{"title":"Cup Holders","description":"","products":[{"product_id":"yj-jeep-cup-holder-improvement-deep-secure-oem-style-upgrade","title":"YJ Jeep Cup Holder Improvement – Deep, Secure, OEM-Style Upgrade","description":"\u003cp\u003eYJ Jeep Cup Holder Improvement – Deep, Secure, OEM-Style Upgrade\u003c\/p\u003e\n\u003cp\u003eUpgrade your Jeep Wrangler YJ interior with this improved cup holder insert designed to finally hold drinks securely — unlike the shallow original console pocket. This redesigned unit features deep front and rear holders that keep bottles, cans, and tumblers stable even during off-road driving.\u003c\/p\u003e\n\u003cp\u003eCrafted to fit directly into the factory console opening, the design blends cleanly with the YJ interior while offering a much more practical storage solution.\u003c\/p\u003e\n\u003cp\u003e✨ 3D Printing Quality Disclaimer\u003c\/p\u003e\n\u003cp\u003eThis product is professionally 3D printed. Minor layer lines or small surface imperfections may be visible due to the nature of 3D printing. If you want a perfectly smooth, showroom-grade finish, light sanding and painting are recommended.\u003c\/p\u003e\n\u003cp\u003e📌 Fitment\u003c\/p\u003e\n\u003cp\u003eJeep Wrangler YJ (1987–1995)\u003c\/p\u003e\n\u003cp\u003eFits the factory console opening shown in the photos\u003c\/p\u003e\n\u003cp\u003eRear pocket depth may vary slightly depending on console trim\u003c\/p\u003e\n\u003cp\u003eNot guaranteed for aftermarket consoles (fit varies by manufacturer)\u003c\/p\u003e\n\u003cp\u003e📌 Features\u003c\/p\u003e\n\u003cp\u003eStrong, rigid ASA construction (heat-resistant, UV-stable)\u003c\/p\u003e\n\u003cp\u003eOEM-style form factor that blends naturally with the interior\u003c\/p\u003e\n\u003cp\u003eStable dual-pocket design to prevent tipping\u003c\/p\u003e\n\u003cp\u003eBase plate can be glued or screwed depending on preference\u003c\/p\u003e\n\u003cp\u003e📌 Installation\u003c\/p\u003e\n\u003cp\u003eDrops directly into the factory console recess\u003c\/p\u003e\n\u003cp\u003eSecure with glue or screws (depending on how you prefer it mounted)\u003c\/p\u003e\n\u003cp\u003eNo cutting or modifications required\u003c\/p\u003e\n\u003cp\u003e📌 Perfect For\u003c\/p\u003e\n\u003cp\u003eDaily drivers\u003c\/p\u003e\n\u003cp\u003eTrail and off-road rigs\u003c\/p\u003e\n\u003cp\u003eOEM-plus interior builds\u003c\/p\u003e\n\u003cp\u003eReplacing worn or shallow factory holders\u003c\/p\u003e\n\u003cp\u003eAnyone who wants an actually usable cup holder in a YJ\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497862607231,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/3549b585-il_fullxfull.7504533649_9un0.jpg?v=1765070823"},{"product_id":"bmw-e90-e91-dual-cup-holder-3d-printed-center-console-upgrade","title":"BMW E90\/E91 Dual Cup Holder: 3D Printed Center Console Upgrade","description":"\u003cp\u003eDual Cup Holder Insert for BMW E90 E91 — Premium Center Console Upgrade\u003c\/p\u003e\n\u003cp\u003eUpgrade the interior functionality of your BMW with this custom-designed dual cup holder insert engineered specifically for the BMW E90 and E91 3 Series (2005–2012). This precision 3D-printed insert restores practicality to the center console while preserving the clean OEM-style appearance of the original interior. Whether you are replacing a missing factory insert or upgrading for better daily usability, this solution delivers both form and function with a factory-correct look.\u003c\/p\u003e\n\u003cp\u003eDesigned to fit perfectly into the original center console opening, the dual cup layout allows you to securely hold two drinks side by side without interference while driving. The design maintains proper spacing and depth to ensure stability during braking, cornering, and everyday use.\u003c\/p\u003e\n\u003cp\u003ePremium ASA Construction\u003c\/p\u003e\n\u003cp\u003eThis insert is professionally 3D printed in high-quality ASA material. This ensures excellent structural strength, heat resistance for hot interiors, and long-term durability. The matte black surface finish blends seamlessly with the original BMW console plastics for a clean factory-style appearance.\u003c\/p\u003e\n\u003cp\u003eDesigned for Real Daily Use\u003c\/p\u003e\n\u003cp\u003eThe dual cup configuration accommodates standard bottles, coffee cups, tumblers, and beverage cans with confidence. The internal walls are reinforced for rigidity, while the smooth internal surfaces allow easy cleaning and maintenance over time.\u003c\/p\u003e\n\u003cp\u003eInstallation Requirement\u003c\/p\u003e\n\u003cp\u003eProfessional installation is required for this product.\u003cbr\u003eThe center console must be partially disassembled to correctly install the insert.\u003cbr\u003eThis ensures proper alignment, secure fitment, and a factory-quality final result.\u003cbr\u003eInstallation by a qualified technician or experienced installer is strongly recommended.\u003c\/p\u003e\n\u003cp\u003eWhat You Receive\u003c\/p\u003e\n\u003cp\u003eOne BMW E90 E91 dual cup holder insert\u003cbr\u003ePrinted in premium matte black ASA\u003cbr\u003eCustom-made for precise OEM-style fitment\u003cbr\u003eDesigned for installation inside the factory center console\u003c\/p\u003e\n\u003cp\u003eVehicle Compatibility\u003c\/p\u003e\n\u003cp\u003eBMW E90 Sedan 2005–2012\u003cbr\u003eBMW E91 Touring 2005–2012\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Black","offer_id":56497862902143,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/f0324738-il_fullxfull.6839515773_csoc.jpg?v=1764533165"},{"product_id":"jeep-cherokee-xj-cup-holder-insert-1984-1996-deep-dual-cupholder","title":"Jeep Cherokee XJ Cup Holder Insert (1984–1996) – Deep Dual Cupholder","description":"\u003cp\u003eJeep Cherokee XJ Cup Holder Insert (1984–1996) – Deep Dual Cupholder – Direct Factory Slot Fit\u003c\/p\u003e\n\u003cp\u003eGive your classic Jeep Cherokee XJ the cupholders it always needed.\u003cbr\u003eThis direct-fit cupholder insert slides into the factory mounting slots beside the shifter and provides two deep, stable drink holders that stay secure even on rough trails.\u003c\/p\u003e\n\u003cp\u003ePerfect upgrade for all XJ models up to 1996 — replaces the small, useless factory tray with something actually functional.\u003c\/p\u003e\n\u003cp\u003e🥤 Features\u003c\/p\u003e\n\u003cp\u003eDual deep cupholders – prevents tipping, works great for cans, bottles, travel mugs\u003c\/p\u003e\n\u003cp\u003eDirect factory fit – installs into OEM slots on the passenger side of the shifter\u003c\/p\u003e\n\u003cp\u003eZero drilling \/ zero modification\u003c\/p\u003e\n\u003cp\u003eOEM-style look — follows the original console shape\u003c\/p\u003e\n\u003cp\u003eQuick install (5 seconds) – slide in, push down, done\u003c\/p\u003e\n\u003cp\u003eReinforced internal walls for excellent durability\u003c\/p\u003e\n\u003cp\u003eSmooth curved interior for easy cleaning\u003c\/p\u003e\n\u003cp\u003eDesigned for everyday use: commuting, overlanding, or trail rides\u003c\/p\u003e\n\u003cp\u003e🚙 Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Jeep Cherokee XJ 1984–1996 (Pre-1997)\u003c\/p\u003e\n\u003cp\u003eNote: Does not fit 1997–2001 XJ (facelift models use a different console).\u003c\/p\u003e\n\u003cp\u003e🧩 Installation (Shown in Photo)\u003c\/p\u003e\n\u003cp\u003eLine up the rear tabs with the factory slots beside the center console tray.\u003c\/p\u003e\n\u003cp\u003eSlide it downward.\u003c\/p\u003e\n\u003cp\u003ePush until it seats firmly.\u003c\/p\u003e\n\u003cp\u003eDone — cupholder is locked in place.\u003c\/p\u003e\n\u003cp\u003eNo tools, no screws, nothing to modify.\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions\u003c\/p\u003e\n\u003cp\u003e108 × 180 × 81 mm\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e♻️ Material \u0026amp; Quality\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA — ideal for automotive interiors:\u003c\/p\u003e\n\u003cp\u003eUV-resistant\u003c\/p\u003e\n\u003cp\u003eHeat resistant (hot cabin safe)\u003c\/p\u003e\n\u003cp\u003eStrong, rigid, and durable\u003c\/p\u003e\n\u003cp\u003eMatte factory-style finish\u003c\/p\u003e\n\u003cp\u003ePrint quality is excellent.\u003cbr\u003eAs with all 3D-printed parts, extremely small layer lines may be visible up close.\u003cbr\u003eYou can sand\/prime\/paint for a perfect OEM look, but the part is fully usable as-is.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497863000447,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/il_fullxfull.8042827664_7u1f.avif?v=1792786581"},{"product_id":"2011-2016-ford-superduty-f250-f350-double-cup-holder-insert-fits-nalgene-hydroflask","title":"2011–2016 Ford SuperDuty (F250\/F350) Double Cup Holder Insert – Fits Nalgene \u0026 HydroFlask","description":"\u003cp\u003e2011–2016 Ford SuperDuty (F250\/F350) Double Cup Holder Insert – Fits Nalgene \u0026amp; HydroFlask – Deep Fit Upgrade\u003c\/p\u003e\n\u003cp\u003eTransform the useless shallow cup holders in your 2011–2016 Ford F250\/F350 SuperDuty into a deep, secure, real cupholder system that finally fits large bottles like Nalgene and HydroFlask.\u003c\/p\u003e\n\u003cp\u003eThis insert replaces the factory cupholder plates with a full-depth dual cup system, available in two sizes depending on your bottle type.\u003c\/p\u003e\n\u003cp\u003e🔥 Available Versions (Choose Your Size)\u003cbr\u003e1️⃣ Nalgene Version (Standard) – 100mm + 90mm\u003c\/p\u003e\n\u003cp\u003eBased on user-confirmed measurements from the original design:\u003c\/p\u003e\n\u003cp\u003eLarge cupholder: 100 mm (3.93\")\u003cbr\u003ePerfect for:\u003cbr\u003e✔ 32 oz Nalgene\u003cbr\u003e✔ HydroFlask 32 oz\u003cbr\u003e✔ Large insulated bottles\u003cbr\u003e✔ Big mugs \/ thermos\u003c\/p\u003e\n\u003cp\u003eSmaller cupholder: 90 mm (3.54\")\u003cbr\u003eFits:\u003cbr\u003e✔ Standard coffee cups\u003cbr\u003e✔ Soda bottles\u003cbr\u003e✔ Yeti 20 oz\u003cbr\u003e✔ Medium tumblers\u003c\/p\u003e\n\u003cp\u003eUsers confirmed:\u003cbr\u003e➡️ “It fits a Hydroflask.”\u003cbr\u003e➡️ Sits firmly with just enough room, not overly tight.\u003c\/p\u003e\n\u003cp\u003e2️⃣ Dual 3.75\" Cup Version\u003c\/p\u003e\n\u003cp\u003eBoth cupholders: 3.75\" \/ ~95 mm\u003c\/p\u003e\n\u003cp\u003eBest for those who want two equal large cupholders.\u003c\/p\u003e\n\u003cp\u003e🛠️ Fitment\u003c\/p\u003e\n\u003cp\u003e✔ Ford SuperDuty F250 \/ F350\u003cbr\u003e✔ Model years 2011–2016\u003cbr\u003e✔ Direct drop-in replacement\u003cbr\u003e✔ No trimming or drilling\u003c\/p\u003e\n\u003cp\u003eThe insert sits fully flush under the silver\/chrome factory bezel, exactly as shown in the install photos.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDeep wells to stop bottles from tipping\u003c\/p\u003e\n\u003cp\u003ePerfect sizing for large bottles\u003c\/p\u003e\n\u003cp\u003eSmooth interior curves — easy to clean\u003c\/p\u003e\n\u003cp\u003eOEM-style fit under the factory trim\u003c\/p\u003e\n\u003cp\u003eAvailable in two functional size layouts\u003c\/p\u003e\n\u003cp\u003eOptional side holes for RAM mount ball\u003c\/p\u003e\n\u003cp\u003eStrong, rugged, automotive-ready construction\u003c\/p\u003e\n\u003cp\u003e🧩 What’s Included\u003c\/p\u003e\n\u003cp\u003e1x Cup holder insert (your chosen size)\u003c\/p\u003e\n\u003cp\u003eReady to drop into the existing SuperDuty cupholder plate\u003c\/p\u003e\n\u003cp\u003e♻️ Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003ePrinted from high-temperature ASA, ideal for interiors:\u003c\/p\u003e\n\u003cp\u003eUV resistant\u003c\/p\u003e\n\u003cp\u003eFade-proof\u003c\/p\u003e\n\u003cp\u003eHeat resistant\u003c\/p\u003e\n\u003cp\u003eImpact strong\u003c\/p\u003e\n\u003cp\u003eQuality is excellent, but as with any 3D print:\u003c\/p\u003e\n\u003cp\u003eMinor layer texture can be visible\u003c\/p\u003e\n\u003cp\u003eFor a factory-smooth finish, sanding\/primer is optional\u003c\/p\u003e\n\u003cp\u003eFully functional right out of the box\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions\u003c\/p\u003e\n\u003cp\u003e211 × 119.8 × 89 mm\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eRemove factory top cup plates\u003c\/p\u003e\n\u003cp\u003eDrop insert in place\u003c\/p\u003e\n\u003cp\u003eReinstall the trim — done\u003cbr\u003eNo rattles, no movement.\u003c\/p\u003e\n\u003cp\u003eOptional: add a dab of double-sided tape if you want it 100% locked.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Nalgene Version","offer_id":56497863262591,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true},{"title":"Dual 3.75","offer_id":56497863295359,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/d1f158b9-il_fullxfull.7453240476_hq4b.jpg?v=1765070032"},{"product_id":"vw-t5-van-cup-holder-3d-printed-dashboard-drink-holder-black","title":"VW T5 Van Cup Holder: 3D Printed Dashboard Drink Holder black","description":"\u003cp\u003eVW T5 Van Cup Holder: 3D Printed Dashboard Drink Holder\u003c\/p\u003e\n\u003cp\u003eThe cup holder opening diameter is approximately 90 mm, suitable for most standard 0.5-0.75L bottles (typical water or soda bottles).\u003c\/p\u003e\n\u003cp\u003eThis special cup holder is designed for the Volkswagen Transporter T5.\u003cbr\u003eThis holder attaches to the dashboard and offers a practical solution for securely storing drinks while driving.\u003c\/p\u003e\n\u003cp\u003e✔ Designed specifically for VW T5 vans (2003-2015)\u003cbr\u003e✔ Durable and lightweight 3D-printed construction\u003cbr\u003e✔ Easy installation – no permanent modifications required\u003cbr\u003e✔ Ideal for coffee cups, bottles, and cans\u003cbr\u003e✔ A great solution if your van didn't have factory cup holders or you need extra storage space.\u003c\/p\u003e\n\u003cp\u003eFits:\u003c\/p\u003e\n\u003cp\u003eVolkswagen Transporter T5 (2003–2015)\u003c\/p\u003e\n\u003cp\u003eVW T5 Multivan \/ Caravelle\u003c\/p\u003e\n\u003cp\u003eVW T5 California\u003c\/p\u003e\n\u003cp\u003eMaterial: Durable 3D-printed plastic\u003cbr\u003eColor: Black\u003c\/p\u003e\n\u003cp\u003eUpgrade your van with a simple and functional accessory designed for everyday use!\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497863590271,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/139a99d0-il_fullxfull.7223516020_61me.jpg?v=1764533170"},{"product_id":"pajero-gen-1-cup-holder-dual-can-holder-with-storage-slot","title":"Pajero Gen 1 Cup Holder – Dual Can Holder with Storage Slot","description":"\u003cp\u003ePajero Gen 1 Cup Holder – Dual Can Holder with Storage Slot\u003c\/p\u003e\n\u003cp\u003eGive your classic Mitsubishi Pajero Gen 1 the convenience it always deserved!\u003cbr\u003eThe first-generation Pajero never came with proper cup holders, and the center area only allowed a single small aftermarket one — until now. This custom insert finally provides two practical drink holders plus a long storage slot for small everyday items.\u003c\/p\u003e\n\u003cp\u003eThe design fits naturally into the factory console space, adding modern functionality without changing the classic interior.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003e✔ Holds two standard soda\/beer cans securely\u003c\/p\u003e\n\u003cp\u003e✔ Long side slot for coins, pens, tools, or other essentials\u003c\/p\u003e\n\u003cp\u003e✔ Designed specifically for the Pajero Gen 1 (manual transmission)\u003c\/p\u003e\n\u003cp\u003e✔ Clean, OEM-like shape that blends with the interior\u003c\/p\u003e\n\u003cp\u003e✔ Strong, lightweight, practical — ideal for daily use or off-road trips\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003eThis model is intended for manual-transmission Pajero Gen 1 only.\u003c\/p\u003e\n\u003cp\u003eOwners of automatic models have pointed out that the console is different, so please check your layout before ordering.\u003c\/p\u003e\n\u003cp\u003eThe product is 3D-printed in high quality, but for the best visual finish, light sanding and painting are recommended. Minor marks from support removal are normal for 3D prints.\u003c\/p\u003e\n\u003cp\u003eDesigner Acknowledgment\u003c\/p\u003e\n\u003cp\u003eThis cup holder is based on the excellent original design work by Tropax — a big credit to him for creating such a functional and well-thought-out model.\u003c\/p\u003e\n\u003cp\u003eModern practicality for a legendary 4x4 — without losing the classic feel.