaker position and depth\u003c\/p\u003e\n\u003cp\u003eUses original factory mounting points\u003c\/p\u003e\n\u003cp\u003eCompatible with most aftermarket 6.5\" speakers\u003c\/p\u003e\n\u003cp\u003eClean, OEM-style fit\u003c\/p\u003e\n\u003cp\u003eSupplied as a pair (2 adapters)\u003c\/p\u003e\n\u003cp\u003e🚗 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003eFord Focus MK2\u003c\/p\u003e\n\u003cp\u003eFront door speaker locations\u003c\/p\u003e\n\u003cp\u003e⚠️ Speaker layout and depth clearance may vary by trim level and model year.\u003cbr\u003ePlease verify speaker size and door configuration before ordering.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eAdapters mount directly into the factory speaker locations\u003c\/p\u003e\n\u003cp\u003eSpeakers attach to adapters using self-tapping screws\u003c\/p\u003e\n\u003cp\u003eNo cutting or permanent modifications required\u003c\/p\u003e\n\u003cp\u003eTest-fit recommended before final installation\u003c\/p\u003e\n\u003cp\u003e(Speakers, screws, and wiring are not included.)\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003e3D printed in ASA plastic\u003c\/p\u003e\n\u003cp\u003eHeat-resistant – suitable for hot vehicle interiors\u003c\/p\u003e\n\u003cp\u003eStrong and durable for long-term use\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed physical product, not a digital file.\u003cbr\u003eMinor layer lines or surface marks may be visible.\u003cbr\u003eOptional sanding or painting is recommended for a factory-style finish.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e2× Ford Focus MK2 front door speaker adapter rings (6.5\" \/ 165 mm)\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eAftermarket 3D-printed accessory, not an OEM Ford part\u003c\/p\u003e\n\u003cp\u003eAlways confirm speaker size and mounting depth before ordering\u003c\/p\u003e\n\u003cp\u003eMinor cosmetic imperfections are normal for 3D-printed products\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56897859649919,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/fs4.png?v=1770249166"},{"product_id":"ford-fiesta-ecoboost-st180-maf-housing-intake-air-flow-sensor-adapter","title":"Ford Fiesta Ecoboost \u0026 ST180 MAF Housing – Intake Air Flow Sensor Adapter","description":"\u003cp\u003eFord Fiesta Ecoboost \u0026amp; ST180 MAF Housing – Intake Air Flow Sensor Adapter\u003c\/p\u003e\n\u003cp\u003eUpgrade or replace your factory MAF housing with this precision-designed intake adapter for Ford Fiesta models. Designed to maintain smooth airflow while securely mounting the Mass Air Flow (MAF) sensor in an OEM-style configuration.\u003c\/p\u003e\n\u003cp\u003eIdeal for custom intake systems, cone filter conversions, or performance builds.\u003c\/p\u003e\n\u003cp\u003eAvailable in two versions:\u003cbr\u003e• Ford Fiesta Ecoboost\u003cbr\u003e• Ford Fiesta ST180\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Ford Fiesta models\u003cbr\u003eTwo versions available (Ecoboost \u0026amp; ST180)\u003cbr\u003eIntegrated MAF sensor mounting provision\u003cbr\u003eSmooth internal airflow path\u003cbr\u003eOEM-style cylindrical design\u003cbr\u003eSuitable for custom intake or cone filter setups\u003cbr\u003eStrong and heat-resistant construction\u003cbr\u003eNo permanent vehicle modification required (depending on setup)\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility:\u003cbr\u003eFord Fiesta Ecoboost\u003cbr\u003eFord Fiesta ST180\u003c\/p\u003e\n\u003cp\u003eApplication:\u003cbr\u003eMass Air Flow (MAF) housing\u003cbr\u003eAftermarket intake systems\u003cbr\u003ePerformance air intake builds\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003ePlease select correct version before ordering\u003cbr\u003eDesigned to accept factory-style MAF sensor\u003cbr\u003eEnsure correct airflow direction during installation\u003cbr\u003eProfessional installation recommended for tuned vehicles\u003cbr\u003eAlways verify compatibility with your specific engine variant\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for engine bay temperatures\u003cbr\u003eUV-stable – ideal for long-term use\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional light sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Ford Fiesta MAF Housing (selected version: Ecoboost or ST180)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Ecoboost","offer_id":56959080464767,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"ST180","offer_id":56959080497535,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/ff4_d2e0aa48-c513-4171-b373-a4061f2f2e80.png?v=1771101322"},{"product_id":"ford-explorer-upper-dash-trim-panel-replacement-dashboard-cover-2011-2019-piu-compatible","title":"Ford Explorer Upper Dash Trim Panel – Replacement Dashboard Cover (2011–2019, PIU Compatible)","description":"\u003cp\u003eRestore your dashboard with this upper dash trim panel, designed as a direct replacement for worn, damaged, or missing factory parts.\u003c\/p\u003e\n\u003cp\u003eThis piece is commonly prone to cracking or wear over time — this replacement provides a clean, durable solution while maintaining the original interior look.\u003c\/p\u003e\n\u003cp\u003eCompatible with both civilian models and Police Interceptor Utility (PIU) versions.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003cbr\u003eDesigned for Ford Explorer (2011–2019)\u003cbr\u003eCompatible with Ford Explorer Police Interceptor Utility (PIU)\u003cbr\u003eDirect replacement for upper dashboard trim panel\u003cbr\u003eOEM-style fit for seamless integration\u003cbr\u003eRestores damaged or missing dash components\u003cbr\u003eClean and minimal design matching factory layout\u003cbr\u003eStrong and durable construction for long-term use\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment \u0026amp; Installation\u003cbr\u003eVehicle compatibility:\u003cbr\u003eFord Explorer (2011–2019)\u003cbr\u003eFord Explorer PIU\u003c\/p\u003e\n\u003cp\u003eInstallation notes:\u003cbr\u003eDirect replacement for factory upper dash panel\u003cbr\u003eUses original mounting points\u003cbr\u003eNo modifications required\u003cbr\u003eTest fitted on 2019 model\u003c\/p\u003e\n\u003cp\u003e🖨 Material \u0026amp; Print Quality\u003cbr\u003ePrinted in ASA only\u003cbr\u003eHeat-resistant – suitable for dashboards exposed to sun\u003cbr\u003eUV-stable – prevents fading and warping\u003cbr\u003eStrong and rigid construction\u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed part. Minor layer lines or surface marks may be visible. Optional sanding or painting is recommended for a perfect cosmetic finish.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003cbr\u003e1× Upper Dash Trim Panel\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":57234384585087,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/fe4.png?v=1774700696"}],"url":"https:\/\/www.carculturecyprus.com\/collections\/ford.oembed?page=4","provider":"Car Culture Cyprus","version":"1.0","type":"link"}