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497864212863,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/ChatGPT_Image_Oct_23_2026_11_15_36_AM.png?v=1792743684"},{"product_id":"ford-ranger-removable-cupholder-fits-1998-2003-60-40-seats","title":"Ford Ranger Removable Cupholder – Fits 1998–2003 (60\/40 Seats)","description":"\u003cp\u003e🛠 Ford Ranger Removable Cupholder – Fits 1998–2003 (60\/40 Seats) | Stable, Deep, Multi-Size Inserts\u003c\/p\u003e\n\u003cp\u003eUpgrade the unusable factory cupholder area of your early Ford Ranger.\u003cbr\u003eThis removable cupholder fits perfectly into the notch between the 60\/40 seats (1998–2003 models) and provides stable, deep, rattle-free storage for bottles, mugs, tumblers, and small accessories.\u003c\/p\u003e\n\u003cp\u003eDesigned with proper depth, smooth rounded edges, and optional inserts for smaller cups — so everything stays in place even on rough roads.\u003c\/p\u003e\n\u003cp\u003e⭐ Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Ford Ranger 1998–2003 with 60\/40 front bench seats\u003cbr\u003e✔ Drops into the factory notch — no drilling, no fasteners\u003cbr\u003e✔ Works with most factory \u0026amp; aftermarket seat covers\u003cbr\u003e✔ Stays firmly in place due to shape + vehicle geometry\u003c\/p\u003e\n\u003cp\u003e🧃 Fits Popular Bottles \u0026amp; Mugs\u003c\/p\u003e\n\u003cp\u003eThe large and medium cup rings support many common sizes, including:\u003c\/p\u003e\n\u003cp\u003eHydroFlask 40oz \/ 32oz\u003c\/p\u003e\n\u003cp\u003eYeti Rambler 10oz \/ 14oz \/ 20oz\u003c\/p\u003e\n\u003cp\u003eStarbucks tall \u0026amp; grande cups\u003c\/p\u003e\n\u003cp\u003eTrader Joe’s 1.25L sparkling water bottle\u003c\/p\u003e\n\u003cp\u003eStandard coffee mugs\u003c\/p\u003e\n\u003cp\u003eSlim tumblers\u003c\/p\u003e\n\u003cp\u003eSports bottles\u003c\/p\u003e\n\u003cp\u003eSmall condiment bottles (Tajin, Tabasco)\u003c\/p\u003e\n\u003cp\u003eEssential oil vials\u003c\/p\u003e\n\u003cp\u003eMini-items (gum, chapstick, etc.)\u003c\/p\u003e\n\u003cp\u003eIncludes a small-size insert you can place into the cup ring for narrow cups.\u003c\/p\u003e\n\u003cp\u003e🧩 Features\u003c\/p\u003e\n\u003cp\u003eDeep cup pockets prevent tipping\u003c\/p\u003e\n\u003cp\u003eRemovable small insert for thin bottles\u003c\/p\u003e\n\u003cp\u003eRaised edges reduce spills\u003c\/p\u003e\n\u003cp\u003eExtra small slots for pens, snacks, mini bottles\u003c\/p\u003e\n\u003cp\u003eSmooth ergonomic shape that matches the floor contours\u003c\/p\u003e\n\u003cp\u003eRemovable \/ washable design\u003c\/p\u003e\n\u003cp\u003eOne-piece construction (cup insert separate)\u003c\/p\u003e\n\u003cp\u003eStable without screws or glue\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions\u003c\/p\u003e\n\u003cp\u003eMain unit: 208 × 190 × 50 mm\u003cbr\u003eInsert: 93 × 93 × 46 mm\u003c\/p\u003e\n\u003cp\u003e🎨 Material \u0026amp; Finish\u003c\/p\u003e\n\u003cp\u003eMade from high-quality ASA for durability, UV resistance, and stability in hot climates.\u003c\/p\u003e\n\u003cp\u003eImportant:\u003cbr\u003eFor the most aesthetic result, we recommend lightly sanding and painting.\u003cbr\u003eOur parts have excellent print quality and do not require finishing, but may show minor support or layer marks typical for FDM printing.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003c\/p\u003e\n\u003cp\u003eYou will receive:\u003cbr\u003e✔ 1× Ford Ranger removable cupholder\u003cbr\u003e✔ 1× Narrow-cup insert\u003c\/p\u003e\n\u003cp\u003eBolts, screws or extras are NOT required or included.\u003c\/p\u003e\n\u003cp\u003e📌 Notes\u003c\/p\u003e\n\u003cp\u003eThis is NOT a universal cupholder — it is shaped specifically for Ford Ranger 1998–2003 60\/40 seats.\u003c\/p\u003e\n\u003cp\u003eWill NOT fit consoles with aftermarket vaults unless measured.\u003c\/p\u003e\n\u003cp\u003eSome Rangers may have slight cabin shape differences; this design follows OEM geometry.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497864573311,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/0adee261-il_fullxfull.7497848581_h7he.jpg?v=1765068151"},{"product_id":"renault-megane-3-cup-holder-insert-2-versions-standard-tight-fit-large-xl-mugs-2008-2016","title":"Renault Megane 3 Cup Holder Insert | 2 Versions: Standard Tight-Fit + Large XL Mugs | 2008–2016","description":"\u003cp\u003eUpgrade your Renault Megane 3 (2008–2016) interior with a custom-made cup holder insert designed to fit perfectly inside the center console.\u003cbr\u003eWe offer two versions to match different cup sizes and driving needs.\u003c\/p\u003e\n\u003cp\u003e⭐ VERSION 1 — Standard \/ Tight Fit (Small Cups \u0026amp; Cans)\u003c\/p\u003e\n\u003cp\u003eThis version is specifically designed for standard-size drinks and provides a stable, tight fit.\u003c\/p\u003e\n\u003cp\u003ePerfect for:\u003c\/p\u003e\n\u003cp\u003e330ml cans\u003c\/p\u003e\n\u003cp\u003eRed Bull \/ slim cans\u003c\/p\u003e\n\u003cp\u003eSmall \u0026amp; medium takeaway cups\u003c\/p\u003e\n\u003cp\u003eSlim water bottles\u003c\/p\u003e\n\u003cp\u003eCharacteristics:\u003c\/p\u003e\n\u003cp\u003eTight, secure grip\u003c\/p\u003e\n\u003cp\u003ePrevents wobbling during driving\u003c\/p\u003e\n\u003cp\u003eOptimized for stability\u003c\/p\u003e\n\u003cp\u003eBest OEM-style look\u003c\/p\u003e\n\u003cp\u003eBased on customer feedback: this version is intentionally compact.\u003cbr\u003eLarger mugs will NOT fit — choose Version 2 for big cups.\u003c\/p\u003e\n\u003cp\u003eBest for: drivers who want maximum stability for smaller drinks.\u003c\/p\u003e\n\u003cp\u003e⭐ VERSION 2 — Large \/ XL Wide Fit (Big Coffee Cups \u0026amp; Mugs)\u003c\/p\u003e\n\u003cp\u003eThis variation is completely redesigned inside to provide more internal space, while keeping the same external size to match the Megane 3 console.\u003c\/p\u003e\n\u003cp\u003ePerfect for:\u003c\/p\u003e\n\u003cp\u003eLarge takeaway coffee (Starbucks L \/ XL)\u003c\/p\u003e\n\u003cp\u003eWide-body travel mugs\u003c\/p\u003e\n\u003cp\u003eThermo mugs\u003c\/p\u003e\n\u003cp\u003e500–750 ml bottles\u003c\/p\u003e\n\u003cp\u003eLarger ceramic mugs (car-friendly size)\u003c\/p\u003e\n\u003cp\u003eCharacteristics:\u003c\/p\u003e\n\u003cp\u003eIncreased cup diameter (significantly wider than Version 1)\u003c\/p\u003e\n\u003cp\u003eThinner internal walls to maximize space\u003c\/p\u003e\n\u003cp\u003eImproved bottom geometry for big cups\u003c\/p\u003e\n\u003cp\u003eMulti-slot organizer layout\u003c\/p\u003e\n\u003cp\u003eFits securely in the same OEM location\u003c\/p\u003e\n\u003cp\u003eBest for: drivers who use large coffees, wide mugs, or long trips.\u003c\/p\u003e\n\u003cp\u003e📐 DIMENSIONS\u003c\/p\u003e\n\u003cp\u003eSince the Renault Megane 3 center console has fixed boundaries, both versions share the same outer size:\u003c\/p\u003e\n\u003cp\u003eVersion 1 (Standard): 181 × 114 × 100 mm\u003c\/p\u003e\n\u003cp\u003eVersion 2 (Large): 179.4 × 114.36 × 99.5 mm\u003cbr\u003e(Outer dimensions vary slightly due to modeling, but both fit the console perfectly.)\u003c\/p\u003e\n\u003cp\u003eWhat changes is ONLY the internal cup size.\u003c\/p\u003e\n\u003cp\u003e🔧 INSTALLATION\u003c\/p\u003e\n\u003cp\u003eDrop-in fit.\u003cbr\u003eNo cutting.\u003cbr\u003eNo screws.\u003cbr\u003eNo tools.\u003cbr\u003eJust place it in the console and use immediately.\u003c\/p\u003e\n\u003cp\u003e🧱 MATERIAL \u0026amp; FINISH – READ THIS\u003c\/p\u003e\n\u003cp\u003eMade from ASA — automotive-grade filament:\u003c\/p\u003e\n\u003cp\u003eHeat resistant\u003c\/p\u003e\n\u003cp\u003eUV resistant\u003c\/p\u003e\n\u003cp\u003eFade-resistant\u003c\/p\u003e\n\u003cp\u003eStrong \u0026amp; durable\u003c\/p\u003e\n\u003cp\u003eDesigned for real daily use\u003c\/p\u003e\n\u003cp\u003eThis is a high-quality 3D printed part.\u003cbr\u003eMinor layer lines may be visible — normal for professional 3D printing.\u003c\/p\u003e\n\u003cp\u003eFor a perfect cosmetic finish, you may lightly sand or paint it,\u003cbr\u003ebut the part is fully usable as-is.\u003c\/p\u003e\n\u003cp\u003e📦 INCLUDED\u003c\/p\u003e\n\u003cp\u003e1× Cup Holder Insert\u003cbr\u003eChoose Version 1 (Standard\/Tight) or Version 2 (Large\/XL).\u003c\/p\u003e\n\u003cp\u003e🏁 WHY THIS PRODUCT\u003c\/p\u003e\n\u003cp\u003eRenault Megane 3 has no usable cup holders from factory.\u003cbr\u003eThis insert solves the issue completely — securely, cleanly and OEM-looking.\u003c\/p\u003e\n\u003cp\u003eDesigned by enthusiasts. Tested in real cars. Daily-use ready.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Standard \/ Tight Fit","offer_id":56497864900991,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true},{"title":"Large \/ XL Wide Fit","offer_id":56497864933759,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/fa923723-il_fullxfull.7412496814_qrt9.jpg?v=1765067517"},{"product_id":"vw-t6-dashboard-cup-holder-set-custom-fit-spill-proof-black","title":"VW T6 Dashboard Cup Holder Set: Custom Fit, Spill-Proof black","description":"\u003cp\u003eVW T6 Cup Holder – Complete Kit (Dashboard Mount)\u003c\/p\u003e\n\u003cp\u003eThis 2-piece set of cup holders is specifically designed for the top of the VW Transporter T6 dashboard.\u003cbr\u003eThe set includes both sides of the cup holder, which are securely fastened together with three pins.\u003c\/p\u003e\n\u003cp\u003e✔ Perfect fit for the top of the VW T6 dashboard\u003cbr\u003e✔ Complete kit – includes both cup holders and inserts\u003cbr\u003e✔ Designed to be finished in suede or fabric for a custom look (DIY)\u003cbr\u003e✔ Spill-proof inserts prevent liquids from being absorbed into the fabric\u003cbr\u003e✔ Durable 3D-printed construction is lightweight yet durable\u003c\/p\u003e\n\u003cp\u003eThis complete kit will perfectly complement the interior of your VW T6, combining functionality with customization options.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497864802687,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/be9030b1-il_fullxfull.7271097361_oav1.jpg?v=1790885830"},{"product_id":"cup-holder-for-volkswagen-golf-mk3-door-pocket-drink-holder-oem-style-interior-upgrade","title":"Cup Holder for Volkswagen Golf Mk3 | Door Pocket Drink Holder | OEM-Style Interior Upgrade","description":"\u003cp\u003eCup Holder for Volkswagen Golf Mk3 | Door Pocket Drink Holder | OEM-Style Interior Upgrade\u003c\/p\u003e\n\u003cp\u003eBring modern practicality to your classic Volkswagen Golf Mk3 with this custom-designed Door Pocket Cup Holder.\u003cbr\u003eEngineered to sit securely inside the factory door storage compartment, it offers a perfect spot for your drink without drilling, cutting, or modifying your interior.\u003c\/p\u003e\n\u003cp\u003eWhether you’re daily-driving your Mk3 or enjoying weekend cruises, this cup holder adds real usability while maintaining the clean factory look that enthusiasts love.\u003c\/p\u003e\n\u003cp\u003eWhy You’ll Love It\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Volkswagen Golf Mk3 (1991–1999)\u003cbr\u003eNo universal fit — this part is shaped to match the original Mk3 door pocket.\u003c\/p\u003e\n\u003cp\u003eOEM+ integration\u003cbr\u003eBlends seamlessly with the interior, preserving original style and ergonomics.\u003c\/p\u003e\n\u003cp\u003eSecure fit for most standard drinks\u003cbr\u003eSupports cups, bottles, soda cans, and energy drinks.\u003c\/p\u003e\n\u003cp\u003eNo permanent modifications\u003cbr\u003eInstalls inside the existing storage pocket — no screws, glue, or cutting required.\u003c\/p\u003e\n\u003cp\u003eMade from durable automotive-grade ASA plastic\u003cbr\u003eHeat resistant, UV resistant, and built to handle daily use in hot climates.\u003c\/p\u003e\n\u003cp\u003eMaterial \u0026amp; Finish\u003c\/p\u003e\n\u003cp\u003eMaterial: ASA (preferred choice for automotive interiors — heat\/UV resistant)\u003c\/p\u003e\n\u003cp\u003eFinish: Matte Black — ready to install, durable OEM-style look\u003cbr\u003eFor the most aesthetic finish, a light sanding or painting may be applied if desired.\u003c\/p\u003e\n\u003cp\u003eVehicle Compatibility\u003c\/p\u003e\n\u003cp\u003eVolkswagen Golf Mk3 (1991–1999)\u003c\/p\u003e\n\u003cp\u003eMay also fit other Mk3 platform models with identical door pocket dimensions.\u003c\/p\u003e\n\u003cp\u003ePerfect For:\u003c\/p\u003e\n\u003cp\u003e✔ Daily drivers\u003cbr\u003e✔ OEM+ enthusiasts\u003cbr\u003e✔ Clean interior upgrades\u003cbr\u003e✔ Long trips \/ commuting\u003cbr\u003e✔ Restored or preserved Mk3 builds\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497864999295,"sku":null,"price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/443af76b-il_fullxfull.7442943362_1poa.jpg?v=1791204951"},{"product_id":"1994-nissan-d21-hardbody-cup-holder-coin-tray-ashtray-replacement-black","title":"1994 Nissan D21 Hardbody Cup Holder \u0026 Coin Tray | Ashtray Replacement black","description":"\u003cp\u003eCup Holder \/ Coin Tray Replacement for 1994 Nissan Hardbody\u003c\/p\u003e\n\u003cp\u003eThis custom cup holder + coin tray set replaces the original ashtray in the 1994 Nissan Hardbody (D21).\u003cbr\u003eThese trucks never had a practical cup holder in this location, so this upgrade adds modern usability without altering the character of your interior.\u003c\/p\u003e\n\u003cp\u003eThe cup holder mounts where the factory ashtray sits, and the coin tray attaches to the back of the cup holder using the built-in pegs.\u003c\/p\u003e\n\u003cp\u003eTo assemble the two parts:\u003c\/p\u003e\n\u003cp\u003eAlign the pegs from the coin tray with the matching holes on the back of the cup holder.\u003c\/p\u003e\n\u003cp\u003eInsert them fully.\u003c\/p\u003e\n\u003cp\u003eApply a small amount of super glue (cyanoacrylate) or strong plastic adhesive.\u003c\/p\u003e\n\u003cp\u003eHold in place until the glue sets.\u003c\/p\u003e\n\u003cp\u003eOnce assembled, the part installs just like the factory ashtray and provides a sturdy, reliable cup holder and small storage area.\u003c\/p\u003e\n\u003cp\u003ePrinted from automotive-grade ASA, it is UV-resistant, heat-resistant, and durable — perfect for older trucks that get sun exposure.\u003c\/p\u003e\n\u003cp\u003e⚙️ Features\u003c\/p\u003e\n\u003cp\u003eFits 1994 Nissan Hardbody D21 (ashtray replacement)\u003c\/p\u003e\n\u003cp\u003eCup holder + coin tray two-piece set\u003c\/p\u003e\n\u003cp\u003eCoin tray attaches using alignment pegs\u003c\/p\u003e\n\u003cp\u003eAssembly requires a dab of glue (super glue works well)\u003c\/p\u003e\n\u003cp\u003eDrop-in install — replaces factory ashtray\u003c\/p\u003e\n\u003cp\u003eMade from UV-stable ASA\u003c\/p\u003e\n\u003cp\u003ePractical storage and cup space for classic trucks\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e🎨 Finish\u003c\/p\u003e\n\u003cp\u003eMatte black ASA.\u003cbr\u003eCan be used as-is, or sanded\/painted for an OEM-style texture.\u003c\/p\u003e\n\u003cp\u003e⚠️ Note\u003c\/p\u003e\n\u003cp\u003e👉 Glue required to attach the coin tray to the back of the cup holder.\u003cbr\u003e👉 Sold as a set (cup holder + coin tray).\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1 × Cup Holder\u003c\/p\u003e\n\u003cp\u003e1 × Coin Tray (with pegs for attachment)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497865752959,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/51636daa-il_fullxfull.7397290014_3hzu.jpg?v=1765066302"},{"product_id":"mercedes-190e-front-position-cup-holder-optimized-for-comfort-access-black","title":"Mercedes 190E Front-Position Cup Holder – Optimized for Comfort \u0026 Access black","description":"\u003cp\u003eMercedes 190E Front-Position Cup Holder – Optimized for Comfort \u0026amp; Access\u003c\/p\u003e\n\u003cp\u003eThis custom cup holder is designed specifically for the Mercedes-Benz 190E (W201) to finally add practical drink storage without sacrificing comfort or functionality.\u003cbr\u003eThe holder positions your drinks forward and slightly to the side, allowing you to:\u003c\/p\u003e\n\u003cp\u003e✔ Keep using the center armrest comfortably\u003cbr\u003e✔ Maintain full access to the emergency brake\u003cbr\u003e✔ Avoid interference with the shifter\u003c\/p\u003e\n\u003cp\u003ePerfect for daily use, road trips, and modernizing the interior of the classic 190E.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDual cup design – Fits two drinks securely.\u003c\/p\u003e\n\u003cp\u003eSide tray compartment – Useful for keys, coins, cards, and small accessories.\u003c\/p\u003e\n\u003cp\u003eForward offset placement – Keeps the armrest free and ensures smooth e-brake operation.\u003c\/p\u003e\n\u003cp\u003eVehicle-specific fit – Designed to sit perfectly in the factory console pocket area.\u003c\/p\u003e\n\u003cp\u003eStable \u0026amp; practical – Holds drinks securely while driving.\u003c\/p\u003e\n\u003cp\u003e🛠 Precise Dimensions\u003c\/p\u003e\n\u003cp\u003eOverall size: 219.6 mm × 120.1 mm × 100 mm\u003c\/p\u003e\n\u003cp\u003ePrinted as a single, solid piece for strength.\u003c\/p\u003e\n\u003cp\u003eTall enough to hold cups securely without wobbling.\u003c\/p\u003e\n\u003cp\u003e🧵 High-Quality 3D Printed Production\u003c\/p\u003e\n\u003cp\u003eEach part is 3D printed with high precision using premium-grade filament for durability and a clean finish.\u003cbr\u003eThe product is ready to use out of the box, but for a flawless aesthetic you may lightly sand and\/or paint if desired — optional, not required.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e✔ 1× Mercedes 190E Dual Cup Holder Assembly\u003cbr\u003e✔ Ready to install — no tools required\u003cbr\u003e✔ Clean, functional, OEM-style black finish\u003c\/p\u003e\n\u003cp\u003e🚗 Compatible With\u003c\/p\u003e\n\u003cp\u003eMercedes-Benz 190E \/ W201 (all years)\u003c\/p\u003e\n\u003cp\u003e🛑 Note\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket, custom-designed product — not an OEM Mercedes part.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497865851263,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/9895e571-il_fullxfull.7448143585_5yss.jpg?v=1765065891"},{"product_id":"bmw-e46-rear-ashtray-delete-cup-holder-storage-insert-1998-2006","title":"BMW E46 Rear Ashtray Delete – Cup Holder + Storage Insert (1998–2006)","description":"\u003cp\u003eBMW E46 Rear Ashtray Delete – Cup Holder + Storage Insert (1998–2006)\u003c\/p\u003e\n\u003cp\u003eUpgrade your BMW E46 interior with a smart, functional rear ashtray replacement. This custom insert adds a full-size cup holder and a handy storage tray, giving rear passengers real convenience without harming OEM aesthetics.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically to replace the factory rear ashtray located between the back seats — no cutting, drilling, or trimming required. Just slide it in and enjoy.\u003c\/p\u003e\n\u003cp\u003e🔧 Key Features\u003c\/p\u003e\n\u003cp\u003ePerfect fit for BMW E46 (1998–2006)\u003c\/p\u003e\n\u003cp\u003eDirect OEM replacement for rear ashtray\u003c\/p\u003e\n\u003cp\u003e1 full-size cup holder (standard bottles, cans, cups)\u003c\/p\u003e\n\u003cp\u003ePlus small storage compartment (keys, coins, cable, phone)\u003c\/p\u003e\n\u003cp\u003eClean OEM-style design — blends seamlessly with the interior\u003c\/p\u003e\n\u003cp\u003eDurable 3D-printed construction\u003c\/p\u003e\n\u003cp\u003e🎨 Color\u003c\/p\u003e\n\u003cp\u003eBlack — factory-style matte finish\u003c\/p\u003e\n\u003cp\u003e🚘 Compatibility\u003c\/p\u003e\n\u003cp\u003eFits all BMW E46 models:\u003c\/p\u003e\n\u003cp\u003eSedan\u003c\/p\u003e\n\u003cp\u003eCoupe\u003c\/p\u003e\n\u003cp\u003eConvertible\u003c\/p\u003e\n\u003cp\u003eTouring (Wagon)\u003c\/p\u003e\n\u003cp\u003eThis insert was designed specifically for the rear ashtray area and has been test-fitted on multiple E46 interiors.\u003c\/p\u003e\n\u003cp\u003e🛠 Installation\u003c\/p\u003e\n\u003cp\u003eRemove the original ashtray unit\u003c\/p\u003e\n\u003cp\u003eSlide the insert into place\u003c\/p\u003e\n\u003cp\u003eDone — a functional upgrade in seconds\u003c\/p\u003e\n\u003cp\u003e📦 Material \u0026amp; Finish\u003c\/p\u003e\n\u003cp\u003ePrinted in high-quality durable filament suitable for automotive interiors.\u003cbr\u003eDesigned to withstand day-to-day use, sun exposure, and temperature changes.\u003c\/p\u003e\n\u003cp\u003eFor the most aesthetically perfect finish, we recommend lightly sanding and painting if desired.\u003cbr\u003eOur parts are printed with high precision and do not require post-processing, but may show minimal layer traces or support marks typical of 3D printing.\u003c\/p\u003e\n\u003cp\u003e🏁 Why Choose This Upgrade?\u003c\/p\u003e\n\u003cp\u003eGives your rear passengers a real cup holder\u003c\/p\u003e\n\u003cp\u003eEliminates the useless OEM ashtray\u003c\/p\u003e\n\u003cp\u003eDesigned for daily use\u003c\/p\u003e\n\u003cp\u003eLooks factory — not aftermarket\u003c\/p\u003e\n\u003cp\u003eIf you want custom colors or a different version (dual cup holder, storage only, etc.), send me a message — I love working with E46 owners ❤️\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Black","offer_id":58593469792639,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":58593469825407,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/Screenshot_2026-10-01_211336.png?v=1790883805"},{"product_id":"bmw-e36-cup-holder-3d-printed-center-console-insert","title":"BMW E36 Cup Holder: 3D-Printed Center Console Insert","description":"\u003cp\u003eBMW E36 Cup Holder | Dual Cup Holder\u003c\/p\u003e\n\u003cp\u003eSay goodbye to spilled drinks and awkward cup placement with this custom BMW E36 cup holder, designed with OEM+ functionality and style in mind. This upgraded center console insert offers two cup holders and includes a button slot and mini storage tray – perfect for coins, keys or small essentials.\u003c\/p\u003e\n\u003cp\u003eDesigned to fit snugly into the center console of your BMW E36, it’s the perfect combination of convenience and clean design. Whether you’re a daily commuter or heading out on a spirited road trip, this item enhances the usability of the cabin without sacrificing style.\u003c\/p\u003e\n\u003cp\u003e📐 Applicability: BMW E36 (all models: coupe, sedan, convertible)\u003cbr\u003e🎨 Design: Button compartment + coin\/pouch compartment + 2 cup holders\u003cbr\u003e🧩 Installation: Direct installation - no cutting, no modifications needed\u003cbr\u003e⚙️ Material: High-quality, durable plastic, 3D printed\u003cbr\u003e🖤 Color: Matte black\u003c\/p\u003e\n\u003cp\u003eNote: Designed for standard cup sizes. Some larger bottles may not fit.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Black","offer_id":58588153938303,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":58588153971071,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/692a69f9-il_fullxfull.6785046398_csr8.jpg?v=1764533185"},{"product_id":"jza80-toyota-supra-cup-holder-oem-style-replacement","title":"JZA80 Toyota Supra Cup Holder — OEM-style Replacement","description":"\u003cp\u003eJZA80 Toyota Supra Cup Holder — OEM-style Replacement\u003c\/p\u003e\n\u003cp\u003eFinally, a functional and clean cup holder for the Toyota Supra MK4 (JZA80).\u003cbr\u003eDesigned to replace the original ashtray\/cup insert and mount directly into the factory screw points — no cutting, no drilling, 100% reversible install.\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003c\/p\u003e\n\u003cp\u003eDirect fit for Toyota Supra JZA80 (MK4)\u003c\/p\u003e\n\u003cp\u003eBolts into the OEM mounting points using factory screws\u003c\/p\u003e\n\u003cp\u003eSecurely holds cups, bottles, small thermoses\u003c\/p\u003e\n\u003cp\u003eDurable ASA\u003c\/p\u003e\n\u003cp\u003eClean OEM-style appearance\u003c\/p\u003e\n\u003cp\u003eNo modifications required\u003c\/p\u003e\n\u003cp\u003eMK4 interiors differ slightly (RHD\/LHD, ashtray revisions).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e⭐ Installation\u003c\/p\u003e\n\u003cp\u003eOpen the center console.\u003c\/p\u003e\n\u003cp\u003eRemove the OEM ashtray\/cup piece (2–4 screws depending on version).\u003c\/p\u003e\n\u003cp\u003ePlace the new cup holder in the same location.\u003c\/p\u003e\n\u003cp\u003eReinstall using the original screws.\u003c\/p\u003e\n\u003cp\u003eOEM fit, OEM look, better functionality.\u003c\/p\u003e\n\u003cp\u003e⭐ Important\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed part — minor layer texture is normal.\u003cbr\u003eFor a show-quality finish: light sanding + primer + paint works perfectly.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Main cup holder body\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions\u003c\/p\u003e\n\u003cp\u003e104.9 × 132.1 × 73.5 mm (model size)\u003cbr\u003eFits most 75–80mm cups\u003c\/p\u003e\n\u003cp\u003e❤️ Respect to the Original Designer — bondango\u003c\/p\u003e\n\u003cp\u003eThis product is based on the thoughtful original work of bondango, who created the initial design concept and engineering layout.\u003cbr\u003eMassive respect to him for the creativity, clean CAD work, and the effort that helped revive a rare and much-needed accessory for the Supra community.\u003c\/p\u003e\n\u003cp\u003eWe produce each physical unit with care, upgraded materials, and improved print quality — but the original design vision belongs to bondango.\u003c\/p\u003e\n\u003cp\u003e❤️ For Supra Enthusiasts\u003c\/p\u003e\n\u003cp\u003eA clean, functional upgrade that finally fixes the MK4’s center-console practicality while keeping the OEM feel.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497866965375,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/eb828351-il_fullxfull.7416806452_wsaz.jpg?v=1764533185"},{"product_id":"ford-mustang-sn95-cup-holder-1994-1995-ashtray-replacement-dual-cupholder","title":"Ford Mustang SN95 Cup Holder (1994-1995) | Ashtray Replacement Dual Cupholder","description":"\u003cp\u003eCupholder for 1994–1995 Ford Mustang SN95 — Ashtray Replacement\u003c\/p\u003e\n\u003cp\u003eUpgrade the center console of your 94–95 Mustang with this custom dual cup holder that replaces the factory ashtray insert. Designed to snap in securely using the original ashtray opening, this part gives you modern usability while keeping the interior OEM-style clean.\u003c\/p\u003e\n\u003cp\u003ePerfect fit, strong construction and a much more functional interior for daily driving.\u003c\/p\u003e\n\u003cp\u003e⭐ Fitment\u003c\/p\u003e\n\u003cp\u003e✔ Ford Mustang SN95 (1994, 1995)\u003cbr\u003e✔ V6 \/ GT \/ Cobra\u003cbr\u003e✔ Replaces factory ashtray insert\u003cbr\u003e✔ No permanent modifications needed\u003c\/p\u003e\n\u003cp\u003e🧩 Product Details\u003c\/p\u003e\n\u003cp\u003eDual cup holder design\u003c\/p\u003e\n\u003cp\u003eHolds most standard cups, bottles, cans and travel mugs\u003c\/p\u003e\n\u003cp\u003eSnaps into the original ashtray slot\u003c\/p\u003e\n\u003cp\u003eSmooth edges and OEM-inspired shape\u003c\/p\u003e\n\u003cp\u003e📏 Dimensions\u003c\/p\u003e\n\u003cp\u003e193.7 × 101.6 × 134.9 mm\u003c\/p\u003e\n\u003cp\u003eLength: 19.3 cm\u003c\/p\u003e\n\u003cp\u003eWidth: 10.1 cm\u003c\/p\u003e\n\u003cp\u003eHeight: 13.5 cm\u003c\/p\u003e\n\u003cp\u003e🖨 3D Printed Quality — Read Before Buying\u003c\/p\u003e\n\u003cp\u003eThis part is 3D printed in high-temperature ASA, ideal for automotive use.\u003cbr\u003eDue to the nature of 3D printing:\u003c\/p\u003e\n\u003cp\u003eMinor layer lines are possible\u003c\/p\u003e\n\u003cp\u003eLight sanding\/finishing can be done for a perfect show-car look\u003c\/p\u003e\n\u003cp\u003eStrength and heat resistance far exceed PLA versions from other shops\u003c\/p\u003e\n\u003cp\u003eEvery item is printed with premium filament and inspected before shipping.\u003c\/p\u003e\n\u003cp\u003e🔥 Why This Is Better Than the Commercial Cupholder?\u003c\/p\u003e\n\u003cp\u003eSame functionality\u003c\/p\u003e\n\u003cp\u003eBetter fitment\u003c\/p\u003e\n\u003cp\u003eMore attractive rounded design\u003c\/p\u003e\n\u003cp\u003eCosts less\u003c\/p\u003e\n\u003cp\u003eMade to order\u003c\/p\u003e\n\u003cp\u003eFull support from CarCultureCyprus\u003c\/p\u003e\n\u003cp\u003e📦 What You Get\u003c\/p\u003e\n\u003cp\u003e1x Cupholder (ashtray replacement)\u003c\/p\u003e\n\u003cp\u003eReady to install\u003c\/p\u003e\n\u003cp\u003e🛠 Installation\u003c\/p\u003e\n\u003cp\u003eRemove the factory metal ashtray insert\u003c\/p\u003e\n\u003cp\u003eSnap this cup holder into place\u003c\/p\u003e\n\u003cp\u003eDone — no screws, no drilling, no modifications\u003c\/p\u003e\n\u003cp\u003eTakes less than 10 seconds.\u003c\/p\u003e\n\u003cp\u003e❤️ Designed by the Community\u003c\/p\u003e\n\u003cp\u003eSpecial thanks to the creator for the original concept.\u003cbr\u003ePrinted, refined and quality-checked by CarCultureCyprus.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497867161983,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/85cf212b-il_fullxfull.7416711738_i0uz.jpg?v=1765064930"},{"product_id":"toyota-mr2-sw20-cup-holder-center-console-single-holder-insert-fits-1990-1999","title":"Toyota MR2 SW20 Cup Holder | Center Console Single Holder Insert | Fits 1990–1999","description":"\u003cp\u003eToyota MR2 SW20 Cup Holder | Center Console Single Holder Insert | Fits 1990–1999\u003c\/p\u003e\n\u003cp\u003eUpgrade your Toyota MR2 SW20 (1990–1999) with a practical center console single cup holder insert, designed to mount directly using the two OEM lid screws inside the storage compartment.\u003c\/p\u003e\n\u003cp\u003eThis insert fits securely, stays stable even during spirited driving, and perfectly holds larger thermos-style mugs such as Camelbak, travel mugs, cans, and bottles.\u003c\/p\u003e\n\u003cp\u003e🔧 Fitment\u003c\/p\u003e\n\u003cp\u003e✔ Fits Toyota MR2 SW20 (all years 1990–1999)\u003cbr\u003e✔ Mounts using the two original lid screws inside the center console storage bin\u003cbr\u003e✔ No trimming or modifications required\u003cbr\u003e✔ Designed to hold large mugs firmly in place\u003cbr\u003e✔ Perfect for daily driving, long trips, and track-day convenience\u003c\/p\u003e\n\u003cp\u003eBecause SW20 interiors vary slightly with age, a tiny adjustment or sanding may rarely be needed — normal for 30-year-old cars.\u003c\/p\u003e\n\u003cp\u003e🛠 About the Part\u003c\/p\u003e\n\u003cp\u003eThis is a professionally 3D-printed component.\u003cbr\u003eLayer lines are normal.\u003cbr\u003eIf you want a factory-smooth plastic look, it can be sanded and painted by hand.\u003c\/p\u003e\n\u003cp\u003ePrinted in ASA — heat-resistant and ideal for hot interiors.\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Toyota MR2 SW20 Single Centre Cup Holder\u003cbr\u003e(Attaches using your existing console screw holes)\u003c\/p\u003e\n\u003cp\u003eMounting screws are reused from the car — no hardware included.\u003c\/p\u003e\n\u003cp\u003e📏 Dimensions\u003c\/p\u003e\n\u003cp\u003e(110 × 123 × 50 mm)\u003c\/p\u003e\n\u003cp\u003eLength: 4.33 in\u003c\/p\u003e\n\u003cp\u003eWidth: 4.84 in\u003c\/p\u003e\n\u003cp\u003eHeight: 1.97 in\u003c\/p\u003e\n\u003cp\u003eCup inner diameter: ideal for thermos-style mugs (similar to Camelbak)\u003c\/p\u003e\n\u003cp\u003e❤️ Notes\u003c\/p\u003e\n\u003cp\u003eThis is not an OEM Toyota product.\u003cbr\u003eIt is a custom-designed upgrade for SW20 interior convenience.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497867293055,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/fc8aad4f-il_fullxfull.7416285746_ck6r.jpg?v=1764533188"},{"product_id":"gq-nissan-patrol-y60-deep-cup-holder-improved-replacement-for-oem-shallow-holder","title":"GQ Nissan Patrol (Y60) Deep Cup Holder – Improved Replacement for OEM Shallow Holder","description":"\u003cp\u003eGQ Nissan Patrol (Y60) Deep Cup Holder – Improved Replacement for OEM Shallow Holder\u003c\/p\u003e\n\u003cp\u003eFinally fix the factory cup holder problem in the Nissan Patrol GQ \/ Y60.\u003cbr\u003eThe original cup holder is extremely shallow — drinks fall over, cans wobble, bottles don’t fit.\u003cbr\u003eThis deep double cup holder is a direct replacement that actually works.\u003c\/p\u003e\n\u003cp\u003eDesigned from the OEM shape and refined based on community feedback.\u003cbr\u003eDrop-in fit. No tools needed.\u003c\/p\u003e\n\u003cp\u003e⭐ Why This Cup Holder Is Better\u003c\/p\u003e\n\u003cp\u003eMuch deeper than the factory part\u003c\/p\u003e\n\u003cp\u003eHolds cans, bottles, mugs, takeaway cups\u003c\/p\u003e\n\u003cp\u003eDual cup layout\u003c\/p\u003e\n\u003cp\u003eStrong, reinforced design\u003c\/p\u003e\n\u003cp\u003eSmooth edges and clean finish\u003c\/p\u003e\n\u003cp\u003eDrop-in fit for the original console location\u003c\/p\u003e\n\u003cp\u003eNo wobbling, no tipping, no spills\u003c\/p\u003e\n\u003cp\u003eThis is the cup holder the GQ should’ve come with from factory.\u003c\/p\u003e\n\u003cp\u003e⭐ Fitment\u003c\/p\u003e\n\u003cp\u003e✔ Nissan Patrol GQ \/ Y60\u003cbr\u003e✔ All years\u003cbr\u003e✔ Fits in the original center console slot\u003c\/p\u003e\n\u003cp\u003eFitment has been tweaked and confirmed by multiple users who tested earlier versions.\u003c\/p\u003e\n\u003cp\u003e⭐ Based on Real User Experience\u003c\/p\u003e\n\u003cp\u003eThis version is already refined, adjusted and verified\u003c\/p\u003e\n\u003cp\u003eYou receive a professionally printed part with correct tolerances\u003c\/p\u003e\n\u003cp\u003e⭐ Installation\u003c\/p\u003e\n\u003cp\u003eNo screws\u003c\/p\u003e\n\u003cp\u003eNo trimming\u003c\/p\u003e\n\u003cp\u003eNo modifications\u003c\/p\u003e\n\u003cp\u003eSimply place it in the factory position\u003c\/p\u003e\n\u003cp\u003eDone\u003c\/p\u003e\n\u003cp\u003e⭐ Material \u0026amp; Quality\u003c\/p\u003e\n\u003cp\u003ePrinted from durable, heat-resistant automotive-grade material.\u003cbr\u003eDesigned for everyday use, off-road vibrations, and direct sunlight.\u003c\/p\u003e\n\u003cp\u003e⭐ Dimensions\u003c\/p\u003e\n\u003cp\u003eApprox. 186 × 134 × 89 mm\u003cbr\u003e(Perfect depth for Australian cans and coffee cups.)\u003c\/p\u003e\n\u003cp\u003e⭐ What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Deep Dual Cup Holder\u003c\/p\u003e\n\u003cp\u003e⭐ Perfect For\u003c\/p\u003e\n\u003cp\u003eDaily driving\u003c\/p\u003e\n\u003cp\u003eOff-road use\u003c\/p\u003e\n\u003cp\u003eCoffee cups\u003c\/p\u003e\n\u003cp\u003eBottles and cans\u003c\/p\u003e\n\u003cp\u003eAnyone who wants their GQ to finally have real cup holders\u003c\/p\u003e\n\u003cp\u003e⭐ Important Note About 3D Printed Parts\u003c\/p\u003e\n\u003cp\u003eThis product is professionally 3D printed, not injection-molded like factory plastic.\u003cbr\u003eYou may see light layer lines or small surface textures typical for high-quality 3D prints.\u003c\/p\u003e\n\u003cp\u003eThe part is fully functional and ready to use out of the box.\u003c\/p\u003e\n\u003cp\u003eIf you want a perfect “show car finish”\u003cbr\u003e(smooth like factory \/ painted surface), you can lightly sand, prime, and paint the part to match your interior.\u003cbr\u003eMany customers do this for custom builds and restored vehicles.\u003c\/p\u003e\n\u003cp\u003eThis allows you to choose your own finish — OEM style, matte, textured, or color-matched.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497867489663,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/138a6005-il_fullxfull.7415861250_enxv.jpg?v=1764533184"},{"product_id":"bmw-e34-cup-holder-3d-printed-center-console-insert","title":"BMW E34 Cup Holder: 3D-Printed Center Console Insert","description":"\u003cp\u003eBMW E34 cup holder\u003c\/p\u003e\n\u003cp\u003eUpgrade your BMW E34 interior with this custom-designed dual cup holder insert. Perfectly tailored to fit into the center console, this part provides a clean and secure solution for holding beverages without compromising OEM aesthetics. Designed for a snug fit with zero modifications, it easily snaps in place using the factory tray slot.\u003c\/p\u003e\n\u003cp\u003eCompatible with BMW E34 (1988–1996)\u003c\/p\u003e\n\u003cp\u003eDesigned to hold two standard-sized cups or bottles\u003c\/p\u003e\n\u003cp\u003eOEM-style appearance with a clean and functional finish\u003c\/p\u003e\n\u003cp\u003e3D-printed from high-quality ASA for durability\u003c\/p\u003e\n\u003cp\u003eNo drilling or cutting required – plug-and-play fit\u003c\/p\u003e\n\u003cp\u003eThis is a great upgrade for E34 owners who want modern convenience without altering the classic interior design.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497867719039,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/07a0858f-il_fullxfull.6963400878_gbma.jpg?v=1765064558"},{"product_id":"vauxhall-zafira-b-double-cup-holder","title":"Vauxhall Zafira B Double Cup Holder","description":"\u003cp\u003eVauxhall Zafira B Double Cup Holder\u003c\/p\u003e\n\u003cp\u003eVauxhall Zafira B Double Cup Holder — fits into the center console compartment and replaces the factory handbrake cover.\u003cbr\u003eIf you're tired of the original Zafira B cup holder constantly catching your drink every time you lift the handbrake — especially with anything larger than a standard can — this upgraded design is the perfect solution.\u003c\/p\u003e\n\u003cp\u003eThis improved double cup holder moves both cup positions further toward the rear, away from the handbrake arm, making daily use much more practical. It also includes a small coin\/storage pocket, adding useful functionality to an otherwise wasted space.\u003c\/p\u003e\n\u003cp\u003eWorks both as:\u003cbr\u003e✔️ A functional double cup holder\u003cbr\u003e✔️ A replacement handbrake cover if your original one is missing or damaged\u003c\/p\u003e\n\u003cp\u003e⭐ Features\u003cbr\u003e• Much better ergonomics than the OEM cup holder\u003c\/p\u003e\n\u003cp\u003eThe cups sit further back, which prevents the handbrake lever from hitting or tipping your drink when you lift it — a common issue in the Zafira B.\u003c\/p\u003e\n\u003cp\u003e• Fits perfectly into the central console compartment\u003c\/p\u003e\n\u003cp\u003eDesigned using the exact geometry of the Vauxhall Zafira B interior for a snug and stable drop-in fit.\u003c\/p\u003e\n\u003cp\u003e• Two cup holders + small coin\/storage box\u003c\/p\u003e\n\u003cp\u003eCarry two drinks safely and keep coins, keys or small items in the integrated mini tray.\u003c\/p\u003e\n\u003cp\u003e• Also works as a full handbrake cover\u003c\/p\u003e\n\u003cp\u003eIf your original trim piece is missing, cracked or worn — this part completely covers the opening and restores the clean look of the interior.\u003c\/p\u003e\n\u003cp\u003e• High-quality 3D printed construction\u003c\/p\u003e\n\u003cp\u003ePrinted with high resolution and structural accuracy using durable automotive-grade material.\u003cbr\u003eLike all 3D-printed products, minor layer lines or support marks may remain — for a perfect OEM-like finish, light sanding and optional painting is recommended.\u003c\/p\u003e\n\u003cp\u003e📌 Compatibility\u003c\/p\u003e\n\u003cp\u003eVauxhall Zafira B (2005–2014)\u003c\/p\u003e\n\u003cp\u003eFits manual and automatic versions\u003c\/p\u003e\n\u003cp\u003eDesigned for the center console handbrake area\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1× Double Cup Holder \/ Handbrake Cover Replacement\u003c\/p\u003e\n\u003cp\u003eReady to install — no tools required\u003c\/p\u003e\n\u003cp\u003e🛠️ Installation\u003c\/p\u003e\n\u003cp\u003eSimply drop it in place of the original handbrake cover.\u003cbr\u003eIt fits snugly and can be removed at any time.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497867882879,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/a6b629ba-il_fullxfull.7458540131_sntf.jpg?v=1765064179"},{"product_id":"audi-100-c4-center-console-cup-holder-custom-dual-drink-insert-black","title":"Audi 100 C4 Center Console Cup Holder – Custom Dual Drink Insert black","description":"\u003cp\u003eAudi 100 C4 Cup Holder\u003c\/p\u003e\n\u003cp\u003eCustom-fit cup holder designed specifically for the Audi 100 C4 center console (Avant \u0026amp; Sedan).\u003cbr\u003eThis insert replaces the original shallow storage pocket and provides two usable cup holder openings sized to match modern cups and bottles — without interfering with the handbrake or seatbelt buckles.\u003c\/p\u003e\n\u003cp\u003eThe holder is modeled to OEM dimensions and fits directly into the factory rectangular recess.\u003c\/p\u003e\n\u003cp\u003e✨ Features\u003c\/p\u003e\n\u003cp\u003ePerfect Fit for Audi 100 C4 (1989–1994)\u003cbr\u003eSized precisely to 160 × 70 × 50.5 mm to drop into the center console slot with no movement.\u003c\/p\u003e\n\u003cp\u003eDual-Cup Layout\u003cbr\u003eSmooth “figure-8” internal shape holds two drinks securely: coffee cups, bottles, cans, thermal mugs.\u003c\/p\u003e\n\u003cp\u003eOEM-Style Appearance\u003cbr\u003eClean, minimalistic design blends seamlessly with the original C4 interior.\u003c\/p\u003e\n\u003cp\u003eHigh-Quality 3D Printed Part\u003cbr\u003eProfessionally printed in high-quality premium filament with attention to detail and durability.\u003cbr\u003eAs with all 3D printed parts, minor layer lines or support marks may be visible.\u003cbr\u003eFor the most aesthetic appearance, light sanding and optional painting are recommended.\u003c\/p\u003e\n\u003cp\u003eDrop-in Installation\u003cbr\u003eNo screws, no cutting — simply place it into the console pocket.\u003c\/p\u003e\n\u003cp\u003e📏 Dimensions\u003c\/p\u003e\n\u003cp\u003eLength: 160 mm\u003c\/p\u003e\n\u003cp\u003eWidth: 70 mm\u003c\/p\u003e\n\u003cp\u003eHeight: 50.5 mm\u003c\/p\u003e\n\u003cp\u003eCup Openings: symmetric dual cup recesses with smooth transition shape matching the console geometry.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1× Audi 100 C4 custom cup holder (single solid piece)\u003c\/p\u003e\n\u003cp\u003e🛠 Material\u003c\/p\u003e\n\u003cp\u003ePrinted in premium, temperature-resistant plastic ASA, ideal for automotive interiors exposed to heat and sunlight.\u003c\/p\u003e\n\u003cp\u003e📌 Notes\u003c\/p\u003e\n\u003cp\u003eThis part is 3D-printed with excellent accuracy.\u003cbr\u003eHowever, for a perfect visual OEM finish, slight sanding and optional painting are recommended.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497868177791,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/c92b25fa-il_fullxfull.7448582859_pim0.jpg?v=1765063883"},{"product_id":"82-92-camaro-cup-holder-center-console-drink-fits-1982-1992-black","title":"82–92 Camaro Cup Holder | Center Console Drink | Fits 1982–1992 | black","description":"\u003cp\u003e82–92 Camaro Cup Holder | Center Console Drink Holder | Fits 1982–1992  | \u003c\/p\u003e\n\u003cp\u003eUpgrade your ’82–’92 Camaro interior with this custom dual cup holder designed to bolt directly into the factory ashtray location.\u003cbr\u003eThe stock third-gen Camaro interior was never designed for modern drink sizes — this insert fixes that without drilling, cutting, or modifying your console.\u003c\/p\u003e\n\u003cp\u003e✔ Fits perfectly into the OEM ashtray opening\u003cbr\u003e✔ Uses original mounting locations (screws not included)\u003cbr\u003e✔ Allows safe use of large drinks without wobble\u003cbr\u003e✔ Maintains full gear-shifter clearance\u003cbr\u003e✔ Deep, smooth cup wells with anti-twist bottom tabs\u003cbr\u003e✔ Looks like something GM would’ve installed from factory\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions \u003c\/p\u003e\n\u003cp\u003eLength: ~243.6 mm\u003c\/p\u003e\n\u003cp\u003eWidth: ~79.0 mm\u003c\/p\u003e\n\u003cp\u003eHeight: ~73.1 mm\u003c\/p\u003e\n\u003cp\u003eThese dimensions match the photo installation perfectly — the holder sits low enough not to interfere with shifting while giving maximum depth for stability.\u003c\/p\u003e\n\u003cp\u003e🧵 Material \u0026amp; Print Quality\u003c\/p\u003e\n\u003cp\u003eThis cup holder is 3D-printed in high-quality ASA, a strong automotive-grade material resistant to heat and UV — perfect for classic car interiors.\u003c\/p\u003e\n\u003cp\u003eEach part is printed with care, but like all 3D-printed items, minor layer lines or support marks may be visible.\u003cbr\u003eFor customers who want an absolutely perfect OEM-smooth finish, we recommend:\u003c\/p\u003e\n\u003cp\u003e✔ light sanding\u003cbr\u003e✔ primer\u003cbr\u003e✔ matte\/black interior-grade paint\u003c\/p\u003e\n\u003cp\u003eThis is optional — it can be used immediately as-is.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eRemove factory ashtray plate\u003c\/p\u003e\n\u003cp\u003ePosition the cup holder using the same opening\u003c\/p\u003e\n\u003cp\u003eSecure using factory screw locations\u003c\/p\u003e\n\u003cp\u003eEnjoy functional cup holders in your Camaro for the first time\u003c\/p\u003e\n\u003cp\u003eAbsolutely no cutting or interior modification required.\u003c\/p\u003e\n\u003cp\u003e🚗 Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Chevrolet Camaro 1982–1992\u003cbr\u003eAll trims: Base, Berlinetta, Z28, IROC-Z, RS\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497868276095,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/d8307762-il_fullxfull.7448455031_43t1.jpg?v=1765061266"},{"product_id":"smart-fortwo-450-cup-holder-secure-bolt-on-mount-fits-oem-side-bracket-black","title":"Smart Fortwo 450 Cup Holder — Secure Bolt-On Mount | Fits OEM Side Bracket | black","description":"\u003cp\u003eSmart Fortwo 450 Cup Holder — Secure Bolt-On Mount | Fits OEM Side Bracket | 3D Printed in High Quality\u003c\/p\u003e\n\u003cp\u003eUpgrade the interior of your Smart Fortwo 450 with this practical and sturdy bolt-on cup\/drink holder.\u003cbr\u003eDesigned specifically for the 450 chassis, it mounts directly to the OEM side bracket using the factory screw location — providing a rock-solid, rattle-free fit.\u003c\/p\u003e\n\u003cp\u003eThis holder places your drink within easy reach while driving, solving the well-known “no cupholder space” problem in the early Smart models.\u003c\/p\u003e\n\u003cp\u003e✔️ Key Features\u003cbr\u003e🔧 Perfect Fit for Smart Fortwo 450\u003c\/p\u003e\n\u003cp\u003eEngineered to bolt directly onto the existing screw point on the side of the center tunnel.\u003cbr\u003eNo modifications required — simply remove the screw, position the holder, and re-install.\u003c\/p\u003e\n\u003cp\u003e🥤 Holds a Variety of Cup and Bottle Sizes\u003c\/p\u003e\n\u003cp\u003e– Standard takeaway coffee cups\u003cbr\u003e– Water bottles\u003cbr\u003e– Small thermoses\u003cbr\u003e– Energy drink cans\u003cbr\u003e– Reusable bottles\u003cbr\u003eThe cylindrical compartment has generous internal clearance for everyday drink sizes.\u003c\/p\u003e\n\u003cp\u003e📱 Extra Storage Compartment\u003c\/p\u003e\n\u003cp\u003eIncludes a small rectangular tray for:\u003cbr\u003e– keys\u003cbr\u003e– coins\u003cbr\u003e– receipts\u003cbr\u003e– parking tokens\u003cbr\u003e– charging adapters\u003c\/p\u003e\n\u003cp\u003e⚙️ Strong, Thick-Wall Design\u003c\/p\u003e\n\u003cp\u003ePrinted with reinforced geometry for durability and vibration resistance.\u003cbr\u003eMade to withstand daily use in city driving.\u003c\/p\u003e\n\u003cp\u003e🖨️ High-Quality 3D Printed Finish\u003c\/p\u003e\n\u003cp\u003ePrinted on a professional-grade 3D printer with:\u003cbr\u003e– high precision\u003cbr\u003e– clean surface finish\u003cbr\u003e– strong layer adhesion\u003c\/p\u003e\n\u003cp\u003eAs with all 3D-printed parts, a light sanding and optional painting can improve aesthetics — recommended for a perfectly smooth look.\u003c\/p\u003e\n\u003cp\u003e📐 Dimensions (from model file)\u003c\/p\u003e\n\u003cp\u003eOverall size:\u003cbr\u003e– Length: ~161 mm\u003cbr\u003e– Width: ~90 mm\u003cbr\u003e– Height: ~111 mm\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e✔ 1× Cup holder for Smart Fortwo 450\u003cbr\u003e✔ Ready to install, bolt-on design\u003cbr\u003e✔ Printed in durable automotive-grade material (ASA by default)\u003c\/p\u003e\n\u003cp\u003e🚗 Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Smart Fortwo 450 (ALL years with OEM bolt mount point)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497868210559,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/b4923c4b-il_fullxfull.7448028393_dytg.jpg?v=1765061169"},{"product_id":"chevy-colorado-2015-2023-dual-cup-holder-3-piece-console-upgrade-black","title":"Chevy Colorado 2015–2023 Dual Cup Holder | 3-Piece Console Upgrade | black","description":"\u003cp\u003eDual Cup Holder Upgrade for Chevy Colorado \u0026amp; GMC Canyon (2015–2023)\u003c\/p\u003e\n\u003cp\u003eThis three-piece dual cup holder adds an additional drink space to your Chevy Colorado or GMC Canyon interior.\u003cbr\u003eThe factory console only offers a limited amount of cup space — especially for larger bottles or when carrying multiple drinks.\u003cbr\u003eThis upgrade solves the issue by giving you room for a third drink, including water canisters, travel mugs, and standard bottles.\u003c\/p\u003e\n\u003cp\u003eTested on 2015–2023 Colorado\/Canyon, including 2019 models.\u003c\/p\u003e\n\u003cp\u003eThe cup holder is printed in three separate parts for optimal strength, printability, and surface finish:\u003c\/p\u003e\n\u003cp\u003eOnce assembled with glue, the unit drops directly into the center console and fits securely with no rattling.\u003c\/p\u003e\n\u003cp\u003e🧩 Three-Piece Modular Construction\u003c\/p\u003e\n\u003cp\u003eYour set includes three parts:\u003c\/p\u003e\n\u003cp\u003e1️⃣ Lower stabilizer section that locks the unit in place.\u003c\/p\u003e\n\u003cp\u003e2️⃣Main cup housing designed to accommodate standard drinks, water bottles, and medium-sized canisters.\u003c\/p\u003e\n\u003cp\u003e3️⃣The upper insert\/divider that forms the dual-holder layout and creates separation for two different drink sizes.\u003c\/p\u003e\n\u003cp\u003eThese pieces are designed to fit tightly together and should be glued using super glue (cyanoacrylate) or plastic adhesive.\u003c\/p\u003e\n\u003cp\u003e🛠 Assembly \u0026amp; Installation\u003c\/p\u003e\n\u003cp\u003eDry-fit all three parts to check alignment\u003c\/p\u003e\n\u003cp\u003eApply glue to the joining surfaces\u003c\/p\u003e\n\u003cp\u003ePress pieces together firmly\u003c\/p\u003e\n\u003cp\u003eAllow adhesive to cure\u003c\/p\u003e\n\u003cp\u003ePlace the assembled unit into the existing console space\u003c\/p\u003e\n\u003cp\u003eNo screws, drilling, or permanent modifications required\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e⚙️ Features\u003c\/p\u003e\n\u003cp\u003eFits Chevy Colorado 2015–2023\u003c\/p\u003e\n\u003cp\u003eFits GMC Canyon 2015–2023\u003c\/p\u003e\n\u003cp\u003eAdds space for a third drink\u003c\/p\u003e\n\u003cp\u003eAccepts bottles, cans, water canisters, travel mugs\u003c\/p\u003e\n\u003cp\u003eThree-piece modular design\u003c\/p\u003e\n\u003cp\u003eEasy assembly with glue\u003c\/p\u003e\n\u003cp\u003eDrop-in console fit\u003c\/p\u003e\n\u003cp\u003eStable and rattle-free\u003c\/p\u003e\n\u003cp\u003eMade from UV-resistant ASA\u003c\/p\u003e\n\u003cp\u003e❗ Compatibility Notes\u003c\/p\u003e\n\u003cp\u003e❌ Does NOT fit Toyota Tacoma 2010\u003cbr\u003e(based on frequent user questions)\u003c\/p\u003e\n\u003cp\u003e✔ Confirmed by users to fit 2015–2023 Colorado\/Canyon\u003c\/p\u003e\n\u003cp\u003e❗ Center console must be the standard factory configuration\u003c\/p\u003e\n\u003cp\u003e🎨 Finish\u003c\/p\u003e\n\u003cp\u003eMatte black ASA.\u003cbr\u003eCan be sanded or painted for a factory-matched finish.\u003c\/p\u003e\n\u003cp\u003e⚠️ Important\u003c\/p\u003e\n\u003cp\u003e👉 Sold unassembled (3 pieces). Requires simple gluing.\u003cbr\u003e👉 Can hold large bottles but ultra-wide canisters may require checking dimensions.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1 × Сup Bottom\u003c\/p\u003e\n\u003cp\u003e1 × Сup housing\u003c\/p\u003e\n\u003cp\u003e1 × Вivider\/top insert\u003cbr\u003e(All parts unassembled)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePractical, durable ASA upgrades for modern trucks — engineered for OEM-friendly installation and real-world usability.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497868571007,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/9af1f393-il_fullxfull.7446741563_klt5.jpg?v=1765060798"},{"product_id":"ford-mustang-cup-holder-coin-tray-1987-1993-black","title":"Ford Mustang Cup Holder \u0026 Coin Tray 1987–1993  | black","description":"\u003cp\u003eFord Mustang Cup Holder \u0026amp; Coin Tray 1987–1993  | black\u003c\/p\u003e\n\u003cp\u003eThis custom cup holder and change tray replaces the factory ashtray in 1987–1993 Ford Mustang interiors.\u003cbr\u003eThe design is split into three sections — lower, center, and upper — allowing for precise printing and a stronger final assembly once glued together.\u003c\/p\u003e\n\u003cp\u003eAfter assembling the three parts with a small amount of super glue, the cup holder slides directly into the opening left by the ashtray, giving Foxbody owners a clean, functional OEM-style cup holder without buying an expensive LMR console.\u003c\/p\u003e\n\u003cp\u003eUsers have confirmed that this solves the classic issue of jamming water bottles between the seat and the e-brake.\u003cbr\u003eNow you finally have a real usable cup holder in a Foxbody.\u003c\/p\u003e\n\u003cp\u003eThe cup holder has been tested while driving with a full cup of water — it stayed securely in place.\u003cbr\u003eBecause the Foxbody center console is tight, large cups may sit close to the shifter.\u003cbr\u003eHowever, shifting is completely fine when the cup is removed, and smaller cups usually cause no interference.\u003c\/p\u003e\n\u003cp\u003ePrinted from UV-resistant ASA, this insert is durable, heat-stable, and ideal for older Mustangs that see hot interiors and sunlight.\u003c\/p\u003e\n\u003cp\u003e🧩 3-Piece Modular Construction\u003c\/p\u003e\n\u003cp\u003eIncluded files\/parts:\u003c\/p\u003e\n\u003cp\u003eLower Section — inserts and locks into the ashtray cavity\u003c\/p\u003e\n\u003cp\u003eCenter Section — connects the lower and upper parts\u003c\/p\u003e\n\u003cp\u003eUpper Section — main cup holder + coin tray\u003c\/p\u003e\n\u003cp\u003eAssembly:\u003c\/p\u003e\n\u003cp\u003eAlign all three sections.\u003c\/p\u003e\n\u003cp\u003eApply super glue to the mating surfaces.\u003c\/p\u003e\n\u003cp\u003eHold until cured.\u003c\/p\u003e\n\u003cp\u003eOptional: sand and paint to match the factory interior.\u003c\/p\u003e\n\u003cp\u003e⚙️ Features\u003c\/p\u003e\n\u003cp\u003eFits 1987–1993 Ford Mustang (Foxbody)\u003c\/p\u003e\n\u003cp\u003eReplaces factory ashtray\u003c\/p\u003e\n\u003cp\u003eThree-section design for precise printing and strong final assembly\u003c\/p\u003e\n\u003cp\u003eIncludes cup holder + coin tray\u003c\/p\u003e\n\u003cp\u003eTested with a full drink — secure in real driving\u003c\/p\u003e\n\u003cp\u003eSlight shifter interference only with large cups\u003c\/p\u003e\n\u003cp\u003eSmaller cups fit comfortably\u003c\/p\u003e\n\u003cp\u003eMuch cheaper alternative to expensive LMR consoles\u003c\/p\u003e\n\u003cp\u003eMade from ASA — UV- and heat-resistant\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e🎨 Finish\u003c\/p\u003e\n\u003cp\u003eMatte black ASA.\u003cbr\u003eCan be painted to match your interior for a factory-style look.\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003e👉 Comes unassembled (3 pieces) — must be glued together.\u003cbr\u003e👉 Smaller cups work best for manual transmission Mustangs.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003eLower section\u003c\/p\u003e\n\u003cp\u003eCenter section\u003c\/p\u003e\n\u003cp\u003eUpper section (cup holder + coin tray)\u003cbr\u003e(Unassembled)\u003c\/p\u003e\n\u003cp\u003eAffordable, functional upgrades for classic Mustangs — OEM-friendly and built to last.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497868603775,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/41c7de8e-il_fullxfull.7446668843_o98j.jpg?v=1765060701"},{"product_id":"toyota-pickup-cup-holder-fits-between-bench-seat-shifter-black","title":"Toyota Pickup Cup Holder | Fits Between Bench Seat \u0026 Shifter | black","description":"\u003cp\u003eCup Holder for 1990 Toyota Pickup (Bench Seat Model)\u003c\/p\u003e\n\u003cp\u003eThis custom cup holder is designed specifically for the 1990 Toyota Pickup (and similar years with a bench seat).\u003cbr\u003eIt fits securely in the narrow space between the bench seat and the shifter, adding a practical cupholder to a truck that never had one from the factory.\u003c\/p\u003e\n\u003cp\u003eThe design sits low and stable, keeping drinks accessible without interfering with shifting — even on manual models.\u003cbr\u003ePerfect for daily driving, long trips, or work trucks that need modern convenience.\u003c\/p\u003e\n\u003cp\u003ePrinted from automotive-grade ASA, the cup holder is UV-resistant, heat-resistant, and durable enough to handle the tough interior environment of older Toyota trucks.\u003c\/p\u003e\n\u003cp\u003e⚙️ Features\u003c\/p\u003e\n\u003cp\u003eDesigned for 1990 Toyota Pickup (fits bench seat interior)\u003c\/p\u003e\n\u003cp\u003eFits between the shifter and the bench seat\u003c\/p\u003e\n\u003cp\u003eStable, rattle-free placement\u003c\/p\u003e\n\u003cp\u003eNo drilling or modification required\u003c\/p\u003e\n\u003cp\u003eMade from UV-resistant ASA plastic\u003c\/p\u003e\n\u003cp\u003eHolds cups, bottles, and cans securely\u003c\/p\u003e\n\u003cp\u003e🎨 Finish\u003c\/p\u003e\n\u003cp\u003eMatte black ASA.\u003cbr\u003eCan remain unpainted or be finished to match your interior.\u003c\/p\u003e\n\u003cp\u003e⚠️ Note\u003cbr\u003e👉 Check that your truck has bench seats, as bucket-seat interiors differ.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1 × Toyota Pickup Cup Holder (ASA black)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497868636543,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/c7126a99-il_fullxfull.7397395494_e341.jpg?v=1765060665"},{"product_id":"chevy-silverado-cup-holder-gmc-sierra-2003-2007-center-console-upgrade-black","title":"Chevy Silverado Cup Holder GMC Sierra  | 2003–2007 Center Console Upgrade | black","description":"\u003cp\u003eChevy Silverado Cup Holder GMC Sierra  | 2003–2007 Center Console Upgrade |\u003c\/p\u003e\n\u003cp\u003eThis custom 4-cup holder insert replaces the factory 2-cup holder in the center console of 2003–2007 Chevy Silverado and GMC Sierra full-size trucks.\u003cbr\u003eIt drops into the factory location and greatly improves storage for drinks, bottles, and large travel cups.\u003c\/p\u003e\n\u003cp\u003eThe rear two cup holders are sized to fit 30 oz Yeti tumblers, while the front two cup holders are perfect for cans and 20 oz bottles.\u003c\/p\u003e\n\u003cp\u003eIf you work from your truck, travel a lot, or simply want more cup space — this is the most practical OEM-style upgrade.\u003c\/p\u003e\n\u003cp\u003eThe part is printed from automotive-grade ASA, which is UV-resistant, heat-stable, and far more durable than the aging factory plastic.\u003c\/p\u003e\n\u003cp\u003e⚙️ Fitment\u003c\/p\u003e\n\u003cp\u003eFits 2003–2007 Chevy Silverado \u0026amp; GMC Sierra (GMT800)\u003c\/p\u003e\n\u003cp\u003eAlso compatible with many 2003–2007 Suburban, Yukon, Tahoe, Avalanche\u003c\/p\u003e\n\u003cp\u003eDrops into the center console cup holder location\u003c\/p\u003e\n\u003cp\u003eReplaces the original 2-cup insert with a 4-cup layout\u003c\/p\u003e\n\u003cp\u003eRear cups fit 30oz Yeti tumblers\u003c\/p\u003e\n\u003cp\u003eFront cups fit 12oz cans, 20oz bottles, slim bottles\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eYou will need to trim a small amount of plastic on the factory center console for perfect fitment.\u003cbr\u003eThis modification is not visible once installed — the new cup holder fully covers the area.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e🧱 Features\u003c\/p\u003e\n\u003cp\u003e4-cup layout replaces OEM 2-cup holder\u003c\/p\u003e\n\u003cp\u003eTwo deep Yeti-compatible holders\u003c\/p\u003e\n\u003cp\u003eTwo smaller front holders for cans\/bottles\u003c\/p\u003e\n\u003cp\u003eOEM-style install\u003c\/p\u003e\n\u003cp\u003eASA construction — UV\/heat resistant (perfect for hot interiors)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e🎨 Finish\u003c\/p\u003e\n\u003cp\u003eMatte black ASA.\u003cbr\u003eLooks OEM and can be painted if desired.\u003c\/p\u003e\n\u003cp\u003e⚠️ Note\u003c\/p\u003e\n\u003cp\u003e👉 Sold individually — one 4-cup insert per order.\u003cbr\u003e👉 Small console trimming required but hidden after install.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1 × Silverado\/Sierra 4-Cup Holder Insert (ASA black)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497868931455,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/8146ba6f-il_fullxfull.7397200710_voej.jpg?v=1790887983"},{"product_id":"fiat-grande-punto-cup-holder-simple-drop-in-asa-cupholder-insert-black","title":"Fiat Grande Punto Cup Holder | Simple Drop-In ASA Cupholder Insert black","description":"\u003cp\u003eCup Holder for FIAT Grande Punto\u003c\/p\u003e\n\u003cp\u003eA clean and simple cup holder insert designed specifically for the Fiat Grande Punto interior.\u003cbr\u003eThis insert fits into the factory console area and provides a stable spot for drinks, bottles, or small items — an essential upgrade for cars that never came with practical cupholders.\u003c\/p\u003e\n\u003cp\u003ePrinted from automotive-grade ASA plastic, it is durable, UV-resistant, and heat-stable, making it ideal for everyday driving and hot interiors.\u003c\/p\u003e\n\u003cp\u003eThe design is minimal, functional, and blends well with the OEM interior styling of the Grande Punto.\u003c\/p\u003e\n\u003cp\u003e⚙️ Features\u003c\/p\u003e\n\u003cp\u003eFits Fiat Grande Punto\u003c\/p\u003e\n\u003cp\u003eSimple and practical drop-in design\u003c\/p\u003e\n\u003cp\u003eHolds cups, bottles, cans securely\u003c\/p\u003e\n\u003cp\u003eMade from UV-resistant ASA\u003c\/p\u003e\n\u003cp\u003eNo modifications or tools required\u003c\/p\u003e\n\u003cp\u003eLightweight but strong construction\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e🎨 Finish\u003c\/p\u003e\n\u003cp\u003eMatte black ASA.\u003cbr\u003eCan be used as-is or lightly sanded\/painted to match trim if desired.\u003c\/p\u003e\n\u003cp\u003e⚠️ Note\u003c\/p\u003e\n\u003cp\u003e👉 Sold individually — one cup holder per order.\u003c\/p\u003e\n\u003cp\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1 × Cup Holder Insert (ASA black)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497868865919,"sku":null,"price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/f4b5e280-il_fullxfull.7443629401_rcgw.jpg?v=1765060444"},{"product_id":"pontiac-fiero-ashtray-cup-holder-fits-both-sides-black","title":"Pontiac Fiero Ashtray Cup Holder | Fits Both Sides black","description":"\u003cp\u003eCup Holder for Pontiac Fiero — Ashtray Replacement\u003c\/p\u003e\n\u003cp\u003eA practical cup holder insert designed specifically for the Pontiac Fiero.\u003cbr\u003eIt fits directly into the factory ashtray cavity, turning unused space into a convenient spot for your drink.\u003c\/p\u003e\n\u003cp\u003eThe design is symmetrical, so it can be installed in either the left or right ashtray location.\u003cbr\u003eHowever, due to the steering wheel position, using it on the left side may be slightly uncomfortable while driving — the right side is recommended for everyday use.\u003c\/p\u003e\n\u003cp\u003ePrinted from automotive-grade ASA, this insert is heat- and UV-resistant, durable, and matches the factory-style look of the Fiero interior.\u003c\/p\u003e\n\u003cp\u003e⚙️ Features\u003c\/p\u003e\n\u003cp\u003eFits Pontiac Fiero (all years)\u003c\/p\u003e\n\u003cp\u003eDrops into the original ashtray cavity\u003c\/p\u003e\n\u003cp\u003eSymmetrical design — fits both sides\u003c\/p\u003e\n\u003cp\u003eRecommended use on right-hand side for comfort\u003c\/p\u003e\n\u003cp\u003eMade from UV- and heat-resistant ASA\u003c\/p\u003e\n\u003cp\u003eDesigned and 3D printed by CarCultureCyprus\u003c\/p\u003e\n\u003cp\u003e🎨 Finish\u003c\/p\u003e\n\u003cp\u003eDelivered in matte black ASA — ready to install as-is.\u003cbr\u003eCan be lightly sanded or painted to match your dash if desired.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e📦 Included\u003c\/p\u003e\n\u003cp\u003e1 × Ashtray cup holder (unpainted ASA black)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Black","offer_id":58588156658047,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":58588156690815,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/7c0899ee-il_fullxfull.7437623125_97m4.jpg?v=1764791122"},{"product_id":"nissan-350z-dual-cup-holder-center-console-replacement-black","title":"Nissan 350Z Dual Cup Holder | Center Console Replacement | black","description":"\u003cp\u003eNissan 350Z Dual Cup Holder | Center Console Replacement | 3-Piece ASA Set | OEM-Fit Drop-In Upgrade\u003c\/p\u003e\n\u003cp\u003eA custom 3-piece cup holder set designed specifically for the Nissan 350Z (2003–2009).\u003cbr\u003eThis upgrade replaces the factory console tray cover located behind the handbrake, converting it into a functional dual cup holder while maintaining a clean, OEM-style look.\u003c\/p\u003e\n\u003cp\u003eThe stock 350Z tray is shallow and not designed for cups — this replacement fits into the same space without any cutting or drilling, giving you two secure cup slots for daily use.\u003c\/p\u003e\n\u003cp\u003e⚙️ What’s Included\u003c\/p\u003e\n\u003cp\u003eYou will receive a 3-piece set:\u003c\/p\u003e\n\u003cp\u003eMain body – holds both cups or cans\u003c\/p\u003e\n\u003cp\u003eBottom liner – adds stability and prevents rattling\u003c\/p\u003e\n\u003cp\u003eTop cover liner – for a clean, finished edge\u003c\/p\u003e\n\u003cp\u003eYou can assemble it as you prefer — some owners install only the main body, while others use all parts for a more OEM finish.\u003cbr\u003eMinor fitting or sanding may be required depending on your console trim, as not all cars have identical tolerances.\u003c\/p\u003e\n\u003cp\u003e⚠️ Fitment Note\u003c\/p\u003e\n\u003cp\u003ePlease make sure your 350Z has the console tray behind the handbrake, as some trims and years differ slightly.\u003cbr\u003eThis product is a drop-in replacement for that section. If your model has a different layout, small adjustments may be necessary for a perfect fit.\u003c\/p\u003e\n\u003cp\u003e✅ Fits Nissan 350Z (2003–2009)\u003cbr\u003e✅ Replaces console tray behind the handbrake\u003cbr\u003e✅ Comes as a 3-piece kit — assemble to your preference\u003cbr\u003e✅ Plug-and-play — no cutting or drilling\u003cbr\u003e✅ ASA plastic – heat and UV resistant\u003cbr\u003e✅ OEM-style matte black finish\u003cbr\u003e✅ Fully reversible installation\u003c\/p\u003e\n\u003cp\u003e⚙️ Item Details\u003c\/p\u003e\n\u003cp\u003eFitment: Nissan 350Z (2003–2009)\u003c\/p\u003e\n\u003cp\u003eLocation: Center console tray (behind handbrake)\u003c\/p\u003e\n\u003cp\u003eIncludes: 3 pieces (main body, bottom liner, top liner)\u003c\/p\u003e\n\u003cp\u003eMaterial: ASA Plastic\u003c\/p\u003e\n\u003cp\u003eFinish: Matte black OEM texture\u003c\/p\u003e\n\u003cp\u003eInstallation: Drop-in, may require light fitting\u003c\/p\u003e\n\u003cp\u003e🧱 Materials\u003c\/p\u003e\n\u003cp\u003eASA Plastic, Heat Resistant Polymer\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497869652351,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/5cc99cdb-il_fullxfull.7388699918_7081.jpg?v=1765059828"},{"product_id":"suzuki-samurai-cup-holders-center-console-2-cups-storage-tray-black","title":"Suzuki Samurai Cup Holders Center Console – 2 Cups \u0026 Storage Tray black","description":"\u003cp\u003eSuzuki Samurai Cup Holders Center Console – 2 Cups \u0026amp; Storage Tray black\u003c\/p\u003e\n\u003cp\u003eCustom center console for Suzuki Samurai designed to fit perfectly around the handbrake. This console adds two deep cup holders and a practical storage tray — a must-have upgrade since the Samurai never came with factory cup holders.\u003c\/p\u003e\n\u003cp\u003e✔ Perfect fit – designed for the Suzuki Samurai handbrake tunnel\u003cbr\u003e✔ Two deep cup holders – hold cups, cans, or 0.5L bottles securely\u003cbr\u003e✔ Extra tray – rectangular storage for phone, keys, wallet, or small items\u003cbr\u003e✔ Made from ABS plastic – strong, heat resistant, easy to clean\u003cbr\u003e✔ Weight: 630 g – sturdy yet lightweight\u003cbr\u003e✔ Easy installation – simple drop-in fit, no drilling or cutting required\u003cbr\u003e✔ Ideal for daily driving, off-road, or overland builds\u003c\/p\u003e\n\u003cp\u003eUpgrade your Samurai interior with this functional and durable console that makes your cabin more practical and organized.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497872142719,"sku":null,"price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/il_fullxfull.7269427791_izw7.webp?v=1790884079"},{"product_id":"toyota-mr2-sw20-ashtray-cupholder-custom-fit-for-center-console-hidden-oem-style-drink-holder","title":"Toyota MR2 SW20 Ashtray Cupholder – Custom Fit for Center Console – Hidden OEM-Style Drink Holder","description":"\u003cp\u003eToyota MR2 SW20 Ashtray Cupholder\u003c\/p\u003e\n\u003cp\u003eThis isn’t just a cupholder — it’s the result of months of design, frustration, testing. Built specifically for the Toyota MR2 SW20, this ashtray replacement cupholder is a precision-fit insert that transforms the factory center console into a practical, OEM-style beverage slot.\u003c\/p\u003e\n\u003cp\u003eIf you love factory aesthetics but want modern convenience, this hidden cupholder is for you. Nothing would make me happier than seeing it installed at a cars \u0026amp; coffee event or track day.\u003c\/p\u003e\n\u003cp\u003eEnjoy a clean, stealthy solution without sacrificing the interior look you love.\u003c\/p\u003e\n\u003cp\u003eDesign Attribution:\u003cbr\u003eThis product is based on a design by Mitynerp, used with attribution under the terms of their original license.\u003c\/p\u003e\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\u003cp\u003eDesigned for Toyota MR2 SW20 – Fits perfectly in the OEM ashtray slot of the center console\u003cbr\u003eNo Permanent Modifications – Drop-in fit; completely reversible upgrade\u003cbr\u003eOEM+ Stealth Look – Hidden design preserves the MR2’s original interior styling\u003cbr\u003eFunctional Upgrade – Adds a usable cupholder where none existed\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497872175487,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/143bfc56-il_fullxfull.6985698409_ayvg.jpg?v=1764533204"},{"product_id":"porsche-911-cup-holder-ashtray-replacement-drink-black","title":"Porsche 911 Cup Holder | Ashtray Replacement Drink black","description":"\u003cp\u003ePorsche 911 Cup Holder | Ashtray Replacement Drink Holder\u003c\/p\u003e\n\u003cp\u003eCustom cup holder for Porsche 911 (996) — designed to replace the factory ashtray and provide a practical, OEM-looking solution for holding drinks securely in your interior.\u003c\/p\u003e\n\u003cp\u003eSimply remove the ashtray and insert this holder in its place — no modifications or drilling required.\u003cbr\u003eIt’s a direct-fit design that blends perfectly with the classic Porsche 996 center console layout.\u003c\/p\u003e\n\u003cp\u003e✅ Fits Porsche 911 (996, 1998–2004)\u003cbr\u003e✅ Replaces the original ashtray\u003cbr\u003e✅ Adds a stable and convenient cup holder\u003cbr\u003e✅ 3D printed with heat-resistant ASA \/ ABS plastic\u003cbr\u003e✅ OEM-style matte black finish\u003cbr\u003e✅ Easy drop-in installation — no tools needed\u003c\/p\u003e\n\u003cp\u003ePerfect for daily drivers or weekend cars, combining Porsche’s clean design with everyday practicality.\u003c\/p\u003e\n\u003cp\u003e⚙️ Item Details\u003c\/p\u003e\n\u003cp\u003eFitment: Porsche 911 (996, 1998–2004)\u003c\/p\u003e\n\u003cp\u003ePosition: Center console – ashtray location\u003c\/p\u003e\n\u003cp\u003eFunction: Drink \/ cup holder insert\u003c\/p\u003e\n\u003cp\u003eMaterial: ASA \/ ABS\u003c\/p\u003e\n\u003cp\u003eFinish: Matte black OEM look\u003c\/p\u003e\n\u003cp\u003eInstall: Drop-in fit, no modification\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56497871978879,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/7297154f-il_fullxfull.7334102726_plqr.jpg?v=1765056601"},{"product_id":"bmw-e30-center-console-cup-holder","title":"BMW E30 Center Console Cup Holder","description":"\u003cp\u003eBMW E30 Center Console Cup Holder\u003c\/p\u003e\n\u003cp\u003eFor vehicles WITHOUT original cassette holder\u003c\/p\u003e\n\u003cp\u003eThis cup holder is designed for the BMW E30 center console compartment and offers a clean, discreet solution without bulky aftermarket add-ons.\u003c\/p\u003e\n\u003cp\u003eIt is intended only for E30 models without the factory cassette holder.\u003c\/p\u003e\n\u003cp\u003eFitment\u003c\/p\u003e\n\u003cp\u003e✔ BMW E30\u003cbr\u003e✔ Center console compartment\u003cbr\u003e✖ Not compatible with vehicles equipped with the original cassette holder\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eMinimal OEM-style design\u003c\/p\u003e\n\u003cp\u003eFits directly into the center console compartment\u003c\/p\u003e\n\u003cp\u003eHolds cans and standard drink cups securely\u003c\/p\u003e\n\u003cp\u003eNo cutting or permanent modification required\u003c\/p\u003e\n\u003cp\u003eDesigned to preserve the original interior look\u003c\/p\u003e\n\u003cp\u003eManufacturing \u0026amp; Finish\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed automotive part.\u003cbr\u003eDue to the manufacturing process, minor surface marks, layer lines, and small visual imperfections are normal and do not affect fit or functionality.\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003eColor and surface texture may vary slightly\u003c\/p\u003e\n\u003cp\u003eTest fit before regular use\u003c\/p\u003e\n\u003cp\u003eWhat’s Included\u003c\/p\u003e\n\u003cp\u003e1x BMW E30 center console cup holder\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56564999094655,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/e30.2_f43c4818-927e-4490-bd59-bdea1d53ef0f.png?v=1765704223"},{"product_id":"citroen-c15-visa-ashtray-cup-holder-clip-on-can-holder-66mm-dashboard-mount","title":"Citroën C15 \/ Visa Ashtray Cup Holder – Clip-On Can Holder 66mm Dashboard Mount","description":"\u003cp\u003eCitroën C15 \/ Visa Ashtray Cup Holder – Clip-On Can Holder 66mm Dashboard Mount\u003c\/p\u003e\n\u003cp\u003eThis clip-on cup holder is designed to mount directly onto the original ashtray of the Citroën C15 or Citroën Visa, providing a simple and secure solution for holding drink cans.\u003c\/p\u003e\n\u003cp\u003eIt is specifically sized for standard 66 mm beverage cans and offers a stable hold even while driving on uneven roads.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the cup holder locks in place and requires a rotating motion to remove, preventing it from popping out due to vibrations or bumps.\u003c\/p\u003e\n\u003cp\u003e🚗 Vehicle Compatibility\u003c\/p\u003e\n\u003cp\u003e✔ Citroën C15\u003cbr\u003e✔ Citroën Visa\u003cbr\u003e✔ Mounts onto the factory ashtray\u003c\/p\u003e\n\u003cp\u003e⚠️ Please ensure your vehicle is equipped with the original ashtray before purchase.\u003c\/p\u003e\n\u003cp\u003e🥤 Cup Compatibility\u003c\/p\u003e\n\u003cp\u003eDesigned for standard 66 mm cans\u003c\/p\u003e\n\u003cp\u003eIdeal for soda and energy drink cans\u003c\/p\u003e\n\u003cp\u003eNot intended for bottles or oversized cups\u003c\/p\u003e\n\u003cp\u003e🧩 Key Features\u003c\/p\u003e\n\u003cp\u003eClips securely onto the ashtray\u003c\/p\u003e\n\u003cp\u003eRequires rotation to remove once installed\u003c\/p\u003e\n\u003cp\u003eStable design prevents accidental release\u003c\/p\u003e\n\u003cp\u003eCompact and functional dashboard-mounted solution\u003c\/p\u003e\n\u003cp\u003eKeeps drinks accessible without blocking controls\u003c\/p\u003e\n\u003cp\u003e🛠 Installation\u003c\/p\u003e\n\u003cp\u003eAlign the holder with the ashtray\u003c\/p\u003e\n\u003cp\u003ePress into place until fully seated\u003c\/p\u003e\n\u003cp\u003eTo remove, rotate and pull\u003c\/p\u003e\n\u003cp\u003eNo tools or permanent modifications required.\u003c\/p\u003e\n\u003cp\u003e🧱 Material \u0026amp; Manufacturing\u003c\/p\u003e\n\u003cp\u003eThis cup holder is professionally 3D printed from ASA plastic, selected for automotive interior use.\u003c\/p\u003e\n\u003cp\u003eASA provides:\u003c\/p\u003e\n\u003cp\u003eGood heat resistance\u003c\/p\u003e\n\u003cp\u003eImproved durability over brittle OEM plastics\u003c\/p\u003e\n\u003cp\u003eLong-term stability for daily use inside the vehicle\u003c\/p\u003e\n\u003cp\u003eDue to the nature of 3D printing, minor layer lines or cosmetic marks may be visible.\u003cbr\u003eThese do not affect fitment or functionality.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003c\/p\u003e\n\u003cp\u003e✔ 1 × Ashtray-mounted cup holder\u003cbr\u003e✖ Vehicle, ashtray, and beverage not included\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer\u003c\/p\u003e\n\u003cp\u003eAftermarket accessory, not affiliated with Citroën\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for ashtray mounting\u003c\/p\u003e\n\u003cp\u003eFitment depends on original ashtray condition\u003c\/p\u003e\n\u003cp\u003eNot suitable for heavy bottles or large cups\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56595894206847,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/citr5.png?v=1766101963"},{"product_id":"tesla-model-3-model-y-large-cup-holder-insert-for-mason-jar-yeti-bottle","title":"Tesla Model 3 \/ Model Y Large Cup Holder Insert for Mason Jar \u0026 YETI Bottle","description":"\u003cp\u003eTesla Model 3 \/ Model Y Large Cup Holder Insert for Mason Jar \u0026amp; YETI Bottle – Dual Cup Adapter\u003c\/p\u003e\n\u003cp\u003eThis oversized cup holder insert is designed for Tesla Model 3 and Model Y to securely hold large drink containers that do not fit in the factory cup holders.\u003c\/p\u003e\n\u003cp\u003ePerfect for:\u003c\/p\u003e\n\u003cp\u003e32oz wide-mouth Mason jars\u003c\/p\u003e\n\u003cp\u003e32oz YETI water bottles\u003c\/p\u003e\n\u003cp\u003eOptional fit for 24oz YETI bottles (Included in set)\u003c\/p\u003e\n\u003cp\u003eThe insert fits snugly into the original Tesla center console cup holder and stays firmly in place during driving, even with heavy or tall bottles.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cp\u003e✔ Designed specifically for Tesla cup holder dimensions\u003cbr\u003e✔ Holds large diameter bottles securely\u003cbr\u003e✔ Dual-cup layout for daily use\u003cbr\u003e✔ Integrated slot for Tesla key card\u003cbr\u003e✔ Stable fit – no wobbling or tipping\u003cbr\u003e✔ Clean OEM-style design\u003c\/p\u003e\n\u003cp\u003eCompatibility\u003c\/p\u003e\n\u003cp\u003eTesla Model 3\u003c\/p\u003e\n\u003cp\u003eTesla Model Y\u003cbr\u003e(up to recent model years – please compare with photos if unsure)\u003c\/p\u003e\n\u003cp\u003eMaterial \u0026amp; Quality\u003c\/p\u003e\n\u003cp\u003eManufactured in ASA (automotive-grade plastic)\u003c\/p\u003e\n\u003cp\u003eHeat-resistant and suitable for hot car interiors\u003c\/p\u003e\n\u003cp\u003eDesigned for long-term daily use\u003c\/p\u003e\n\u003cp\u003eWhat’s Included\u003c\/p\u003e\n\u003cp\u003e1× dual cup holder insert\u003c\/p\u003e\n\u003cp\u003eReady to install – no tools required\u003c\/p\u003e\n\u003cp\u003e⚠️ Bottles, cups, and key card shown in photos are not included\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003eDesigned for large containers that exceed standard cup holder size\u003c\/p\u003e\n\u003cp\u003eFit is intentionally snug for stability\u003c\/p\u003e\n\u003cp\u003eMinor surface texture typical for durable automotive parts\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56596112540031,"sku":null,"price":120.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/tes2.png?v=1766111375"},{"product_id":"fiat-ducato-camper-can-holder-and-phone-tablet-holder-dashboard-mount-set-2-sizes","title":"Fiat Ducato Camper Can Holder and Phone Tablet Holder Dashboard Mount Set 2 Sizes","description":"\u003cp\u003eFiat Ducato Camper Can Holder and Phone Tablet Holder Dashboard Mount Set 2 Sizes\u003c\/p\u003e\n\u003cp\u003eThis is a dashboard-mounted can holder and mobile phone \/ tablet holder set designed specifically for Fiat Ducato Camper interiors\u003c\/p\u003e\n\u003cp\u003ePerfect solution for campers and motorhomes, allowing secure placement of drinks, smartphones and tablets directly on the dashboard\u003c\/p\u003e\n\u003cp\u003eDesigned with precise geometry and slight holding angle to keep items stable during driving\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eDashboard-mounted cup and device holder\u003cbr\u003eDesigned for Fiat Ducato Camper dashboards\u003cbr\u003eSecure grip for cans, bottles, phones and tablets\u003cbr\u003eSlight angled design for better stability\u003cbr\u003eClean OEM-style appearance\u003cbr\u003e3D printed for accurate fitment\u003c\/p\u003e\n\u003cp\u003eSET DETAILS\u003c\/p\u003e\n\u003cp\u003eSet of 2 holders\u003cbr\u003eTwo size options available\u003c\/p\u003e\n\u003cp\u003eSmall size\u003cbr\u003e• Inner diameter approx 58.4 mm\u003cbr\u003e• Ideal for standard cans and most smartphones\u003c\/p\u003e\n\u003cp\u003eLarge size\u003cbr\u003e• Inner diameter approx 68.2 mm\u003cbr\u003e• Suitable for larger bottles and tablets\u003c\/p\u003e\n\u003cp\u003ePlease select the required size option when ordering\u003c\/p\u003e\n\u003cp\u003eCOMPATIBILITY\u003c\/p\u003e\n\u003cp\u003eVehicle\u003cbr\u003eFiat Ducato\u003cbr\u003eFiat Ducato Camper\u003cbr\u003eCamper and motorhome conversions based on Fiat Ducato\u003c\/p\u003e\n\u003cp\u003eINSTALLATION\u003c\/p\u003e\n\u003cp\u003eDesigned to mount directly on the dashboard\u003cbr\u003eNo drilling or permanent modification required\u003cbr\u003eEasy to install and remove\u003c\/p\u003e\n\u003cp\u003eWHAT IS INCLUDED\u003c\/p\u003e\n\u003cp\u003e2 dashboard holders\u003cbr\u003eSet of two pieces\u003c\/p\u003e\n\u003cp\u003eDrinks, phones, tablets and accessories shown in photos are not included\u003c\/p\u003e\n\u003cp\u003eIMPORTANT NOTES\u003c\/p\u003e\n\u003cp\u003eDesigned for camper and motorhome dashboards only\u003cbr\u003eCheck available dashboard space before purchase\u003cbr\u003eNot compatible with other vehicle dashboards\u003c\/p\u003e\n\u003cp\u003eMATERIAL DISCLAIMER\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed automotive interior part\u003cbr\u003eMinor surface texture and layer lines are normal\u003cbr\u003eDesigned for functional camper and automotive use\u003cbr\u003eNot an OEM part\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Small 58mm","offer_id":56603268809087,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true},{"title":"Large 68mm","offer_id":56603268841855,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/duc1.png?v=1766190902"},{"product_id":"mazda-mx-5-miata-nb-armrest-cup-holder-insert-center-console-double-drink-holder","title":"Mazda MX-5 Miata NB Armrest Cup Holder Insert – Center Console Double Drink Holder","description":"\u003cp\u003eMazda MX-5 Miata NB Armrest Cup Holder Insert – Center Console Double Drink Holder\u003c\/p\u003e\n\u003cp\u003eAdd practical cup holders to your Mazda MX-5 Miata NB with this armrest-mounted double drink holder insert.\u003c\/p\u003e\n\u003cp\u003eThis part installs into the factory center armrest area and provides two stable cup positions without drilling or permanent modification.\u003c\/p\u003e\n\u003cp\u003eThe holder is 3D printed in automotive-grade ASA plastic. As with all 3D printed parts, minor layer lines or small surface artifacts may be visible. The holder is fully functional as supplied, however painting is recommended if you want a perfectly smooth OEM-style finish.\u003c\/p\u003e\n\u003cp\u003e🔹 Key Features\u003c\/p\u003e\n\u003cp\u003e✔ Fits Mazda MX-5 Miata NB (1998–2005)\u003cbr\u003e✔ Provides two cup holders\u003cbr\u003e✔ Installs into factory armrest area\u003cbr\u003e✔ No cutting or permanent modification\u003cbr\u003e✔ Heat-resistant ASA material\u003cbr\u003e✔ 3D printed – minor print artifacts possible\u003cbr\u003e✔ Paintable for perfect cosmetic finish\u003c\/p\u003e\n\u003cp\u003e🔹 Installation\u003c\/p\u003e\n\u003cp\u003eRemove the factory armrest insert.\u003c\/p\u003e\n\u003cp\u003eSlide the cup holder into position.\u003c\/p\u003e\n\u003cp\u003eFor tighter fit, add a small strip of double-sided tape or hook-and-loop tape.\u003c\/p\u003e\n\u003cp\u003e⏱ Install time: under 5 minutes.\u003c\/p\u003e\n\u003cp\u003e🔹 Compatibility\u003c\/p\u003e\n\u003cp\u003e• Mazda MX-5 \/ Miata NB (1998–2005)\u003cbr\u003e• Center armrest console\u003cbr\u003e• Fits most standard drink bottles and cups\u003c\/p\u003e\n\u003cp\u003e🔹 FAQ\u003c\/p\u003e\n\u003cp\u003eQ: Is this an OEM part?\u003cbr\u003eA: No — this is a 3D printed ASA part. Minor print artifacts are normal.\u003c\/p\u003e\n\u003cp\u003eQ: Can it be painted?\u003cbr\u003eA: Yes — painting is recommended for best appearance.\u003c\/p\u003e\n\u003cp\u003eQ: Will it fit tall bottles?\u003cbr\u003eA: Yes — the lower cut-outs allow clearance for taller containers.\u003c\/p\u003e\n\u003cp\u003e🔹 Processing \u0026amp; Shipping\u003c\/p\u003e\n\u003cp\u003e• Made to order in 1–3 business days\u003cbr\u003e• Ships worldwide\u003cbr\u003e• Securely packaged\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56628308509055,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/nb6.png?v=1766598755"},{"product_id":"nissan-240sx-s13-s14-ashtray-cup-holder-insert-center-console-drink-holder","title":"Nissan 240SX S13 S14 Ashtray Cup Holder Insert – Center Console Drink Holder","description":"\u003cp\u003eNissan 240SX S13 S14 Ashtray Cup Holder Insert – Center Console Drink Holder\u003c\/p\u003e\n\u003cp\u003eAdd a functional cup holder to your Nissan 240SX S13 \/ S14 by replacing the factory ashtray insert with this custom drink holder.\u003c\/p\u003e\n\u003cp\u003eThis part is designed to sit inside the original ashtray opening in the center console.\u003c\/p\u003e\n\u003cp\u003eThe holder is 3D printed in automotive-grade ASA plastic. Because this is a 3D printed part, minor layer lines or surface artifacts may be visible. The cup holder is fully usable as supplied, however painting is recommended if you want a perfectly smooth OEM-style finish.\u003c\/p\u003e\n\u003cp\u003e⚠ Due to factory tolerances and age of interior plastics, fitment may vary. In some vehicles a small amount of sanding or thin double-sided tape may be required for a snug fit.\u003c\/p\u003e\n\u003cp\u003e🔹 Key Features\u003c\/p\u003e\n\u003cp\u003e✔ Fits Nissan 240SX S13 \u0026amp; S14\u003cbr\u003e✔ Replaces factory ashtray insert\u003cbr\u003e✔ Adds functional cup holder to center console\u003cbr\u003e✔ Heat-resistant ASA plastic\u003cbr\u003e✔ 3D printed – minor print artifacts possible\u003cbr\u003e✔ Paintable for perfect cosmetic finish\u003c\/p\u003e\n\u003cp\u003e🔹 Installation\u003c\/p\u003e\n\u003cp\u003eRemove the original ashtray insert.\u003c\/p\u003e\n\u003cp\u003eTest fit the cup holder.\u003c\/p\u003e\n\u003cp\u003eIf required, add thin double-sided tape or lightly sand edges for perfect fit.\u003c\/p\u003e\n\u003cp\u003ePress the holder into place.\u003c\/p\u003e\n\u003cp\u003e⏱ Install time: under 5 minutes.\u003c\/p\u003e\n\u003cp\u003e🔹 Compatibility\u003c\/p\u003e\n\u003cp\u003e• Nissan 240SX S13 \/ S14\u003cbr\u003e• Factory ashtray opening only\u003cbr\u003e• Console trimming not required (minor adjustment may be needed)\u003c\/p\u003e\n\u003cp\u003e🔹 FAQ\u003c\/p\u003e\n\u003cp\u003eQ: Does this drop in without modification?\u003cbr\u003eA: On most cars yes, however due to age and interior variations some vehicles may require light sanding or thin tape for a tight fit.\u003c\/p\u003e\n\u003cp\u003eQ: Is this OEM plastic?\u003cbr\u003eA: No — this is a 3D printed ASA part. Minor surface artifacts are normal.\u003c\/p\u003e\n\u003cp\u003e🔹 Processing \u0026amp; Shipping\u003c\/p\u003e\n\u003cp\u003e• Made to order in 1–3 business days\u003cbr\u003e• Ships worldwide\u003cbr\u003e• Securely packaged\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56628500365695,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/sx1.png?v=1766607468"},{"product_id":"renault-clio-mk1-center-console-dual-cup-holder-1991-1998-dashboard-mount","title":"Renault Clio MK1 Center Console Dual Cup Holder – 1991–1998 – Dashboard Mount","description":"\u003cp\u003eRenault Clio MK1 Center Console Dual Cup Holder – 1991–1998 – Dashboard Mount\u003c\/p\u003e\n\u003cp\u003eAdd practical drink storage to your Renault Clio MK1 with this custom dual cup holder designed specifically for the factory dashboard layout.\u003c\/p\u003e\n\u003cp\u003eEach unit is produced in high-temperature ASA plastic suitable for automotive interiors. As with all 3D printed parts, minor surface marks may be visible. For a perfect factory look, light sanding and painting is recommended.\u003c\/p\u003e\n\u003cp\u003e🔹 Features\u003c\/p\u003e\n\u003cp\u003e✔ Fits Renault Clio MK1 (1991–1998)\u003cbr\u003e✔ Dual cup holder design\u003cbr\u003e✔ Laser scanned from original interior part\u003cbr\u003e✔ Designed for center dashboard mounting\u003cbr\u003e✔ High-temperature ASA plastic\u003cbr\u003e✔ Rigid structure – no flexing\u003cbr\u003e✔ Paintable for perfect OEM appearance\u003c\/p\u003e\n\u003cp\u003e🔹 Installation\u003c\/p\u003e\n\u003cp\u003ePosition the cup holder under the dashboard panel.\u003cbr\u003eFix it in place using the rear screw mount (as shown in photos).\u003cbr\u003eTighten until secure.\u003c\/p\u003e\n\u003cp\u003e⏱ Installation time: under 5 minutes.\u003c\/p\u003e\n\u003cp\u003e🔹 Compatibility\u003c\/p\u003e\n\u003cp\u003e• Renault Clio MK1 (1991–1998)\u003cbr\u003e• Fits factory dashboard layout only\u003c\/p\u003e\n\u003cp\u003e🔹 Processing \u0026amp; Shipping\u003c\/p\u003e\n\u003cp\u003e• Made to order within 1–3 business days\u003cbr\u003e• Ships worldwide\u003cbr\u003e• Securely packed to prevent damage\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56635618034047,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/cli4.png?v=1766794511"},{"product_id":"alfa-romeo-147-mk1-mk2-cup-holder-insert-center-console-drink-holder","title":"Alfa Romeo 147 MK1–MK2 Cup Holder Insert – Center Console Drink Holder","description":"\u003cp\u003eAlfa Romeo 147 MK1–MK2 Cup Holder Insert – Center Console Drink Holder – With Support \/ No Support Options\u003c\/p\u003e\n\u003cp\u003eRestore lost practicality in your Alfa Romeo 147 with this precision-fit center console cup holder insert.\u003c\/p\u003e\n\u003cp\u003eThis part was digitally modeled to match the original console geometry and provides a clean, factory-style solution for adding cup holders where the OEM design lacked functionality.\u003c\/p\u003e\n\u003cp\u003eEach piece is produced in high-temperature ASA plastic, suitable for interior automotive use and resistant to heat deformation.\u003cbr\u003eAs with all 3D printed parts, minor surface marks may be visible. For a perfect OEM appearance, light sanding and painting is recommended.\u003c\/p\u003e\n\u003cp\u003e🔹 Available Options\u003c\/p\u003e\n\u003cp\u003eChoose the required version from the variation menu:\u003c\/p\u003e\n\u003cp\u003e• Version with rear support legs (maximum rigidity)\u003cbr\u003e• Version without support legs (faster install, cleaner look)\u003c\/p\u003e\n\u003cp\u003e🔹 Features\u003c\/p\u003e\n\u003cp\u003e✔ Fits Alfa Romeo 147 MK1 \u0026amp; MK2\u003cbr\u003e✔ Designed for center console installation\u003cbr\u003e✔ Two cup positions\u003cbr\u003e✔ High-temperature ASA plastic\u003cbr\u003e✔ Heat-resistant interior material\u003cbr\u003e✔ Paintable for OEM-like finish\u003cbr\u003e✔ Secure mounting geometry\u003c\/p\u003e\n\u003cp\u003e🔹 Installation\u003c\/p\u003e\n\u003cp\u003ePosition the cup holder in the console opening.\u003c\/p\u003e\n\u003cp\u003eAlign with the mounting area.\u003c\/p\u003e\n\u003cp\u003eSecure using the factory mounting point or a small screw.\u003c\/p\u003e\n\u003cp\u003e⏱ Installation time: under 5 minutes.\u003c\/p\u003e\n\u003cp\u003e🔹 Compatibility\u003c\/p\u003e\n\u003cp\u003e• Alfa Romeo 147 MK1\u003cbr\u003e• Alfa Romeo 147 MK2\u003cbr\u003e• Center console location only\u003c\/p\u003e\n\u003cp\u003e🔹 Processing \u0026amp; Shipping\u003c\/p\u003e\n\u003cp\u003e• Made to order within 1–3 business days\u003cbr\u003e• Ships worldwide\u003cbr\u003e• Securely packed to prevent damage\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Yes","offer_id":56635698741631,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true},{"title":"No","offer_id":56635698774399,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/alfa3.png?v=1766797815"},{"product_id":"toyota-mr2-aw11-cup-holder-phone-slot-left-or-right-side-ashtray-replacement","title":"Toyota MR2 AW11 Cup Holder + Phone slot – Left or Right Side Ashtray Replacement","description":"\u003cp\u003eToyota MR2 AW11 Cup Holder + Phone slot – Left or Right Side Ashtray Replacement (1984–1989)\u003c\/p\u003e\n\u003cp\u003eThis upgraded design not only holds your drink securely, but also features a built-in side slot for your smartphone, allowing you to keep your phone within easy reach while driving.\u003c\/p\u003e\n\u003cp\u003eThe part is 3D printed in ASA plastic, providing excellent heat resistance and long-term durability in hot vehicle interiors.\u003c\/p\u003e\n\u003cp\u003eAvailable in Left Side or Right Side version depending on your interior layout.\u003c\/p\u003e\n\u003cp\u003e🔹 Key Features\u003c\/p\u003e\n\u003cp\u003eDesigned for Toyota MR2 AW11 (1984–1989)\u003c\/p\u003e\n\u003cp\u003eReplaces the original ashtray with a cup holder + phone slot combo\u003c\/p\u003e\n\u003cp\u003eIntegrated phone holder slot for navigation or charging access\u003c\/p\u003e\n\u003cp\u003eAvailable in Left Side or Right Side version\u003c\/p\u003e\n\u003cp\u003ePrinted from ASA plastic – heat resistant, automotive-grade material\u003c\/p\u003e\n\u003cp\u003eInternal cross insert stabilizes bottles and cups\u003c\/p\u003e\n\u003cp\u003eOEM-style fitment without permanent modifications\u003c\/p\u003e\n\u003cp\u003e📦 What you receive\u003c\/p\u003e\n\u003cp\u003e1× Cup holder with built-in phone slot (Left or Right – select in options)\u003c\/p\u003e\n\u003cp\u003eInternal drink stabilizer insert included\u003c\/p\u003e\n\u003cp\u003e⚠ Important Notes\u003c\/p\u003e\n\u003cp\u003eThis item is 3D printed and may have minor surface artifacts.\u003c\/p\u003e\n\u003cp\u003eFor a perfect finish, painting is recommended.\u003c\/p\u003e\n\u003cp\u003eAftermarket part – not affiliated with Toyota.\u003c\/p\u003e\n\u003cp\u003e🛠 Installation\u003c\/p\u003e\n\u003cp\u003eRemove the factory ashtray and slide the cup holder into place.\u003cbr\u003eNo drilling or permanent modifications required.\u003c\/p\u003e\n\u003cp\u003e📏 Fitment\u003c\/p\u003e\n\u003cp\u003eVehicle: Toyota MR2 AW11\u003cbr\u003eYears: 1984–1989\u003cbr\u003ePosition: Left side or Right side (select variation)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Left","offer_id":56639314329983,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true},{"title":"Right","offer_id":56639314362751,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/mr2.8.png?v=1766975855"},{"product_id":"citroen-bx-center-console-twin-cup-holder-with-phone-slot","title":"Citroën BX Center Console Twin Cup Holder with Phone Slot","description":"\u003cp\u003eCitroën BX Center Console Twin Cup Holder with Phone Slot\u003c\/p\u003e\n\u003cp\u003eUpgrade your Citroën BX interior with this custom twin cup holder with integrated phone slot, designed to clip directly into the original blank switch positions in the center console.\u003c\/p\u003e\n\u003cp\u003eThis insert replaces the unused switch blanks and turns that wasted space into a practical storage solution for daily driving.\u003c\/p\u003e\n\u003cp\u003e🔧 Key features\u003c\/p\u003e\n\u003cp\u003eHolds two drinks at the same time – coffee cups, 600ml bottles or standard drink cans\u003c\/p\u003e\n\u003cp\u003eBuilt-in phone slot for your smartphone or small items\u003c\/p\u003e\n\u003cp\u003eClips into the original blank switch slots – no permanent modification to the car\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Citroën BX center console layout\u003c\/p\u003e\n\u003cp\u003eCompact shape that does not interfere with handbrake or window switches\u003c\/p\u003e\n\u003cp\u003e🧩 Two-part construction – adjustable fit\u003c\/p\u003e\n\u003cp\u003eThis product is supplied in 2 separate parts:\u003c\/p\u003e\n\u003cp\u003eMain cup holder body\u003c\/p\u003e\n\u003cp\u003eTwo small mounting blocks\u003c\/p\u003e\n\u003cp\u003eThe blocks must be glued or screwed to the main body after you receive the part.\u003cbr\u003eThis allows you to adjust the exact position of the mounting blocks so the holder fits perfectly in your car, even if your console tolerances differ slightly.\u003c\/p\u003e\n\u003cp\u003e🖨️ Manufacturing notes\u003c\/p\u003e\n\u003cp\u003eThe item is 3D printed, therefore minor surface marks or layer lines may be visible\u003c\/p\u003e\n\u003cp\u003eOptional painting or light sanding is recommended for a perfect OEM look\u003c\/p\u003e\n\u003cp\u003eMade from ASA plastic for improved heat resistance and durability in hot interiors\u003c\/p\u003e\n\u003cp\u003e⚠️ Important\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket custom accessory, not an OEM Citroën part\u003c\/p\u003e\n\u003cp\u003eTest-fit before final fixing of the mounting blocks\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic DIY skills (glue or small screws – not included)\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56639368364415,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/bx2.png?v=1766977572"},{"product_id":"peugeot-boxer-fiat-ducato-citroen-relay-dash-side-panel-cup-holder-2006-2023","title":"Peugeot Boxer \/ Fiat Ducato \/ Citroën Relay Dash Side Panel Cup Holder (2006–2023)","description":"\u003cp\u003ePeugeot Boxer \/ Fiat Ducato \/ Citroën Relay Dash Side Panel Cup Holder (2006–2023) – Solid or Hexagon, Short or Long, Single or Pair\u003c\/p\u003e\n\u003cp\u003eThis custom dash side panel cup holder is designed for:\u003c\/p\u003e\n\u003cp\u003ePeugeot Boxer \/ Fiat Ducato \/ Citroën Relay (2006–2023)\u003c\/p\u003e\n\u003cp\u003eIt mounts to the front dashboard side trim (A-pillar side panel area) using screws — exactly as shown in real customer photos.\u003cbr\u003eKeeps your drink secure and always within reach without taking up center console space.\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed aftermarket accessory made from ASA plastic — UV-stable, heat-resistant and perfectly suited for automotive interiors.\u003c\/p\u003e\n\u003cp\u003eAs with all 3D printed parts, minor surface marks or layer lines may be visible.\u003cbr\u003eOptional painting is recommended for a factory-like finish.\u003c\/p\u003e\n\u003cp\u003e🔧 Available Variations\u003c\/p\u003e\n\u003cp\u003eChoose the exact configuration you need:\u003c\/p\u003e\n\u003cp\u003eQuantity\u003cbr\u003e• Single (Left or Right)\u003cbr\u003e• Pair (Left + Right)\u003c\/p\u003e\n\u003cp\u003eSide\u003cbr\u003e• Left side\u003cbr\u003e• Right side\u003c\/p\u003e\n\u003cp\u003eStyle\u003cbr\u003e• Hexagon – lightweight honeycomb design\u003cbr\u003e• Solid – smooth closed design (Short version only)\u003c\/p\u003e\n\u003cp\u003eLength\u003cbr\u003e• Short\u003cbr\u003e• Long (Hexagon only)\u003c\/p\u003e\n\u003cp\u003e📏 Dimensions\u003cbr\u003eVersion    Width × Length × Height\u003cbr\u003eShort    approx. 90 × 216 × 75 mm\u003cbr\u003eLong    approx. 90 × 231 × 75 mm\u003c\/p\u003e\n\u003cp\u003e(Solid version uses Short size.)\u003c\/p\u003e\n\u003cp\u003eCup opening fits standard drink cups and bottles up to approx. 75 mm diameter.\u003c\/p\u003e\n\u003cp\u003e🔩 Installation\u003c\/p\u003e\n\u003cp\u003eThe holder is designed to be screw-mounted to the dashboard side trim \/ A-pillar side panel (driver or passenger side).\u003c\/p\u003e\n\u003cp\u003e• Uses self-tapping screws (not included)\u003cbr\u003e• Drilling is required — this is not a clip-on product\u003cbr\u003e• Pre-drilling small pilot holes is strongly recommended for a clean installation\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e• Finished 3D printed cup holder\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003e• This is an aftermarket 3D printed part, not OEM\u003cbr\u003e• Minor print artifacts may be present\u003cbr\u003e• Painting is optional but recommended for perfect appearance\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Left \/ Hexagon Short","offer_id":56639399231871,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"Left \/ Hexagon Long","offer_id":56639399264639,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"Left \/ Solid (Short Only)","offer_id":56639399297407,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"Right \/ Hexagon Short","offer_id":56639399330175,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"Right \/ Hexagon Long","offer_id":56639399362943,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"Right \/ Solid (Short Only)","offer_id":56639399395711,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true},{"title":"Left + Right \/ Hexagon Short","offer_id":56639399428479,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true},{"title":"Left + Right \/ Hexagon Long","offer_id":56639399461247,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true},{"title":"Left + Right \/ Solid (Short Only)","offer_id":56639399494015,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/cup5.png?v=1766981203"},{"product_id":"skoda-octavia-1-center-console-dual-cup-holder-fits-2-500ml-cans","title":"Skoda Octavia 1 Center Console Dual Cup Holder – Fits 2 × 500ml Cans","description":"\u003cp\u003eSkoda Octavia 1 Center Console Dual Cup Holder – Fits 2 × 500ml Cans\u003c\/p\u003e\n\u003cp\u003eThis custom dual cup holder is designed specifically for the Skoda Octavia 1 center console area and holds two standard 500ml cans securely.\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed aftermarket accessory made in ASA plastic, suitable for automotive interiors. ASA is UV-stable and heat-resistant, making it ideal for daily driving.\u003c\/p\u003e\n\u003cp\u003eAs with all 3D printed products, minor layer lines or small surface imperfections may be visible. For customers who want a perfect factory-like finish, optional painting is recommended.\u003c\/p\u003e\n\u003cp\u003e🔧 Installation\u003c\/p\u003e\n\u003cp\u003eThe cup holder is designed to be mounted inside the center console.\u003cbr\u003eThe method of installation is left to the buyer’s discretion.\u003c\/p\u003e\n\u003cp\u003e🧩 Product Features\u003c\/p\u003e\n\u003cp\u003eHolds 2 × 500ml cans\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Skoda Octavia 1\u003c\/p\u003e\n\u003cp\u003eDurable ASA plastic – heat and UV resistant\u003c\/p\u003e\n\u003cp\u003eClean OEM-style design with embossed Skoda logo\u003c\/p\u003e\n\u003cp\u003eLightweight yet strong construction\u003c\/p\u003e\n\u003cp\u003eNon-OEM, aftermarket product\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003e1 × Skoda Octavia 1 dual cup holder (finished 3D printed part)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket 3D printed part – not an OEM product.\u003c\/p\u003e\n\u003cp\u003eMinor print artifacts may be visible.\u003c\/p\u003e\n\u003cp\u003eOptional painting is recommended for customers seeking a flawless appearance.\u003c\/p\u003e\n\u003cp\u003eVehicle compatibility is the buyer’s responsibility.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56639406932351,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/sk1.png?v=1766982432"},{"product_id":"bmw-e34-double-cup-holder-insert-center-console-upgrade","title":"BMW E34 Double Cup Holder Insert – Center Console Upgrade","description":"\u003cp\u003eBMW E34 Double Cup Holder Insert – Center Console Upgrade\u003c\/p\u003e\n\u003cp\u003eThis custom cup holder is designed specifically for the BMW E34 center console and allows you to securely hold two drinks in a tight OEM-style fit.\u003c\/p\u003e\n\u003cp\u003eIt fits directly into the factory console opening and blends cleanly with the original interior design without interfering with handbrake operation or seat movement.\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed aftermarket accessory produced in ASA plastic – offering excellent heat resistance and UV stability, making it ideal for long-term automotive interior use.\u003c\/p\u003e\n\u003cp\u003eAs with all 3D printed products, minor print artifacts or layer lines may be visible. For a perfect factory-like appearance, optional painting is recommended.\u003c\/p\u003e\n\u003cp\u003e📏 Compatibility\u003c\/p\u003e\n\u003cp\u003eVehicle: BMW E34 (5 Series)\u003cbr\u003eCapacity: 2 × standard cans \/ bottles\u003cbr\u003eLocation: Center console\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003eOne BMW E34 double cup holder insert\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket 3D printed part and not an OEM component.\u003cbr\u003eMinor surface marks or layer lines may be present due to the 3D printing process.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56639413092735,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/bmw5.png?v=1766985854"},{"product_id":"bmw-e28-double-cup-holder-insert-center-console","title":"BMW E28 Double Cup Holder Insert – Center Console","description":"\u003cp\u003eE28 BMW Cup Holder Double Insert – Center Console\u003c\/p\u003e\n\u003cp\u003eThis double cup holder is designed specifically for the BMW E28 center console and provides a clean, OEM-style solution for holding two drinks securely.\u003c\/p\u003e\n\u003cp\u003eEach cup opening features an internal diameter of 67.5 mm, making it ideal for standard cans and most drink bottles.\u003c\/p\u003e\n\u003cp\u003eThe holder fits directly into the original console opening and does not interfere with the handbrake or seat movement.\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed aftermarket accessory manufactured in ABS offering high heat resistance, rigidity, and long-term durability inside classic BMW interiors.\u003c\/p\u003e\n\u003cp\u003eAs with all Printed parts, a subtle matte texture and minor print artifacts may be visible. For a factory-smooth appearance, optional painting is recommended.\u003c\/p\u003e\n\u003cp\u003e📏 Compatibility \u0026amp; Dimensions\u003c\/p\u003e\n\u003cp\u003eVehicle: BMW E28\u003cbr\u003eLocation: Center console\u003cbr\u003eCapacity: 2 × drinks\u003cbr\u003eCup opening diameter: 67.5 mm\u003cbr\u003eMaterial: ABS\u003cbr\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003eOne BMW E28 double cup holder insert, printed in ASA-CF and ready to install.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket 3D printed part and not an OEM component.\u003c\/p\u003e\n\u003cp\u003eMinor surface imperfections may be present due to the 3D printing process.\u003c\/p\u003e\n\u003cp\u003ePainting is recommended if you want a factory-grade finish.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56657951162751,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/e28.6.png?v=1767229284"},{"product_id":"honda-fit-2015-2020-large-bottle-cup-holder-32oz-nalgene-hydroflask","title":"Honda Fit 2015–2020 Large Bottle Cup Holder – 32oz Nalgene \/ Hydroflask","description":"\u003cp\u003eHonda Fit 2015–2020 Large Bottle Cup Holder – 32oz Nalgene \/ Hydroflask\u003c\/p\u003e\n\u003cp\u003eThis large bottle cup holder is designed specifically for the 2015–2020 Honda Fit and provides a secure mounting solution for oversized water bottles that do not fit the factory cup holders.\u003c\/p\u003e\n\u003cp\u003eIt is ideal for 32oz Nalgene, Hydroflask, and similar bottles with approximately 94mm diameter, keeping them upright and stable while driving.\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed aftermarket accessory produced in ASA plastic, offering excellent heat resistance and durability for everyday vehicle use.\u003c\/p\u003e\n\u003cp\u003eAs with all 3D printed products, minor print artifacts, layer lines, or surface marks may be visible. For a perfect factory-like appearance, optional painting is recommended.\u003c\/p\u003e\n\u003cp\u003e📏 Compatibility\u003c\/p\u003e\n\u003cp\u003eVehicle: Honda Fit\u003cbr\u003eYears: 2015–2020\u003cbr\u003eBottle size: 32oz Nalgene \/ Hydroflask (~94mm diameter)\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003eOne Honda Fit large bottle cup holder insert\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket 3D printed part and not an OEM component.\u003c\/p\u003e\n\u003cp\u003eAlways measure your bottle diameter before ordering.\u003c\/p\u003e\n\u003cp\u003eMinor surface imperfections may be present due to the 3D printing process.\u003c\/p\u003e\n\u003cp\u003ePainting is recommended if you want a factory-grade appearance.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56658015846783,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/ft4.png?v=1767235615"},{"product_id":"toyota-corolla-e120-center-console-cup-holder-double-or-single-cup-tray","title":"Toyota Corolla E120 Center Console Cup Holder – Double or Single Cup + Tray","description":"\u003cp\u003eToyota Corolla E120 Center Console Cup Holder – Double or Single Cup + Tray\u003c\/p\u003e\n\u003cp\u003eThis center console cup holder is designed specifically for the Toyota Corolla E120 (mid-2000s) models that were delivered without factory cup holders in the cubby next to the handbrake.\u003c\/p\u003e\n\u003cp\u003eIt installs directly into the original console cubby with the lid and gives you a clean, OEM-style solution for everyday use.\u003c\/p\u003e\n\u003cp\u003eYou can choose between two versions:\u003c\/p\u003e\n\u003cp\u003eDouble Cup Holder – holds two drinks\u003c\/p\u003e\n\u003cp\u003eSingle Cup + Small Tray – one cup holder with an extra trinket \/ storage compartment\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed aftermarket accessory produced in ASA plastic, offering excellent heat resistance and durability for automotive interiors.\u003c\/p\u003e\n\u003cp\u003eAs with all 3D printed products, minor print artifacts, layer lines, or surface marks may be visible. For a perfect factory-like appearance, optional painting is recommended.\u003c\/p\u003e\n\u003cp\u003e📏 Compatibility\u003c\/p\u003e\n\u003cp\u003eVehicle: Toyota Corolla E120\u003cbr\u003eYears: Mid-2000s (e.g. 2005–2007)\u003cbr\u003eLocation: Center console cubby next to handbrake\u003c\/p\u003e\n\u003cp\u003e📦 What You Receive\u003c\/p\u003e\n\u003cp\u003eOne Toyota Corolla E120 cup holder insert in the selected version\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e⚠️ Important Notes\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket 3D printed part and not an OEM component.\u003c\/p\u003e\n\u003cp\u003eDesigned for the factory cubby with lid – verify your console layout before ordering.\u003c\/p\u003e\n\u003cp\u003eMinor surface imperfections may be present due to the 3D printing process.\u003c\/p\u003e\n\u003cp\u003ePainting is recommended if you want a factory-grade appearance.\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Double Cup Holder","offer_id":56663050748287,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":true},{"title":"Single Cup + Tray","offer_id":56663050781055,"sku":null,"price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/tc3.png?v=1767318054"},{"product_id":"fiat-ducato-double-bottle-holder-insert-console-cup-upgrade-for-0-5l-bottles","title":"Fiat Ducato Double Bottle Holder Insert –  Console Cup Upgrade for 0.5L Bottles","description":"\u003cp\u003eFiat Ducato Double Bottle Holder Insert –  Console Cup Upgrade for 0.5L Bottles\u003c\/p\u003e\n\u003cp\u003eUpgrade your Fiat Ducato interior with this custom double bottle holder insert, designed to securely hold two 0.5L bottles in the factory center console area.\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed automotive accessory made from ASA, offering excellent heat resistance and durability – ideal for daily driving and hot climates.\u003c\/p\u003e\n\u003cp\u003eThe holder installs in minutes and provides a clean OEM-style look while eliminating bottle movement and rattling during driving.\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed item and may have minor print artifacts. Optional painting is recommended for a perfect finish.\u003c\/p\u003e\n\u003cp\u003e🔹 Fitment\u003c\/p\u003e\n\u003cp\u003e✔ Fiat Ducato (X250 \/ X290)\u003cbr\u003e✔ Model years: approx. 2006–2024\u003cbr\u003e✔ Fits factory center console lower storage area under the climate controls\u003c\/p\u003e\n\u003cp\u003eIf your dashboard layout differs, please send a photo before ordering.\u003c\/p\u003e\n\u003cp\u003e🔹 Versions \/ Options\u003c\/p\u003e\n\u003cp\u003e• Left-hand drive\u003cbr\u003e• Holds two 0.5L bottles\u003cbr\u003e• Color: light black \/ glossy ASA finish\u003c\/p\u003e\n\u003cp\u003e🔹 Installation\u003c\/p\u003e\n\u003cp\u003eClean the factory console surface\u003c\/p\u003e\n\u003cp\u003eInsert the holder into the lower console opening\u003c\/p\u003e\n\u003cp\u003eOptional: use double-sided automotive tape or a small amount of silicone for a tighter fit\u003c\/p\u003e\n\u003cp\u003eNo cutting or permanent modifications required.\u003c\/p\u003e\n\u003cp\u003e🔹 Notes\u003c\/p\u003e\n\u003cp\u003e• Designed for everyday bottles and small cups\u003cbr\u003e• Heat-resistant ASA material – suitable for summer temperatures\u003cbr\u003e• Aftermarket accessory – not affiliated with the vehicle manufacturer\u003c\/p\u003e","brand":"Car Culture Cyprus","offers":[{"title":"Default Title","offer_id":56702878122367,"sku":null,"price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1642\/4575\/files\/duc1_a26cb104-e009-49cf-8cc2-a68f74b491c1.png?v=1767851296"}],"url":"https:\/\/www.carculturecyprus.com\/collections\/cup-holders.oembed?page=6","provider":"Car Culture Cyprus","version":"1.0","type":"link"}